The Blackmagic Pocket Cinema Camera 4K Part 3: Sirui Anamorphic 1.33x Lenses MFT

Тәжірибелік нұсқаулар және стиль

In this 4-part series, I cover features and setup for the BMPCC4K. In this part, I show how to use the Sirui Anamorphic 1.33x Lenses with the BMPCC4K.
00:00 - Intro
01:31 - How Anamorphic Lenses Work
09:16 - Setting up the BMPCC4K for Anamorphic 1.33x
12:09 - Lens Flares
14:22 - Conclusion
Blackmagic Design Pocket Cinema Camera 4K
www.bhphotovideo.com/c/produc...
Sirui 24mm f/2.8 Anamorphic 1.33x Lens (MFT Mount)
www.bhphotovideo.com/c/produc...
Sirui 35mm f/1.8 Anamorphic 1.33x Lens (MFT Mount)
www.bhphotovideo.com/c/produc...
Sirui 50mm f/1.8 Anamorphic 1.33x Lens (MFT Mount)
www.bhphotovideo.com/c/produc...
Sirui 75mm f/1.8 1.33x Anamorphic Lens (Micro Four Thirds)
www.bhphotovideo.com/c/produc...
Tilta Seamless Focus Gear Ring
www.bhphotovideo.com/c/produc...

Пікірлер: 8

  • @linnanjanne
    @linnanjanne Жыл бұрын

    I've been shooting on 4K DCI with 1.33x anamorphic. Blackmagic did recommend that on their forum. For 120fps been using 2.6K 16:9. Results are nice, tho it's 2x crop and a little bit soft. But it gives you a second focal length kinda. And you can always upscale the footage to 4K /8K with Topaz Video AI if needed. Good video 👍

  • @chinfat

    @chinfat

    Жыл бұрын

    Good to know. Thanks for the info!

  • @sojeanify
    @sojeanify7 ай бұрын

    Thanks so much. I've learned a lot from you.

  • @russhu
    @russhu Жыл бұрын

    excellent lens, using

  • @chinfat

    @chinfat

    Жыл бұрын

    Yes. I have loved using the Sirui lenses. Thanks for watching!

  • @jankocbek85
    @jankocbek856 ай бұрын

    I can't decide between 35mm and 50mm MFT for my Blackmagic. Whats the equivalent FOV compared to a spherical lens? Take width of a stage. I used 50mm spherical till now and captured the whole stage, theoretically... Should I go with 35mm anamorphic or 50mm to get the same width of the stage and similar FOV... Pls help :D

  • @r.h.6581
    @r.h.65812 ай бұрын

    Can anyone help me here? I also shot anamorphic with a BMPCC4K and a Sirui 35mm 1.33. Should I set my timeline resolution to 4096x1716 DCI Scope 2.39 or to DCI 4096x2160? The button in camera is on to automatically desquezze x1.33. Thank you allready! Thank you allready for an answer and regards

  • @chinfat

    @chinfat

    2 ай бұрын

    You should have shot in 3840x2160 UHD. Then the 1.33x desqueeze should be an aspect ratio of 2.40:1, so the timeline resolution should be 4096x1716.

Келесі