Testing the Triarc Systems intermediate Slide Stop on the Atlas Nyx
Just shooting
Жүктеу.....
Пікірлер: 14
@jessedavis4699 Жыл бұрын
Great video. Looking forward to the comparison video.
@americantrucker9813
Жыл бұрын
Thank you ! I appreciate you and good deal I’ll be on it very soon !
@magdumpmonday Жыл бұрын
I may get that slide release for my prodigy. And then the c2 as well.
@americantrucker9813
Жыл бұрын
I highly recommend it! But it does require Fitting so you can send it to Triarc systems and they can do it or I can make a video to help anyone who wants to DIY
@magdumpmonday
Жыл бұрын
@@americantrucker9813 I seen a few vids on the fitting so i might be okay. I’m guessing take a little of the part that goes through the slide. The diameter might be to big around.
@americantrucker9813
Жыл бұрын
It comes with an oversized pin, so you will need to cut it down to the right lane and with because the diameter of the pin is also oversized. And the slide slot is undersized so you will need to run sandpaper through it until it is the correct width for your slide cut. I think the easiest way is to clone it to the size of your slide. Stop if that one is working properly I will say that the slide stops that you already have if it is the factory one usually has pretty big tolerances so you don’t need to make the new one exactly the same way unless you want to, but it does give you the ability to get an even better and fit today
@mrfishfreak66 Жыл бұрын
I love your videos. Where can I find a rmr aos plate for the springfield Prodigy? A14b please help..lol
@americantrucker9813
Жыл бұрын
Thank you very much! I found a little gun store in Texas called native outdoors. They claim to have the AOSRMR plate in stock. You should confirm they are legitimate by giving them a call and confirming they actually have it. I would do that for you, but I am currently driving, their website is nativeoutdoors.com
@mrfishfreak66
Жыл бұрын
Thank you so much. I have the Holosun EPS and found out it fits my A12b plate.I am very happy. I appreciate the quick response
@pirronehits Жыл бұрын
Would you recommend this for the prodigy ?
@americantrucker9813
Жыл бұрын
Absolutely 100%. It is perfect for The Prodigy. It does require a little fitment but it requires zero modification. It is designed specifically for the 2011 so you don’t need to modify the grip for the slide stop for it to fit The Prodigy.
@americantrucker9813
Жыл бұрын
I can make a video on how to fit it to your prodigy I still have a new one that I have been saving for a video. It’s pretty easy I promise you will have no trouble.
@pirronehits
Жыл бұрын
That would be awesome!
@americantrucker9813
Жыл бұрын
@@pirronehits stay tuned I will be working on that in the next couple of days.
Пікірлер: 14
Great video. Looking forward to the comparison video.
@americantrucker9813
Жыл бұрын
Thank you ! I appreciate you and good deal I’ll be on it very soon !
I may get that slide release for my prodigy. And then the c2 as well.
@americantrucker9813
Жыл бұрын
I highly recommend it! But it does require Fitting so you can send it to Triarc systems and they can do it or I can make a video to help anyone who wants to DIY
@magdumpmonday
Жыл бұрын
@@americantrucker9813 I seen a few vids on the fitting so i might be okay. I’m guessing take a little of the part that goes through the slide. The diameter might be to big around.
@americantrucker9813
Жыл бұрын
It comes with an oversized pin, so you will need to cut it down to the right lane and with because the diameter of the pin is also oversized. And the slide slot is undersized so you will need to run sandpaper through it until it is the correct width for your slide cut. I think the easiest way is to clone it to the size of your slide. Stop if that one is working properly I will say that the slide stops that you already have if it is the factory one usually has pretty big tolerances so you don’t need to make the new one exactly the same way unless you want to, but it does give you the ability to get an even better and fit today
I love your videos. Where can I find a rmr aos plate for the springfield Prodigy? A14b please help..lol
@americantrucker9813
Жыл бұрын
Thank you very much! I found a little gun store in Texas called native outdoors. They claim to have the AOSRMR plate in stock. You should confirm they are legitimate by giving them a call and confirming they actually have it. I would do that for you, but I am currently driving, their website is nativeoutdoors.com
@mrfishfreak66
Жыл бұрын
Thank you so much. I have the Holosun EPS and found out it fits my A12b plate.I am very happy. I appreciate the quick response
Would you recommend this for the prodigy ?
@americantrucker9813
Жыл бұрын
Absolutely 100%. It is perfect for The Prodigy. It does require a little fitment but it requires zero modification. It is designed specifically for the 2011 so you don’t need to modify the grip for the slide stop for it to fit The Prodigy.
@americantrucker9813
Жыл бұрын
I can make a video on how to fit it to your prodigy I still have a new one that I have been saving for a video. It’s pretty easy I promise you will have no trouble.
@pirronehits
Жыл бұрын
That would be awesome!
@americantrucker9813
Жыл бұрын
@@pirronehits stay tuned I will be working on that in the next couple of days.