I too use my micrometer like that; works like a charm. 🤣🤣 Love this Penny Farthing contraption.

The fine thread on the machinists clamp allows it to to clamp extra tight. Good job! 😆 You come up with some interesting ideas, good fun video 👍

@DktheWelder

Жыл бұрын

Haha thanks mate. Looking forward to seeing your next creation! Also could you find me on Facebook if you want I would like to ask you some flying machine questions , dkthewelder on Facebook

@Ben-Dixey

Жыл бұрын

@@DktheWeldersent you a message 👍

Very cool build and ride-around. I'm an American and have been forced to move by my neighbors several times for enjoying this version of "the pursuit of happiness".

@DktheWelder

9 ай бұрын

Haha yes I am lucky to have good neighbours!

Bro, i was having cones and the chicken safety joke almost killed me 😂

@DktheWelder

Жыл бұрын

Haha !

@kingmarz3635

Жыл бұрын

I just love cones

@lumotroph

11 ай бұрын

No ways dude the machinist clamp 😂😂😂

Loving the tool humour :)

@DktheWelder

Жыл бұрын

Haha I am just waiting for someone to think I am seriously doing that will be funny

@markt9028

Жыл бұрын

The metric ones only work on metric bolts, i used a imperial one and it rounded it.

Powered Penny-farthing. Nice!

You definitely made me laugh out loud with the clamp. Thanks for that!

You already know how much I enjoy this 😂

@DktheWelder

Жыл бұрын

I really liked your one ! Must have been so scary , mine is a lot closer to the ground

The mad scientist

"Borrowed this little clamp". 🤣🤣🤣

Yeh, a mate gave me one of those clamps and said it was good for measuring things to, but the thing I measured, it was no were big enough, so now I use to open my TUI quart bottles, works great!! My misses said it did not have to be down to the nearest millimetre, I said I've been an inch out before and you did not like that!!

@DktheWelder

Жыл бұрын

Haha didn’t know you could measure with it

Totally bonkers! Love it!

Awesome Vid Dk, I think you need to do some merch with chickens wearing safty glasses 😂

thumbs up for wrenching on your mates micrometer.

@DktheWelder

Жыл бұрын

Hopefully he doesn’t see the video

Awesome 👏 Your non stop, love your work. Your funny as too, love the use of your mates special tool, wish I had some chickens too. All the best mate 👍

Damn that's really cool, with a bit of refining that could be something really cool that people would probably buy

@DktheWelder

Жыл бұрын

It is really fun ! But maybe a bit too dangerous haha

Love your videos, this one was particularly hilarious!

Love the forward roll

this guy is amazing

Love the 1 litre oil bottle petrol tank. 🤣

Good job , I may have to make my own version

Awesome.

Just bizarre mate. 😂 But bloody hilarious!

One of your best yet DK, on ya mate...

@DktheWelder

Жыл бұрын

Thanks 👍

man that was super cool!!

@DktheWelder

Жыл бұрын

Thanks Joel 👍

I have to buy one of those clamp things. 👍

I'm glad you added the seat. I was gonna suggest a fender so that when your feet slip off the pegs your nuts don't get sucked between the forks and ripped off. I've read that those powered unicycles are a lot easier to ride because of the suspended foot platforms. It supposedly makes it easier to maintain your center of gravity just slightly in front of the axle. That and they have a gyroscope I believe. Imagine how much fun a portable dirtbike unicycle would be? You can throw a couple in the trunk or the back of a ute and go trail riding with a friend. I look forward to you mastering this

@DktheWelder

Жыл бұрын

Yeah I saw a picture of one, I think a gyroscope would be good. The balance point of this is so small it is difficult to stay in it

@DktheWelder

Жыл бұрын

Also I was going to make a guard so i don’t castrate myself haha

baha this is perfect, I think an off-road adventure is in order lol!!

@DktheWelder

Жыл бұрын

Yes! I need to take it in a motorcross

what a beast of a bike you might start the next off road craze

@DktheWelder

Жыл бұрын

Penny farthing mx racing would be great

Cool wee bike, it would fit in the boot of the Comy

@DktheWelder

Жыл бұрын

It would fit in there great , probably faster too 🤣

This is the most Australian thing I’ve seen in awhile.

@DktheWelder

21 күн бұрын

Imagine how Australian it would have been if I was Australian haha, I’m from New Zealand 👍

@TerraMagnus

21 күн бұрын

@@DktheWelder ahhhhhh damn I’m sorry about that mate. I bet you get that from all the Americans.

I really want one!

@DktheWelder

Жыл бұрын

It is seriously fun to ride

I bet every guy who has tools, the mechanical type, went into a cold sweat when you used the micro as a clamp, I know I did, streuth, lol

@DktheWelder

Жыл бұрын

I can imagine a few guys starting to cry as I did that haha

Love the subtle jokes

@DktheWelder

Жыл бұрын

Thanks

Honestly youtube has been getting boring but i really enjoyed these videos xD hahaha Cool inventions and Gyro batmobile is awesome ima watch the mini tank next!

@DktheWelder

3 ай бұрын

Glad you like it! KZread does get boring there needs to be more people doing interesting builds I think

Daniel... I loved this one.. thanks for the laughs.. hahahahahaaaaaaaaaaaaaaaaaa...................

@DktheWelder

Жыл бұрын

Haha thanks glad you had a laugh 👍

Hahahaha he's stick welding with a tig torch😂😂😂it's genius 4:10

@DktheWelder

Жыл бұрын

A lot of comments on it haha

Even out your body weight distribution...move the foot pegs forward and get most of your leg weight in front of the axle...then you'll be able to get rid of the trainer wheel...👍👍

@DktheWelder

Жыл бұрын

I think the balance point it too small, kinda like doing a wheelie on a 450 is really easy but it is difficult on a kids bike . A gyroscope would be cool

O'no you didnt!!! hahah I love it!

coolest shit iv ever seen

That looks way to fun maybe a rear wheel break will be better

@DktheWelder

Жыл бұрын

It would stop it flipping over so bad ! I’m thinking about making even lower geared and taking it for a ride in bush👍

@BIGSMOKE-bl2lq

Жыл бұрын

@@DktheWelder loer geared use and rear break be a good start maby for a mk2 could try a 21" front wheel bolt sprocket to the rotor use a slightly larger rear wheel would be good off road

Please do a video on doing up that yhat

@DktheWelder

Жыл бұрын

The sail boat? I have some videos of it, I will be taking it out in summer

Bro just made an off road pennyfarthing

Great Effort.....where the Pee Cam.......haha

@DktheWelder

Жыл бұрын

Haha , I would put pee cam in ever video but some people would get sick of it

I must try that axe breaker bar method🤕

@DktheWelder

Жыл бұрын

On really tight bolts I wear a hard hat

Are you using a Tig torch for welding with welding rods?? And if so can you explain how you do????

@DktheWelder

Жыл бұрын

You can but a 2.5mm welding rod into a 2.4mm collet saves swapping leads all the time plus you get the high frequency start

Sad to see that the Lorax scooter is not possible to ride

This is more like a goonicycle.... 😂

What was the stick in the tig torch? never seen that before?

@DktheWelder

Жыл бұрын

A 2.5 mm welding rod fits in the 2.4mm collet so you don’t have to swap leads and you get the high frequency start which is really good

You need some other lights dude... the flashing is giving me a headache ;)

haha cracker job bro needs some ape hangers n saddle bags hehe

@DktheWelder

Жыл бұрын

Haha yes!

Hahaha that mic bit painful laugh

@DktheWelder

Жыл бұрын

I think that would hurt a lot of people!

Is that MMA welding with a TIG torch?

@DktheWelder

Жыл бұрын

Sure is , works great

Haven't laught like that in a while good s%=t bro

@DktheWelder

11 ай бұрын

Haha cool thanks

the unitronk lol

@DktheWelder

Жыл бұрын

Unitonk you mean

One loss death machine mate keep on dreaming them up 😂

@DktheWelder

Жыл бұрын

I have too many dangerous ideas!

did he use a tig torch as an arc stinger

@DktheWelder

Жыл бұрын

Yeah it saves swapping leads all the time plus you get the high frequency start which is great

@the3dprintingkid477

Жыл бұрын

@@DktheWelder does it destroy the gas lens or do you not have one

@DktheWelder

Жыл бұрын

@@the3dprintingkid477 the diffuser? I don’t have one on this cup but no it doesn’t ruin them

@the3dprintingkid477

Жыл бұрын

@@DktheWelder thanks for the help i will give it a try btw i also live in nz

@DktheWelder

Жыл бұрын

@@the3dprintingkid477 o cool where abouts?

Needs a gyro👌

@DktheWelder

7 ай бұрын

I think a gyro would help

i want you to use an arduino and a balance sensor to help you balance xD

@DktheWelder

Жыл бұрын

Not sure how I would hook that up to a gas motor

@NamacilHDx

Жыл бұрын

@@DktheWelder electric throttle and a servo to the carb... so the Arduino does the throttle based on your input but also adds or takes away throttle if you are beginning to lean to fast xD

@NamacilHDx

Жыл бұрын

i could help a little with programming if you need me to

@DktheWelder

Жыл бұрын

@@NamacilHDx I know what you mean but I think the gas motor wouldn’t respond quickly enough and I have no idea about that stuff too, thanks for the offer to help I think it would maybe work on the brake too?

@NamacilHDx

Жыл бұрын

@@DktheWelder I think you are totally right about the engine being to sluggish and I thought about the breakes too but ... I think servo breakes would be harder because of the force needed... I think this whole idea would only be a help and still need some skill and lots of tuning to drive ... But if you think a computer can't do it because the engine is to sluggish, how did you expect a human to do it then ? XD

Do your neighbors ever complain about noise pollution?

@DktheWelder

Жыл бұрын

Na I have really cool neighbours the watch what I am doing sometimes

@MasterIvo

Жыл бұрын

@@DktheWelder that's great

UNSUBSCRIBE! The one time my wife happens to be watching over my shoulder is when the chickens make an appearance.... She keeps telling me to put our chickens in the videos and now says "I told you"!!!!!

@DktheWelder

Жыл бұрын

Haha. I can’t help putting them in there they are way too friendly

@DktheWelder

Жыл бұрын

Also where is your penny-farming? Can you ride that thing? I just been on your channel looking for it

@PatonMachines

Жыл бұрын

@@DktheWelder one of ours is scratching at the concrete floor in my shed trying to make a nest!

@PatonMachines

Жыл бұрын

@@DktheWelder Where is it? Right where I left it... It lost the vote with Pigeon for next in line.