The reason I didn’t soak/boil the tenons or steam them is because that would have caused the wood to swell quite a bit and REALLY would have prevented me from assembling the mallet. Then if I trimmed down the tenons so they did fit major gaps would appear as the wood dried and shark. Plus major cracking and checking would likely occur in the end grain.

@MichaelSDoran

4 жыл бұрын

Will you sell the mallet?

@tykehotep2865

4 жыл бұрын

Daft question time what is the significance of third coast as it something to do with the great lakes

@LoudounDemocrat

4 жыл бұрын

Beautiful marking gauge. Where did you get that?

@tykehotep2865

4 жыл бұрын

Ooh and if you dont mind what make of watch is that as it looks great and I'm looking for a chronograph myself and cant afford a Daytona

@johnlemus7921

4 жыл бұрын

This was just absolutely superb. I love anything revolving Abraham Lincoln as I still consider him to be our greatest president. I didn't even know anything about his mallet. So this was totally new to me. I have one questions. Have you made anything using Japanese Style Twist Joinery?

Half the fun with a mallet is the head flying off .

@ragalyisp

4 жыл бұрын

😂 I had a 10lb sledge I couldn't keep the head from flying off lol.

@adamsmith2719

4 жыл бұрын

If not all the fun :-)

@tomschmidt381

4 жыл бұрын

We heat with cord wood so I always check the handle of my splitting maul. Pretty exciting when it flies off with it over your head.

@junkyyard2273

4 жыл бұрын

*Abe's head

@0623kaboom

4 жыл бұрын

isnt that sex ... when the head flies off ...

This is a valuable addition to my woodwork collection kzread.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

22 years as a Union Cabinetmaker in Chicago...I am humbled! You, friend, have extraordinary skill and patience!!! Well done!!!

@connorhart7597

Жыл бұрын

My jaw was dropped for most of the video hahahaha

Last week was horse shoeing, this week is woodworking. Quarantine is wild.

@Morty73

4 жыл бұрын

Same here, wonder what it will be next week.

@therealchris5894

4 жыл бұрын

Yep. 3 weeks ago I was all about computing and coding, then dirtbiking, now woodworking.

@WitTwixt

4 жыл бұрын

Have y'all seen Marble racing?

@Morty73

4 жыл бұрын

@@WitTwixt Go Hazers

@booty_hunter4207

4 жыл бұрын

Currently on mountain biking. Cant wait for the next one

Perhaps he used that when he was a vampire slayer.

@ThirdCoastCraftsman

4 жыл бұрын

Haha drove the wood stakes into the hearts with it

@stevemullins4335

4 жыл бұрын

Exactly

@alx252

4 жыл бұрын

Steve Mullins ... and imagine the upset face while he used a standard mallet and the head flew off... again... that's the reason for him to make this version of an mallet...

@robinsonkaspar3395

4 жыл бұрын

An astonishingly good book, with no reason to be good.

@social3ngin33rin

4 жыл бұрын

"thats it, i'm getting me mallet!" - Abraham Lincoln.

@shilopnamreg6468

4 жыл бұрын

“Let’s make everyone pay for universal healthcare and college and tell them it’s free, maybe some idiots will believe us!” - Bernie Sanders

@ppal64

4 жыл бұрын

Why? I need this mallet like a bullet in my head.

@scrubbob9901

4 жыл бұрын

Shilop Namreg yo don’t get suicided man

@DmdMixZ

4 жыл бұрын

@@shilopnamreg6468 It's actually crazy how people are so selfish that they don't realize how good it would be for american society to do it that way. I spent the last three days watching documentaries about the poverty in america and I was shocked to see that "the greatest country in the world" has people crying over someone scaling the tartar off of their teeth for free. And heck they even have been camping in a parking lot for two days just to make sure they'd be there early enough so the kids can go to the dentist too. Americans should be ashamed of their healthcare system. Sorry but it's true. Some of that shit is third world country condition.

@shilopnamreg6468

4 жыл бұрын

Un Beatable “free healthcare” would only put more Americans in poverty, since healthcare is so ridiculously expensive here. Forcing people to pay for it would put even more of us into poverty, and is also some commie bullshit. What about people who never go to college or rarely need healthcare? You’re forcing two huge taxes on them that don’t benefit them in anyway, and they don’t have a choice. At least now college and healthcare only hurt people who chose it themselves. The real solution is to lower costs somehow. I don’t know how it could happen but it would be far better than the communist solution.

You know you've watched too much forged in fire when you expect there to be tests at the end of the video for strength, durability, and effectiveness. Awesome Mallet though!

@williamhower3636

3 жыл бұрын

"IT WILL KEAL!"

@TheA.K.

3 жыл бұрын

No such thing as to much Forged in Fire!

@brosef4154

2 жыл бұрын

yeah, I want to know if this mallet will keal

@daveklein2826

Жыл бұрын

It's to be used with chisels

This is the type of video that makes me want to sell all my tools and get into stamp collecting.

@georgebowman3716

2 жыл бұрын

HA HA, well put!

@123AndJC

Жыл бұрын

Hahaha too funny

That, my friend shows you are a true craftsman! 40 years in the trade and I have never seen or even thought about pulling off a joint like that! I tip my hat to you Sir!

@marmitaa8619

11 ай бұрын

Because it is useless

It is just sickening how good some people are!

@johnathangrey3463

4 жыл бұрын

He gave me the flu. Now i want my own shop. Lol.

@billcoley8520

4 жыл бұрын

Look at his tool chest in the background. He had better be good

@dirk480

4 жыл бұрын

@VNMX50 What you suggest?

@Adventure_fuel

4 жыл бұрын

Haha. Thank goodness there I’ve got direction.

@dirk480

4 жыл бұрын

@@Adventure_fuel LOL

Nice to see someone who's actually keeping up the old-school wood craft skills and not relying on power tools to do everything for them... Huge props for that.

@shamanic1

3 жыл бұрын

Rob Cosman "I agree!" "That's me, too!"

@SwervingLemon

3 жыл бұрын

Power tools can make this easier to rough in, but without some kinda crazy 5-axis mill, I can't see doing the finish part of the joinery any other way than by hand... this is coming from a guy who has spent some serious time trying to figure out how to do exactly this to mass-produce a smaller version with a brass head. Possible, but the set-up costs make it so I'd have to sell a half-million of them to break even. :/

@TheE1401

3 жыл бұрын

Also, remember that Abraham Lincoln didn't have power tools then, so he'd have to make this all by hand

@MikeyDonna

4 ай бұрын

Here’s a challenge for you, make 2 more like this , one a 3rd smaller & one 2/3rds smaller !

There is nothing more satisfying than doing hand joinery.

Me: Doesn't watch woodworking videos KZread: M A L L E T

@glenfreyermuth2972

4 жыл бұрын

@LAFOLLETTER The point was not to make a practical modern mallet, but to meeting the challenge of making Lincoln'e Mallet.

@boseifrit5480

4 жыл бұрын

LMAOOO

@garychandler4296

3 жыл бұрын

I waw guessing someone would ask how much to make them one...$135 popped into my mind off the bat... ?...then I got that 5 hrs labor, plus, say $10 materials, plus $10 for resharpening tools. $135 ÷ 5hrs = $27/hr labor, highly skilled...NOPE! Not enough, because it's not on the "common skills" list. $45 × 5 maybe...so $225 + $20 above, for a $245.00 day. (I'm a contractor, so...)

@savage22bolt32

3 жыл бұрын

Making a mallet. Sounds simple. Just the beginner's project I was looking for.

Good on you for wearing a face shield while turning. Some guys are too proud to wear safety gear. Going without is how you end up with summer teeth, sum'er over here, sum'er over there!

@firebomb5510

4 жыл бұрын

Summer teeth😂😂😂😂😂😂😂😂,so true

@qwertyTRiG

4 жыл бұрын

A friend of mine does pewter casting. He recently posted to Facebook a photo of his face protection covered in pewter. I think some water got in and it exploded. Without the facemask, he'd probably have lost an eye.

@tylerjames1716

4 жыл бұрын

Safety nazi work snitch has entered the chat

@vVyohasakuraVv

4 жыл бұрын

woodturning is relativly harmless depending on the turning speed and condition of the wood anybody with even some experience would be able to judge using a mask or not. then again im not a safty geek i weld without safty stuff sometimes coz bacon

@gwallace5403

4 жыл бұрын

Safety is incredibly important. The emergency off switch for the vertical spindle sander wasn't accessible with your foot or knee, so when I lost control of my piece I tried to shut it off, and almost got my neck taken out by the work. I ended up catching it in my hands before it hurt anyone else (was all that went through my head at the time), and my hand was torn in half as a result. The piece blew apart and put a hole in a plywood cabinet door. It doesn't take long for something relatively harmless to turn incredibly dangerous at that RPM.

Nice to see a youtuber doing joinery by hand! So many rely on $10,000 machines to mill every piece just by twiddling the dials, hand joinery is a much more interesting skill to watch.

1.3K envious woodworkers... really cool stuff Third Coast Craftsman, really impressed! Thanks for sharing!

The Mighty Thor himself would be proud of this mallet ... and so would Groot 😁

"... my all-time favourite TV show, The Woodwright's Shop with Roy Underhill ..." -- aaaaand subscribed

4:50 that's an INCREDIBLE camera shot!

I like the way you kept the Hickory tenons proud of the head. The only thing that could possibly enhance that example of woodworker art is age! There's something about a fine old tool that only a craftsman can truly appreciate. You will either pass it down to family or it will find its way into the hands of a future Woodworker. You can bet that it will be a great find at an auction someday! *Sign Your Work!* Wakodahatchee Chris

I remember watching the Woodwright Shop as a kid. I actually made one of the impossible joints he showed on there in shop class in middle school.

@ThirdCoastCraftsman

4 жыл бұрын

He is the best! I watch his shows still on the PBS app on my TV

@andrewptrudeau

4 жыл бұрын

@@ThirdCoastCraftsman Love watching Roy, it looks almost like he's just kind of winging it when he works, but his final products are awesome.

Like squeezing a Turtle into his Shell !, once you get him in he ain’t coming out 👍🎩😎

@ThirdCoastCraftsman

4 жыл бұрын

Hahahaha exactly

@jasonpization

4 жыл бұрын

@Max Paine LMAO... true and figuratively accurate :)

Love your hound ! They make the BEST friends.

This is one of the most fascinating videos I've watched in a while. I respect your craftsmanship the finished product is amazing! Well done!

If Thor ever needed a wooden hammer.

@ProfessorKitchen

4 жыл бұрын

Exactly what I was thinking! The wooden Mjolnir!

@LatinDanceVideos

4 жыл бұрын

Good call

@voxelspec5647

4 жыл бұрын

Thor needs to take a business flight

@thatguy3718

4 жыл бұрын

@SittingMoose Shaman this needs more likes

@JasonAguirre

4 жыл бұрын

A metal hammer done this way would look amazing. Especially with two types of metal.

As much as I’ve enjoyed following the boat build, it’s nice to see some of this type project as well. Terrific craftsmanship!

@ThirdCoastCraftsman

4 жыл бұрын

thank you! I like to mix in some other stuff too!

Man alive, a simple dowel through the head and handle at the top will keep the head from coming off. Will I get a lot of glory from my friends telling me how cool my mallet looks? No, but then my friends don’t go through my shop so I have to keep showing my mallet to my bulldog and try to see if she is impressed. She seems more impressed when I show her a treat. You need to have a son or daughter who hopefully will be interested in wood working so they can continue to show your mallet off to folks and tell em, my dad made this mallet in 2021. Then you’ll be proud, but be careful as pride has its downfalls. Nice mallet.

The precision of cuts you make is just so admirable. Thank you for a wonderful video. Keep up the good work. 😊

All hand tools... Much respect. 👊

@ProjectDanH

4 жыл бұрын

@sl33p for the fitment of the head. 🤦‍♂️ Who cares about the handle.

@dennismayfield8846

4 жыл бұрын

Truly!!

The sound of speeded-up chiseling is so soothing.

@juniorsaenz9845

4 жыл бұрын

The human woodpecker

@Gamefreak8112

4 жыл бұрын

sped up

@jbrisby

4 жыл бұрын

@@Gamefreak8112 Maybe if you're from Mississippi.

@mitchgingrich2619

4 жыл бұрын

jbrisby I’ve been thinking of posting videos of carving just for people who want to relax. Would you put that on while you’re going to sleep?

@savage12k

4 жыл бұрын

Mitch Gingrich - ISPolitical hell no! I’d never get to sleep! Just watching this guy carve all damn night...

I really appreciated your shop supervisor. Kept an eye on you most of the time.

This is one of the rare projects I will never attempt. Beautiful work, outstanding result. Well done, sir.

This was randomly recommended. It was worth it

I watch the whole thing, I want to say “oh I see it all makes sense.” Nope still seems like an impossible joint lol. Good work!

@fivecitydirttracker4776

4 жыл бұрын

Freeking amazing.....is all I could muster.

@le_blake

4 жыл бұрын

Same !

@alyden567

4 жыл бұрын

Yea lol

@tigger6186

3 жыл бұрын

Think of those plastic buckles on a dog collar but with a wooden mallet.

@drevil2783

2 жыл бұрын

True. 😆😆 i still can't figure it out

Thank you, you did a fine job explaining the hows and whys. I do construction and cabinet making and your video opened a new world for me. Thank you again.

There's a man who loves his tools! And amazing skill, well done.

"If you're a touch too tight on your joinery, either your head will explode or the tenons will fly off". I hate it when that happens! Great Video- Thanks!

It was nice to hear Roy Underhill mentioned , I never missed his program. Beautiful work.

I really appreciate the segments of the video with just the sounds of the work being done. Great job

0.51 that walnut piece is a total dream. so many possibilities but so simple.

Hilariously enough, despite Abraham Lincoln having worked as a rail splitter, he despised physical labor . His father rented him out to neighbors for long hours and then took all his money (all the money one earned until age 18 went to one’s parents in those days) . It might be that this early experience eventually lead to Lincoln’s anti-slavery stance, and in turn, the emancipation of all the slaves . Bonus: Lincoln was quite the inventor . He designed a sort of airbag that prevented ships from sinking in shallow water, he is the only American President with a patent for his invention. Great work ! Beautiful mallet ! Thanks for the video !

@tylerbrown3135

4 жыл бұрын

Abraham lincoln did not really have a big problem with slavery. In many of his debates, he avoided saying negative things about slavery. Around the time the civil war started, he was much more concerned with keeping the states together than fighting slavery. He made the emancipation proclamation to help keep the states together because it only "freed" the slaves in confederate states that did not return to the union. Once the civil war ended, Lincoln had plans to ship former slaves to Africa, but he got shot of course.

@EUSA1776

4 жыл бұрын

Tyler Brown Lincoln’s views on slavery evolved over the course of the war, he saw the necessity of good soldiers in the war and the negro men who fought for the Union proved themselves to be formidable warriors. Lincoln initially said disparaging things about blacks during the campaign (particularly in southern or border states, he was a politician after all) but his view that slavery was an immoral and cruel system never changed. This modern view of Lincoln as just as racist as anyone else in that time is missing the point, he was a complex man, but a great man nonetheless. In his last speech he even spoke of negro suffrage and citizenship, the first president to even consider blacks as citizens. His views changed, the mark of a brilliant and admirable man .

@michaelmoody3737

4 жыл бұрын

@@EUSA1776 lincoln ruined America and opened the doors to communism.

@gasoliniroberto7528

4 жыл бұрын

@@michaelmoody3737 communism for the rich, but there's still capitalism for the poor! Paying 10,000 to corporations to have a baby is the ultimate form of neoliberalism - the exact opposite of communism. Just like your banks that take public money, your pharma companies that depend on public money, your captains of industry and presidents that depend on other peoples money. Theranos, Clinton, Bush, Obama, Trump Goldman Sachs are amongst the biggest takers of other peoples money in the world. America too. Your petrodollar system, for example, is the product of the largest crybaby bully in the playground. The way Americans cry if tax goes up by a cent, then cheer as the cost of housing goes up by dollars shows how well owned they are by neoliberalism.

@michaelmoody3737

4 жыл бұрын

@Santina Murphy you mean historical myths written by a tyrant and his minions.

That is fantastic. Even if it did not have “forever” assembly it is a beautiful mallet. Great job as always.

@ThirdCoastCraftsman

4 жыл бұрын

Thanks jay!

@melody3741

4 жыл бұрын

It does though it would be nearly impossible to take apart and if you wanted to be extra thorough you could cut slots in the faces and insert wedges to completely prevent it from coming out ever.

"Don't believe everything you see on the Internet." -Abraham Lincoln

@papabonito310

4 жыл бұрын

Hey guys it’s me peter griffin from the series “Family Guy”! I’m here to explain the joke! Abraham Lincoln wasn’t alive to see the internet, so he couldn’t have said that! Which means you shouldn’t believe that he said that, because it’s on the internet! Peter Griffin out!

@user-db8lj6wt7z

4 жыл бұрын

Hah, I get it

@Thunda1986

4 жыл бұрын

@@papabonito310 I don't think tis is the real Peter Griffin

@captaincornhole7317

4 жыл бұрын

I remember when he said that!

@austinpresley6187

4 жыл бұрын

@@papabonito310 Ray Comfort, is that you?

Nice to see an American using hand tools for a change. Clever piece of work. OK, so now take it apart...

Spends hours making mallet; can't hit anything with it because it's too freakin' gorgeous!

@MrToolmaker23

4 жыл бұрын

matonmacs But that's ok. It can and should be used. The whole point of making your own tools is so you can make them beautiful;. a family heirloom.

@custardavenger

4 жыл бұрын

Totally should be used. It's the perfect tool for someone who teaches others. An example of quality workmanship, eligant design with the mind bending curiosity that comes from trying to work out how it was made.

@MikeAG333

4 жыл бұрын

@@custardavenger Should be used? It's made of one of the softest woods there is. Use it for a day and you'd be throwing it in the bin.

@snipa298

4 жыл бұрын

@@MikeAG333 Is walnut and hickory really all that soft?

@MikeAG333

4 жыл бұрын

@@snipa298 Hickory isn't. That's perfect for a handle, and is commonly used for hammer handles (I've got one that has done 40 years service for me). Walnut is really really soft. You can mark it easily with your thumbnail. It is just about the last wood you would choose for a mallet head. Fine if it is just for show, like this mallet. It's beautiful wood for cutting neat joints in, and for a KZread clip it nicely shows up the quality of the joinery, so it serves its purpose well in this video. Just don't hit anything with it!!

I found myself holding my breath several times during the chiseling and the initial clamping. Thanks for showing us how the impossible is sometimes possible.

4:51 omg, that breathing. My heart almost stopped because of the tension :D

Awesome job, what an incredible build honoring an incredible President.

This is a mind blowing design for a mallet

The sped up handtooling was so satisfying to the eye and ear.

Amazing job - there are some real incredible masters of woodwork in the world! Thanks for sharing this!

My Dad passed away about 4 years ago now but we watched the Woodwrights Shop religiously together and this was well before the internet when we had to wait to catch it weekly on OPB. Amazing show and incredible work on the mallet. Its beautiful.

A mallet Thor would be proud of 🔨

@obeycastle2547

4 жыл бұрын

And groot

@o.g.bwoodwork

4 жыл бұрын

Ram Wrath how could I forget groot!

Brother, that is the coolest mallet I’ve ever seen. Amazing work. You’re the best

@ThirdCoastCraftsman

4 жыл бұрын

Thanks so much man. Its definitely pretty cool!

Talk about craftsmanship!! I don't know where you find the courage to embark on a build where every step is a hair away from ruining the hole thing! I held my breath while you were turning the handle... Again, congrats on a wonderful piece!!

That is just crazy intricate... im blown away at how beautiful that thing is... awesome job

Been waiting for this ever since u teased it on Instagram

@ThirdCoastCraftsman

4 жыл бұрын

haha sorry for the wait and hope it lived up

@isaacjoseph2861

4 жыл бұрын

Same here!

THIS type of content! Nice build! Love to see the non-Lowe's sponsored real woodworking stuff.

@ThirdCoastCraftsman

4 жыл бұрын

I love doing this way more too!

@sirmixalot3332

4 жыл бұрын

Are you referring to bLOWES hardware?

Just when i start thinking im a pretty good carpenter...............you start showing off!

Aside from the remarkable woodworking, your video production is finely crafted! You narrate in post-production (professional touch), and say just what needs to be said, without side-tracks, into your personal life, or diatribes, regarding tools, or whatever. Quick aside: we do not need any more members, of the curmudgeon-woodworkers-with-a-channel-tribe. Quota filled, thank you! ;-) Your editing, causes the boring parts to disappear, or go into hyper-drive, while the satisfying parts are shot, in closeup. And thanks, for keeping the - appropriate - music, dialed UNDER the sound of the hand tools! For the life of me, I cannot understand, why so many Producers, of craft content, insist upon take-no-prisoners death-metal, at 101 decibels! Cheers!

Wood carving looks so satisfying

@Gartral

4 жыл бұрын

it's both incredibly satisfying and totally heart wrenching... satisfying when you make something awesome like this hammer, heart wrenching when you get 50+hours into a piece and realize something screwed/is going to screw up. SOMETIMES you can adjust and fix the issue, but far more often you have scrap anywhere from 20 minutes (annoying) to a few days' (devastating, but not the end of the world ) work to correct the mistake. Patience, a keen eye for detail, and understand your materials and tools mitigate a lot of it, but things still go south.

This brings back memories of my dad ( RIP dad ) he was a gunsmith. He did all of his carving with hand tools. Including metal filing on the actions etc. Burl to Birds Eye maple, hands of steel making shavings thinner than onion skin. I learned life lessons just watching him for hours. Respect your work piece, do not rush, when you do anything- do it right, and do it right the first time. Thanks.

That sure was fun to watch!

You’re so young and I don’t mean that in a negative way at all but in a way in which it means there’s potentially decades to hone and perfect this craft. All the woodworkers I’ve known are older in age and started it late in their lives or really started focusing on it once they were retired. Really hope this continues for years to come. Love it.

"The Biggest Challenge of This Project".... is Freaking Everything 😎

Reminds me of the guy that used to be on PBS that only used hand tools.

@SamuraiWreck

4 жыл бұрын

The Woodwrights Shop with Roy Underhill I watch him every weekend

@hp5469

4 жыл бұрын

@@SamuraiWreck well apparently thats where he got the idea for this mallet , lol. What a coincidence.

@Bluelightbandit

4 жыл бұрын

Mr. Rogers? 🤪jk

@judsonkr

4 жыл бұрын

Oh, you mean the guy he mentioned 40 times or so during the video? That guy?

@hp5469

4 жыл бұрын

@@judsonkr lol yeah that guy. Obviously if i knew they were the same guy i wouldn't have made the comment. And if you would have read my reply to Lawrence lake ( who had all ready informed me that they were the same person ) you wouldn't have made your comment. Unless you are of course a douchey a-hole. So which one is it ?

Thank you brother. 13 months ago I became inspired to do attempt woodworking. I built a workbench from 2x4s using only a claw hammer, a rusty handsaw, and a set of Stanley chisels i got from Lowes. All the joints were halflap and only a couple were loose. This was due to the hook on the tape measure being bent, creating an extra 1/8 and me not realizing it until too late. Shortly after I started purchasing power tools and such and stopped using hand tools. I recently bought a set of Narex chisels in the hope of rekindling that desire. Well, you sir, have done just that. For that I thank you sincerely.

Very nice! You are now the God of Thunder!

Must have been a little cold in the shop that day as Utz looks pretty comfortable by the heater😁❤️🐕

I love the sight and sound of sped up chiseling.

@entheogenocide

4 жыл бұрын

I think it would make a great asmr video

Subscribed just because you mention Roy Underhill. Any Woodwright's Shop fan has got to produce good content.

Love the art work and the fantastic tools, thank you for sharing this with everyone.

Really good job, I love the look of the walnut after it has been oiled

Always admired the use of hand tools. I don't have the patience to do everything by hand though. I will break out the hand saw every now and again.

A good how to vid! Thanks! You have made a tool for generations to come, cherish it n keep it safe!👍😎🔨!

Beautiful craftsmanship! Roy Underhill would surely be proud to have inspired this.

Who in there right mind would give this a thumbs down. Well maybe someone who lost their thumb trying to make this mallet.

@alphazuluz

4 жыл бұрын

People hit it by accident. I am convinced of this. I’ve seen too many awesome videos with hundreds of dislikes. There are not that many shitheads in the world.

@shaneknerr4014

4 жыл бұрын

@@alphazuluz I agree that could happen. But by the looks of your name you don't live in the U.S.A. so I'm going to have to disagree with you on the not to many SHIT HEADS PART. I think lately as a country we have that covered. LOL.

@thedanyesful

4 жыл бұрын

Yeah it's bizarre. Six-hundred thumbs down for such a pleasant and uncontroversial video. Who are those people?

Wow that is the most beautiful piece I’ve ever seen. Thank you!

That was great! I do love seeing a master craftsman at work.

Never would have thought I'd like wood porno.

@dhymekeith1285

4 жыл бұрын

😆

@OnlyOnMondays77

4 жыл бұрын

Who wood of thought

@genelomas332

4 жыл бұрын

For hard core wood porn, check out The Samurai Carpenter, or Young Je.. Both make incredibly beautiful pieces..

@jdhed1

4 жыл бұрын

Complete with phrases like "head explodes"

@phil8656

4 жыл бұрын

Why do you think they call it "wood"?

Sooo impressive.. That's a tough one. Loved it

@ThirdCoastCraftsman

4 жыл бұрын

Thank you!

Jeez this guy's got skill and a LOT of patience!!

Nice job. Great to see a craftsman at work with hand tools. Love it

The mallet head spinning around when it was on the lathe looked like it would have completely demolished a finger/hand if you slipped into it's path of rotation.

@EwePeople

4 жыл бұрын

Why u scerd?

@benbrice9343

4 жыл бұрын

@@EwePeople You got that right ! Nah man I wouldn't be scared but I would be extra cautious. I would hate to only have one functioning hand for the rest of my life.

@sethj6483

4 жыл бұрын

It probably has security mechanism like at the part where he held the handle and it stopped. So if you did accidentally put your hand on the mallet it would stop automatically

@Euphroe

4 жыл бұрын

@@sethj6483 NOPE!

@xXCursedWorgenXx

4 жыл бұрын

@@sethj6483 it stopped because he turned it off.

Wow, just wow. I'm struggling to find the words. I will say it's nice to see something new as far the design goes. Very well done 👍👏👏

@maxlee6676

4 жыл бұрын

new as abe lincoln! lol

@LTDWoodworks

4 жыл бұрын

@@maxlee6676 Well when you put it that way... ya, it's not new😉 It's new that "I" haven't seen it before 👍

@ThirdCoastCraftsman

4 жыл бұрын

Thanks so much man. I really appreciate that!

I love how you doing that using traditional instrument that makes that more masterpiece👍👍

Loved your mallet ! I’ve wanted to tackle one myself after viewing Roy’s as well, now after seeing you have done one yourself I’m ready to head down to my shop and get to work 👍 Thanks for the added inspiration and all of your great videos !

Oh that high speed chipping is so satisfying ...

@TurnipCart

4 жыл бұрын

Ikr

As Mark Novak from C&Rsenal would say "a ridiculously sharp chisel makes it a lot easier"

One of the best joiners by far, truly an artist

What a work of art! Thanks for sharing!!!

For some reason makes me want a mallet, and, actually makes me want to rethink my life choices.

Abe designed that mallet during his years as vampire hunter.

I loved watching the Woodwright show when I was little! Great job on this mallet-so cool!

What a masterpiece. I love it.

Legends says, his mallet and stake is still slaying vampire til this day

@irisrodriguez7659

4 жыл бұрын

These woodworking plans are absolutely comprehensive, *www.WoodPlanner. xyz* .

I can't even make a PB&J sammich this perfectly!

Incredible craftsmanship. Thank you for sharing your work 👌🏽

Your attention to detail is stunning