So here is the deal. I've spent time, hands on, with pretty much every tool box and cabinet that I could get my hands on. Shark, Vault, Baldhead, Saber, Haley, Snap-On, Sonic, (All the cheap ones like Gladiator, Husky, New Age), Moduline, Craftsman, Harbor Freight stuff, Beta, Hazet, Lista, Rousseau, etc. I've done this not as a dealer, but as a consumer wanting to purchase for myself. Dare I say, outside of the people that make the cabinets, I've probably had more time with various brands than most anyone. I've literally traveled around the country touching tool boxes. Personally, I don't have a Sonic or any other tool box. For me, tool boxes are too small. I have fixed cabinet arrays at home and at my studio. If we were to take storage size out of the equation as you'd always win getting a cabinet array and just look at the rest of the package, Snap-On cabinets/tool storage is near the bottom of my list. I'll never forget Tommy Goldberg questioning my sanity when I said Snap-On tool boxes are not even close to the best. Then I took him to the booth at SEMA and watched him open the drawer and see the light bulb go off. 2 to 3 times the cost, and although not the worst, they are not great. They are shiny, which makes them always fingered up. Then they get scratched because you are constantly wiping them down. The drawer glides and wobble to the design as you operate them is easily the wonkiest of all tool boxes. The four finger drawer latch system is really weird although likely expensive to create, feels super cheap. The only drawer latch I find worse is the one from Rousseau. The good part about the Snap-On latch is it works, Rousseau you have to get it just right to be able to open the drawer. Since everyone is touting the superior construction of a Snap-on, why wouldn't you want Austrian drawer glides instead of the cheap ones they use? The Sonic drawer glides are also basic, but they have more feedback and feel sturdier. Snap-on's solution to a "heavy" drawer is to just add two slides per side instead of one. Lista/Rousseau. So...we have a Taiwanese built to Dutch spec tool box that has a far superior fit and finish to all the brands I've listed above. It has inferior drawer glides to Lista/Rousseau, and are generally smaller. The smaller options are much more appropriate for a rolling box for most home garages. I have never done, and likely will never have anything to do with car dealerships, so I don't care much about the argument of how a tool box should function in that environment. For my garage, I'm getting either a Lista box and deal with the American made fit and finish issues or a Sonic box that perfectly fits the best organization system that currently exists.

@richiekyaw9618

Жыл бұрын

100% Agreed!!! When you're paying $10,000+ for a Snap On tool box, array, etc. and you get the quality you get it's fair to say its complete garbage. There's always a dilemma of how Chinese made stuff is cheap, low quality, etc. but when it comes to Taiwan and their manufacturing the precision, fit and finish is unbeatable. Same with the Japanese and German stuff. The KTC nepros tools ratchet's chrome plating, quality, fit and finish puts a Snap-On ratchet to absolute shame! I've been following Matt for quite a while now and its obvious he really takes the time to understand and test all this stuff out down to the tiniest detail so he knows what he's talking about. I understand everyone has different experiences but it's beyond me how one would spent that type of money on Snap-On for the quality you're getting unless you're committed to the idea of getting "Made in USA", products.

@CaptainBreny

Жыл бұрын

Amen!

@interceptor7905

4 ай бұрын

You are right.Snap On is good but not for that price point!Prices are insane!Here in Australia we have another company that makes everything from scratch here in Australia!Company is BAC Systems and is equal to Lista.Quality is far superior comparing to Snap On and some other toolbox brands.When I can I will be buying one of cabinets,also Sonic toolbox is being considered as well.Still lot cheaper than Snap On!

Came here for the comments and was not disappointed!

Snap On makes their own toolboxes

4:11; When I worked at a dealership, we wouldn't need spray cans, but that space would have been very useful for a bolt lubricant spray for stubborn bolts or a brake cleaner for messy jobs.

No doubt PLENTY of fodder for the upcoming podcast! Should be plenty of laughs.

Was so ready to talk smack but they have full extension drawers lol, that was my biggest pet peeve when i was shopping for a box years ago! Looks like some awesome boxes.

Hey Matt, i’m thinking the detent is stronger on the roll around cabinet because it’s mobile. One way to check the MSS+ 870 is Mobil so if the detent is stronger than the non-mobile.MSS+ then they are simply beefing up the mobile cabinets which would make sense. and by the way, I have a 1985 craftsman toolbox top cabinet there is no detent the drawers lock when you close the lid, bottom cabinet no detent the drawers lock only with the key. Definitely planning on getting MSS as I need a corner configuration and of course they’re much more affordable one of these days have a great one.

Damn, there’s a lot of hate on this, I think it’s because your basically saying Snap On boxes are garbage and everyone has there own opinions of stuff but on the other hand people are saying Sonic is garbage, I don’t know I have neither box. Can we all just agree that they are two completely different boxes for different people and situations?

Imagine not owning a Snap On tool box and then defending them to the hills with no validation against the competition. Some people need a reality check

Nice infomercial!

i think the detent is there to dampen the force when you throw the drawer closed

Lmfao. OK bro. Have fun with your Mickey Mouse toolbox. I agree you wouldn’t need a Snap-On tool box for all the washing, polishing and detailing you do on your cars… but saying you’d just put one out on the curb and saying that SONIC toolboxes are far superior is not a statement to be taken seriously from anyone watching this. Especially coming from someone who’s never done more than changing oil or taking a wheel off a car. Nice floors though.

@ObsessedGarage

Жыл бұрын

Ah...yes the old blue collar superiority complex. That's my favorite.

@NSXavier997

Жыл бұрын

@@ObsessedGarage Proud to be blue collar brotha. 🍻

@NSXavier997

Жыл бұрын

@@ObsessedGarage what’s part of the plan? You learning to actually turn a wrench? 🍿

@ObsessedGarage

Жыл бұрын

I can see that.

@CountryMileGarage

Жыл бұрын

Amen @NSXavierTV this guy is kicking his potential customers and wonders why we as in blue collar people don't like it

Snapon toolboxes are made in Algona Iowa, by Americans with American sourced materials. A 30" deep epiq has drawers that are just under 28" deep, and 62" wide. The case and drawers are made out of steel, not aluminum. Lifetime warranty and since snapon makes their product they can get parts for boxes 40+ years old. The sonic box, going off his measurements and their website i cant figure out why the box is about 9-10" wider and about 5" deeper than the biggest drawer. They strangely look alot like the crap matco puts out There is a reason every manufacturer of toolboxs tries to compare their toolbox to snapon. They build something cheaper then market it as being the same or better.

@ratherbout

Жыл бұрын

If we want to be more fair as far as storage space in either cubic-in or sq-in, you are probably closer to a snapon KCP1422. So you are looking at just over 8k MSRP which you'd probably pay closer to high 5k? But be getting USA made box. That has been engineered and built to be durable, and still look amazing. Oh and has a power drawer for your made in Murphy NC power tools...

@ObsessedGarage

Жыл бұрын

If you put your hands on a Snap-On Epiq then these, even if they cost the same, I'd buy this.

@willc5979

Жыл бұрын

​@ObsessedGarage you obviously have never been near a epiq. If you're around the the nyc, NJ area I'll give you a tour of mine and you'll change your mind.

@ObsessedGarage

Жыл бұрын

@@willc5979 I've spent tons of time with them. I wanted one more than I wanted a 911. That was until I got my hands on one.

@tristanmerrill7563

Жыл бұрын

​@@ObsessedGarage you obviously have no idea what your talking about, you claimed that snap on didn't make there own boxes😂😂. Your a salesman. I hope you feel good bout the false information your putting out.

I was very unimpressed when I saw my first Snap On live. WTF ? LISTA, HAZET, etc is another level. Cheers from Germany. Porsche and Audi uses Sonic tool storage, says a lot.

Decided on Mac over Snap-on 20yrs ago. Got a 50% student discount at the time.

I definitely agree on the cost of Snap-On boxes being ridiculous, but they are far from being shit toolboxes. Personally for me I think Snap-On do better drawer layouts with their boxes than what Sonic has to offer but there are other brands offering similar setups. Only reason I own a Snap-on box is I live in New Zealand and we don't exactly have a good selection to choose from.

@interceptor7905

Жыл бұрын

Here in Australia same thing

@themurdock619

6 ай бұрын

I'm sure he is paid to promote these toolboxes so any shit talk with other things is worth its weight. It's be nice if someone could send me boxes and test them out. Lol

Boils down to, do I want to spend money on tools or the storage? The Husky drawers have worked just fine for me, I'd rather splurge extra on tools and spend it on projects. You can only reinvent a drawer so much. If I really see that the standard husky stuff isnt enough, I might get the pro version and call it a day. Those are Car prices for a full set for tools boxes, not even tools lol.

15:50 What is this red array? I can’t find a video on it?

@PabloConcrete

Жыл бұрын

This is a new line Matt and the team are working on. It can be shipped flat-packed. It was discussed in inside the hex.

@WoodWerksUSA

Жыл бұрын

@@PabloConcrete Nice I will go watch that one.

@ptsgt3838

Жыл бұрын

​@@PabloConcrete Can you relay any info on it? I'm intrigued

@ObsessedGarage

Жыл бұрын

It is a cabinet line that my friend invested in years ago and ended up with the IP and some left over stock. He shipped me enough to put an array together. I hate pretty much everything about it, but it is a good starting point toward making my own line that fits in between the big box low-end stuff and the crazy stuff.

@WoodWerksUSA

Жыл бұрын

@@ObsessedGarage really cool concept. You will make it great.

I need to put a machine that weighs 132 lbs on top of something like the S9. Can the top hold that much weight?

@ObsessedGarage

5 ай бұрын

I think that would be okay.

One day Matt, one day!!

For me, quality overrides where it was made. We're all from the same planet. The old adage " you get what you pay for" applies here, as well.

The cabinets look legit. not sold on Sonic as a tool provider, but they are on top of the storage side. Agree that Snap-On and others in that strata are cruising, particularly at the price. It pains me to say, but at this point I think the Harbor Freight next generation line is a better buy than Snap On.

I love the hate everyone is giving like on one side he did ask for it with the lack of knowledge of snap on boxes. Snap On does make their own boxes and has better layout. Snap on has great boxes that get improvements based on what auto, aviation, moto, and race car techs say. Saying that snap on makes crap is ignorant. That being said layout, locking mechanism, styling, and if it only fits screwdrivers in one drawer with no extra room is honestly personal preference. If he likes how that box looks and feels then screw it not my money. It’s like saying you prefer matco ratchets over snap on. I know so many people that use so many companies of toolboxes. I prefer snap on boxes with the only gripe is my prybars are too long for the drawers but my buddy prefers matco boxes. At the end of the day it’s personal preference and if anyone wants to combat me with this say how I know. I work on off-road race vehicles as well as normal automotive and I have used harbor freight stuff and it work just fine in some situations

@ObsessedGarage

Жыл бұрын

I'm still pretty sure they are contract manufactured by someone else in the US. I've spent a lot of time with them. They aren't good. Sorry.

Nice boxes but most auto, diesel, heavy equipment and aviation technicians use and need some type of variety of drawer depth sizes. Most of those boxes lack that. Also need to roll around a big shop like for heavy equipment and aviation facilities. Like I said nice boxes just lack what most of us need.

I'm actually looking at SONIC for my kitchen design... have you seen anyone using them for that? Looking for build ideas... even considering the price point.

@ObsessedGarage

8 ай бұрын

I haven’t seen that, but could be cool in the right place.

Nice boxes but the Sonic logo on the bottom ruins it with the cheap look. Is it a decal that can easily be removed? YOU are the one who removes badges off of all your cars so you might understand where I am coming from.

You said the s9 box was 2300. And its 30 some inches wide 20 inches deep. A brand new lift top snap on 40" wide cart is 2300 msrp and you can definitely get it cheaper than that on a truck if you know your dealer. The lower end snapon boxes dont have the best slides but any of the higher end boxes have 250lb slides. Thats why the feel like crap when they are empty, theg are desigbed to have weight in them. Id love to see the top drawer of that s12 box bust when you have it full of sockets up to 1" drive. Notice how he doesnt even talk about the weight ratung of the slides😂

@ObsessedGarage

Жыл бұрын

If the Epiq is junk, the lower end versions are even worse. If you have 1" drive, you'd better be buying a Lista.

You need to get your hands on a Beta tools toolbox!

@ObsessedGarage

Жыл бұрын

Yeah, I've spent a little time with those. I believe they are made by the same company as Hazet. They looked very similar.

Love it, but why do they have junk looking casters?

@niteninja0133

Жыл бұрын

Because they are China made. What do you expect

@ObsessedGarage

Жыл бұрын

The castors are pretty legit.

I want an S12XD so bad. And Snap-On dont have anything on Sonic

@FusionBoost2.0

Жыл бұрын

Yeah ok 🤣🤣🤣

@CaptainBreny

Жыл бұрын

@@FusionBoost2.0 Do they even come with tools? Foam inlays?

@FusionBoost2.0

Жыл бұрын

@@CaptainBreny No you buy you're own tools 🤣 and snap on sells pretty well anything now in foam

@FusionBoost2.0

Жыл бұрын

@@CaptainBreny sorry you don't like good tools

@CaptainBreny

Жыл бұрын

@@FusionBoost2.0 A new Snap-On kmp1022 cost 12 fu*ing grand. No Foam. No nice closing drawers like the Sonic boxes. Now im even more in shock after googling prices for snap-on boxxes 😆

so we just forget about the video where you were organizing 3k tools or something like that, and your guys are on hot mic saying sonic tools suck.

@ObsessedGarage

Жыл бұрын

What? Ha, ha…

Whats a toolbox that is between a sonic and lets say a nice Kobalt?

@ObsessedGarage

Жыл бұрын

There really isn't one. There is a real void in the market.

@djsi38t

8 ай бұрын

Proto Toolboxes...right in the middle and very nice boxes.

If I was buying Sonic tools in the foam, I would get one of those 2 smaller boxes. And, I would get multiples if I needed more storage. The big box just isn't appealing. That big top drawer is just way too deep and wastes too much storage space. For those prices though, I would look at lot harder at Tekton boxes with better drawer slides and made in Canada.

@ObsessedGarage

9 ай бұрын

The top drawer isn't a good fit for hand tools. It's the perfect size to store some power tools.

@ obsessedgarage Are you huffin’ paint again buddy?

@ObsessedGarage

Жыл бұрын

I am not. Most people that have bought a Snap-on box have never experienced others outside of Matco or Craftsman. I've had hands on almost all of them.

Snap on is not the be-all end-all of tool boxes. They're just not. While I appreciate the fit and finish of these Sonic boxes, in the end I still think I'd rather have a made in USA, made in Canada, or made in Europe box that's a little "rough around the edges" but will last me my lifetime over a made in Asia box that looks nicer but will only hold up half as long. Maybe these Sonics are the exception to that but so far I haven't seen anything from Asia holding up over the long term.

@ObsessedGarage

Жыл бұрын

Agreed

@masih9595

4 ай бұрын

Sonic is a Dutch company

👍

Only recently started following you Matt and so far you've really made me start to think about how crap snap-on really is especially the toolboxes and the ridiculous. As a diesel tech in the UK and getting to see all the boxes I completely agree with how rubbish the slides are. I did plan on getting an EPIQ as to be honest I didn't there was much better out there for the price, from my experience in the trade everyone has either Snap-on, Mac or just your generic cheap boxes. However these look extremely well built, but my question is will they be making a hutch/riser for these as it's a must in my workplace? But I appreciate the podcasts and your dedication to try and make people aware of quality products. Really opened my eyes thankyou.

@ObsessedGarage

Жыл бұрын

I don’t think they will make hutches for them. I’d be inclined to do fixed cabinets if you plan to build a big box.

24:55

I got up early on the West Coast! 😂

The tops of those look like the trash home depot sells 😂😂

Matt would be singing a different song if he had the rights to SELL snappy stuff… but he doesn’t. Because he’s not an AD. You need to put in work, buy a truck, and manage a route to get that right. Only reason he’s pushing this SONIC bs is because he’s a distributor and has the rights to sell it.

@ObsessedGarage

Жыл бұрын

Nope, I pursued Sonic due to their foam inlay and cabinets.

@NSXavier997

Жыл бұрын

@@ObsessedGarage That’s a good reason.

@BigWill3855

Жыл бұрын

@@ObsessedGarage almost everyone has foam inlays. Including Snap-on where you can have them customized.

@ObsessedGarage

Жыл бұрын

The Snap-on inlays are not good. Custom inlays are never as nice. I’ve had quite a few of them.

@mikep660

Жыл бұрын

Agreed. He cant make $$ so he talks shit about it 😂😂 snap on is #1. Where was sonic 100 years ago? 😅

Are sonic products made in China? Just cabinets or tools too?

@ObsessedGarage

Жыл бұрын

A lot of the tools are.

@555fourthstreet8

Жыл бұрын

@@ObsessedGarage oh. Thought you said in the video that these cabinets were made in China too. Maybe I misheard you

@ryanclark8980

Жыл бұрын

Yep, piece of shit Chinese tools that are fine for someone who wants it to look pretty and not use em to wrench more than once a week for a brake job or an oil change.

@ObsessedGarage

Жыл бұрын

@@ryanclark8980 How many have you owned?

@masih9595

4 ай бұрын

​@@ryanclark8980we use sonic in our garage in the netherlands. No problem.

Here to reply to a comment and it’s was deleted…

@ObsessedGarage

Жыл бұрын

I haven't deleted any comments.

Snap-on boxes(owners) are the C4 Corvettes(owners) of the tool cabinet world.

@555fourthstreet8

Жыл бұрын

C4? How did you figure this?

@ObsessedGarage

Жыл бұрын

Yep...

😂😂😂

😂😂😂😂😂

These are the same price as snap on....

@ObsessedGarage

8 ай бұрын

What? They are about 1/3 the price.

@brent245

8 ай бұрын

@@ObsessedGarage 57" wide roller cabinet is $5300+ freight, a 55" snapon is $5800.....no freight from the tool truck. You save a few hundred

@ObsessedGarage

8 ай бұрын

That's for their junk entry level stuff. Epiq is the only acceptable box, and it's $14K.

There are a lot of good boxes and everyone try’s to talk down about snap on. They are hands down the very best and nobody can argue it. A great American made product. The sonic boxes are nice but are not in the class of snap on and not even close. “I’d put a snap on box on the curb” “snap on don’t even make them” You really have no idea what your talking about with this. It discredits your opinion.

@ObsessedGarage

Жыл бұрын

That is complete nonsense. I've spent time with pretty much every tool box. Snap-on would be close to my last choice and cost the most by 2-3 times.

@555fourthstreet8

Жыл бұрын

@@ObsessedGaragewhich model snap on did you own? Disliked it that much?

@ObsessedGarage

Жыл бұрын

@@555fourthstreet8 I had my Craftsman box, and the plan was always to get a giant Snap-On. My life goal was to get the truck to come by my personal garage weekly, so that I could build my box and tool collection. I think it was probably 2012 or 13 when I walked into my first Snap-On truck at Titan Motorsports. I'll never forget the day. They have some smaller tool box arrays holding stuff in the trucks. I opened the drawer with that goofy four finger latch business and proceed to wobble the drawer out. I couldn't believe it. It was like you just told me Santa Claus wasn't real. I thought...maybe it's just the stuff on the truck. Well, one of the Titan techs had a huge box. I had never really thought about the quality. It was simply one of those bias things. I always thought I would have a Snap-on box someday. I then went over to his box and proceed to confirm this nightmare. I thought, "This guy is in debt for the $20,000 array for likely the rest of his career, and this is it? This can't be." I continued to confirm my horror every time I touched one.

Personally i would rather just buy nice tools than spend more than 2 grand on a box..

Yeah Snap-on makes their own boxes and they hold up over time. Snap-on even put a few of their boxes under a Peterbuilt truck and the drawers opened up no problem. Sonic is just for dudes who want to store their tools to look at them periodically or to claim that they are “mechanically inclined. To sum it up: you’re not fooling anyone

Too bad every drawer is the same height.

The fact that you don't have your facts straight on Snap-on not making their own toolboxes only shows you don't know much and that you don't like them that's one thing. But we as in us blue collar people as your potential customers and reading the comments I don't understand your business model you have a good video here but why you had to bring up Snap-on blows my mind. I have bought Tool Grid stuff from you in the past but that's not going to happen again. Have a good day. Yours truly A lost customer

@ObsessedGarage

Жыл бұрын

Sorry man. My intent is not to offend. I have a ton of experience with tool boxes. I've literally flown across the country to get hands on different stuff. This guy does a good job explaining why I was so disappointed with the Epiq I thought I was destined to own. kzread.info/dash/bejne/n2ukysGKgLfAlLw.html

Supporting companies like sonic is why china has become a superpower we pay for them to grow and take over

@Shade_Tree_Mechanic

Жыл бұрын

You know Taiwan isn't a part of China right? I understand that some raw material (might) be supplied from China to Taiwan to produce these but, China is communist and Taiwan is a democracy. Don't get me wrong, I much prefer an American made tool/product but it's very important to point out the differences between those two countries.

@valledecauca1087

Жыл бұрын

@@Shade_Tree_Mechanic😂 you know how fast china can take them over lol china letting them build there wealth they will do same thing Russia's doing buddy

@djsi38t

8 ай бұрын

@@valledecauca1087 If that happens its ww3 you know that right?Taiwan owns computers...USA would have to go to war with China if they invaded Taiwan..

Yeah.... Sorry Matt, But Snap on Makes better Boxes By a large margin... I do not forsee these boxes taking the abuse in the real world of technicians Who put there stuff through hell

@ObsessedGarage

Жыл бұрын

If I was a mechanic, I would have this or a Lista toolbox. I also wouldn’t have an infinite loan with a tool truck guy.

@Itsadougs_life

Жыл бұрын

@@ObsessedGarage I paid 4500$ for my box with hutch 🤨.

@yamfingaz5598

8 ай бұрын

But you are not a mechanic, unless you have been a mechanic (not a service tech or parts changer) then with all due respect you have no idea

@Itsadougs_life

8 ай бұрын

@@yamfingaz5598 been doing it for 10 years

@masih9595

4 ай бұрын

​@@yamfingaz5598What is a parts changer?

STOP. Sonic does not finance. 99% of techs finance their tools and boxes. Sonic is made for the wealthy with expensive toys or dealerships themselves. I just got a 73' Classic series with a hutch and matching cart for 10K from snap on. The equivalent space in sonics systems ONLY comes from the MSS systems and even then they have zero large drawers only modular solutions. YOU CANNOT FINANCE WITH SONIC. Unless you're ready to pull out a personal loan from your bank which a vast majority are not you cannot get Sonic. I've had my s14 since 2017 and I love sonic. Most beautiful well crafted stuff I can find, is it realistic however for 90% of techs. No. If it seems like i'm salty it's because I am. I wanted so bad to be a Sonic guy I really did. I even traveled to the BMW of north America shop just to see the MSS systems before I even though of buying. Legit breaks my heart.

@ObsessedGarage

6 ай бұрын

One should not be financing tools.

So we’ve gone from finding what is actually the best to promoting Taiwanese junk and talking down on what is objectively better. Whatever fills your wallet I guess.

@TheOutty500

Жыл бұрын

Right lol whatever can get my viewers to buy this junk so I can make a buck.

@ObsessedGarage

Жыл бұрын

Ha, ha... If that Snap-on box wasn't $15,000, I'd buy one to compare for you. I'd have to throw it away when I was done with it. No one would buy it afterward.

@TheOutty500

Жыл бұрын

@@ObsessedGarage if you buy a snap on box for 15k I feel bad for you lmao only idiots pay full msrp. I’m 8k in to a 68” epiq with a hutch and a locker. The locker alone could fit more shit than the biggest box you showed us.

@ObsessedGarage

Жыл бұрын

This is the classic example I’m always talking about where people attach their self worth to an object they bought.

Snap on makes their own boxes, if you're going to try and push your free crap box and talk down on American made stuff at least get your facts correct. I'll put my snap on box up against your box. They can't even hold the same weight as a snap on box. Those cheap boxes don't compare to American made

@DesertGn0me

Жыл бұрын

If Made in USA was number one priority it would be Lista, Snap-on is not worth it as far as boxes. They are upcharging obscene money for their boxes in particular. unless you need the clout in your shop of owning a truck brand or plan on thrashing it and trading it in every so often. Good utilitarian toolboxes but msrp is 4x to high for what you get. If you're coming from outside the OG community, Obsessed Garage isn't really appealing to the professional shop mechanic or oil rig pipe fitter.

@thegamer570

Жыл бұрын

Matt smokes a lot crack

@ObsessedGarage

Жыл бұрын

The fit and finish of the Taiwan stuff is far superior to the $30,000 Lista array I just got. For example, I can pre-order a countertop, and it will fit exactly on a 20' Sonic array. I did the same thing with CAD file dimension of Lista and my countertop was over 1/2" short. Lista also has drips, wonky welds, and lean powdercoating spots. Now...I really like the Lista due to Austrian glides and drawer organization options, but I've seen them all. These Sonic boxes are my favorite. That's why I sell them. American made has a lack of precision that the German and Taiwan made stuff has.

@DesertGn0me

Жыл бұрын

@@ObsessedGarage Agreed, I like the clinical function of the Listas, Reminds me of being in a lab. However the fit and finish is not up to Sonic levels, at least the higher end Sonics.

You’re a KZreadr and a salesman for sonic, not a technician. Stay in your lane

Made in USA boxes out of steel, and an Epiq doesn’t have latches like that. Maybe educate yourself on the products before you talk shit on them 😂🤡

@ObsessedGarage

Жыл бұрын

Have you ever seen these in person? I have. The latch on Snap-on drawers is one of the parts that makes it not good.

@ryanclark8980

Жыл бұрын

@@ObsessedGarage a guy at a shop I was at had one, and I’ve looked at them every year they’ve been at SEMA, and a close family friend has one in his personal garage.

I hope you get sued by snap on for the lies you are trying to spread.

@ObsessedGarage

Жыл бұрын

Ha, ha... They know I'm right.

@justforkiks29

Жыл бұрын

@Obsessed Garage No, you're actually spreading lies. There is no aluminum in snap on boxes, and they are the industry leader in tool boxes. Your little box you seem to like is the same price point as a full-size snap on cart. No one pays list price for boxes. The only reason you are pushing your Taiwanese tool boxes is because you get a piece of the sale. Snap on tool boxes are USA made in algona Iowa with USA steel.