The horn is sounded, the grill installed and the bonnet latches are latching. Bugeye Build Ep. 128
Автокөліктер мен көлік құралдары
The Bugeye's grill is secured to the bonnet and the latches are put in place. In episode 127 I forgot to let you know how the horn sounded... watch this video and then you'll know.
Here's the link to the AHEXP forum thread I mentioned regarding the latches for the front flip hood: tinyurl.com/32kr3d9x
Just a quick disclaimer... this may not be the "correct" way to do this job but it's how I did it with what resources I have on hand.
We would love to hear from you! If you have a questions or suggestions please leave them in the comments section or send me an e-mail at the address below.
E-mail: econoboxgarage@gmail.com
Follow our adventure with what I hope to be fairly regular updates. Leave any questions in the comments section below. Please like, comment and subscribe... oh, and hit that little bell icon so that you'll be notified when the next video is available. Once you've done that check out our social media links!
Instagram: i_c_cars
Blogger: www.econoboxcafe.com
If you'd like to support the channel you'll find that Econobox Garage mugs, shirts & hoodies are available here... teespring.com/econobox-garage...
You can also do so while shopping on Amazon by clicking on our Affiliate link first. It doesn't cost you anything extra and we make a small commission from qualifying orders.
Amazon Canada: amzn.to/3Gu1YDd
Amazon USA: amzn.to/3X3QQ6X
Equipment used to produce this video:
Motorola Moto g7 play
Amazon Canada: amzn.to/38oZBRh
Amazon USA: amzn.to/3DusPN1
Thanks for joining me in the garage!
Artwork for profile picture, start and end screen used by permission: bit.ly/3sSLcrC
#bugeyesprite #frogeyesprite #austinhealeysprite #mk1sprite
Пікірлер: 20
Genius solution for the hood latches! You have put a lot of thought into the project as well as the hard work. Well done!
@EconoboxGarage
11 ай бұрын
Thanks Gareth.
I’m taking credit for the testing of the horn in this video!
@EconoboxGarage
11 ай бұрын
And so you should :)
Wonderful job on the front grill and front flip hood latches.
@EconoboxGarage
11 ай бұрын
Thank you.
I really like your bonnet latches - so much better than strap configurations you see on other front opening modifications. I did see one setup - I think on BugEyeGuy's website, where they had used a pair of Corvette latches in the normal place in front of the windscreen. Seemed to work really well but it leaves the sides unsupported - but so does the original system. Now that we have heard the horn I think it's well past the time we heard the engine running. I suspect you already have - I know I certainly would have started it as soon as it was installed.
@EconoboxGarage
11 ай бұрын
Thanks. I wanted something that didn't look out of place and was relatively straightforward to install.
holy cow, good and loud is right, LOL. Your bonnet latch is a good solution. It hides nicely. My father attached those rubber T straps to his race car (that's in the garage) and they really stuck out proud from the fender below the bonent when not in use, they caused rot in that section of the rocker panel, and I'm not a fan of them. I would rather have leather straps than that big rubber T handle, but on his race car I intended to use hood pins (somehow) that I bought from Summit Racing. But they'll be fine because it's a race car. Haven't figured that out yet. The other bugeyes in the garage open the original direction, which I'll have to change LOL
@EconoboxGarage
11 ай бұрын
Thanks Ken.
Great Video Ian! I want to use that latch system on my bugeye build. Your car is looking fantastic!
@EconoboxGarage
11 ай бұрын
Thanks Rick. It seems to be working really well.
Great way to latch the bonnet. It may be time to replace that hammer though.
@EconoboxGarage
11 ай бұрын
You may be right LOL
Looks great, and I love the sound of that horn! Did you put a link in one of the previous videos saying where you got it?
@EconoboxGarage
11 ай бұрын
Thanks Trevor. I had that horn setup sitting in my garage for years. Decided it was a good time to use it!
Hi Ian did you have a problem fitting the bonnet seal. Mine tight to fit in channel
@EconoboxGarage
9 ай бұрын
I used the original one and secured it with a few spots of silicone.
Spire clips?
@EconoboxGarage
11 ай бұрын
That's the name!