Thanks for assuaging years of guilt about my table saw re-sawing. I’ve hidden the fact from everyone including my wife. I’m through re-sawing late at night and in private and am now proud of my alternative saw style. Bandsaws are for making cute deer and rough-cut-curved and roundly-shaped things. If you want it straight table saws are great! Good video as always.

@NewtonMakes

7 ай бұрын

Start by being blunt with your friends and family. "Hi, I'm a table saw resawer." It's what I did!

@paulfrancoeur9852

5 ай бұрын

Nice "coming out" @garyfairbrother5532! Love your comment. This is my first viewing of Newton's channel and I liked it very much. NEWTON: I especially liked when you talked about blade drift and replied to the multiple of comments which basically state that drift does not happen. There you said "Well, ... It happened to me." Personally, I think that the kind of wood(wood species) and type of cut matters. Lately on the bandsaw (same as yours) I was ripping a freshly felled piece of poplar (riff-cutting, more precisely) and my blade drifted badly. I was sawing a piece about 5" by 8" by 20" on the 5" face and had serious binding of the blade towards the fence. But when I quarter-sawed the same piece of poplar (on the 8" face) there was no drift at all!!! @garyfairbrother5532: Question: Are you really the five thousand five hundred and thirty second garyfairbrother? LOL

@paulfrancoeur9852

5 ай бұрын

Sorry: I meant "flat cutting" not riff-cutting.

After 45 years as a professional woodworker, I couldn’t agree with you more. It’s great to come across a guy who is spot on with everything he says.

@augustwest8559

3 ай бұрын

Bullshit

@dwpalme2670

Ай бұрын

Bullshit

You are spot on about brain drift. It's how I recently learned you can't touch the bandsaw blade.

@NewtonMakes

7 ай бұрын

I have ADD so I know my limitations 🤣

@paulfrancoeur9852

5 ай бұрын

Hey, @georgestgoerge5110: Yes, you can touch the blade. The point you are trying to make is that you shouldn't touch it. (Hope you did not hurt yourself too badly.)

@kwilliams2239

2 ай бұрын

With a decent, properly tuned bandsaw, drift shouldn't be a problem.

Right on! I also don't have a band saw, though I would like one. Now I can resaw and use my Japanese pull saw to cut the strip left from the table saw.

@NewtonMakes

7 ай бұрын

An excellent choice

I saw you do this a while back and I started resawing this way and love it. Thank you for the video.

Thanks so much for taking the time to talk about your craft

Thanks heaps. I used to always resaw on the the table saw but have been battling the bandsaw for several years. You’ve reminded me why I did it on the table saw. I will now go out and save myself several hours of misery in the shop to resaw veneer for a couple of dozen kitchen door and drawer panels.

Great Video, Like you, I have been doing this for a very long time. When I first started woodworking, I had a decent table saw with adequate power and a cheap bandsaw which didn't have much power and terrible guide bearings. I like re-sewing material to get grain matching, so by default, I discovered this method. My equipment has improved but my methods have not changed. Thanks for sharing this method with other woodworkers.

Great informative video. I've been struggling with the drift even with a large resaw blade in my bandsaw. Ill be trying out this method next. Thanks for all the videos

You did a really nice job of anticipating and addressing all the arguments against your approach. You convinced me to give table saw re-sawing a try.

@augustwest8559

3 ай бұрын

Resawing on a tablesaw is a waste of wood. This KZreadr has a lite weight bandsaw. He wants the success of a Bigger better saw. He’s new.

Great video. Thank you for sharing your views and preferences. I always learn something from you.

after decades of using the tabe saw, fnally purchaced a band saw to resaw and your video is very helpfull - best of both world doing resawing - your way

Great point! I'm going to start using the blended resaw process! Thank you!

Loved your vid. taking down boards on the jointer and thicknesser is slow and LOUD!!! I take down my 25mm boards on the table saw ( usually down to 18mm ), a quick sand with 80 grit with my orbital sander and all is good. My wife uses the offcut and I am happy with the time saved. regards, Allyn Hansen New Zealand.

I enjoyed your video. In particular, I appreciate that you are simply trying to get a message across - I do these things because I find them to work well for me. I also appreciate that you encourage everyone to find the joy in their hobby. And … I watched the entire video before commenting. ;-)

This is exactly the method i use as well for many of the reasons you mention. At the end of the day, the results are good.

Thanks for the video. Pros and cons are useful to determine what methods I would use. If I were doing production work a lot of what you listed would need to be considered. Since I am doing mostly personal projects, I weigh the personal satisfaction of the process. I really like that you encouraged us to use the methods and tools that we find satisfying, especially for someone like me who is into perfection and doing things the "right" way. I'm going to kick back, relax and enjoy myself in the future.

Great video! I don't have my bandsaw anymore and for the 1st time since geyting rid of it I need to do some resawing. I was planning on using my unisaw with an auxilary fence to resaw the boards and was nervous about the safety aspect. Thanks for putting my mind at ease. I totally plan on leaving ~1/2" in the middle and just using a handsaw to get the rest of the way through. Thanks again.

I like your method a lot. My big 17” bandsaw is great for rough resawing on logs and really big boards, but for finer work, not so much (for all the reasons you cover here)

I've been resawing with just the band saw for years even though Ive seen this method before. I think I'm going to come back and try it with a table saw for some of the benefits you mentioned. One that I didn't hear you mention is that I sometimes get thicker boards open up or close down if there are any internal stresses. Knowing which way it's going to go before I get to the band saw will help me prepare better either by having a wedge on hand if it's going to close down or biasing my cut if it's going to open it up

I use your system as well and I tend to use the bandsaw just the same. Your general comments are great and I say sort of the same things to myself daily. I might recommend watching Seths' Stockroom Supply Bandsaw demo. They are in Ontario Canada. I come away impressed by this.

Thank you so much for that advice, I have a Laguna saw and a Laguna blade and I have tried till I am blue in the face to get no saw drift. I don't know whether it's the blade or what but I have watched so many KZread videos who all say something slightly different and I think that yours has hit the nail on the head.From now on I will use a thin kerf blade and finish it off with the bandsaw.

Interesting, Billy. I've seen you use this method many times. I figured this is why, but you just validated it. Bill

Excellent video. Also, I'm in love with that double feather board!! Just went and ordered one on Amazon.

I have a Laguna 14 inch bandsaw that has a foot brake. Absolutely brilliant. I wish there was an equivalent brake on all my machines. It also has exceptional dust collection. I'll take my bandsaw with a king resaw blade over an exposed table saw blade any day. It really doesn't take much effort to thickness away the tiny ridges.

I can finally come out of the closet and admit I use the thin kerf blade on my table saw to resaw then to the band saw. Thank you. You have given my life new meaning! :)

New subscriber here. I was convinced that I’d like your channel when I heard you suggest trying something new to reduce frustration doing it the way “you’re supposed to” (I’d often thought to try resawing on the table saw, but figured this was “wrong”); and your desire to distinguish between fact & opinion. I’ve got some resawing to do today & will try your method. Thanks for sharing your method.

Thanks for making that video after i added to the many people who asked about it. You definately made many valid points - so ill give it a go next time.

@NewtonMakes

7 ай бұрын

I get why people ask. If enough are asking then I should take time to answer. 👍

Great video! I’m convinced to give it a try ! There’s another reason to resaw, and it’s my primary use…not book match, but it’s cousin boxes w grain flowing around all 4 corners.

@NewtonMakes

7 ай бұрын

Absolutely, and I have video on that so I should have mentioned it.

I have some resawing to do today. I’m going to try the suggestion of changing tablesaw to a thinner blade before bandsaw. Makes good sense. Thanks

Thanks for the tip. I am about to do some resawing and this should help.

Very good video, awesome technique.

Great video as always thanks for the great tips

Amen, agree with your take 110%. Hobby WW but I’ve been doing this 60 years and still have all of my fingers 😅. Much simpler and no blade drift using Table Saw and clean up on band saw and surface planer. GREAT TIP, KEEP UP YOUR GOOD WORK! 😊

Spot on Video!! Thanks for speaking out.

Yeah this makes a lot of sense, I’ll be doing this way for now on, thanks for the video

Great video, Billy. Thanks for sharing it.

@NewtonMakes

7 ай бұрын

Thanks for watching 👊👍

I never thought about putting a circular saw blade on my table saw. Food for thought. Thanks for the video.

I learned to resaw watching your videos. Works great. Apart from the wide board too big for my baby bandsaw. That was hard work with the pull saw.

@davidburris120

7 ай бұрын

Same

Excellent video! I would add that by using a Saw Stop table saw, one is much safer cutting on the tabke saw than the bandsaw. Thanks for posting this!

Great video, nice coverage of the pros and cons. I still like to resaw on a bandsaw. I have to so not an issue. Cheers

Thanks, I'm glad to hear that I'm not the only one that resaws that way.

You got it right! I am retired so I look on my computer and see how other people do certain jobs. I found out that some people handle the facts mighty reckless.I also see that some people have a better idea than I had.

Billy great video as always! 👍👍👍👍👍

I feel more comfortable resawing on the bandsaw, hope to upgrade my tablesaw someday. Great video!

@NewtonMakes

7 ай бұрын

Then that's the perfect method! 👊

95% consistent with my own experience and it's good to hear some validation. The difference is I use a full-sized thin kerf rip blade (3/32) which is more 'general purpose' than a circular saw blade i.e. doesn't need to be changed out. Also my old bandsaw was kept for use with the curve-cutting smaller blade as that sort of stuff tends to be smaller anyway. My Resaw King (and drift fence) on the Laguna handles smaller/easier resaw tasks OK, but for bigger more exacting projects, the table saw method is definitely preferred, more consistent, and less risk.

@markcummins8061

7 ай бұрын

Ah of course. Thin kerf rip blade. Not sure why i didnt realize the obvious. Thanks!

@NewtonMakes

7 ай бұрын

I use one of those too. But I recently saw the newest version of my circular saw blade is only 0.054" wide! Wow!

This is good. I just picked up a bandsaw and a nice 3 tpi blade specifically to resaw. I'm easily loosing 1/8 by the time I'm done planing anyway because I'm still learning how to get a straight cut with tbe BS, may as well let the tablesaw take that out for me. I bet I actually get a better yield.

Excellent video! I've done it both ways but not owning a bandsaw and having to use friends, I'm switching to your table saw method. I built your fence last night, ordered a Suizan Ryoba saw, and presto change-o, I'm all set.

I resaw at both the cabinet saw and bandsaw. It depends. One thing’s for sure. The book match is better at the bandsaw. A well tuned bandsaw with a 3 to 4 teeth per inch hook blade will leave the surface fairly smooth. Good video.

Great video. Hope your always lucky to your work 👍👍

I have done it a couple of times on the table saw, using the method you demonstrated, but I just don’t like putting a board on edge and pushing it through the blade. Once past the feather board there’s nothing to push it towards the fence and if (when) tension is released it can get wonky really fast. I have an old underpowered Delta clone bandsaw with a riser block and I use the Woodslicer bandsaw blade for all of my re-saw operations. There’s more than one way to skin a cat and whichever way works best for each individual is the right way.

@kennethfisher7013

7 ай бұрын

If you're not cutting all the way through you can put a feather board halfway up the board at the blade. This will hold the board in place and not pinch the kerf. I saw him cutting that small piece on the table saw just holding it with the push stick and thinking "that's really going to hurt when it kicks back and hits him".

1000% agree. I wish I didn’t sell my table saw. Although I would hardly call my old Shopsmith a table saw:-0 it seemed dangerous, HOWEVER I love this idea of yours!!! I have the Laguna re-saw blade on a 14" Rikon and still get some drift because of the hardwoods I typically use. I need to purchase a table saw and use this technoque. Thanks SO MICH FOR SHARING

Great video. You are one of my favorites.

Nice vid. I have one heck of a time resawing on a bandsaw.

I wondered if anyone else used a thin kerf circle saw blade before going to the bandsaw to finish the cut. Best method that I have found too after 40 years of horseing around with it.

this is very helpful

OMG thank you. So easy. So fast. Thank you

Excellent tip.

Very informative thank you. Might be worth checking maximum rpm of circular saw blade vs max rpm of same blade size on table saw for safety reasons. That said, it's always possible to make a table saw by bolting a circular saw under a table (loads of videos on youtube). Thanks again; you've probably saved me hours of re-finishing (I have over 1000 small pieces to re-saw :)

destroyed a 3/4 piece of walnut trying to get 2 pieces as close to 3/8 as i could - wound up with some skinny 1/4 because i didn't know the proper way to resaw, until now! Thanks for the insight!!!

That's the way I learned how to do it. I took woodworking courses at Cerritos College and one of my instructors Tony Fortner taught me that exact method. Use the table saw to get most of the way through then finish on the band saw. It has always worked for me.

thanks, good points

I like this guy. Lots of good points. I always have problems setting up my bandsaw to for resawing boards. The circular saw blade tip was great. Is that blade thinner than a thin kerf blade?

Funny, and way true! I noticed the press you made. Are there plans for this? Where did you get the press screws? Thanks, and keep up the good stuff.

Totally agree...it's a bit scratchier on table saw but if your mindful and listen to the machine it's the way to go imo...

Wanting to be a "Real Woodworker" I went the route of milling air dried wood. More time consuming but lower initial costs. Even went to chainsaw milling. Watched KZreadrs resaw and followed the common consensus. Bandsaw for long resaw cuts, especially when the cut is almost the total hieght of my ability to cut. I've had all of the problems. sometimes drift other times not. The table saw with a thin kerf blade is efficient . Your video is spot on. Murphy Tested and Recommended. Would add that cutting rough sawn lumber to approximate finished sizes improves my efficiency, while Murphy my mentor does not. Thanks for posting this.

I have the same bandsaw as you. Maybe the dame tablesaw if you have the 3hp PCS. I have had mixed results with using the bandsaw to resaw, I usually use the tablesaw method myself. So I would agree with you 100% on thos one. 1 also hate changing blades on the bandsaw. I usually keep a 3/16 4tpi skip tooth on mine or a 3/8.

@NewtonMakes

7 ай бұрын

That's what I keep in mine as well.

Great video. I am not a huge fan of resawing on the bandsaw, and find it easier and faster on the table saw. I would also argue that having a table saw is more common than a bandsaw. What I personally like to do it at my blade height barely under half of the width of my board. Enough that it still holds together, but also that the sliver holding the two pieces together can simply be broken by gently tilting the sides back and forth. When done like that, clean up is minimal and can even be done with a small plane or a scraper!

@bobshomewoodshop7996

7 ай бұрын

Sometimes I get the cut that close that I'm able to break the two pieces apart. From now on, I'll work at doing it on purpose.

Great information.

I have tried all the things, I still get drift, and it is frustrating! Thank you for the Circular saw blase on a table saw, GENIUS!! I don't do a lot of would working , but I am always cutting knife scale out of call blanks I get 2-3 times the handle material for the same price as buying book match scale sets. Thank you.

I agree 100%. I resales like you do mainly because I feel more comfortable doing it that way. GO BLUE!!!!!

@NewtonMakes

7 ай бұрын

As comfortable as Harbaugh in Walmart khakis.

I really like you're approach to re-sawing. Sadly I don't own a planner and I'm not skilled at hand planning. In this case do you have any tips or tricks for making the final separation cut on a band saw? I currently use a 9" lower-end band saw, but it works just fine for most of my projects. I would also need to follow-up with my orbital sander or belt sander depending on how clean a cut I can achieve on the bandsaw. Anyway, thanks for the great content. :)

8:19 😂 the comic type speech bubbles! There's a whole story you could imply with the lady telling the guy to leave a comment, lol Love it

I have the privilege of owning a RIKON 10-340 for resawing, but it too has blade wander even with a 3/4" blade. Most time I do what his guys does and remove the bulk of the material with the table saw and wiz thru with the band saw to remove the rest. But I did learn to use a circular sawblade, although that leaves a bigger bridging piece, to reduce the kerf of the saw blade,

MY exact thoughts . . . thanks.

Great video. I also prefer to at least start a re-saw on the table saw, also with a taller fence addition. However, if the board is not too long I'll do at least one low pass on the ends. That makes it so easy to locate the bandsaw blade at the start. It also means the cut is finished before my fingers get near the bandsaw blade.

thank you will try this i get crazy drift on practice pieces just one question what blade on table saw should i use for best result? and how thin could i go?

Awesome .... Thanks

The last tip is the most important! And so often we forget it in our hobbies

On this topic. I am considering getting a new band's hall. Cancel debating between getting a Laguna, 14 inch band all or or Spring. A little bit more and getting grizzly 19 inch band saw. They both have about the same Resaw but the 19 inch saw can cut more larger wood Horizontal And has a 3 horsepower motor instead of a 2 and a 1/2 horsepower. It doesn't look like I can get the Laguna blade for it. So I'm looking for the opinion. Does that blade really make that big of a difference

Your suggestion to make the cuts on the table saw first does work and I have used this method. However, I prefer to just change my band saw blade, set up a guide and resaw as much as needed. If I lost concentration while running a power tool it time to shut it all down and take a break.

Excellent video, and great info. Thank you for sharing a reality check. I have always been in the camp of all the waste…. But using the bandsaw exclusively and cleaning up the cut easily makes up for the reduction. One thing I do want to say, you using your fingers to push through drove me nuts. I have the scar from nine stitches on my fingers from doing just that on a bandsaw, when the saw found a soft spot in the wood, and suddenly sped through the end of the cut. You should use a push stick on the bandsaw too. Again, thank you for great info.

Hi Did you make the press used in this video or did you make it please?

Thank you.

I prefer to resaaw the same way you do. But I add one safety consideration. (Always thinking about safety as I teach Woodworking in a school.). As I near the end of my cut on the Band Saw, I use a scrap wood block to push the piece the last two or three inches, rather than reach around and pull from the back side of the blade. Every saw Knick on the scrap block is a reminder that they kept their fingers safe.

A great common sense approach to the task...

Do you feel that there is a blade height limit with TS method? That is, to ensure that the blade stays at 90 degrees and doesn't get warped offline by a hardwood piece, for instance, when it is fully extended?

I completely agree.

Amazing🙏

When going to bandsaw to finish the cut are you aiming for the center of theTS kerf?

I now feel better about using the table saw 2 resaw! 🎄

Good Slstuff fosho!!! Right out of the park!

I understand your pro/con list mostly, but do you not cut oversized and sand to smooth when resawing on the bandsaw? If I were aiming for a 1/8” board for a project, I do not expect it will be smooth enough for most operations so when sanding you will go under that. Is this not a concern for your projects?

the band saw your using says its 12 or 14 inch cut but its a little under powered. laguna 220 volt will roller fence and power feeder will allow you to cut hundred and hundred of board feet per day and has a auto stop. would you buy a black and decker table saw to make stuff or a high end table saw. same thing..

Good video. .same issues. Bandsaw drift is real

Thanks for the video, I really like this idea. For me, it seems like there are less places for me to screw things up doing your way. Lol.

Hey I have done it both ways and the taller boards gets a trip down the table saw while my less tall boards may just get the band saw. Gads that broken blade really went wanky on you. Thanks for sharing and I need to get a thin kerf blade for my table saw to reduce wood loss.

Ugh, it’s your shop, you can do it however you want. I know you have to keep the masses happy but in the end, it’s your shop, do it how you want to.

I used to keep a combination blade in my tablesaw, but after I did my first resawing with a brand new Freud rip blade I was so impressed with the smoothness of the cut that I have never put a combo blade back in the saw. I have a compound miter saw and radial arm saw that I use for crosscuts. I do as in the video here and have the table saw do most of the work, finishing off on the bandsaw, then running the pieces through the thickness planer for final surfacing.

@NewtonMakes

7 ай бұрын

I often use a rip blade too

I never considered using a circular saw blade on the table saw! I suppose thin-kerf table saw blade would achieve about the same result as well. Interesting stuff.