The Muncie Tapes - Part 1 - How to Assemble and Rebuild a Muncie 4 Speed Transmission
Автокөліктер мен көлік құралдары
The Muncie Tapes is a series of instructional videos on how to rebuild and assemble a Muncie 4 Speed Transmission. This parts deals with case preparation.
Muncie 4 speed parts are available from www.5speeds.com/cart
Contact support email is support@5speeds.com
Buy me a coffee? www.buymeacoffee.com/8p7C3hs
Synchro Basics: • How to Rebuild a Munci...
email: support@5speeds.com
Пікірлер: 187
Just ordered a rebuild kit and sliders from him after a talk on the phone absolutely knows his stuff and his knowledge on muncies are great! Thanks again! Anyone needing parts or work dont go anywhere else, listen to the guru lol
your attention to the details is a sign of a true Master..
I am a Chrysler guy, but I really enjoy your videos. They are educational and informative. I can’t wait for one about the A833!
@GearBoxVideo
4 жыл бұрын
I appreciate that! When I get one in the shop it will happen. There is a complete build in my first book.
another great video! great information and no annoying music. Will have my parts order ready in a couple of weeks for you. thanks again.
@e-curb
4 жыл бұрын
I second that. Thanks Paul for not adding music.
Thank you for keeping the art alive for future generations of young gearheads!
WOW. That is good stuff! This channel is going to take off soon, and when it does Paul has the perfect model to make lots and lots of money on the ewetoobs. No swearing, family friendly, hyper informative. Watching this video is like digging into the stocking on Christmas day.
@GearBoxVideo
3 жыл бұрын
Thanks for the compliments. The channel is 11 years old. I wish it could have more reach but unless people share videos the growth will be slow. I appreciate the support.
Thanks Paul... The Saint of Gears, Monarch of Mainshafts, Pope of Synchro’s.🛠
@GearBoxVideo
4 жыл бұрын
That's funny
During this pandemic Paul has been a great help in both parts and the knowledge he has shared in his videos. I pulled the M-21 out of my Chevelle to do a clutch change and ended up rebuilding the transmission with a new AGE supercase, new midplate etc. I just watched one of his videos on rebuilding a Hurst Comp. Plus shifter and it was great and helped me do it. Thanks Paul!
@GearBoxVideo
3 жыл бұрын
Thanks for watching
Paul just watched part 3 of your gearbox tapes , you are a wealth of information when comes to manual gearbox , really nice hardware you use on these rebuilds you don’t cut corners anywhere, I would not have a problem rebuilding my m22 after watching this four tape series thank you for your knowledge
I was beginning to wonder about you. Didn't see you for so long. Nice to have you back giving us your detailed explanations of assembling these older gear boxes. Take care!
@GearBoxVideo
4 жыл бұрын
Thanks, you too!
Great video, can't wait for part 2!
I always look for a new video from you and today there it was. I like the way your are doing this mini series on the Muncie ! Great video, Thank's Paul !!!
@GearBoxVideo
4 жыл бұрын
Thanks so much!
You are the master of anti slush boxes please hang in there for those of who choose our our own gears!!!!!!
Great video! Nice step by step procedure. Thank you for posting.
Great video, Very nice work, thanks very much for sharing 👍👍
That is the right work strategy!
Paul we really appreciate everything you do for us. Thank you soooooooo much.
Thanks for inviting me to hang out, again, with you in your shop at lunch today, Paul; I love your work. I look forward to the rest of the series.
@GearBoxVideo
4 жыл бұрын
Any time!
Awesome video!!! Explained very well!!
@GearBoxVideo
3 жыл бұрын
Glad it was helpful!
Another killer video Paul! Can't wait for part 2.
@GearBoxVideo
4 жыл бұрын
Thank you.
Thank you for taking the time to explain things!
@GearBoxVideo
3 жыл бұрын
Glad it was helpful!
Nice!, I really appreciate you Paul, for taking the time, producing these films for us. Thank you. Larry
Got my autographed copy of the book. Thanks man
What a wealth of information thanks for sharing Paul!
@GearBoxVideo
4 жыл бұрын
My pleasure!
Nice job,love your upgrades and attention to detail,looking forward to the next part.
@GearBoxVideo
4 жыл бұрын
More to come!
Great vid, appreciate the one-over on your upgrades.
great video paul you explain things very thouroughly and you have great techniques and upgrades
Excellent Mentoring, Thanks for the Tech Tips and attention to details.
Love you Muncie video learned alot how to fix and upgrade my 4 speed Muncie thanks
You sir are a real pro! You do great work.
@GearBoxVideo
3 жыл бұрын
I appreciate that!
Amazing, the detail and the content is just brilliant. Thanks a ton. I'm learning so many wonderful things on your channel. Great work 👌👌
Thank you for sharing this! I will be buying parts from you in the future!
Too many things I am learning with you, Paul. Not only about gear boxes but tools and the way of do things professionally. Thank you again.
@GearBoxVideo
4 жыл бұрын
Cool, thanks
This video and all yours others is why I subbed a long time ago great work and explanation of details....... I greatly appreciate you doing all these videos.... Thank You!
@GearBoxVideo
4 жыл бұрын
Thanks for the sub!
Thanks for #1, #2, #3. Looking forward to order a M22 from you after this corona mess.
Thanks Paul great video! Hope it all goes back to normal soon enough.
@GearBoxVideo
4 жыл бұрын
I hope so too
It's quite something to see work done with an attention to detail and such care put in to ensure everything is right for the long haul. That's so sadly rare nowadays.
Very informal and appreciate the attention to detail. Can't wait for the next episode as I am right in the middle of this now...get er dun.. great work as always Paul thanks.
@GearBoxVideo
4 жыл бұрын
Awesome, thank you!
Thank You !!!!
thank you
very helpful information and you present it well. I like your up grades to make the transmission preform better and longer. Coodoos.
Thanks for these tapes, I really appreciate your time and knowledge in understanding the careful assembly of the Muncie, I have your book and will be pulling my M21 for a rebuild shortly.
@GearBoxVideo
3 жыл бұрын
Thank you so much for watching.
Like watching your videos you are awesome
Your book is great, but this vid is fantastic and priceless. Well done.
@GearBoxVideo
3 жыл бұрын
Thanks for the great compliment.
Thank you for what you do! I bought your book, don't use it much but wanted to support. Getting ready to embark on a rebuild on my Corvette's M22. I will be consulting these videos and buying your parts. Please keep turning them out.
Love your videos Paul. Your W58 video set helped me with the seal & drive gear changes on my R154. Now I continue to watch your content as I find it so interesting.
@GearBoxVideo
4 жыл бұрын
Thank you
Paul, As always, GREAT CONTENT , Explained in a clear understandable manner. Thanks for sharing your knowledge & expertise with us. Stay Real.
@GearBoxVideo
4 жыл бұрын
Much appreciated!
Thanks Paul, your the man! Been a fan for years, your dedication to quality work and a precision product is what makes you who you are. All the best, be safe and thanks again for the Muncie Tapes, they help me and everyone to understand and learn.
@GearBoxVideo
3 жыл бұрын
I appreciate that!
Yeah we're at home. Really appreciate your work. It's much better to day dream about the details than to day dream general thoughts.
@GearBoxVideo
4 жыл бұрын
Well said
Another great video Paul! Really enjoy your Muncie videos. Your insight is very helpful and helps me understand what to look for and watch out for when trying to keep my 55 year old Muncie alive and well.
@GearBoxVideo
4 жыл бұрын
Thank you
Ur a legend
Nice!! Top notch, as usual...:-)
Awesome
I bought your book I really like it
Bought the book!! Waiting to assemble my m21. hurry up usps!!!
@patfromamboy
2 жыл бұрын
I just ordered my book today. Now I need an M-22.
I'm a machinist and have a muncie in my garage I was going to use on a land cruiser project. Just wanted to learn more about it. Thank you!
@GearBoxVideo
4 жыл бұрын
Very cool! There is a 4 x 4 conversion for the Muncie I did on this channel for a Land Cruiser
Paul, thank you for all that you do. I have your book, and I am subscribed to your KZread channel, and I look forward to every video that you release. I have a Muncie 4-Speed in my 1970 Corvette and though there are no problems so far (only 18,000 original miles on the car) since she is 50 years old, I don't want to take any chances and I want to be fully informed, and your videos (especially "The Muncie Tapes") do just that. Thank you again and please know that you are doing God's work!
@GearBoxVideo
4 жыл бұрын
Thanks for your support.
Tnx u!
Thank you for the videos. Well detailed, well informed. I’m learning from you and ETCG when you both did the T5 tear down/rebuild in ETCG shop. Would luv to get ur T5 manual if possible? U have a strong work ethic, patience and keep a very clean workspace. I will keep watching and learning. Ty GBV, stay safe take care !!
@GearBoxVideo
3 жыл бұрын
Thanks a bunch. My first book has all the T5 info in it
Thanks for another GREAT video
Awesome information. No one else on the web is even close to the craftsmanship of this man. Paul has one way to assemble, the right way. no corners cut. Everything is disclosed and it's up to you to follow suit. Easier said than done unfortunately
@GearBoxVideo
4 жыл бұрын
Wow, thanks!
I recently rebushed and bearinged a 3 speed model a straight cut trans.
I thought you cracked that side cover when tapping that pin in place.....Nah it was just the locking fluid. Love your channel.
@GearBoxVideo
4 жыл бұрын
You have to have a feel sometimes and the feel and skill is developed over time.
Tips on reamers: A straight flute reamer is called a machine reamer. A spiral flute reamer is a hand reamer. A machine reamer is intended to be used in a milling machine or drill press where the reamer is square to the machine's table. This is because a machine reamer has no lead-in. A hand reamer has a short section on the end that is undersize. This is to guide the reamer into the existing bore. If you are going to ream holes freehand, you should use a spiral flute reamer.
@GearBoxVideo
4 жыл бұрын
Sorry not true. There are many hand reamers that are straight flute. There are also many machine reamers that are spiral flute. You are also making an assumption that you can get any size as a hand reamer and that it has a spiral flute option. I prefer straight flute reamers. Grinding a lead in is no big deal. You have to know what you are doing .
@lewwoodthing
4 жыл бұрын
@@GearBoxVideo Quite the free hand ream on that tail
fantastic knowledge, thank you! Have you ever rebuilt a T98/T18? I have one that needs some work.
@GearBoxVideo
3 жыл бұрын
Sent it in and I'll do a video
Damn that was awesome!! Thank you sir. One question will your mid plate fit all muncie transmissions?
@GearBoxVideo
4 жыл бұрын
Thank you
Subbed! :D London
Is rebuilding a SM465 similar to a m21 m22 ? Love your videos , well done .
@GearBoxVideo
Жыл бұрын
Completely different. You can find GM overhaul manuals on Ebay for the trucks they came in. They are pretty detailed
All these parts you built, like this fork, are they for sale piece by piece? Thank you and your videos are super helpful!
@GearBoxVideo
3 жыл бұрын
Some parts are available on my website. www.5speeds.com
when will the m22 main shafts be back in stock on your site?
Thanks for the vids man, could you reccomend a budget 4spd or 5spd for a 500 ftlb engine
@GearBoxVideo
4 жыл бұрын
I don't know what your budget is. Most engines are built on a budget and have new parts. Most 4 or 5 speeds are 30 to 40 years old now. So usually it depends on your application.
I'm about to undertake the rebuild of my M21. Your videos are amazing...so much great info. Thanks for them. One question...does the input shaft bearing press on/off, or will it be something I can remove at home without a press?
@GearBoxVideo
3 жыл бұрын
Sometimes older ones will slide off, replacements are tighter
@vbrad5111
3 жыл бұрын
@@GearBoxVideo I'll give it a shot. Thanks.
@vbrad5111
3 жыл бұрын
She's on there pretty good. Bearing splitter, or machine shop?
@GearBoxVideo
3 жыл бұрын
Depends on your budget.i would invest on my own splitter puller
My 67 olds m21 has been sitting for 45 yrs,never been opened up,still has original gear lube, been doing an amateur resto on the car. I guess I'll just change the lube and replace real seal and see what happens,it has 76,000 mi on it but had no issues back in the day.(wonder if this is a bad idea)🛠️
@GearBoxVideo
4 жыл бұрын
Why not? Usually they are fine.
Had a question. Pulled the trans out.was shifting fine. Replaced the rear tailshaft bushing,seal and slip yoke. Replaced the trans mount. I'm having an issue with 3rd gear. Seems to pop out of third and some times grinding getting into 3rd. Was completely fine before. Is there something out of adjustment?
@GearBoxVideo
3 жыл бұрын
Yes, your clutch. Give it less freeplay
Great video Thanks Do you have a book on the super T10? I have one and I would like to overhaul it.
@GearBoxVideo
4 жыл бұрын
Yes my book Building and Modifying HP transmissions covers it. It's available direct at www.5speeds.com/cart
oh! what about gear rhonda?
Love ur channel u kick ass 👍
I ordered your T5 book and I can't wait to get it in!! Do you sell upgrade parts for the Ford T5? Also, do you sell complete Ford T5's that have been upgraded? I haven't decided if I want to try and build mine or just buy a new one.
@GearBoxVideo
2 жыл бұрын
Thanks for getting the book. I am currently not selling T5 parts much or complete units
@TheVenom8343
2 жыл бұрын
@@GearBoxVideo Man, I sure would like to have bought one from you because you are the man Paul!! The way you are so precise with everything is just hard to find these days. I found a 500 horsepower T-5 from Pro Motion Powertrain for $2700 bucks so I guess that's the route that I'll go.
@lunk5155
2 жыл бұрын
A am
How much clearance do you give shifter shafts? .0005", .001" or .0015"? thanks, Dan
@GearBoxVideo
3 жыл бұрын
001
What exactly are you using for greasing the seals and stuff? The red grease..
@GearBoxVideo
Жыл бұрын
I use any light wheel bearing grease.
What type of hand file are you using to flatten out the surfaces?
@GearBoxVideo
3 жыл бұрын
Flat files are available from any tool supply store and even Home Depot. Fine tooth files
I’d like to rebuild an M-22. What is a good way to find a good rebuildable M-22? I ordered your book. I have a 66 Chevelle with a strong 427 and have only had automatic transmissions in my Chevys.
@GearBoxVideo
2 жыл бұрын
swap meets. Stay away from Ebay
@patfromamboy
2 жыл бұрын
@@GearBoxVideo Thanks for the advice! I need to read your book that just arrived.
I have a Muncie 3-speed. Are the parts for rebuild available? Seems like at most retailers the default is 4-speed only. Any notable differences?
@GearBoxVideo
2 жыл бұрын
Yes. Different parts. No longer available
I noticed on my cover, once it’s all set up, I can actually shift it into 4th then also into 1st gear at the same time. Is this normal? I thought it should never be able to shift in multiple gears at once. It will block any other gear combination and shifts great otherwise. 20lbs spring, OEM shift arms, autogear detent levers, OEM shift forks.
@GearBoxVideo
Ай бұрын
That would be impossible if the interlocks are in place correctly
GO PAUL ! CAN YOU HOOK UP A MUNCIE TO A HONDA K SERIES ENGINE ? FOR REAR WHEEL DRIVE OF COURSE ! I'VE SEEN A GFORCE TRANS BEHIND ONE... DO THEY HAVE THE SAME BOLT PATTERN ?
@GearBoxVideo
4 жыл бұрын
Yes they do. I don't know who makes the adapter. Maybe G-force?
This was so cool. Do you sell the parts you used in the video???
@GearBoxVideo
7 ай бұрын
Yes I do . Read the video description
@danielkey929
7 ай бұрын
Looks like rebuild kits for 64/65 Muncie's are sold out...@@GearBoxVideo
@GearBoxVideo
7 ай бұрын
These will be back in stock this week. Make sure yo use the notify me button on the product page
GearBox, do you know anything about the thrust bearing in a Muncie sm318? If so, I believe mine came apart and was wondering where to get a replacement. Thanks.
@GearBoxVideo
2 жыл бұрын
You mean thrust washer?
@gabebraun4210
2 жыл бұрын
No. It’s shown as a thrust bearing sandwiched between the reverse idler gear and a thrust bearing washer. Can send you some pictures. Only guy I can find with any knowledge on muncies.
@GearBoxVideo
2 жыл бұрын
Send to support@5speeds.com
@gabebraun4210
2 жыл бұрын
Thanks. Sent you 2 emails with a few pics.
Hello, I have a Muncie sm318 3-speed. Will your book and videos be a decent guide for me if I end up tearing into the 318? Thanks.
@GearBoxVideo
2 жыл бұрын
No. You can get overhaul manuals for your vehicle which you should invest in. They cover in great detail the overhaul of that transmission
@gabebraun4210
2 жыл бұрын
Or any advice on rebuilding the 318? Trying to do this on my elementary teacher budget!
@gabebraun4210
2 жыл бұрын
Thanks for your advice.
Ok,I am ready for Class, my first day. I went thru Votech Truck Diesel. We two guys per team and we rebuilt a semi-truck transmission. Well, y partner did all the work because I was going to school to get my GI Bill check every month and I had to be enrolled in a university accredited school. I cut way too many classes going over to my new girlfriend's house, and she woke up around 9 am. The class started at 7am we were in the shop by 8 am and I was in her bed by 8:30. Back at school by 10 am just in time for inside the classroom. O I'm not as sharp as I should be. Well at the time I couldn't tell you about RoadRanger transmissions. Well I can still do the Power comes in through the input shaft, to first gear on primary bla bla and it leaves thru the output shaft. But was on top of my game when it came to 18-year-old girls. lol. Ok back to class.
@GearBoxVideo
3 жыл бұрын
But you learned the facts of Life
Where can I get a new case for a M21 or M22 ? My existing case is totaled!!
@GearBoxVideo
Жыл бұрын
Caes right now are getting hard to come by. Try Ebay.
What's your opinion of the Richmond Gear Super T-10 Plus 4 Speed? Are they up to your standards? Thanks.
@GearBoxVideo
2 жыл бұрын
The ones we build.. Yes. I think they are a great street 4 speed for cars with proper rear end gear and no more than 450hp
@joesmith306
2 жыл бұрын
@@GearBoxVideo 450hp might be a problem. I have a BBC in a 78 nova putting out 500-550hp and maybe the same on torque.
@GearBoxVideo
2 жыл бұрын
Also depends on the rear axle. You need to run a min of 3.73 gears no 3.08 gears. Maybe a new TKX 5 speed would be better
naprawia pan jeden rodzaj skrzyń na tych filmach ?
@GearBoxVideo
4 жыл бұрын
Tak. Ale nadal możesz się uczyć.
Is there a big demand for this transmission?
@GearBoxVideo
4 жыл бұрын
Huge demand. Has been for 40 years believe it or not.
@shelbyavant5081
4 жыл бұрын
Damn straight.
Did I miss it? or did you forget to tell people to clean everything after filing the surfaces??
@GearBoxVideo
4 жыл бұрын
I'm not going to waste time teaching shop basics. If you can't comprehend the importance of clean work and you would leave metal filings in a transmission case because you lack basic skills and need to be told to clean surfaces should you really be doing this type of work in the first place? It's like reading a recipe. Does one need to be told how to crack an egg?
what's the size and brand of the reamer?
@GearBoxVideo
Жыл бұрын
Which reamer? I use several in my work. Be specific
@Angry_monk
Жыл бұрын
@@GearBoxVideo The reamer used to open up the bore (750 thousands) on the cover and side extension.
@GearBoxVideo
Жыл бұрын
.751
I bought my hydraulic press just to make it easier to rebuild my Muncie.
@tonyd7342
3 жыл бұрын
A good improvement to any shop or garage👍
@patfromamboy
2 жыл бұрын
What kind did you get? I need one. What do you use it for? Thanks!
I thought iron mid plates and or iron cases were stronger than aluminum.
@GearBoxVideo
4 жыл бұрын
I make an iron midplate for the Muncie. Question is do you need overkill? For a normal driver a billet midplate is stronger and more accurate then the cast plate.
@joe-hp4nk
4 жыл бұрын
@@GearBoxVideo Fair enough, I just remember that iron cases and mid plates didn't flex for a stronger transmission for racing.
@GearBoxVideo
4 жыл бұрын
As mentioned depends. Most of the time an iron midplate will girdle any flex
what about putting the tail stock in moms oven at 300 for 30 minutes?? I would suggest gear rhonda oven- but she might shoot me
@GearBoxVideo
4 жыл бұрын
What would the point be? To waste 30 mins of time to press in a bushing? I'm not getting this
@samstewart4807
4 жыл бұрын
@@GearBoxVideo hi I simply want to avoid pressing it- You have extras- I dont
@e-curb
4 жыл бұрын
@@samstewart4807 .. The only time you need to heat something up before pressing something into it is if your press fit is so great, it will damage the bore when done cold. There is no such press fit anywhere on this gearbox.
Only issue..... when you have clean, ready to install parts laid out on the bench, DO NOT start filing on something right next to them!! Where are those shavings going? Pick up the case and file on it AWAY from the clean parts. Thats just me I guess.
@GearBoxVideo
3 жыл бұрын
I'm smart enough to make sure the parts are clean going in. Thanks for your concern.
Awesome