Michael, thank you thank you THANK YOU. I have had my saw for 20+ years and it never cut straight. I spent days fiddling with it years ago and came to the conclusion it was just how it was. It never made sense to me. It is a mechanical system. If the wheels are true, then the blade HAS to cut straight! You know what it was. The table mounts. For the first time EVER, my saw cuts as it was designed. I can't believe the number of people that have elaborate processes to adjust your work to a misadjusted table. Again, thank you. This bothered me every single time I used the saw and hence, I didn't use it very often. I feel like I just got a new tool!

In all these years I've owned and used a band saw, I never realized you could adjust the table alignment to the blade! Thank you FWW for this video.

I am a beginner with wood working and enjoy milling my own boards from small logs. This makes so much more sense than adjusting your fence for drift. I will do this first thing tomorrow. It will make my current project and future projects so much easier. Thanks a million!

I have been struggling with an old bandsaw I bought from my father 6 years ago, and have tried all the “tricks” I have seen online. Nothing seemed to “Fix” the drift. Until NOW. Thank you for a very informative video. My saw now cuts straight and true. DC

I've been in class with Michael fortune and Marc Adams woodworking School in Indianapolis. Excellent instructor very knowledgeable in all aspects of fine woodworking. This video on setting up a bandsaw is the only one you need

Great tutorial. I especially like the fact you pointed out about using the Miter gauge and slot. I am going to try and write this up so that I can print it out and keep it with my saw for future reference/generations.

Every owner of a bandsaw needs to watch this. Thanks Michael 👍

This should be the 1st video every bandsaw owner watches to get started! Very good info and I had mine running like a charm in no time.

I've been suffering for month to get a straight cut, so this is the salvation. Bless this master for sharing the knowledge.

I have had nothing but frustration trying to re-saw with my bandsaw for years. I had tried every other solution I watched on KZread . This, my friend, absolutely solved my problem. I can't thank you enough for this solution . It works like a charm now.

@chrisc9611

3 ай бұрын

Did you try what Mr snodgrass said regarding blade drift? He said to put the hollow part of the teeth on the centerline of the top wheel. Don’t worry about the bottom wheel. Be sure to watch his videos

PROBLEM SOLVED !!!! Thank you for making this video.... such a commonsense thing to do that wasn't even on my radar with a bandsaw. I had always been told to set my blade gullet on the centerline... I know have it set per your instruction and my cuts have been spot on with no drift or wander. You are much appreciated !!

Extremely well explained and demonstrated. Some of the best advice for setting up a bandsaw I've seen. I'm glad I stumbled into this video .... Cheers!!

I just bought a used Jet 14" bandsaw that I am having to set up as if it were new out of the box. EVERYTHING is out of alignment. No wonder the fellow sold it! This video deals with an issue I have not seen anywhere else. Thank you so very much!

The best bandsaw guidance I have ever heard. Your advice solved years of recurring problems. I now live by this advice!

I messed up my bandsaw (dumb mistake) and was having a hard time getting it to cut properly again. Watched a lot of videos and this one enabled me to solve all the problems. Thanks very much!

that table adjustment tip is something I never heard of, good info! thnx

Thank you for such a simple and clear guide to set up my bandsaw, now it is running really well! 👌

WOW! What a terrific video and absolutely dead-on as to what I needed. Yep, I've been my bandsaw as described, not realizing the problem which might arise. Thank you for your expertise!

Michael Fortune is a master. Years ago I read an article by him in Fine Woodworking explaining how to set up a bandsaw. I hated my bandsaw until I followed his suggestions in the article. My saw has worked perfectly for years. I love to use it. The blade he uses most is a 1/2" skip toothed 3" T.P. I. Thank you Michael.

@robeb4

3 жыл бұрын

Do you recall what issue of FWW Fortune's article was in? Thanks.

@robd7703

3 жыл бұрын

robeb4 I still have the article. I will find it and let you know.

@robd7703

3 жыл бұрын

robeb4 it is Fine Woodworking special issue “Tune Up Your Tools 2011. Article is titled “ Soup up your bandsaw by Michael Fortune If you are unable to get the article I could copy and Mail to you. Bob

@robeb4

3 жыл бұрын

@@robd7703 Thanks, Bob. I'm going to first try reorienting my bandsaw table per Fortune's suggestion in the video, and if that doesn't work, will take you up on your offer to mail me a copy of Fortune's article.

My first job this weekend, thank you so much!

Thanks for the help. I’ve been trying to dial mine in and failing for a month. I’ll shake you hand and thank you Sir. I appreciate the schooling you just gave me. And will use it from now on.

Thanks Michael. Never had such a clear explanation and nobody seems to talk about table alignment. Merry Christmas.

Michael, brilliant video made a lot of sense to me I've been struggling with mine for a few days now so I tested out your method I would just like to say you are a wizard thank you, John

Excellent information! I had not seen this solution explained anywhere before! Thank you!!!

Watched this video yesterday before re-sawing some nice 2" x 5" hard maple that I plan to use for a furniture project and am I ever glad I did!!! I started cutting and within the first two inches, the blade drifted 1/4" away from the fence. By the way, this is a new saw that I had only cut a couple of pieces on until now. So, I backed it out and set the blade back to the center of the upper wheel as you said. I tried a sacrificial piece and couldn't believe the difference. Started over (after a few corrective moves...) and the saw ran straight and true for the remaining 8 feet of maple. Then I did the second piece and achieved the same results. Thanks so much for a great tip, I'm already passing it on to other woodworkers that I know!!!

As a novice, [at 74] with a bandsaw, this is most educational, and helpful. Thank you.

Best explanation ever! And the first guy not playing with saw band guidance only! Thanks and greets from Germany 👍 But excuse me, I have to go to my workshop now, checking my table angle 😊

Great information, I’ve watched six others correct for drift, no one came close to this perfect setup video! Well done!

@cheeesefunnel

2 жыл бұрын

how do u figure this?? the tip of teeth are supposed to be in middle line of wheel he has his teeth in the wrong position also the adjustment of the blade should be low to the wood ,

@spudpud-T67

Жыл бұрын

@@cheeesefunnel I've tried many ways to remove drift but unlike Michael, the one that worked (on advice) was to center the gullet of the tooth, not the blade center. So the blade is slightly further back than shown here. Imagine the stability of a piece of cardboard sheet in the wind. If you hold it in the center or the back it will flutter, only holding it at the front (closest to the source of the wind will you have control. I think that analogy is similar to the forces of the wood (wind) on the blade (cardboard) and how it is supported in the cut. I understand that setting the gullets of the teeth in the center, means the support guides are almost redundant.

Very good instructions. A good teacher speaks slowly with only the words needed to convey one’s information. Only a handful of good teachers out there. At least on KZread. Much appreciated lesson. Fortunately my issue today was only realigning my fence with the mitre slot.

Thanks. You have just cured my bandsaw faults!! But as it happens, it was an education to deal with it as it was as now I am expert at guiding the wood by hand! Time to get lazy again. Thanks, a really helpful video.

This is the best video that I have found on fixing band saw blade drift. Other videos have you adjust the fence to correct for drift. But this is a symptom of the problem. The cause is really the table misalignment to the blade.

Thank you very much for your great tip on tuning my purchased used DW876, I had to disassemble it entirely for a complete overhaul and now that it is like new I have tuned it following your advice. Best regards, take care of yourself and long live your chain !!! Alain from Switzerland

Thanks, Michael and FWW. This is a great video. Owners of a SHOPSMITH bandsaw need to be aware that their saw is unique in that there is no adjustment for blade tracking. The saw is designed so that every blade runs near the back of the wheel and against a pair of "Auto-Track" bearings that are in the arm of the saw. Likewise, the backup bearings below and above the table aren't adjustable forward and back because they don't need to be; all blades run to the back and against the bottom bearing, and if the saw is properly aligned, just ahead of the upper bearing. It's pretty sweet, actually. Scott

Thank you, this is exactly what my bandsaw is doing, this video was very helpful.

In addition to getting the blade exactly centered on the upper wheel, I have found that tightening the tension until the blade when plucked makes a musical note also helps to get a straight cut. I have resawed maple to 1/16 using these two things and a homemade resaw fence (clamped to the table like that guy from Ft Bragg describes in his book). I never use the fence guides on the table.

My bandsaw sits idle in the corner because it doesn’t track true. I’ll set it up accordingly now thanks to your video 👍

Thanks Michael I’ve been trying to fix this exact problem for weeks thank you for sharing you expertises 😊

Had my ssw since about 2005 and never understood that this was how you square up the cuts. Going to do this today!

Thanks. Someone else’s video suggested having the back of the blade gullet ride the center of the tire, but after watching your explanation I can now understand why the work piece was drifting to one side. Time to go make some adjustments and see how it goes.

Thank you for the great explanations. I will never again turn the bandsaw around using those convenient handles, lol. I also like having the bandsaw blade length on the top wheel door and the Allen key held handy with the magnet on the back. You made a subscriber out of me. Thanks again for taking the time to share this information.

This is the clearest and easiest I've seen/heard it done, Thanks Michael.

@marcuspaget

3 жыл бұрын

Natural ASMR

@101411726

3 жыл бұрын

Really?? Uhh.. this, uhh.. this here, uhh was the uhh clearest uhh you’ve ever uhh.. uhh, you’ve uhh, ever heard? Wow

@joed1901

3 жыл бұрын

@@101411726 don’t be an idiot/critic. The content shared is very helpful on this topic. If your not an expert and have ever dealt with this problem it is good to have an expert show you how to fix it. He did that very well. I’ve been frustrated with my band saw and picked up a lot from this that solved the problems.

@101411726

3 жыл бұрын

@@joed1901 watch bandsaw set up from Alex snodgrass. THAT is the clearest, and hands down, the best bandsaw set up video/explanation you will ever watch. Then watch this video again, and you’ll see why this is a terrible explanation and his commentary is absolutely uhh... awful. 🙄

Thank you! My bandsaw turned over and I have not been able to use it since cause of the drift. I never knew why till now. Saved me from tossing it. Again, THANK YOU!

I have the piece drifting away from the fence. Now thanks to you, I can address this issue. Thanks

Thank you for the exceptionally informative video. I’ve learned a whole lot!

A search brought me here. Thanks Michael. The Rikon now resaws straight. No more cutting wedges. Great video. JimE

Great info Michael, I'm looking forward to finally solving the drift problem with my new Laguna 14/12 saw.

This was an amazingly useful and informative video, thanks so much for putting this together!

I just did the adjustment and got a straight rip cut using the fence that was about as good as my table saw! Thank you!

I just bought a Shop Fox a few weeks ago. So glad this came up in my list of videos.

Thank you so much for the help. This has been a problem for years.

I took a band saw class with Michael as the instructor very nice person and a master woodworker

I'm out to the shop now to check and if need be, adjust the bandsaw tables, thank you for such valuable information!

This was explained better than anyone else. Thanks 🙏 for the info.

I had read somewhere that the blade itself can cause the cut to be off. When the blade is made the set of the teeth are not perfectly symmetrical from right/left. Whichever tooth is further out from center will be the way the cut will pull. It made sense to me and I simply left it at that. Too align the blade you would draw a straight line on a board from end to end and have one jointed edge. Freehand the cut until you could cut without adjusting. Stop the saw and draw a reference line on the table with the jointed edge. Then you would use this line to measure from to clamp a fence. I am going to try this method. This sounds good and makes perfect sense. Thank you for sharing this.

Thanks for the great info. I had never thought of aligning the table to the cut.

Thank you Sir, for this Brilliant explanation. I spent a lot of money on an new bandsaw, because the previous one was giving me an hard time on thicker wood, but I was going crazy, because of the shifting of the blade, to the point that i was not using it anymore. Now i can split 12x12 cm wood like it was done on the table saw!! Thanks again for sharing your precious experience with us.

I’m 76…never have I seen a bandsaw lesson in how to properly align a bandsaw so thoroughly…atta boy and thank you!😊

My new bandsaw drifts like crazy so I head to youtube for help. 10+ videos later, all showing different and conflicting methods, I'm no wiser. I'll try each setup in turn and hope for the best.

A great common sense approach, where you have identified and fixed the actual problem. Thank you.

Excellent tutorial, thank you for going to the trouble of making it.

A LOT of useful information I did not know! Thank you

Thank you for this video. Saw is running great now, plus I forms my 10mm socket!

Mr. Fortune, I centered my blade like you said, clamped a temporary fence parallel to the miter slot and cut straight halfway through a board. I flipped it end over end and cut from the other side and you can hardly tell where they met. My table was already correct but my blades were always centered over the gullet. Thank you so much.

@spudpud-T67

Жыл бұрын

I've tried many ways to remove drift but unlike Michael, the one that worked (on advice) was to center the gullet of the tooth, not the blade center. So the blade is slightly further back than shown here. Imagine the stability of a piece of cardboard sheet in the wind. If you hold it in the center or the back it will flutter, only holding it at the front (closest to the source of the wind will you have control. I think that analogy is similar to the forces of the wood (wind) on the blade (cardboard) and how it is supported in the cut. I understand that setting the gullets of the teeth in the center, means the support guides are almost redundant.

Finally! A guy that also realizes having the guides close to the work will help with drift! AND, it's a huge help in the safety department! Having been a toolmaker for 40+ years, always taught to set the upper guide within 1/8 of an inch above the workpiece. If you think about that, that won't allow room for your finger to get through there. It also helps keep that blade straight! So many bandsaw videos I watch, invariably they have the upper guide like 2 inches above the work... bad choice....

I just realized why my bandsaw is cutting crooked. Thanks so much for your video, it is most helpful!

Thanks Michael. Just picked up a saw. Will be able to track it now.

Great tips for adjusting the bandsaw, ive had issues and most likely because i grsb the table to move the bandsaw around, ill check it next time i use it Thanks Rob

Thank you very much for this simple and clear explanation!

Really useful, I had no idea that was the problem. I shall go out to my shed today! Thanks!

Very nicely explained with good camera work.

Great video, thanks for the info, I need to do this to my brand new bandsaw.

This was a very clear and informative video. This newbie thanks you

I have been having tracking issues with my small band saw, and thought it was the quality of the saw or maybe a blade adjustment, or even cheap blades. But never thought of how out of square the table is to the actual blade itself. I'll check on that next. Thank you.

so clear and useful - thank you.

Excellent video. Very clearly explained. Thank you !

That looks like a Rigid BS14000 as I own. My fence is different though. I really want to thank you for your excellent presentation as even I can understand it.

Great video. U might have just solved my problem with my extremely cheap tiny band saw. Thanks

Thanks for the detailed explanation of drift.

Good intel!!! My old Delta 14 probably needs this attention!!!

Thanks so much for the video - I've got my ol' faithful ship-shape and in good order once again.

Thanks for a great and very informative Video. I really like the way you teach!

Excellent video. I had no idea that could happen and how to fix it. Thank you.

Thank you for the exceptionally informative video.

Superb tutorial, Thanks. I need to do this to an old Dewalt bandsaw I have in my garage.

Thank you for this video, was just what I needed!

Mr Fortune, Thank you for your very clear explanation of the long-standing problem I've had with my bandsaw and how to properly cure it. I can't wait to get going. Thanks again.

@scottturner2529

5 жыл бұрын

Sid Stephenson did it work? I’ve tried it and can’t get a clean rip

@sidstephenson6336

5 жыл бұрын

@@scottturner2529 Hi Scott, The first thing I did was to clear out all the dust and muck then fit a new blade and re-level the table etc. Low and behold it cuts fine and true. To test it I ripped a 5ft piece of 2x1 into two pieces 5ft 1x1 to repair my garden seat slats. Absolutely no probs so I didn't need to offset the workpiece at all. if the blade is worn it seems the best thing is to replace it. I hope you can cure yours, Cheers

Thank you , thank you. I have taken the time to align everything on the bandsaw, but it was still not cutting straight. This is really good information. I have ordered a carbide teeth blade, since the teeth are larger than the blade, it also helps this issue.

Wow, I see everyone else telling me to just reposition the fence, which is just ignoring the issue and now you're saying to position the base, which is the real issue. Thank you for this. What model saw is that? It looks just like mine from the back.

Excellent video and process. Thank you for sharing...

great info, i was having this issue. going to try to fix it tomorrow!

You have solved my problem that no one could help with. Thank you

I have never ever heard of adjusting the table! thank you!

Great explanation!

thank YOU very much for this exzelent explenation !!! kinde regards from Switzerland !!!

I've seen a *lot* of videos on setting up a band saw, and not one of them has addressed this issue. A big kudos, sir, and well deserved.

Now I know why the blade walks the wood away from the fence on my band saw !!!!!!!!! Thank you!!

My jaw hit the floor when you said that if the blade is too far front/back that it will drift! Mine likes to slightly drift and it drives me NUTS!! I'm going to have to check my alignment. Totally worth it! Tahnks.

So excellent is your instruction-I salute you sir.

I thought my bandsaw was just garbage,but I will try this and see if this is the problem. I will be singing your praises if you have saved my saw and thus all the wood that meets the saw!

Brilliant explanation and thorough. Thanks When is your next lesson. Well done FWW. Keep it up