I totally disagree about the mid mount mower deck. I use mine every week to cut my two properties. I take it off late fall every year. The diesel engines run forever if you take care of them so I don’t worry about hours on it heck I bought it to use ! You can always invest in a rear mount finish mower if you hate the mid mount that much? Lol 😂 Heck that Kubota diesel will outlast you! Lol 😂

@turbotona25

11 ай бұрын

I agree I love my mid mount mower. It cuts great is super smooth and I can cut forever on a tank of diesel.

@roadglide1142

11 ай бұрын

@@turbotona25 So true one of my properties is 2.5 acres & the fuel guage hardly moves after I finish cutting it !

@ritterjon

11 ай бұрын

Diesel has the power and durability to last a long time and barely uses any fuel. However it’s. However my zero turn is twice as fast, more comfortable and does require me to mess with attachments. Thanks for your comment. Keep on tractoring!

I agree with you 100%. I purchased my BX23s last year in BC Canada. The dealer couldn't believe I didn't want a mower that was on sale at$300 off. It was still a $3,000 attachment. So, instead, this summer, I got a Kubota Z412 zero turn mower. Without a doubt, it was the best decision I ever made. The new seat is absolutely amazing. You can spend hours on it in perfect comfort.

@ritterjon

11 ай бұрын

I don’t understand their seat debacle. Why can’t the Bx have a nice nice. It just doesn’t make sense. Smart move not getting a mid mount. Keep on tractoring!

@michaelmactavish4445

11 ай бұрын

@@ritterjon lucky theres air ride seat avaliable for bxs

When I bought my BX23S I did it 95% because I watched your videos. At that time you had and you used your mid mount mower. I had a riding lawnmower but I didn't have room for both the BX and riding mower. So I bought the bx with mid mount mower and I got the 3 point bagger (I'm not mad, you have a right to change your mind). The delay due to covid was horrid and 1.5 years after ordering it all, I got the mower and bagger. Then I was busy and didn't try it out for several months. I finally got time and hooked up the MMM and it was the biggest headache I have ever had. Most 3 point attachments are no fun, but the MMM was horrible. Over time I realized that lifting up the front tires helped a lot. So I leave the FEL on and lift up the front tires and slide it under and now it's manageable. The grass catcher/bagger is another pain point. I have put the mower deck on and off several times, but I have only put the bagger on once and taken it off once, but I want the clippings off the ground and it does the job pretty well. I also decided to buy another 3 point hitch so I could leave it "set" in the right position for the bagger. I bought the Pats quick attach for the 3 point and I like them, but the bagger will not work with them on, so essentially I had to buy another 3 point system and I now understand why you have to hook the bagger onto some stationary mounts (part of the installation process), and it's because the 3point rear linkage goes up and down with the mower and you can't stop the rear 3 point from moving. So it has to be forced into staying put or the pto shaft will not work. I agree it's one of the biggest pains for owning a BX but only having used it this one season (several times) I think I'll keep using it and curse it each time I have to (because it was A LOT of money). 😂

Way to go! Kept me hooked for the entire video.

Having had four Kubota’s I believe you are correct. Kubota has thinned out the steel body, the wheels are terrible whether all plastic or steel and rubber, it’s difficult to grease and way way way to hard to get on and off. Someday I’ll tell about my 50-30 amp fuse box problem!!! I’ve been on it over a month!!’

I totally disagree. I had a riding mower, and it took 3 hrs to mow my lawn. Purchased a subcompact tractor and cut my mowing time in half. Plus, I can grade my driveway and do so much with my tractor, It's a multi tool. I love it.

@ritterjon

11 ай бұрын

I’m very happy that you’re enjoying your mid mount deck. However, you’d cut your mowing time in half again if you had a zero turn. I can’t believe how much faster they are. Keep on tractoring!

I don’t have one but I agree! Unless that’s the only thing you plan to use your tractor for.

@ritterjon

11 ай бұрын

Thanks for watching Ed! It’s nice to have a separate unit for mowing. Keep on tractoring!

I totally agree with you Jon! I have a 2020 BX 23s that I purchased used a couple months ago. I live on a half acre in a subdivision and I purchased a used ZTR to mow. I use the BX for tractor work only. It’s the perfect combination! My BX has the quick connect coupler and I haven’t noticed any oil leaks yet.

@ritterjon

11 ай бұрын

Thanks for watching and I hope the days of quick coupler oil leaks are over! Keep on tractoring!

Dang, I just signed for a new BX23S Friday. Bought it with the intention of cutting grass plus farm work. You may have changed my mind about dumping our riding mowers. I will probably keep one at least and like you said use the tractor for the farm work like it was built for. Great video, really appreciate your time and honesty.

@ritterjon

11 ай бұрын

Hold on to those riding mowers. You might find that they are a better option. Your BX will be able to handle all sorts of stuff but it’s a cut above cutting grass. Keep on tractoring!

Great video, John!👍🏻

@ritterjon

11 ай бұрын

Thank you! Keep on tractoring!

Thanks for the advice I was thinking about a mid mount mower for my Massey Ferguson 1723 E tractor but I use the backhoe and bucket more than I would for mowing. We have a 54” Cub Cadet for mowing a lot easier to mow in tight places.

@ritterjon

11 ай бұрын

Yeah don’t get the mid mount mower. It’s really not worth it. I think you’d be impressed with a. Zero turn if you ever wanted to replace that cub cadet. They are extremely maneuverable. Keep on tractoring!

100 % agree. Thumbs up! 👍👍👍👍

I've saying that for years. There's no way I would put that many repetitive hours on my tractor, not to mention the upkeep, installation and removal. Zero turns aren't that much more than the mower deck, are faster, and do as good or better job. You nailed it. 3PH post hole diggers suck too.

I agree with you. When I bought my BX2380, I used the mower alot. I then got tired of getting cold in the winter moving snow so I installed a cab on my BX. I then had trouble mowing close to trees, so I took the deck off and bought a zero turn. Thank you for your video. I also have less trimming to do with the zero turn.

@ritterjon

11 ай бұрын

It amazing how maneuverable those zero turns are! Keep on tractoring!

Outstanding, John! I totally agree. When I switched to a ZT, I reduced my grass cutting time by over 50%.

@ritterjon

11 ай бұрын

I was pleasantly surprised how fast I could actually mow with my zero turn compared with my BX. Night and day difference. Thanks for watching. Keep on tractoring!

I agree completely. I'm tired of installing and removing the deck every time I have a project. And it is not a good idea to drive a heavy tractor over my septic system and drywells. I am ready to go back to a garden tractor. I can get into more places with the garden tractor too.

Jon,excellent video mid mount mower to many things can go wrong with them ❤😊😮

@ritterjon

11 ай бұрын

That is true! Thanks for watching! 👍 Keep on tractoring!

I know the MMM is the right choice for some, but I tend to agree with your assessment Jon. Not so worried about hours on the tractor, but having to constantly take it on and off, and versus the efficiency of a ZTR (even with a slightly smaller deck), the mid-mount was a hard pass for me on the LX.

@ritterjon

11 ай бұрын

Glad you agree and didn’t spend money on a mid mount. It’s really hard to beat the benefits a zero turn has. Hope all is well buddy! Keep on tractoring!

Just curious, what was your wheelbase before you put the spacers. I just bought a brand new BX 2680 and I’m not sure if they’ve corrected the problem yet or not. Thanks Fred

I use my mower deck the most on my BX the most. The other attachments I have are used sometimes and I consider them as extras.

I had them fix my quick connect for the hydraulics and it worked great for about a year and then it started to leak again. I checked the connections and made sure it was all tight. Since then the leaks have stopped. I’m guessing because of use and vibration the fittings must slightly loosen over time.

We opted to not get the MMM. We have a (currently not working) Husqvarna riding mower, but with no rain in our part of Arizona there’s no grass to cut this year.

Great video Jon I totally agree with you on the mower deck,for the price of the deck you could get a really good riding mower keep on tractoring.😊

@ritterjon

11 ай бұрын

Absolutely! Mid mounts are priced too high for what they are. Keep on tractoring!

I appreciate your perspective. I was planning to get a MMM for my B2601 but reconsidering that now. My riding mower has 1700hrs. Maybe I don't to start racking up the hours on the Kubota.

@ritterjon

10 ай бұрын

If you don’t need to mow with a BX, just don’t. There are better things to spend hours on doing tractor things. Keep on tractoring!

I agree with you 100%. The mid-mount mower deck for my last BX got used exactly one time (just to confirm it worked okay when new). The remainder of the time I owned it was spent on a skid taking up space in my barn. I mow a bit over 4 acres, about a third hills, with a "green" 60" zero turn. Takes well less than half the time compared to the BX2680. When I traded for my LX, I did not waste money on another mid-mount mower. It was priced nearly the same as a mid-size zero turn. I found a used finish mower instead for a backup to my zero turn. Another interesting video. Thanks and keep having fun with your tractors.

@ritterjon

11 ай бұрын

Glad you agree, yep the mid mount just isn’t worth the hassle. Thanks for the comment! Keep on tractoring!

In my opinion, all attachments you showed are great ! It all boils down to what a person needs or in some cases just wants. In my case where I mow the zero turn just isn’t safe or appropriate. I needed 4 wheel drive for some areas. My main use is mowing and rear attachments like a box blade or regular blade and any rear PTO equipment if I desired. I agree the deck isn’t easy to remove and reinstall but it is a quality deck unlike the box store mowers. In closing, it’s just whatever a person needs for the job or they just want to have it. Have a Blessed Day 🇺🇸TCB⚡️

Amen Brother 👍🏆🏆 Mowing deck out the door a waste 😳

We bought a Kubota diesel turn this spring and love it, but for large acreage mowing, nothing beats a finish mower IMO. Tractor Hard, Jon! 🚜💪!

@ritterjon

11 ай бұрын

A rear mounted finish mower is much better than a mid mount. I bet you’re loving that zero turn. Hope all is well Brad! Keep on tractoring!

I agree on the mid mount mower. I to mow with it, but it is a pain in the back side to put on & off! I went with a 6' 3 pt behind My tc 33D compact. A cheap low hour sub compact with a mid mower. I use My mowing time as a stress reliever! Keep on tractoring.

@ritterjon

11 ай бұрын

A 3 point mower is much better than a mid mount and the fact you have a six footer is a time saver. Keep on tractoring!

I already ordered my Kubota LX2610 with a mower deck a month ago. I already have a craftsman tractor though. lol

I understand where your comming from BUT I bought my bx23s specifically for mowing the yard. It was the best option for deck size 4wd and a decent ground clearance I mow 5 acres twice a week the yard has very steep terrain and wet spots so the fit works

Some like Bud, some like Miller. I disagree with a new ZT vs a new Mower deck. I agree with a good deal on a used hydro riding mower vs a new mower deck. The ZT also requires storage, maintenance and messing with belts. One the loader, why buy a 1/2 pickup when you need a 1 ton? For my 2 acres in north Florida, I wanted a small multi-tool, i.e. a riding mower that can be a miniature mule when required. BX1880 is it. Mows great, moves yards of dirt, pushes big stumps, moves chopped down trees. I did get a free hydro riding mower I use for rough mowing, and a steep ditch. I enjoyed your review of the other implements. 👍

The mid mount mower deck for the BX as you said, it a PITA to take on and off. However, we just learned a way to take the mount mower on and off that is easy. We do have a John Deere Z turn that we have owned since 2010. That Z turn has mowed a lot of the property around us. However we purchased it used, and have beat the machine up quite a bit. Right now the Z turn needs major work, and we are putting the mid mount back on the BX. We are holding out for an electric Z turn as that is the future and we are 75% electric in our home, one car with the tractor etc the only machine that is a combustion engine. We also have an eye out fr when Kubota or John Deere sells an electric tractor and will invest in that. But for now will fix the turn and use both the BX and B2650 to mow. Love your videos.

@ritterjon

11 ай бұрын

I appreciate you watching and leaving a comment. There are some pretty decent electric zero turns already but I think you’ll see even more option next spring. I also have a feeling Kubota will launch its electric tractor next year also. Keep on tractoring!

I’m in Nova Scotia. I purchased the mid mount mower last fall with my BX but ask to pick it up this spring as I was in a new build and wouldn’t have my lawn installed until then Then when this summer came, the money I spent on the MMM I told the dealer to keep it and the mower, and I’m paying the difference on a a z232 zero turn. I also have the Curtis cab and think it would be too too heavy on the slopes of my lawn and the other reasons you’ve mentioned. Totally agree on skipping the MMM

@ritterjon

11 ай бұрын

Sounds like we’re very similar! Glad you got the zero turn! I bet you love it. Keep on tractoring!

Jon great attachment video, I’ve got one coming up soon as well. I agree 100% about your logic on the mid-mount finish mower. Why put hours on your tractor for mowing grass, as you pointed out there are better options out there. Stay safe👍TCT

@ritterjon

11 ай бұрын

Thanks for watching Tony! I’m looking forward to seeing your next video. Keep on tractoring!

I’m in the totally agreement with ya Jon on the mower ! I am glad I have my 3 point finish mower but my Zero turn is so much faster and cuts just as well I use my finish mower more like a rotary bush hog now What a waste of $$$$ Great video thanks for sharing 👍

@ritterjon

11 ай бұрын

Yep you’ve also learned the grass is greener on a zero turn. A rear finish mower is a lot better than a mid mount no doubt about it. Keep on tractoring!

You are right Jon, for me, I almost got the mower deck with my BX, I figured the numbers out, and at the last minute I swapped it for the front mount snow blower and kept my Craftsman lawn tractor thinking I would sell it an get the BX mower deck the following summer... Ultimately I still have the Craftsman lawn tractor and glad I kept it, no swapping implements and less of a pain in the butt... Although I do like the BX mower deck.

@ritterjon

11 ай бұрын

The BX mower deck is well built but still a pain to deal with. Sounds like you made a good decision! Keep on tractoring!

Outstanding Review Sir and very well said 😇😇👍👍Cheers 🍻🍻

@ritterjon

11 ай бұрын

Thanks Dave! Seems like there are a lot of people agree with my opinion. Hope all is well buddy. Keep on tractoring!

I 1000 percent agree. Plus my compact tractor 3 point and deck go down at the same time so if you go to the woods with rear attachments your lowering deck as well and catches on everything.

@ritterjon

11 ай бұрын

If you lock it into its highest cut setting it won’t go up and down. But it’s is still a pain to take off and put back on. Keep on tractoring!

@jeffschaefer4579

11 ай бұрын

That's true, but the overall ground clearance is so susceptible to catching on everything. @@ritterjon

honestly I think you are right. if I could find the right mower at the right price I'd stop using my tractor to mow my grass. in fact I'm actually looking at a regular riding mower for that purpose. love to have a zero turn but just cant justify the cost. enjoyed the video!

Agree. Based on KZread searches and friends I got a zero turn instead of the belly mower. They were close to the same price. I’ve got a flat area with lots of trees and I works great. My brother in law got a zero turn but his lawn has hills…no good…he had to get a regular lawn tractor.

@ritterjon

11 ай бұрын

That is the biggest downfall of zero turns. They aren’t the best on hills. Thanks for the comment. Keep on tractoring!

I have a bx25. I agree that the mmm is a pain to put on and take off. However, for me, it’s a Godsend. I mow about 4 acres weekly and most of it is on a 25°-30° slope. A zero turn won’t hang on the side of the hills. I’ve tried green ones, orange ones and yellow ones without success. A standard box store riding mower lasts about two years and they’re shot. It’s too steep for the oil pump to keep up. If I had a flat yard, there’s no way I’d mow with anything but a zero turn! Love the channel. Keep tractoring!

@ritterjon

11 ай бұрын

Sounds like some seriously steep slopes you have. You should consider a Ventrac. Those things are made for slopes and are quite comfortable to operate. Keep on tractoring!

I agree. I have an almost new 60" Kubota Belly Mower I took off of my B2650. I like our zero turn better and will be selling the belly mower.

AGREE. I wouldn’t have Until I also got a deal (neighbor moved and basically gave it to me) on a JD zero turn and now I would never go back to using a tractor. I no longer even think of putting on my 60 inch belly mower on, let the tractors do their things and mow with a mower😊

I don't have a Kubota but I have a New Holland and I love my Mid Mount Mower. Yes, it is marginally slower in my yard than a zero turn but having the torque of a 29hp diesel mower is amazing compared to a cheap 22hp gas zero turn. And I can mow my lawn for 1/3 the fuel cost. It is a little bit of a pain to remove but for most of the summer I just leave it on and pin it up.

I totally agree! I have a ZeroTurn that cost the same as the MMM and all the points you raise are valid.

@ritterjon

11 ай бұрын

It’s hard to beat a zero turn! They turn mowing from a chore to a fun experience! Kinda like the tilt-a-whirl of Ken care machines. Keep on tractoring!

Disagree I would kill a zero turn in 3 week old grass thus own the B. Biggest waste/worse attachment for me would be front mount snow blower Northern Michigan I use just over 1 tank of gas a season in my walk behind blower. I still own my old 50" cub cadet for mowing side ditches. 2019 deal I was under MSRP the deck was free.

Everyone’s situation is different. I have back issues and was mowing about 1 acre of uneven and rough lawn. Needless to say I dreaded mowing the lawn. I was looking at the Toro zero turn with the myride suspension. $7000 Canadian and the salesman telling me it should last 10 years, I decided to go with a new BX2380 with a 54” mid mount mower and front loader. With the high back reclining seat, tilt steering, large turf tires and reduced mowing time makes mowing my lawn enjoyable. Its not as fast or smooth as a zero turn, however, I am now able to level my lawn with topsoil using the bucket as well as numerous chores around my property and for plowing my 130’ driveway in the winter. I’ll see how I do moving snow this Winter with the loader and bucket but will eventually invest in a snowblower . I enjoy watching your channel. 😀

@ritterjon

11 ай бұрын

For that long of a driveway I’d suggest a front or possibly a rear angle blade. You’re right, everyone’s situation is different and I’m happy you’re doing well with your machine. They can be a lot fun and save a lot back breaking work. Thanks for the comment. Keep on tractoring!

@454ss70

11 ай бұрын

Thanks for replying. They sure are a lot of fun😀

I certainly agree with you. In my own situation, I use a flail mower on my tractor for almost my entire lawn and I like it way better than my belly mower. My belly mower based on the instructions is suppose to take around 5 mins to install. YA RIGHT!!!! I can put the flail mower on in 5 minutes with obsoletely no issues. Sure going around beds and stuff can be an issue and that's why I always have a lawn mower and a good Weed cutter around for those jobs. My flail also adds a bit a weight to my tractor when I'm using the loader. Hey, I used a belly mower for 15 years. Like you said in the video, it works and it works well but It's a complete pain to put on even when your use to it and its a pain to store not to mention the upkeep required to keep it running well. I have a huge lawn area to cut on our homestead with a surrounding forest that keeps wanting to take over my lawn. I understand that those with smaller lawn areas may find a flail mower just a tad to big and may settle for something a little more adequate for their own circumstances and that's where I totally agree with you that there are much better solutions than a belly mower. In the end. it all depends on your applications and the best solution for your sub compact tractor. Great video and lots of fun. Keep them coming!

@ritterjon

11 ай бұрын

Thanks for the great comment. I appreciate you watching! Keep on tractoring!

I’ll have to disagree on the worst attachment. But I purchased my BX primarily for mowing. Nothing else was holding up to the hills (transaxle failures)and a zero turn is dangerous in the places we have to mow. Because you can’t steer them out of a skidding situation. I do get your point though. I gave 230 hours on my BX and 200 of them is probably from mowing. Take care!

I am in the process of buying a tym here in Ontario. I am leading towards a fail mower instead of the mid mont mower deck even though tym is a drive over deck, just the Fail Moweris all-round unit, and with a really bad back I am not a fan of rolling around to hook up the deck 😅

@ritterjon

11 ай бұрын

Be aware that even the drive overs aren’t that easy to hook up. I’m not sure about the TYM mower so be sure you understand it well before you buy. Good luck and thanks for the comment. Keep on tractoring!

My tractor doesn’t have a mid mount option. I have a 6th brush hog and a 6ft finish mower. I use them the absolute most. My least favorite attachment is the landscape rake. It would be different if we had a riding arena to maintain (that’s future plans) but it has been useless for our rural property.

I agree with you it's in way all the time and I can mow my yard much faster and easier with my zero-turn get closer to the trees and under them it's designed to mow it has a 60 inch deck when necessary I use the bush cutter

How's she goin'? Interesting video Jon and I have to agree a mid mount mower is not a good attachment for a machine like a sub-compact tractor. Take care!!

@ritterjon

11 ай бұрын

Thanks for watching Mike. Glad you agree. Keep on tractoring!

Agree BUT with a steep yard a 2wd riding mower will not work. The BX2350 manages the grade just fine and without tearing up the lawn. Since its under .75acre it can be mowed in about an hour. The mid mount mower is a HST fan guard so its seldom removed, for running through the woods.

@ritterjon

11 ай бұрын

For a small yard at least it shouldn’t put too many hours on it. I agree it does protect the fan well also. Have you heard of a Ventrac? They are the best at steep grades. Keep on tractoring!

@Rick-se5qm

11 ай бұрын

Purchased new in 2009 it has about 1000 hrs. on the clock. For mowing, towing and skidding logs its a versatile machine for my needs.

I also have a mower deck,not being used in the shed .not a bx though. B 2330

With regard to tire size and lift capacity. They are the correct size for the tractor, and lift capacity wise , it is a subcompact tractor.

I wanted to add that if someone made a 3 point finish mower with grass catcher/bagger I would love that instead of the MMM

if the BX is limited without the loader having a wimpy loader doesn't exactly fix that problem would your opinion of the MMM change at all if it was super easy to take off and put on?

@ritterjon

11 ай бұрын

The loader lift capacity can be altered, but its factory settings are embarrassingly dismal. If the MMM was easier to put on and take off I’d still have the same opinion. The added hours on a tractor to do what a lawnmower should be doing isn’t necessary in my opinion. Keep on tractoring!

@donalexander4083

11 ай бұрын

@@ritterjon valid points on all counts as you pointed out which attachments are worthwhile or not varies widely by individual.

I actually use my 60" belly deck in the spring for brush cutting. Those blades are very thick and a very stout deck.

@ritterjon

11 ай бұрын

Very strong mower! It will cut some heavy stuff. Just watch your temp gauge. Keep on tractoring!

Get a Massey Ferguson GC series tractor. The mid mount mower is an easy 3 minute job to remove or put back on. It does a great job also. Had mine for 5 years, mow about 2.5 acres. Remove it nearly every time I mow.

I love my mower deck, I have the easy over deck against the salesman’s advice and I can’t imagine having the regular deck, my neighbor almost never takes his deck off cause of the hassle but with my easy over deck it takes two minutes.

Completely agree about the mower deck. Slow, expensive and awkward to cut grass a tractor is. Everything you said is 100% valid, a tractor is not a mower, the same way you wouldnt plow the driveway with a zero turn, or till the garden. People who buy tractors to cut grass have more money than brains i believe, and if theyre happy doing that, more power to them. I just found your channel and subscribed, i enjoy the content, Chris from Canada 🇨🇦

@ritterjon

10 ай бұрын

Hi Chris! Glad to have a new subscriber! I’ve got a lot of great Canadian viewers and always happy to add another one. I appreciate you watching! Keep on tractoring!

I agree. But maybe if I had a longer left arm with a little more muscle. I wouldn't be struggling for that CLICK sound, when on. ( Thats my only hang up ) I kept my old Yanmar but the blades for the YCM 48 are Unobtanium Kubota is usually there for parts. Kubota for the win.

I have a B, not a BX, and in hindsight the belly mower was indeed not a good choice. It's been sitting on the barn floor on its furniture leg dollies for a couple of years now, while I use my somewhat undersized zero-turn to do the mowing. The main reason for this is that I tend to be using 3-point attachments a lot, and they don't play nice with the mower deck, so I'd be constantly taking it off and putting it back on (and doing the reverse with the tiller or box blade), which is a pain. Shoulda skipped it and gone for either a brush hog or a flail mower (plus a bigger & better zero-turn for the lawn areas).

@ritterjon

11 ай бұрын

Glad you agree! Maybe list that mid mount for sale and look into getting yourself a better zero turn. I’m sure you could get almost new money for the mower deck. Keep on tractoring!

That’s interesting I wanted a bx so I could mow and plow snow with one machine

I agree that in yours and many others use case, the MMM is a waste of money. Then irony is I bought my 2380 specifically and primarily to mow after my JD ZT blew the engine. I wanted a reliable diesel mower that could do light dirt work and that would replace my snowblower. A 2380 with the mmm and loader checked all the boxes like no other machine did. My only regret was not ponying up the (Frankly insane) $6500 for the heated and cooled cab. Other than that, I'll probably be putting a flail mower on it next season and seeing how I like the cut vs the MMM. I have a ton of sticks and branches fall every year and I'd just as soon mulch them with a flail vs dinging up my MMM. Who knows, maybe next year I'll be agreeing with your Worst Attachement choice but for a totally different reason lol Happy Tractoring!

My lawn has 30 degree inclines, the mmm combined with 4wd is essential.

@ritterjon

11 ай бұрын

Yep, I can understand that a zero turn wouldn’t work that well for you on such an incline. Keep on tractoring!

Grea🎉

I hear what you are saying about the mid mount mower deck but I don't totally agree. I have a John Deer 2038r with a 72" auto connect mower deck. I rather mow with my tractor than my Bad Boy 60 " 0 turn. It only takes me 5 minutes to install or remove my mid mount mower deck. Same thing with my loader, Only 5 minutes to install or remove it as well. My J D is smoother, cleaner, and just as fast as my 0 turn.

I agree with you 100%. I bought a new LX3310 Cab Kubota with the bucket and front mount snowblower. I DID NOT buy the mid mount mower. I bought instead the Kubota ZD 1211 Diesel Zero turn mower. So much easier get on the zero turn.

@ritterjon

11 ай бұрын

You got yourself a very nice zero turn. I bet you’re loving that setup. Thanks for commenting! Keep on tractoring!

I agree... but also disagree. For most yards a zero turn is perfect. My property, there is a number of places I need to use 4wd. We tried my neighbors zero turn on one hill, it wouldn't climb it, tried side hill... it slides down sideways. I cut straight up and turn around , cut straight down. (in low range and 4wd it just feels safer!) But I also have a 54" instead of a 60". I leave it on almost all the time in the summer with loader work and backhoe work. To each their own... still love my BX (And finally bought a cab!!! Original Tractor Cab going on shortly)

I have a BX 25D with less than 400hrs. I bought a BX 2200 with a mower deck and front plow in show room condition with extras less then 400 hrs for $ 5000. I just spent a day at a equipment show after looking at zero turn mowers and prices I have no regrets.

@ritterjon

11 ай бұрын

Perfect solution for you. Having two BX tractors is a great way to solve that issue! Thanks for the comment! Keep on tractoring!

Disagree. I sold my rider mower and bought the mmm after i already had the BX. One less motor to maintain and frees up space in the garage without the rider. Cost per hour may be higher using the BX, however i feel kts more reliable over the long run. Everyones situation is different so to each thier own.

@ritterjon

11 ай бұрын

You’re absolutely right, everyone’s situation is different. Thanks for watching. Keep on tractoring!

I like my mmm on BX 2670. Drive over, quick attach, less than five minutes to take on and off.

@ritterjon

11 ай бұрын

I used to think it was easy enough to deal with also. However my zero turn is ready always. It’s just easier I guess. Keep on tractoring!

Most people seem to vote that the post hole digger is the worst tractor implement they own.

@ritterjon

11 ай бұрын

I’m sure it would be, if I owned one. However post hole digging I consider tractor work and it’s the best tool for the job. Whereas mowing can be done multiple ways. Keep on tractoring!

I'm so happy I didn't buy a mower deck for my tractor. I've considered a 3 point mower because it has rear discharge deck. You know for the really thick stuff. Not the nice grass.

@ritterjon

11 ай бұрын

Three point mower are beasts! They have a lot more ability. Keep on tractoring!

A 72” mid mount mower for my Kubota tractor is a $4300 add on. No thanks. You can buy a dang nice flail for that, and it’s much more versatile to boot.

@ritterjon

11 ай бұрын

Holy smokes that’s a lot for a mower deck! Your right! Get a flail and have a lot more fun using it! Keep on tractoring!

It's a BX! it's not going to lift very much.. and the tires will not be very big. Want more of both? go with a bigger tractor. BX is only a step up from a riding lawn mower. Just my opinion

Used garden tractors are super easy to find for cheap right now.

@ritterjon

11 ай бұрын

Yep, people have a hard time giving them away. Keep on tractoring!

100% true with John Deere also

I got rid of my Kubota and got a Kioti CS 2220. More lifting capacity than Kubota. Not sorry a bit! Mid mount mower I guess I just work around it!

@ritterjon

11 ай бұрын

Kioti is a great machine and you made a good decision! Keep on tractoring!

I disagree, But that being said in your area i, assuming you have a lot of flat land. In my area they are awesome because of the mountains and hills. Zero turns wont hang on the hills like the BX. But regardless it is not the worst attachment in my opinion. Have a blessed day and keep the videos coming

@ritterjon

11 ай бұрын

That is true, a zero turn doesn’t do steep grades that great. A Ventrac however is the best option for that. Keep on tractoring!

For me it would be a snow blower - Hawaii. Second world be MMM - rocks.

I think if you are going to be mowing with a tractor, a 3pt mower is a better choice. It doesn't take long to put on and off.

@ritterjon

11 ай бұрын

Exactly right! A three point mower gives you more options with less pain. Keep on tractoring!

Where do you use all of these attachments. It appears you live in town.

@ritterjon

11 ай бұрын

I do a lot of jobs around this area and we have 80 acres up north that I often go to. Keep on tractoring!

@realairplane261

11 ай бұрын

Ok, very good. I will keep watching!

4 minutes to get on or off the mmm. Take off on weekly I disagree. It fits my needs As much as you remove snow Same if not more hours than mowing

Jon, you sure know how to rub salt into a wound….. lol. I bought my BX2360 with a MMM deck and without an FEL. I have regretted that decision for the last 10 years. A loader and a rear finishing mower would have worked out much better. But I was able to come up with a better solution. In addition to the BX, I got an L3560 with FEL and cab, along with a Z125S zero turn. After all you really can’t have too many Kubota’s….. lol. My least favorite and most disliked part of the BX is the crazy fuel filter arrangement.

@ritterjon

11 ай бұрын

Sorry about that. 😂 Glad to hear you’ve solved your issues with a other machine and a zero turn. I also can’t stand that stupid fuel filter design. Keep on tractoring!

I agree, my mower deck sits in the shed too. It is difficult to take on and off, I found it is not a very quality deck. I too bought a zero turn mower, mowing with the BX is slow and not a comfortable ride Don’t buy the mower deck people!

@ritterjon

11 ай бұрын

Glad you agree! Thanks for watching and I appreciate the comment. Keep on tractoring!

Thought you were gonna say a post hole auger.

@ritterjon

11 ай бұрын

If I had one I’m sure I might consider it to be a terrible attachment. Keep on tractoring!

Disgree 100%. I bought my 2 series John Deere with MMM for mowing my large lawn. It's my most used attachment.

@ritterjon

11 ай бұрын

If you have a drive over quick connect it’s a different situation. Thanks for watching! Keep on tractoring!

@ctskidoo

11 ай бұрын

@@ritterjon yes, drive over mount, works pretty good

You don't want to get a Craftsman garden tractor the engines are piece of s*** ain't A-Plus there's is no PTO hook up on the backend and snow blowers are hard to hook up to.

Agree JON . Zturn is much better 👍✊

Jon Neil Messick has new video out for you 😀 Zero Turn with some power 😂

No offense but how tall are you? That tractor looks like a toy when you’re standing next to it.

@ritterjon

11 ай бұрын

6’6” with my shoes on. It’s my favorite toy I’ve ever had. Keep on tractoring!

You obviously have unlimited funds!

Disagree….if you have hills Zero Turn is not the way to go…

@ritterjon

11 ай бұрын

They’re not the best on hills. Keep on tractoring!

@brianhillis3701

11 ай бұрын

I will take my toro 2000 on steeper hills than my kioti ck. I can cut everywhere I can walk without worry. I still have to bring out the brush cutter or string trimmer though. I take my zero turn wherever a tracked forestry cutter could go.

Your tittle was really misleading. I’m subscribed but be more honest. No click bait

couldnt agree more back when i had my bx i hated taking the mower on and off all the time so i ended up getting an l3901 and a deere zero turn instead best move i made and love the zero turn saves alot of time mowing ill never not have one again

@ritterjon

11 ай бұрын

Zero turns are amazingly quick and maneuverable. I feel the same way! Keep on tractoring!

8:48