Impeccable shaftsmanship at the end there, solid 10/10. The video was pretty good too.

@andrew20146

Жыл бұрын

Convergent evolution.

@chrisward978

Жыл бұрын

'shaftsmanship'. Colour me impressed with your phallic terminology.

@alkestos

Жыл бұрын

I wasn't sure if I was gonna sub to this channel before, but seeing that in the end, there was no question anymore. Every good video has at least one badly 'disguised' knob in it. 10/10

@ianbuilds7712

Жыл бұрын

@@alkestos it might be because I'm in America and I don't hear it much but I think knob is my favourite slang wourd for a phallus... 🤣...

@ianbuilds7712

Жыл бұрын

The faster, harder and longer you want to ram through the air or any fluid the closer you get to the most efficient ramming shape there is...

My neighbour is nearing 90 years old, he's an aero engineer who has consulted extensively since his retirement in his mid 70s. He's sharp as a tack and still gets calls from DoD colleagues when they are stuck. I was stunned when he told me about some of his colleagues in the 1950s joking about their previous work... "Ze guidance has to be so accurate now, my last boss vas happy as long as ve hit London"

@thedude4795

Жыл бұрын

"my last boss" lol and theyre german, hilarious was his name Dr Strangelove?

@CanadaJarod

Жыл бұрын

@@thedude4795 en.m.wikipedia.org/wiki/Operation_Paperclip#:~:text=Operation%20Paperclip%20was%20a%20secret,Europe%2C%20between%201945%20and%201959.

@NEprimo

Жыл бұрын

what an awesome story lol, was it actually von braun or just another of the german minds we stole?

@111elf1

Жыл бұрын

since it was (as i recall) more than 80 german and austrian high profile scientists and engineers back then, probably. Von Braun died in the 70s as i remember 😅 And we just start building inflatable space stations. He would be so bored.

@warrantyvoid100

Жыл бұрын

@@NEprimo He never met Von Braun as far as I know

About 20yrs ago I cut up 200 ft of 1/4 clear vinyl tubing and ran it from inside my 66 Belvedere hardtop to points all over the body. Base of the windshield, grill, fenderwells, area behind rear window, and like that. Then I had my buddy Sam drive me around on I-81 at 80mph while I hooked up each tube to a furnace exhaust stack vacuum gauge and wrote all the results down. My plan was to figure out where the high and low pressure areas were so I could see if there was any way to duct the high pressure air to the low pressure areas to reduce drag or make it rain behind the car or something. The only thing the experiment indicated might be helpful was to remove all the glass from the car. I still have the notebook with all my "data" and handrawn outlines of a mid60s Mopar intermediate. I think writing this comment is the first time I've gotten any benefit(?) from all that "research". Thanks. All hail

@SuperfastMatt

Жыл бұрын

Very cool guerrilla engineering.

@jonathangehman4005

Жыл бұрын

After watching the video again and thinking about my experiment with the tubing and furnace draft gauge I remember thinking that if I placed a duct from the high pressure area inside the rear wheelwells(a partially skirted design on my Belvedere not entirely unlike on your Jagla) that exited in the low pressure area at the base of the rear window(again, not unlike your British pile) I might see a usefull decrease in drag. I don't know if there's room in the "trunk" of your Jag to run some 6" flexihose from inside the rear fenders to some lovingly crafted gaping slots at the bottom of the window but there might be an increase in range to be had if those areas have similar static pressure relationships as my old Plymouth. I think you should try it since the Belvedere I have now is too nice to take a sawzall to unless someone else has some success hacking thier car car first. Please advise me of any results from testing you may do. Again, all hail

@GrantOakes

Жыл бұрын

I thought you might have said the only thing the experiment indicated might be helpful was to slow down to 55 in order to avoid all those speeding tickets!

@jonathangehman4005

Жыл бұрын

@@GrantOakes HA! Driving since 1981, 3 speeding tickets, none in a hotrod or other fast car, none since my 40th birthday in 2004. I'm very carefull and very lucky apparantly. That Belvedere could eventually pull .89g, 13sec. 1/4s and 19mpg with a 440(just not at the same time)

@GrantOakes

Жыл бұрын

@@jonathangehman4005 I had a 64 Belvedere with a 426 wedge, 3.91 gears and could pull 6" wheelies. That was perhaps the fastest car I ever owned.

Just discovered this guy and he's the first KZread car guy I've seen caveat literally every idea for car aerodynamics. When he introduced who NACA was instead of just saying a NACA duct sucks in air, I knew he's the real deal.

I'm wholly impressed by how you wrapped up a very serious dissertation on aerodynamics with a dick joke.

@craigleemehan

Жыл бұрын

Thanks, I was worried it was just my sick mind.

@christophernoto

Жыл бұрын

@@craigleemehan That, too, of course. But who's counting?

@calholli

Жыл бұрын

You're new here aren't you..

@danielclaudio5764

Жыл бұрын

@calholli who cares

@calholli

Жыл бұрын

@@danielclaudio5764 He does dick jokes all the time--- that was my point. Thanks for caring.

Everyone always asks if I ever took an aerodynamics class in engineering school. Of course I tell them I did, but the class was not whatever they imagine aerodynamics to be. It is a dark art, with understanding inversely proportional to knowledge.

@hardwire666too

Жыл бұрын

Good to know! My dumb a$$ would have shown up with a calculator and not a goat for sacrifice. lol

@rubenlucescu5651

Жыл бұрын

As a senior engineer of a wind tunnel for a major automotive OEM, I can confirm. Since I've been doing this job for 11 years, I'm regularly labeled "aerodynamicist" which is a term I hate. It implies that I know something about aero, but most of my job consists of me saying, "who knows? Let's just test it to find out."

@erple2

Жыл бұрын

I did take aerodynamics in engineering school. It's remarkable how much of the earlier course work focuses on "these are the general ways that these idealized perfect shapes act in a perfect airflow that has no entropy or flow separation". The later course work is focused on "And this is a simplified view of how the real world makes all of that stuff weird and not as usable as we led you to believe". Even worked for a brief spell at a wind tunnel, where it turns out that even the advanced coursework's simplified real world stuff we learned was only a little bit helpful, especially as you get further from idealized conditions.

@davidegaruti2582

Жыл бұрын

Thank you , as an armchair aereodynamicist who just enjoys learning about aircrafts i was always stunned when things i learned where contradicted later on , So ye , i should probably get a real hobby

@DrunkenSwimmer

Жыл бұрын

It's good to know that all fields of engineering have "that one branch" which is all a black art; I still recall when I first started to understand how RF circuits worked in theory and went "Aha!" and then realized that actually building them was a completely different thing...

I enjoyed the longer video immensely but I have this weird feeling that I actually learned something. I'm sure it will pass.

I burst out laughting everytime you showed Kermit flailing his arms around to display turbulent flow. This is one of the best, most visual descriptions I've head and I'm going to use it from now on!

I'm beginning to think every car Matt works on needs to have a hidden phallus somewhere.

@josephssen

Жыл бұрын

'Hidden'

@Maxzillian

Жыл бұрын

@@josephssen Well, the dry sump tank phalli in the Honda are pretty effectively hidden.

@jsquared1013

Жыл бұрын

One could argue that the LSR car itself is one giant phallus 😆

17:00 if you're in the UK the custom is to attach a small bell at the front to get a sense for how much the air is flowing, this also helps you remember which end is the front. It's the bellend.

@meatcreap

Жыл бұрын

Very cool - I didn't know that!

@alfonsoalonzo

Жыл бұрын

@@meatcreap wooosh

@theleva7

Жыл бұрын

They say some people are innately qualified to be employed as the measuring device instead of the bell. Unfortunately for them, it seems to coincide with having not exactly stellar character traits.

@__Razer

Жыл бұрын

I have a bell on my motorcycle but it's to ward off road gremlins, nothing to do with aero.

@alfonsoalonzo

Жыл бұрын

@@__Razer this is a joke bellend is a insult

The Dodge Charger Daytona and Plymouth Superbird, Chrysler's NASCAR homologation efforts around 1970 used textured vinyl on their roofs. This served two purposes, first the rough texture did have a "golf ball" effect which helped stabilize a shape that was never designed to go 200 MPH. And second and perhaps more importantly, it covered the slapdash bodywork done to the 2500 street versions they had to try to sell. NASCAR banned vinyl tops for 1971.

Probably one of those things that is significantly different between hydrodynamics and aerodynamics, but one of the things we have found in racing sailboats is that a slick, glossy hull surface is often slightly less performant than a sanded, matte surface. Something about the roughened finish wetting, making the dominant interaction be water on water instead of water on fibreglass. The Olympic Soling class used this to great advantage; you could tell pretty quickly who sanded their hulls and who polished them. The sanded hulls were usually a boatlength or two ahead consistently.

@TravisFabel

Жыл бұрын

Surface tension in hydrodynamics is very different than the surface tension in aerodynamics... Well, different probably isn't the right word but the forces are vastly different in strength.

@georgerobartes2008

Жыл бұрын

The same interaction between hull and water is interesting in that the object is to reduce the wetted area of the hull to reduce friction . On powerboats air is ducted in from the chines located at the steps to induce a carpet of bubbles that the wetted surface is in contact with . On sail boats where regs do not permit such devices , the introduction of a rough surface creates microbubbles of air which unstick the wetted area . On WLSRs you are actually trying to make the boat fly but keep contact with the water . Compared to air ,water is a high viscosity fluid which causes plenty drag . Renato "Sonny" Levi was the first to recognise this creating the Levi Delta common in most planing hulls sometimes combined with a conical form to create the ' conical delta' hulls . In an inlet port with a mixture of fuel and air a polished finish produces poorer flow and less bhp than a port finished with 60 grit cones to maintain good turbulence by mini vortices and attachment to port walls . Its good to polish the exhaust as a) the exhaust gas is forced out and b) it delays build up of fouling .

@brianb-p6586

Жыл бұрын

Although the fluid difference is very significant, the same effect does occur in air. I think it is worth examining whether laminar or turbulent flow is idea for different areas of the body.

@quartfeira

Жыл бұрын

That's the reason why you don't polish the intake/s of your engine.

@recoilrob324

Жыл бұрын

Comparing water and air is closer than it would appear when the velocities are high. Air gets VERY hard to push through and if you start to apply serious power to something it's going to heat up. Wonder if a pressurized boundary layer type skin wouldn't help with the friction losses. Maybe only need the pressurized (or even suction) panels here and there to really clean up the profile.

Engineering humour is rarest humour . . . . next to accounting humour. Also, drag is caused by exposure to feather boas, sequins and stage makeup.

@jimiverson3085

Жыл бұрын

Economist humor might be rarer....until you know that most of the field is performance art.

@jj4791

6 ай бұрын

@@jimiverson3085 Economics is really just Philosophy vs Religion.

The transition from aerodynamics to bio mechanics is incrementally subtle.

I’ve watched probably 100+ aero videos, and this is hands-down my favorite, ever. Thank you for that.

So glad we never have to experience childish humour on this channel. Cheers mate. 🍻😁👍

@calholli

Жыл бұрын

Yeah.. only adult humor.

@ThunderAppeal

Жыл бұрын

I dont know. The is a well educated idiot, painfully boring to listen to. But that would be your wavelength.

@uvwuvw-ol3fg

Жыл бұрын

@@calholli Wasn't the concept of adulthood as we understand in current culture just a social construct?

@jamessovea4993

Жыл бұрын

Hell yeah, dad jokes all the way 😂

Your intro regarding confidence in aerodynamics applies to just about anything complicated: Cyber security, data analytics, AI, environmental science, etc. I find that entertaining

@janniksims5740

Жыл бұрын

It's like having your highschool diploma and you feel like you know how everything works. Then college happens and every day you learn something new, you start to understand how little you actually know.

@brianb-p6586

Жыл бұрын

Yes, but it is particularly applicable where the field is real, not artificially defined. We don't fully understand how the real world (including aerodynamics) works, but we created cyber security, so it is fundamentally more understandable to us.

@jayinmi3706

Жыл бұрын

In retail, we call it under-promise and over-deliver. lol

@CED99

Жыл бұрын

AI is easy, all you have to do is programme something vastly more intelligent than you, that understands what you want it to do implicitly, and is aware of all the moral/social/financial constraints that you find relevant and wish it to adhere to... Simple, what could possibly go wrong?

@nasonguy

Жыл бұрын

You say that with a high level of confidence….

First off, maaannnn, Matt: I always absolutely love your deadpan humor and delivery. It gets me everytime. Second: All of this footage of Bonneville makes me sad. I moved to SLC for 2.5 years, but both years I lived there, the salt flats were too wet to run (and I had to leave before the third one ran) so I never got to go. Still though, I love getting this insight. Thank you!

After reading up on theory and (tested) examples on an ecomodding website, I made some aero mods to my 2005 Accord to reduce its drag (for fuel efficiency reasons, not speed). I did A-B-A-B testing during relatively stable weather. Runs in both directions, straight level road, no traffic, using cruise control with the car left on for consistent speed. Short airdam w/ curved lip connected to a partial undertray under the engine bay, partial grille block, side mirrors folded back. Could add/remove all at the side of the road with simple tools. Got ~4.25% fuel efficiency improvement at 55mph. Pretty happy with that.

That diagram at the end made my Monday, thanks Matt 🤣🤣

@calholli

Жыл бұрын

Are you watching this from the future?

I fucking love this channel! From beginning to thankful ending. It's always just the best from Matt.

This feels like it addressed everything I ever cared to know about aerodynamics minus all the math. great video!

@AlexanderBurgers

Жыл бұрын

beyond simple geometric shapes, the math quickly devolves into "well, let's have a computer handle this part", but you gotta know what you're doing, otherwise it's going to always be 'garbage in, garbage out'

@calholli

Жыл бұрын

That's like learning everything there is to know about a woman without touching her.

@kwik01

Жыл бұрын

@@calholli For some women, I think thats preferable.

@blackfrost273industries4

Жыл бұрын

What about internal aerodynamics?

@Elrog3

Жыл бұрын

But he didn't even touch on what happens when you approach and surpass the speed of sound. Don't tell me that doesn't make you curious.

A belly tank racer with a small hole for a ram air scoop explained it to me like this: He calculated the volume/mass of air going into his intake hole as a cylinder of air extending from the start line to the finish line. He calculated the diameter of the intake hole based on that. At 200mph, the hole was slightly larger than a quarter.

Your drawing shows that nature knows the answer to everything.

@nasonguy

Жыл бұрын

It’s the fastest shape. Mine can go from 0 to 100 back to 0 in just a few seconds.

@calholli

Жыл бұрын

Size does matter in aerodynamics.

@HypnosisBear

Жыл бұрын

@@calholli Size always matters, my friend.

Tamper throwing toddler takes tons of torque! Totally true! :D

Thanks for not conflating fast with quick. Traditionally of course, you just made your vehicle light, and put the most powerful possible engine in it. Aerodynamics was what you had to resort to when your car wasn't fast enough!

I am a huge fan of your channel, I just want to leave you some love. Thanks for making your videos incredibly entertaining and educational. It’s like a perfect balance with pacing and your presentation style is really fun. I really appreciate your work!

I love your content, you’re one of the only content creators I have the bell on for.

@groundcontrolgainesville4841

Жыл бұрын

Same

@someoneelse2106

Жыл бұрын

That's me too. This guy is intelligent but not outwardly full of himself. He knows that he doesn't know everything and so keeps an open mind about new info. He takes that info and tests it, not just explaining a gut feeling.

@ukaszmalczewski6807

Жыл бұрын

Me top, great humour

@frankblom8546

Жыл бұрын

Same!

I'm glad that i found your channel, i'm learning more about understanding things in general on the point where my default answer changed from "yes/no" to "Maybe, idk really, oh might aswell try ". Thank you 😂

My best example for how unsure we are about aerodynamics is that some guy put a spoiler on and started getting better mileage. People were saying he was an idiot, probably had tail wind or some other thing was causing it because spoiler causes drag. Nowadays, we know very well spoilers can be used to reduce drag but it still does depend on the car, a speed record car probably won't benefit.

The tire thing hit me hard. I went from 18x8 tires to 19x10.5/11 staggered on my mustang and my mpgs on trips from California to Texas went from 30.9 to 27.5 at 71mph

@5thearth

Жыл бұрын

Part of the issue is you're not just adding aero drag, you're almost certainly adding weight, and adding it as rotating mass. If your wheels weigh an extra 10 pounds, you're literally adding a 10 pound flywheel you have to spin up every time you accelerate.

@B0RN2RACE100

Жыл бұрын

@@5thearth I was maintaining a constant speed 95% of the trips, I would say the weight added to it, but it wasn’t from accelerating, just the added rotating mass sucked up some power, but the big rollers under the car definitely made a aero difference too. It went from 245mm with to 305mm in the back

i see Matt, i click. i am a simple schnitzl.

@k20nutz

Жыл бұрын

Didn't even read the title before clicking, I have time to do that while the ads play

Absolutely enjoy your channel and content. Thank you so much for sharing.

I stuck for whole day on your videos! I love your sense of humor! Thanks for sharing all your incredible projects!

This is my favorite KZread channel, every time I see a post I watch the whole thing right away, great stuff 👌👌

This is pretty much the extent I remember from my one aerodynamics lesson at university 15 years ago. Now my 6 year old son is into drawing cars and keeps asking if this and that are aerodynamic, and I can only answer "yes, but not how you think." I'll have to show him this vid to confuse even more.

@calholli

Жыл бұрын

Nice prank bro.. it's only his future we're talking about

@blackfrost273industries4

Жыл бұрын

I love you. J.s. such complexity to enjoy there.

Tip for the Jag Add one of those luggage racks that you see on similar old cars , position it so that the top rail can hold what will effectively be a spoiler that will duct the air in the direction you want. You could just fit a spoiler but it would look out of place . A trick with aerodynamics is to get the turbulence that would normally cause drag to work for you by deliberately making in happen where it can do something useful like feed the engine or cause a low pressure area under the vehicle. The down force that causes the least drag is obtained by creating a low pressure area under the vehicle.

@Jonathan_Doe_

Жыл бұрын

I think something at the back of the roof made to look like one of those old sunshades people would fit above windscreens could work.

@anomamos9095

Жыл бұрын

@@Jonathan_Doe_ . Possibly better than my idea but far more obvious and probably a lot uglier in the execution.

@XenonJohnD

Жыл бұрын

@@Jonathan_Doe_ Why am I now thinking about the Ford Sierra Cosworth. That I recall had a subtle extension at the back of the roof.

@Jonathan_Doe_

Жыл бұрын

@@XenonJohnD Very subtle, and it also doubled as a handy ironing board.

All hail the algorithm. John Britten ducted high pressure air from the front of his bike to the radiator under the seat for the max DP that he could get and he successfully used a radiator half the size that everyone else was. The drag reduction was impressive. I highly recommend reading what you can about his engineering methods. Also I highly recommend reading "Doing More With Less" by Paul Ciotti for the same reasons. Edit: The title of the book is actually "More with less: Paul MacCready and the Dream of Efficient Flight" ( ISBN-10:‎ 1893554902 )

@farnarkleboy

Жыл бұрын

I tried searching for "Doing More With Less" by Paul Ciot, but can't find anything . Do you have an ISDN for it or a publisher ?

@g.a.ravindujayanga8958

Жыл бұрын

@@farnarkleboy it is 'More With Less'

@p.t.anderson1593

Жыл бұрын

@@farnarkleboy My apologies, I tried a couple of times to reply to your comment but they were getting removed. I edited my original post. Maybe this will work.

@farnarkleboy

Жыл бұрын

@@p.t.anderson1593 Thanks , got it , much appreciated

I love your signature at the end. Subscribed. All hail algorithm!

Awesome! Loved everything about this clip. Keep rockin’!

I love the baby and the panicked Kermit the Frog for unhappy airflow! (Former Aerodynamics Engineer here) I also love the MythBusters reference!

Your channel has the unique effect that even for the subjects that I'm not sure how much interest I have at the beginning, I always end up watching all of your videos through to the end, and I'm glad that I did. Feeling informed, with a smile. I know that I may be kidding myself, as I will probably forget most of the facts (and all of the numbers) in less than a day. But that's OK, because it is entertaining. 🧐😊

I was thinking about dimples and myth busters the whole episode! It was satisfying to see it at the end. Excellent as always!

Your channel is an amazing discovery! Thanks, algo. Subbed.

I was thinking about the golf ball aerodynamics all along the video. Never saw the Mythbuster episode but I saw a research video on golf ball aerodynamics that compared even dimples vs random size and distribution of dimples. Very happy that you saw the question coming.

you'll love this story: My engineering teacher in flight school was once a part of a team designing a new kind of wing. it had a dip or groove of some kind in the middle of the beam that produced a laminar bubble. it would have let planes fly with much less drag. only one problem, which apparently took them years to find out. when it gets wet it stops working. and sometimes in real life, water falls from the sky.

@LiveType

Жыл бұрын

I remember a high school co2 car competition over 20m where someone by accident designed something like this. It was very much not aerodynamic, like you would look at it and go, yep, not aerodynamic. It was super boxy, rough, full of random pits, protrusions, etc... part of the "aesthetic". However, at high speed all of that stuff introduced a bubble that dramatically, and I mean dramatically reduced drag. It was shocking. The thing would always, and I mean always win. By several car lengths most of the time. Making a design like was suggested in the video couldn't beat it. Beating it took replicating the design and then smoothing as much stuff out as you could without disturbing that bubble. Only then would that car get beaten, though not by much. Aerodynamics is quite complicated for sure. You change something which should work according to the principle behind it only for it to create MORE drag.

@5thearth

Жыл бұрын

Sounds like a Klein-Fogelman airfoil.

This is an all time great video. Fantastic information, well laid out, with one of the best outro cards I’ve ever seen 😂

love this channel, thanks for the content/knowledge/humor

You are seriously gifted for presenting complicated concepts, understandably while entertaining.

ha ha at the end there you made me spit out my coffee , great stuff thank you for making incredibly complex stuff understandable on a sunday morning

About NACA ducts: they are only made for high-throughput airflow, NOT for static pressurization as is what you want for a ram air for the intake of jet or other engine. They work well for that for which they were designed, and static pressure is NOT it. If you need static pressure, you use a scoop or other forward-facing inlet that is preferably located in clean air, such as the front of the car or a scoop well above the boundary layer.

This is the first video i have watched from this channel and I'm already in live with it, damm your production quality is great

I'm really interested to see your real-world ram air test results! Great video, thank you.

@tinolino58

Жыл бұрын

Ram air doesn’t work. High speed air has no pressure and it doesnt feed any engine or cooling system well. Ram air looks cool. Thats all!

@jsquared1013

Жыл бұрын

@@tinolino58 tell that to F1 teams during the NA era. You have to shape the internal volume properly, but you can get more mass into the engine with it done properly. But they have much different drag/downforce priorities, so what remains to be seen is if the drag tradeoff is worth it on an LSR car.

@tinolino58

Жыл бұрын

@@jsquared1013 in airplanes we build a difusor to regsin airpresure and slow down turbulence

Gotta say... I don't know that I'd fully discount the aero work that was done 50 years ago. After all, they did produce the SR-71 and other extraordinary aircraft using that same imperical methodology.

@MogR91

Жыл бұрын

when modern data and simulation discount it tho... maybe it's time to move on ;)

@Jazz3006

Жыл бұрын

@@MogR91 sure, once it's proven and published.

@calholli

Жыл бұрын

The Russians had the Mig-25.. turns out brute force has a seat at the table.

@383mazda

Жыл бұрын

@@calholli lol, good point. The flip side of the "reduce drag" coin is moar powah!

@calholli

Жыл бұрын

@@383mazda It's true--- but that's only true to a point though, because that battle becomes exponential; after a certain speed, it takes twice the power just to go 2% faster, and then twice the power again, just to go 1% faster. At certain speeds, drag bursts you into flames-- think of a meteor coming into the atmosphere at 39k MPH. Drag ultimately wins the battle against power increase. lol..

I could endlessly watch videos just like this one. I look forward to more like this. Especially the ones that educate people on how *little* they actually know.

İ was just thinking yesterday about when you would have a new video and there you go !

🤣 Thanks for going over shapes and dimples. Very great content here. Aerodynamics are definitely complicated and very interesting!

Yay ! Welcome back !

Very informational and I appreciate it and I had a good chuckle at your last diagram

This is brilliant!! What a great creator.

When using ram air induction remember to tune your engine to handle that extra air to get any benefit. You could also use a tool to monitor your engines computer (if it has one) and watch your manifold pressure to see if that goes up at speed to see if it’s working.

@k20nutz

Жыл бұрын

A gm mass airflow sensor could do both of those things.

@pchris

Жыл бұрын

@@k20nutz assuming the engine doesn’t already have one of its own

@Ritefita

Жыл бұрын

lol. let's invent EFI

@pchris

Жыл бұрын

@@Ritefita the engine may already have efi. I don’t know what he’s using other than that it’s a Honda motor bike engine

@Ritefita

Жыл бұрын

@@pchris I'm sorry if I'm rude. This is the simplest question of all. - any modern engine has basic sensor that solves everything you worried (older measured pressure, now - mass or booth). - any old engine solves everything by having carburator. - any racer modifies the firmware. so it's too basic to talk about))) btw, Matt modified Tesla

That closing image was epically hilarious

Aaaaaaand the ending got a subscribe from me. Great stuff, Matt, looking forward to more!

So much valuable insight in this. Thank you!

There's a channel where the host takes 3d print designs from viewers and turns them into PC case cooling fans to see who can make the best. Someone did the golf ball dimple thing in the logic that it'd increase the airflow through the fan, but in the end all it seemed to do was disturb the air more than create better flow. My thought at the time was even if it did work the way Mythbusters _suggested_ it might, it'd just be disturbing the air as it spun or creating pockets of turbulence rather than pulling it through the fan blades. But I'm no rocket surgeon.

@k20nutz

Жыл бұрын

Oh yeah, the fan showdown is a fantastic show!

About the engine intake from the front : (a) some race teams tape over eg cooling ducts for qualifying laps because this reduces drag. I vaguely recall someone saying because it reduces effective wetted area, orthogonal to any change in airflow over the rest on the car (b) in a previous video you mentioned you thought there would be a be a gain despite the losses from the pipe back to the engine by just letting the inlet pressurise the entire inside of the car removing the need for the duct would have less losses. But viewed another way a much higher wetter area but much lower flow rate. So who knows. But it will cool the driver a bit and help fan the flames backwards if the engine catches fire. Testing. The opposite if the same question .. where will you dump the exhaust, out the side, top bottom or at the back ?

@SuperfastMatt

Жыл бұрын

It would be different from a cooling duct because the engine would be actively pumping air, rather than adding restriction like a heat exchanger. I’ll have the exhaust going out the back.

@firefighter4443

Жыл бұрын

While pressurized cabin would possibly ‘fan’ the flames rearward, adding oxygen via fresh air source will make any open flame hotter and more destructive.

@MogR91

Жыл бұрын

@@SuperfastMatt So you'll purposfully make the opening small enough so the air is sucked faster than it's ramed? you don't want any reverse flow there i'd asume... also the engine intake will create pressure waves possibly screwing it all up... argh too many variables, just test it and tell us thanks :D

@AlienLivesMatter

Жыл бұрын

@@SuperfastMatt why not duct the high pressure nose directly to the tail? Or feed it into an airpump driven off driveline PTO? All clean air of course. Exhaust is best thrusting out the rear

@ChrisBLong

Жыл бұрын

@@SuperfastMatt There are papers suggesting that using the exhaust for slot-blowing might usefully reduce skin drag... is that type of thing allowed on your car? Formula 1 had those blown diffusers for a while that relied on a similar idea. Awesome videos, thanks!

love how informative your videos are!

Amazing video all round, explanations, jokes, points made... liked it all

"Matt hasn't uploaded in a while" Google knows.

Great video 👍 So would a shark skin texture finish on a vehicle be a good aerodynamic choice in regards to laminar flow ?

@AndrewVerran

Жыл бұрын

I've always wondered this too.

@sexyfacenation

Жыл бұрын

You ever seen a racing shark?

@noname-sd5dt

Жыл бұрын

@@sexyfacenation those are the ones with the stripes down the middle

This is my first video of yours. All hail the algorithm. I just hope the rest of what you have is as good. Please keep up the great work

I just found your channel. Amazing content. Educational and Entertaining. You actually explain the science in the most understandable way. and I respect that you also do your own wrenching. Cheers!

I designed a vehicle as per your specifications at @17:08, great design! However, I was cleaning it with a fine shammy the other day and all the sudden it started to leak turn signal fluid out of the front nosecone. Then it wouldn't start at all for like 30 minutes afterwards! Do you have any advice?

@raypitts4880

Жыл бұрын

was it crying

The more you know the less you know... Ahh classic Dunning Kruger effect 🤗 Algorithm 🙋‍♂️!

Stimulating convo... It all came together with that brilliant drawing at the end; nice finish.

ty for the upload n_n Always enjoy your videos. Wish there was more :D

So, on your final shape drawing, do you think that shape is optimal when discussing the subject of water as well? What if it rains?

@sumduma55

Жыл бұрын

That's why he has the valves. He doesn't need to ram it when it is really wet. And yes, I picked up on that too.

@TheMisterpino

Жыл бұрын

I think temperature is more of an influence to the shape of the object than moisture

@Rainstalker

Жыл бұрын

I made a car like this and it keeps being floppy or changes sizes. Good aerodynamics 1/10 comfort

A month later... 💀💀💀

The last sketch was my favorite. Summed it all up nicely i think.

Love the final design 😆 Thank you!

The wildest thing I learned about aerodynamics in the past year-ish is how unbelievably UN-aerodynamic motorcycles are. To a fucking bike, they're all worse than a full size truck from the 80's. This is why my KLR, while it had a favorable power/weight ratio for around-town hooliganery, flat out could not pass a car at 70 MPH.

@craigwiess1656

Жыл бұрын

Yet a1984 GL1200 Goldwing with fairing trunk and saddle bags can do 115mph. The three extra cylinders help. HP torque and gearing help

@Hansengineering

Жыл бұрын

@@craigwiess1656 Yes. The take-away is motorcycles have seemingly absurd power/weight ratios because they need them.

@dnlvrl8832

Жыл бұрын

Motorcycle aero design is a pain in the ass, the wheels are proportionatly much bigger and rotating whels are hard to analyse, you have to acount for the position of the rider and lugage and you need someting that's much more stable than a car (undesrtandig instabilitys and variable flow direction as in a curve is realy dificult). I think that that'sthe reason they intruduced aero devices in moto gp just recently

@craigwiess1656

Жыл бұрын

@@dnlvrl8832 on my Goldwing there is a big difference just from taking the trunk off. Over 80mph with the trunk on you can feel the turbulence. At 115 it's scary. Without the trunk it's more stable and can hit 120mph. Found a shorter than stock windscreen, about 4 inches, makes a difference if you tuck in behind it at higher speeds.

Recent subscriber here. Loving this content. It tickles my brain.

Thanks for explaining the golf ball dimple thing. That helped.

Damn I look forward to these videos so much. I'm never disappointed.

The end drawing is great. Fun seeing the strongest shape.

Just came across your channel this morning, and wow! I really like your subject matter and how you present it.Interesting, different than the typical regurgitator, and very much a pleasant surprise (especially your venture into flooded Death Valley.)

Super interesting, thanks for the brief!

Love your work 👍

amazing illustration at the end.

Looong aerodynamic shape at the end.. lol. Cheers from Brazil!

I really enjoy your delivery.

As hydro and aerodynamic engineer at marine industry, I could not agree more with you. Salesmen and managers keep demanding answers to issues that I just cannot give at conference room. "Why can't you promise that we'll have perfect wind shelter in the back seat of bow rider..." when the boat can move anything between 20 to 50 mph, can have wind from any direction, can have a trim of 1 to 4 degrees, people sitting there may be anything from 4 to 6 ft... Like open top vehicles' turbulent airflow was easy to manage even before.

Can't tell you how happy I was to see that you had posted a new video.

love to watch you videos ...one thing do ....THE JAG LOOKS SOOOOOO F GLORIOUS :))) love the shape and the presence

Thanks for summing up with the illustration at 17:11, nature is actually good at reducing drag

This was so much fun, so much useful information and a great sense of humor

I enjoyed this clip a lot! I am a crew member for the BUB 7 motorcycle streamliner. The shape of the streamliner almost directly mirrors that of a Coho Salmon. When tested at the W2 wind tunnel in N. Carolina it was found to have Drag Coefficient of .08. This motorcycle once held the FIM World record with a two-way average speed of 367.382 . We are gearing up to go to the Bonneville Motorcycle Speed Trials on August 27th -Sept1st 2022. We will be testing a newly built Monocoque body as well as new rider Trev Richter. New subscriber and looking forward to more great content!

I met a fighter pilot a few years ago and he said going through school to be able to fly his jet and I quote from the pilot “I learned enough aerodynamics to be dangerous” 🤣

@jj4791

6 ай бұрын

Aerodynamics for pilots involves pretty much one thing: Angle of attack x velocity = lift. But there is a maximum angle you can utilize.

Best intro monologue i have ever heard!

Awesome work mate