Love this mustang already 😂 can’t wait for the next upload 💪🏽

@AutoExec1

Жыл бұрын

Man this car has alot in store. I'm already looking for a saleen supercharger. Thanks for watching.

I’ve had an x pipe and h pipe. I love them both. They both can make a car sound really good in their own way. Looking forward to seeing the process of this build I’m following👍🏻

@AutoExec1

Жыл бұрын

I definitely agree with that. And there's alot in store for this car, thanks for watching.

@asapjackie4975

Жыл бұрын

@@AutoExec1 I’ve got a 2000 gt and it’s basically a full bolt on. Only thing I’m missing is long tube headers but that’s coming soon and a set of 3.73s. Definitely a good platform to have as a project car

@jayski941

6 ай бұрын

@@asapjackie4975is your steering on the car kinda stiff? I checked out a 2001 auto gt I wanted to get and the steering was stiff

Love the videos man! Keep it up

@AutoExec1

Жыл бұрын

Thank you. I definitely will, there's alot to come.

Keep coming with the videos 🎯

@AutoExec1

Жыл бұрын

I definitely will, thanks for watching.

Great mustang you found, and doing what your doing is great. Real difference between the h and x pipes are the x pipe gives you a bit more power over the h, yet its all in the engine's health. The x is definitely louder, and like most they believe its extra power..a built engine and some mods the x will out perform the h every day of the week. I have known all types of speed freaks from race shops to do it yourselfers in their garage, and each has their own taste. My era is the original 5.0 foxbody, and I have helped build many of those in my life. U live this generation Mustang also, not a real fan of the 4.6..they are good engines. Foxbody and original 40s were so common in the 80's and 90's..original 40's sound good on the 4.6, for a true sound on these engines the super 44 is the best. Install a pair of these and keep the x pipe..it will sound almost like the h pipe..but better.

@AutoExec1

Жыл бұрын

Thank you I appreciate that, I've heard the X pipe gives more power that's one of the reasons I went with the X pipe. Man I love Fox bodies. I knew a guy in high-school that had an 88 fox with that exact exhaust (flomaster 40s with the O/R H) it sounded good. He was beating guys with the 90's trans ams with the LT4. I may have to go with 44s then. Cause that H sounded good.

excited to see the progress on the build/restoration!

@AutoExec1

Жыл бұрын

I have so many big plans for this car.

@CoyoteDAworld

Жыл бұрын

@@AutoExec1says every dude that gets his hands on a side car

@AutoExec1

Жыл бұрын

@@CoyoteDAworld oh this is no side car, It's the main car!

@zodifyy7971

Жыл бұрын

@@AutoExec1 im glad to be apart of the process!

ive had both an X and an H with longtubes and borla stypes ive gotta say i miss my H pipe, the burble at low speed accel was so satisfying and the X just doesnt have it, although the X sounds good at wide open throttle

Sounds good Mr………👍🏿😂✋🏿💯

@AutoExec1

Жыл бұрын

I appreciate that man.

great car. I've always been a fan of mustangs.. We practically have the same engines except mine is a Windsor. I have a 1998 F150. 4.6 2v BBK headers, BBK throttle body, K&N air intake, and flowmaster exhaust no cats.. I'm from okc also. I live just down the street from you on 21st and Portland.. I have a set of Comp Cams that I never installed. If your interested let me know. Great video content man keep them coming..

@AutoExec1

Жыл бұрын

Which headers are you running? I want to do headers but I don't know if I should do shorty or long tube. Are you going to cars and coffee on the first? I would definitely be interested in some cams, how much are you wanting? I appreciate that, thanks for watching and I definitely will.

@myf1fetty708

Жыл бұрын

@@AutoExec1 I have shortys. There isn't that much of a big selection for long tubes on my model year. In your case I would get long tubes

@AutoExec1

Жыл бұрын

@@myf1fetty708 that's what I've heard sounds best. There not too expensive either.

What’s the safety way to lift this car? I have a 95 4.8L. I want to add at least 3 inches to. I don’t like the lift cup options, hoping to lift it using normal parts that are taller?

Not a fan of pressure washing the battery or alternator but I’m sure Ford knew this would happen and addressed that. Might need MIL eliminators or after market O2, places like Steeda and American Muscle can get you what you need if the check engine light comes on and she starts running rich after the exhaust work

@AutoExec1

Жыл бұрын

Yeah, ive never had any issues spraying the engine bay with these cars. when I got the X pipe put in we looked and the o2 sensors are not there. That's at the top of my list for sure.

Is this a 4.6 Litre Mustang GT ? Thought older Mustangs had bigger Oil Filter ?

I comment, and subbed on your first video. Nice progress. I have the 2004 RedFire GT convertible. I have the 5spd. I'm thinking of adding 3.73 gears in the diff. I think that would be a noticeable mod ?

@AutoExec1

Жыл бұрын

Thanks for subscribing. I definitely think 3.73's would be a decent change. I plan on doing the same to mine.

Once u do cold air intake n bbk t-body it sound more loud n mean with x pipe n really mean Flowmaster outlaws mufflers too you'll get what looking for

@AutoExec1

Жыл бұрын

I can't wait, I'll definitely be looking into flomaster outlaws thanks.

X Pipe definitely!

@AutoExec1

Жыл бұрын

It should definitely be more aggressive sounding though shouldn't it? It's missing that X pipe sound.

@beerwrenchgarage

Жыл бұрын

@@AutoExec1 No, its sounds good. What mufflers/catback are you running? If you go with some SLPs, you'll get a little more of that sounds you want. Also LTswill really make it roar - but they are pricey and a pain to install.

@AutoExec1

Жыл бұрын

@@beerwrenchgarage it's catless (all the cats) to a flomaster 40. The X pipe is almost all the way back to the mufflers. I was looking at pictures and it should definitely be closer to the back of the transmission. I don't know if that would even affect the sound. But I've watched videos of other GT's with this same setup and they sound WAY better. I am definitely doing something like outlaws or 10 series.

And put some armor all on all the rubber and plastic to make it shine

Glad its getting some love. Does the soft top still work?

@AutoExec1

Жыл бұрын

It sure does, it's actually a good running car.

Yes take care of your tang man

Is ok to be spraying your battery and alternator with a high pressure hose ?!?

@AutoExec1

Жыл бұрын

I've never had any issues with these cars doing that. But I wouldn't spay super close for long periods. I can't say the same with other cars though.

So what's going on with those holes in the front bumper cover?

@AutoExec1

Жыл бұрын

I honestly don't know. They were there when I got it and couldn't figure what Purpose they served.

In my opinion the X-pipe sounds way better with straight through mufflers and the H-pipe sounds really good chamber mufflers

@AutoExec1

Жыл бұрын

You mean like a SLP LM1 style muffler? I do also like the H pipe too. But in my opinion the cats have to go no matter what.

@ThatLoud3v

Жыл бұрын

@@AutoExec1 yep! I have a 05 gt with Longtubes headers O/R X-pipe and pypes pype bombs sounds good I used to have a 04 gt with shorty headers O/R H-pipe and flowmaster super 44 mufflers it sounded great

@AutoExec1

Жыл бұрын

@@ThatLoud3v you should put some videos of yours on. Would you recommend short or long tube headers? I've been trying to decide which one. I was thinking about doing flomaster 10's.

So what's is leaking on the bellhousing?

@AutoExec1

Жыл бұрын

It does have a small trans leak.

make sure its a true cold air intake not one sucking in hot engine bay air thatll lower performance and get a plastic intake manifold plastic wont hold heat i personally like the H pipe its deeper and wont give you that raspy tone if you remove those flowmaster 40s which id recommend cause those flow like a turd its gonna be raspy as hell id go with some vibrant resonators those 2Vs can sound amazing with very little work great vid ill have to subscribe

@AutoExec1

Жыл бұрын

I'll definitely make sure I get a true cold air intake. Do you think the BBK intake is a good option? Alot of people have told me to stick with a plastic manifold so I'll definitely be doing that as well. I was thinking about getting flomaster 10's lol it would be pretty loud.

@dakotajones8010

Жыл бұрын

@@AutoExec1 wouldnt go with anything chambered itll restrict flow i only stick with straight through mufflers or no mufflers at all my 5.0 just has hi flos H pipe and vibrant bottles its loud when i get on it but its pretty chill just cruising. for intake just a quick google search ppl recommend the K&N high flow filter remove snorkel from the airbox, and remove the air silencer screen from in between the airbox and MAF. apparently the stock intake is fine id assume that as well seeing as its just a 4.6 2v it wont need alot of air and all the aftermarket intakes are metal so itll just suck up heat

@AutoExec1

Жыл бұрын

@@dakotajones8010 electric cutouts would probably be good for a straight through muffler. That's probably exactly what I'll do with the intake. Thanks for the advice.

@dakotajones8010

Жыл бұрын

@@AutoExec1 your welcome always willing to help

Are you selling the off-road H pipe??

@AutoExec1

Жыл бұрын

The shop I went to actually kept it. I need to start telling them I want to keep the cats and stuff lol

H pipe for sure !

@AutoExec1

Жыл бұрын

The H pipe did sound pretty good. I can't decide which one I like more.

@AK-40-SLEVIN

Жыл бұрын

@@AutoExec1 will ya payed for the X pipe , rock that for awhile .

cel just for your cats?

@AutoExec1

Жыл бұрын

Yeah my cats are gone

Your next oil change, pull the dipstick, your new oil will go in a lot faster.

@AutoExec1

Жыл бұрын

I'm definitely going to be doing that. Thank you.

Please keep postings updates.

@AutoExec1

Жыл бұрын

I definitely will, there's alot to come for this car.

H pipe definitely sounded better

@AutoExec1

Жыл бұрын

I've had more people say they prefer the H over the X and at first I agreed. But I'm liking the X more and more.

yeah H pipe sounds better

@AutoExec1

Жыл бұрын

Definitely, I need the right X pipe.

@KB2.9L

Жыл бұрын

​@DavidMcall check out a UPR O/R X pipe you'll love it guaranteed.

@AutoExec1

Жыл бұрын

@@KB2.9L I'm definitely about to google UPR X pipe. Thanks for the advice.

@KB2.9L

Жыл бұрын

@@AutoExec1 you're very welcome

bad idea to throw water into an engine bay LOL

@AutoExec1

Жыл бұрын

Eh my engine is sealed. I'm not worried lol

Put the top down!

@AutoExec1

Жыл бұрын

I'll probably do some tunnel pulls with top down in the next video. It just been so hot here lately lol

X pipe

@AutoExec1

Жыл бұрын

Agreed. Though I do want a BBK X pipe on there.

H pipe sounded pretty good. What's ur email? I'd like send pic of my mustang