Things like this are why I watch KZread videos. This just might work, maybe. I'll be here for the next video.

@DktheWelder

21 күн бұрын

Thanks, I will make it work haha

@jaredpursey3791

20 күн бұрын

And not just a one off crazy build to bring in subscribers. Man’s a mad scientist 😂

Dude no worries, you're building some wild shit in your shed with your own money. Take all the time you need. ❤ from usa

@DktheWelder

21 күн бұрын

Thanks I really enjoy working on it

This is the fine line between janky and genius that i truly admire

@DktheWelder

19 күн бұрын

It’s a thin line and I often fall to the janky side haha

You explained very well and added some tasteful antics. Nice work!

You definitely come up with some issues but it's great to see you work through them Great stuff..

@DktheWelder

21 күн бұрын

A lot of issues!

Nice work mate. Wish i lived in NZ to come check it out in person. Glad the word "Munted" has reached you guys.

Great work. Love the center hub steering. Bimota style

The glove caught in the gear … Amazing haha

You build like I did when i still could, Love it!

Love your work. Love how your mind works as well mate. Cheers

nice swing arm, bad ass batbike :)

Right on keep it up. Stoked to see how it turns out.

@DktheWelder

21 күн бұрын

Thanks ! Wish I could work on it full time!

Don't worry about it. Take your time. I'm enjoying the ride!

@DktheWelder

21 күн бұрын

There is a lot of backwards and forward working with whatever I can find but it is getting there 👍

Bloody (nearly) good job Man !!!...... sometimes you just gotta step back from a project for a bit ...... very looking forward to see the next installment !!! 😉🙃😎

Love the ingenuity.

Ok you got me. Your oddiously is addictive!

Pretty sweet, wished the video was longer 👍

the sheer talent man love the build

@DktheWelder

21 күн бұрын

👍

Window wiper motors are a good source of free high torque motor setups be good for the front

@DktheWelder

21 күн бұрын

Someone I tried wiper motors on something once didn’t seem that good but maybe I had small ones

@BIGSMOKE-bl2lq

21 күн бұрын

@DktheWelder have used a couple before with varying results some are better than others

Enjoyed watching from South Island New Zealand we understand it’s hard to weld a shitload of stuff raise a family hold down a full-time job and upload videos takes a minute Your humor reminds me of Billy T And bike looks so sick!

@DktheWelder

21 күн бұрын

Haha Billy t is the man , thanks for the kind comment I often see you commenting 👍

This thing has come along way bud

Man, that thing is going to be so much fun!

@DktheWelder

21 күн бұрын

I hope so!

Today's video is sponsored by NZ's world famous steel toed safety crocs.

Love it! All great engineering aside, this made me laugh out loud!

@DktheWelder

21 күн бұрын

Thanks

Take a page from the Monoracer and instead of stationary balance use retractable outrigger wheels that also work as wheels against the ground when retracted in the event of a tipover. I recall one clip where it was deliberately driven in a turn so tight it laid down onto the retracted wheel, was stopped, and then was recovered in the same way. Your Batbike might not be able to do exactly that maneuver, but the general crash safety principal (not to mention saving the bodywork) is the same.

terrifyingly wicked cool

@DktheWelder

21 күн бұрын

Terrifyingly dangerous cool!

Keep it coming! Love it

@DktheWelder

21 күн бұрын

Thankyou !👍👍

Reminds me of a Military osprey, you gotta be moving before you start lifting up.

Your shenanigans always cracks me up!😅 Don't ever change!!👍 "Holy batshit Batman!".

Me encanta como va quedando así de dos ruedas

Most people watch and criticize, you sir are a creative master.

@DktheWelder

21 күн бұрын

Thanks

love your videos. Steering and levelling mechanism are pretty cool👍

@DktheWelder

21 күн бұрын

I think it will work out well 👍

I think for the system to help make it stand. Find out what threads are the quickest for up down motion. Id use them to make like almost hydraulic skids that are quick enough. But to help that i almost wonder if u can make a gyro inside the wheel you might need 2 side by side one might need to spin opposite of the other. And can possibly use like mini bike drum brake pads to stop it.

Awesome build

@DktheWelder

21 күн бұрын

Thanks

Hell ya brother!! I love this project!

@DktheWelder

21 күн бұрын

It is a challenging yet fun project

Awesome build!

@DktheWelder

21 күн бұрын

Thanks!

A 98 Honda XR650 rear shock should be cheap and available where you are and have more than enough adjustment for rebound👌

entertaining with creativity, mechanical design and fabrication, with a hint of danger, my kind of channel, lol

@DktheWelder

21 күн бұрын

Haha I try to easy up on the danger but it just keeps happening!

That real bat bike build!❤😂

@DktheWelder

21 күн бұрын

Budget Batman

You’re a mad fish in a crazy sea sir.

magic.

He lives

einfach geil!

Almost need a couple of inset wheels on the front bottom edge to ride on until the forks get you off the ground. But then there goes your emergency brake, heh heh.

@DktheWelder

21 күн бұрын

Yeah or some plastic skids , yes it would make a good e brake!

I'm so happy its back on two wheels! This is going to mad once its done

@DktheWelder

21 күн бұрын

Haha the 3 wheel idea wasn’t the go aye! Now there a lot of challenges getting it to balance

Thats cool

Everything is sketchy as fuc....... I love it! 😅

Así de dos ruedas es como debe de quedar intenta poner un giroscopio y que lo gire el escape al centro de la moto como mueven el turbo

There is or was a company called Lit motors that was building a two wheel vehicle, and their balance technology might be good for this guy's project.

@DktheWelder

20 күн бұрын

Yes they have two electric gyroscopes under the seat . That might be what I do but have something else I want to try first

2:31 You're not kidding! These things'll rag-doll ya if you're not careful! Sort of like w/ exploding cut-off disks and getting wire wheels stuck in shoelaces.. If it's Never happened - You've got the best of luck! haha GREAT TIP!!

@DirtyDovi

21 күн бұрын

Your CAD and Fab skills Rock, bro! I was TRYING to follow along as you were designing your worm-gear... Damnit, I'm just too tarded still for this stuff not to fly over my head.. Excellent Job! That turned out amazingly! Hey, how are you liking your K1 Max? I ventured into 3D printing w/ a Bambu Lab X1-C, but as previously mentioned - just too stupid still to grasp CAD [This coming from someone who was schooled in hand/manual mechanical drafting]

@DktheWelder

21 күн бұрын

The cad drawing took quite a long time to learn I just watched lots of KZread videos on fusion 360 , sure you could figure it out

@DirtyDovi

21 күн бұрын

​@@DktheWelder Ah no kidding?! Good on you bro!! I dabbled w/ Auto Cad back in early 2K's then jumped straight into Solid-Works. *That's what completely threw me. Then tried a few others - equally confusing. Fusion 360. Yessir, that's what I've been deep diving into lately. Great program - if/when someone can efficiently use it! Thanks bro, I'll keep pluggin' away for sure!

Always wanted to try and ride a bike with backward steering, I don't think you need the additional challenge with this bike though. Impressive CAD skills, if only it could print metal parts. Have you ever used the printer to make patterns for casting in metal ?

@DktheWelder

21 күн бұрын

I have thought about it a bit but casting looks pretty difficult and time consuming

Fuck yes

I recognised that music at 0:28! Make sure you wear snug fitting underwear when your driving it to keep your bits out of the gears and chain. It's a bit tippy, innit?

@DktheWelder

21 күн бұрын

I might have to wear some tights for safety

👍👍

Ride eternal shiny & chrome 🔥

@DktheWelder

21 күн бұрын

My favourite movie 👍👍👍

@richardthered

21 күн бұрын

@@DktheWelder Mine too 👍🏻 I can see some future mods to the Batbike coming, anti boarding spikes, rear gunner with a MG42 and 50cal Browning machine guns on the sides, flame thrower is a must 😆 Top work by the way, the vids are epic 👍🏻👍🏻

Yep! 😂🤣

Sweeeeet :)

For a channel that is half bloopers already, you know the Blooper section is going to be wound up to 11. :) How the heck are you going to ride this thing without being on your side every few metres? :)

@DktheWelder

21 күн бұрын

I have some ideas to make it balance but it will be difficult!

broken wrist with battery drill; make sure its in 2 gear when it breaks through

⭐⭐

fush and chups mate

6:56 Fist try : D

@DktheWelder

21 күн бұрын

Haha love that movie

Crack up

whoops

😀😂

Burt Munro’s cousin!

Blatman

You've done more tweaking on that bike than a meth-head! Good job!

limp wrist Lmao I work with power tools all the time Its pretty hard to break your wrist if you are right handed. Your an awesome craftsman but Why are you making the bike so small? Batkid bike?

@DktheWelder

21 күн бұрын

It actually started off big but I end up running out of room now !

1:00 Что за музыка на 1:00 играет?

@DktheWelder

21 күн бұрын

It is in the description with a link

@89263230559

20 күн бұрын

@@DktheWelder большое спасибо!