Bro buys a new zuma every week😂😂😂😂

@MOPBOYZ

9 ай бұрын

you got any forsale?

@heaven_x

9 ай бұрын

@@MOPBOYZ nah unfortunately 😂

@littymontana3115

9 ай бұрын

@@MOPBOYZ pre bug or bug eye?

@MOPBOYZ

9 ай бұрын

prebug

@faxbest1336

9 ай бұрын

@@MOPBOYZ I got a 1987 Honda aero 50 that’s not running with new carb and new head gaskets and seals

Full support from Italy 🇮🇹. In my city is full of "booster". Keep up with your content man. Happy to see an european culture across the ocean. Anyway i have a Piaggio Nrg Power 😊

@dufr9503

8 ай бұрын

thats the mc3 right? i got the mc1/ntt, nrg is amazing

@aghsgh

8 ай бұрын

@@dufr9503 Nope. It's the mc4 technically ☺️ Google it and you see the difference. Same engine of the nrg mc3 but with different chassis and different bodywork. On my KZread Channel you find a video of my NRG Power. Go to see It 👍🏻

@bandeano3870

2 ай бұрын

24 years ago I also had an MBK booster. it's crazy that these scooters are still so popular

@aghsgh

2 ай бұрын

@@dufr9503 nope. Is the "mc4" the next One to mc3. It call NRG Power

@aghsgh

2 ай бұрын

@@bandeano3870 yeah. Crazy... It's Crazy to think my NRG Power turns 20 years this year. Is a 2004, One of the First NRG Power ever produced

Always a good day when you post

@MOPBOYZ

9 ай бұрын

🫶🏻🫶🏻

wow, never heard of fixing a new part!! That sucks!! I have a 99 pre bug in boxes that I just got titled and I am fixing it up to make it work really well. Thanks for all your information and help I found most of the big ticket items already so far so good. Its a solid bike over all!! Thanks-W

Nice! My scoots are going into storage for winter soon; Hoping to get a little more nice weather before then; At least I can watch your videos!

always a W, would love to see a mbk booster spirit like mine 🤘

Thank you for the all the information in your videos it helps a lot :)

@MOPBOYZ

9 ай бұрын

yessir glad it helps 🤘🏼🤙🏼

LOVE

perfect timingggg

Thanks for mentioning that thermometer!

Have you heard of Inner Rotor ignitions before? Malossi, Italkit, Polini and Stage6 have made one

finally a new video👍🏻

I just had a stage 6 intake with a bad casting in the same spot, SSS took care of it luckily.

@MOPBOYZ

9 ай бұрын

a lot of flaws lately on these scooter parts sadly

Way to go.

Get your self a Honda sfx50 that would be cool

You should build a 125 cc Zuma to 170cc Zuma! Maybe even TwinTurbo’s’s!😂

Finally!

Yoo bro get the paggio ciao, that was so fun light bike and if you gonna tuning this its gonna be crazy

Can you please link the homemade leak down test parts and supplies been trying to find them for a few weeks now struggling to build my own cylinder leak check device , or please make a video thanks !

Ayeeee good lookss you put it in a new video so I ain’t half to go back to the bed from Canadia bet

I'd buy one off yah

Nice

Ive been building scoots a long time and yet have i owned a pre bug. They are unicorns in texas

What is a good 70cc setup for a af18 engine? At the moment im riding with a malossi 70cc sport cilinder

Is there a running in period or can you whack it from day one?

Hello can you please explain anulate the electric starter plug, in europe the ground cable its the yellow and green.

try to build a gilera stalker its proberly the wildest thing you can build but i think you need to imort it

mk2 sport pro would really show its potential with c16, r1200 mxs exhaust

Yeah buddy need to get a video of you and the boys ripping get go pros on each of them

@MOPBOYZ

9 ай бұрын

youtube will love that forsure

@phat56pat

9 ай бұрын

@@MOPBOYZ but it may just be fun

Cool to see her coming back , one question why is it common to delete the starter on this bikes and also have seen it on elite and dios ?

@MOPBOYZ

9 ай бұрын

the starter gear adds about 30g rotation weight on the crank. also the starters junk out a lot with high compression builds

@briansegarra9312

9 ай бұрын

@@MOPBOYZ ohhh thanks didn't knew

Bro you have to buy a full malossi kit of you swap the motor whit let’s say an aerox you can build it whit a testarossa cylinder

I can't believe how big them cases are compared to theses like two stroke bike engines

@laurapalmerTDGE

9 ай бұрын

These are the scooters as we know them in Europe, they cannot be compared with, for example, a Honda Camino from the past. The MBK (same as Yamaha) as in the video actually only has advantages, because of the thick wheels, good handling, but also because there are a lot of parts available for it. I also had an MBK 20 years ago and enjoyed it immensely. In combination with a Polini 65cc kit and a Gianelli exhaust. An adapted vario and that's all it had to be. Currently, scooters are rarely sold, the market has shifted in this area. You should look for Metrakit, Polini, Malossi, Airsal, Hebo, Fabrizi, Pro Race, Bidalot, Yasuni, etc. I replaced all this with a KTM SX125. But, scooters are and remain fun, you can work with them endlessly and adjust them and strive for a different result each time. Cheers.

Can u do a buddy 50cc build

need more zuma vids

@MOPBOYZ

9 ай бұрын

i agree

Yeeheee

Where is your workshop I would like to go one day! I love your videos even though I don't understand English at all hahaha greetings I live in DC and I'm from Venezuela

@seanking2954

9 ай бұрын

It's in his garage

Anyone you know have experience with the pm tuning 70cc kit?

Yessirski 😂

Hey brother. I found a 2000 Derbi Predator 50 with 1149 original miles. I got it from the 80 year old guy who bought it new in Chicago. He rode it on and off from 2000-2002. Been in a climate controlled garage since then. Title and all manuals came with it. It's put up. Mint condition. It's for sale.

@MOPBOYZ

9 ай бұрын

nice man, i have a derbi gp1 same thing but predator comes with a bit of a different motor in it!

❤

I have a small scooter like this but is a yamaha target 50cc and I will put a 86cc top performances with the small wheels 😅 And I have another one target 50cc I will put a 100cc 2fast with the wheels in 12 inches 😊

Get a yasuni c16 exhaust you wil notice mutch more power because of the high rpm cilinder and a low rpm 50cc leovince zx

@MOPBOYZ

9 ай бұрын

yea i have c16 on a few of my bikes, i like them for top speed. this is not my bike and the customer doesn’t want to pay for a pipe, if it was mine i’d run a yasuni r cause i like bottom end pipes more

@Jaydennnnnnnnnnnnnnn

9 ай бұрын

@@MOPBOYZ yeahhh i ride low rpm bikes but the stage 6 cilinder is a high rpm one,if you put a low rpm pipe you lose all youre power , low rpm cilinders is yasuni r /high rpm cilinders are c16 or 21

You put the washer back on the front cvt pulley under the nut? Leaving it off ads 5mph top speed also leave stock but variator side. Blue springs? Hmm. Whats wrong with a leo vince zx exhaust? Unbaffled muffler and bored out header side it works just fine. thermometer? On a 2stroke? Ad a 4 coil longer strut off another scooter to accommodate the taller rear rim/tire setup another 5mph top end. Right carb. Wrong head. 70cc kit 68mph, 200lb rider when I'm done

@nico-broo

6 ай бұрын

What’s wrong with the thermometer

@joeblow8206

6 ай бұрын

@@nico-broo it's an air cooled 2stroke. We beat those too hell at high temps. Add a little oil to the gas tank on top of what the oil tank puts in. Just a little too much is bad. Dif temp spark plug from stock, can vary, and no worries

Bro i love your videos,Will you buy aerox someday? I think people would like that and also me

@MOPBOYZ

9 ай бұрын

they’re not in america

I bought a pre bug for 40 bucks can’t get it to start has compression spark and clean carb any ideas on what to try

@MOPBOYZ

8 ай бұрын

you sure it’s getting fuel?

what cranks do u usually use in ur zumas?

@MOPBOYZ

9 ай бұрын

stage 6!

Did you put the 7g weight straight from the top performance kit in the bike ?

@MOPBOYZ

9 ай бұрын

yea but it’s too heavy for my liking. i’ll be changing it

@dylanpowell5663

9 ай бұрын

@@MOPBOYZ yeah figured you’d run 5.5-6.0s

Got a peuegot speedfight 2 100cc 2 stroke project I got from an old farmer. No idea if it runs its just sat in my shed lol

@rv9990

8 ай бұрын

Worth to repair! Those 100cc engines are quite quick and fun to ride.

@mitchjackson3830

8 ай бұрын

@@rv9990 didn't know that haha I'll have to dig it out in winter and have a play. I don't have a key or anything.

DO YOU SELL ONE BOOSTER?

i wish you could find £200 zumas where i live 😭

You need Buy a Peugeot ludix or import one its the best wheelie moped you can get

@MOPBOYZ

9 ай бұрын

if you pay shipping

Bro pulls out the steel hammer after he nicely put’s in the bearing😂

@MOPBOYZ

9 ай бұрын

just some love taps make sure she’s seated

Bro how can i order this to in India

Mannn where do you find all these low prised zumas????

@MOPBOYZ

9 ай бұрын

this one was at the junkyard / auction yard lol

Junkyard zuma ain’t so junky no more🫡🔥💪🏼

@MOPBOYZ

9 ай бұрын

your zuma up next

I just left my theft recovery roughouse at the tow yard, spray painted missing plastic panels, burnt up cylinder from not premixing no plates poped ignition, my mint custom scoot turned into meth wheels😢

@campervanbug7658

9 ай бұрын

Not gonna pay the 400$ fee to have my shit stolen and fuked up and hafta fix all of it

@campervanbug7658

9 ай бұрын

Just gonna find an elite or zuma to build better aftermarket anyway

@MOPBOYZ

9 ай бұрын

man i’m sorry to hear that what a headache 🤦🏼‍♂️🤦🏼‍♂️hope you find a new one!

@campervanbug7658

9 ай бұрын

@@MOPBOYZ I have a kx112 I'm building just got a lighting coil I'm gonna try to make work, but the roughhouse was my delivery vehicle money maker just bummed about it big time

one hand filming how 1980ssss

What the budget for a build like this? Or a ballpark cost?

@MOPBOYZ

9 ай бұрын

1500-2000

How much $ for the big bore and everything u need to do tbis

@MOPBOYZ

2 ай бұрын

link in description to scooterswapshop if you want to check prices

where do you get your jog parts?

@MOPBOYZ

9 ай бұрын

link in description!

Next time just buy a sheet of gasket material and use the one you have as a template for a new extra one, will save you a week

The bearings don’t need grease?

@MOPBOYZ

Ай бұрын

the bearings are oiled by the 2stroke oil mixed with your gas

@Zach-sg5uu

Ай бұрын

@@MOPBOYZ Okay thank you.

before you drive on it, why do you not put the cylinder shields on, the piston is gonna lose so much compression if it gets warm and you don't got the shields on and then you can just replace the piston

@MOPBOYZ

8 ай бұрын

you let it run for a few min no shrouds to do a break in you want the bike hitting 200 then shut off and cool down and repeat. you check for leaks, and you can’t check for leaks with shrouds, you don’t ride it like that no shrouds lol.

Known as a Yamaha BWs in the Netherlands 😁

@pnmotoren3928

9 ай бұрын

Of mkb booster toch :p

Zuma? I had one of them but mine was called a yamaha BW'S

@MOPBOYZ

9 ай бұрын

you’re probably not in america

what happend to the puch maxi ?!

@MOPBOYZ

9 ай бұрын

parts take forever to ship for that thing , all from overseas 🤦🏼‍♂️

First or 2nd idk

FRST!!!

Why do people want non bugeyes over the bugeyes? Can someone please give me pros/cons, I’m looking at a 2008 Zuma that has 6500 miles on it or a 2007 that has 1600 miles and a 70cc kit

@montey1017

2 ай бұрын

They are lighter

u could give me one zuma🤭

$200 dollars for the bike, how much in parts? A total of.......?

I swear each time you post a video the yamaha zuma's on marketplace just disappear

@MOPBOYZ

9 ай бұрын

ahahahahh

what is this Bws

Moped heads lol yea this is a nice build

get a qt50

holy shit been watching for forever and just realized i wasn't subscribed

first

give me pliz

How much to do something like this total $ parts wise?

I want to buy a scooter from you.

@MOPBOYZ

9 ай бұрын

dm @MOPBOYZ on instagram