It’s actually AR2209 manufactured here in Australia by ADI (Australian Defence Industries) and I believe packed down and labelled H4350 in the US.

@richardt.4224

2 жыл бұрын

I'm glad I came across this, as I was under the same impression, THANX. I use 41gr behind a Hornady 90gr ELD-X bullet

@atairuy

4 ай бұрын

It says made in Australia so probably it is

40.7 gr H4350 in a .243 with a Berger 90 gr BT target bullet. 3 years running now my 13 and 14 year old kids have won over everybody in our local summer benchrest league in hunter class with this load. Proud dad moment.

Enjoying your videos with Guy and Travis. Great to have that extra input from guys who have a lot of knowledge. Regards from Australia.

H4350 is a unicorn in our area for years. They simply can't produce enough. My favorite .30-06 powder under 180gr projectile.

@gregrn779

2 жыл бұрын

@0give they’re out now, it’s getting crazy, you literally have to check 2-3x’s/day. But thanks for posting this, I was able to ge two pounds of the Win 6.5 ball powder that otherwise I would have missed out on.

@Carlyle_SFFS

2 жыл бұрын

Agreed, have not seen H4350 or Varget in over year in my area. Substations are okay but not the same as H4350.

@Mark-uq9km

2 жыл бұрын

@0give I'm gasping for LR primers. I can get powder and bullets in .308 and .458, (but not .358.) Manufacturers have been playing to the lowest denominator of new gun owners shooting .223 and .308 factory ammo and don't give a rip about reloading. Meanwhile, us reloaders get the hind teat with availability of powders, bullets, brass and especially primers for large rifles.

@vikp6115

2 жыл бұрын

GunBroker will have h4350 but it's 3x the price there :(

@LoveEncoded8

Жыл бұрын

Powder is making its way back in slowly by now. Best of luck. PA has wuite some. NY not so much

Flexing 2 8lb jugs of H4350 right now is like walking into high school prom with super model on each arm. All the guys looking jealously and drooling. 🤣🤣👍

Good to see you boys enjoy using Australian Munitions powder. H4350 is made in Australia and its called AR2209 at home. You’re welcome.

Hodgon 4350 is a fantastic powder for 7mm Rem Mag also, awesome velocity and accuracy with 165gr Hornady monolithics out of a 24 inch barreled Mdl 700. Thanks for the video!

Hey guys love your work 👍🏻 here in Australia H4350 is adi2209 same powder, I’ve used it in lots of cartridges of my own and loaded for others aswel, I’ve always found it to be an extremely accurate powder and very easy to tune loads with, I have used it in 6.5creed, 25-06, 6.5-284, 257weatherby, 7mm rem mag, 30-06, 300win mag, 338win mag all have worked great.

H4350 works great for 270 Winchester as well

@jonathanpeterbarker3518

Жыл бұрын

Please share load data !

Used it in a few rounds like my 260 Rem and in the past 30-06 but I'm saving all we have for my wife's 6.5x55, does great with almost any bullet we have tried from 120-155 gr. Looking forward to working with Stabal 6.5 in my 260 and also the 6.5x55.

yeah would love to get my hands on some h4350. been using imr4350 and staball 6.5 since it's usually available locally

I Have a Christianson MPR in the 6.5 creedmoor. Was using H-4350 41.5 grs BR2 primers excellent groups less than.05 MOA 5 Shot groups which i normally do on all my rifles..I had a few pounds of IMR 4451 which I had great success also..same 41.5 grains seating depth 20 thou off the lands with H ELD match 140 gr..Just changed my primers to Fed 210 Match..Also in the 0.5 MOA range Both powders have done well for me..H4350 The Enduro IMR 4451.

Of coarse it's good, made in Australia by ADI, we call it AR2209. I only use ADI powders.

Recent subscriber here, and while KZread might push your longer projects more, these shorts where you discuss all the things from all the suppliers are real gold.

Great video. I started using H4350 in my 6.5 CM AR10 with 22" barrel. 140 ELDm 41.5 at 2698 fps. For a gas gun it does pretty good with less than .68" groups at 230yds. My savage elite 6.5CM 24" does well with 40.2 of H4350 with the 140eldm at 2720 fps. Because of your staball video an seeing it available now, I had to try some of that. It does well with the 147gn eldm with 43.6gn @ 2847 😲 in the savage. I have to play with it in the AR now :-)

I bounce between h380 and 4350 for two of my rifles . I use 380 in my 22-250 in the summer and 4350 in winter . 4350 in summer and 4064 in winter with my .308 purely for velocity in both rifles due to the massive temperature swing in my area which helps maintain the velocity at long range with both .

I love H4350 for my 6.5 & 6 Creedmoor rifles, but haven't seen any available anywhere for well over a year. Same with Varget. Fortunately I bought both in quantity before the madness began. Crazy world we live in now.

I'm glad I came across this, as I was under the same impression, THANX. In NZ Hodgdon is getting hard to get, so I went looking for something else and found the ADI AR2209 I use 41gr behind a Hornady 90gr ELD-X bullet

I use IMR 4350 with cast bullet loads in my milsurps with long barrels. Works great. My SMLE loves it with cast.

Perfect timing! I was just wondering about powders as I start reloading.

@gscotty311

2 жыл бұрын

best be camping on the sites for those powders. Make an account and stay logged in. If you waste time logging in after you've added a hot item to your cart(like 4350 or Varget) you will most likely be too late lol. It's a crazy race out there.

I've used IMR 4350 for many years and now H4350 sense it came out. Both are great powders, and they cover many cartridge sizes and calibers. The large thing with H4350 is the graduals are shorter for easier feed through load throwers. Also great groups at the range

I just bought my first H4350 ever. Neat story. But I have loaded 7mm RemMags since mid 80s. I mainly used IMR4350 & IMR4831 with all bullet weights. I started using H1000 & Retumbo. But I worked up a sweet whitetail load with IMR4451 @ 2825. I have a "ladder test" worked up with some different bullets using IMR4451 & H4350 to compare the 2. Eager to get velocities, SDs, & groups. Thank you all.

The only Hodgdon labelled powder I have used is their Superformance for my .30-06's. Otherwise I have been a devoted IMR powder reloader using the IMR 4064 and 3031 most of the time for my .308 and .35 Remington. I am gradually moving toward the Winchester 748 and 760 as my 'go-to' powders for the .308 and .30-06. The pressure index is lower than other powders and the velocity lost due to this is negligible. And, they meter much more easily. I like your thoughts about compressed loads even though you didn't say compressed. I never thought about the gap between the primer and powder in the casing if you are pointing downward in a hunting situation or combat position. I loved seeing the .375 H&H Magnum in your line-up.

I've been using the H4350 in my Savage BA10/110 6.5 CM for about two years. I use the Hornady 143 gr ELD-X and 40.6 grains of the H4350. I get good and low ES and average around 2,750 fps. It is now my go-to powder.

I’m running 61.6g of H4350 over a 190g Berger VLD Hunter in my 300 WSM. My OAL varies 3.015 - 3.030” but my CBTO is 2.3325” so I had to modify my mags to fit and replace my Tikka’s bolt stop with a LA one. I’ve been getting 2960fps @ 3550’

I loved H4350 in my 6GT. Probably even more than Varget. It was rock solid using Remington 7 1/2 primers and 105-109 grain bullets.

I’m doing load development for my savage 110 .270 win. I’ve looked up load data for my components. Not a lot out there for my components. But there is some. I chose H4350 because I can get plenty of it and it’s temp friendly. I also chose it because I can use it in many of my hunting different cartilages. So far I’ve been very satisfied with H4350 powder handling. Now I’m getting ready to range test the five .270 cartilages I loaded yesterday. I’m expecting good results. I’ve studied and purchased the equipment a little bit at the time. Now it’s time to see what I’ve learned. Thanks Gav and friends for being part of the cyber reloading school.

I use 4350SC short cut version in my 260 Rem loads. 42 grains in both my model 7 and my AR-10 platform. 140 grain sierra btsp and 127 grain Barnes ttx. Use Winchester primers with Lapua brass

H4350 is my favorite. For my Ruger Precision in 6.5 Creedmoor I am running 43.5 grains of H4350 to propel 142gr Sierra Matchking at average velocity of 2,888 fps. After testing ended up with .251 grouping at 100 yards.

@BuffaloTrace602

Ай бұрын

Sounds spicy… any signs of pressure? What barrel length?

A little late to this discussion, My shooting platform is a Sako Tecomate chambered in .300 WSM. I have been loading Burger 168 VLD at 64gr's for about 10 years now. FPS is almost 3100. This set up is amazing. My farthest hunting shot was 460 yards on a Elk in Wyoming. Late October. I loaded and slighted in around August. No change in performance, no complaints.

Been using 41 gr of H4350 with140 gr Berger hybrid targets. Working out real nice so far.

I've been using H4350 for both .300 Win Mag, and .338 Win Mag. 64.2 gr of powder for 200 gr HORNANDY ELD-X gives me MV of 2,830 fps. 69.4 gr of powder for 230 gr ELD-X .338 gives me MV of 2,860 fps. I started using this powder, because I couldn't find my usual other powders, and it's worked out well. Brought home many dead caribou with those loads over the last few years.

I have 2lbs of the stuff. I'm looking forward to having the time to develop loads with H4350 and my 22 Creedmoor.

6.5X47 Lapua, 39 grains of H4350 with 130 grain Berger bullets. Good for 600 yds. 38 grains of H4350 with 142 grain Sierras also at 600 yds. Neither is a super hot load in my rifle but near the top of Sierra’s recommended maximum.

Love the H4350! My favorite too! I’m running H4350 on a 9.3X62 Mauser, 7x57 Mauser, 7 SAUM, 257 Roberts, 6mm Creedmoor, and 6.5 PRC. It’s an awesome versatile powder! I need to try and develop my loads for the 308win so that way I can see if I can stop using Varget.. On the 6CM I running it with 108, 109, 112 and 115 Berger’s almost with the same loads getting very low and consistent sd. Also it’s very accurate on my 7SAUM with the 180, 183 and 184 gr bullets. Super low sd as well. Impressively accurate on the 7mm Mauser with 140-180 gr bullets, 257 Roberts from 100-135 gr bullets and 9.3X62 Mauser with 250-285 bullets.

@jkopcha1

Жыл бұрын

Do you have any data for H4350/IMR4350 and the 140gr. range in 6.5 PRC? It would be greatly appreciated. Thanks, John

I use h4350 in my 6.5 creed as well as reloader 16 and 23. I just got some of the imr enduron powers I’m going to try. The 6.5 staball works better in my 7mm-08 with 160 grain bullets.

I ran h4350 in my 22 br, using 95 gr smk @ 2950. Extremely accurate and consistent. Shot inside the 6 and 6.5mm out to 1500 yards in high winds.

I was finally able to stock up on this and Varget. Did you ever do more work with Staball. Im still using that for my 6.5 creedmoor over H4350 - Im running 42.5g @ 2870 on a 140g ELD-M out of a 26 inch barrel. Using Varget and H4350 for my 6mm and my x47s though.

30/06 runs great with H4350 (Ar2209) uesing it for years now👍👍🍻

Bought a pound of h4350 years ago. Didn't use much before switching to Vihtavouri powders. Expensive stuff, but really consistent and not as fouling in my guns... I might have to break out that h4350 again and do some more experimenting.

I use Varget for my Dasher behind a 105gr Berger. Want to try H4350 whenever I can get a fresh batch. The 30-06 150gr speer flat nose load I developed 50 years ago was with 55.5 grains of IMR-4350. I have 8 pounds of the old stuff, probably 40-50 years old. Still works fine, just don't know how the old IMR compares to the H-4350.

I use it for my 7mm-08 with 140gr nosler BT. I’m getting ES of 6 and 5 shot groups nearly all in the same hole. I use a bergara b14 ridge

I’ve had good luck using H4350 in my fast twist .22-250 Bergara B-14 HMR. Best group so far using 69 SMKs has been .32” with several other .50” groups

N560 has been my go to for the last two years! In my 6.5 creed!

I use H4350 for my 30.06, and 300 WinMag. Using the 168 grain TTSX Barnes bullet for both. Both perform well, but for some reason my WinMag really came alive with this powder. 75 grains is at 3320 with an sd of 11. Browning X-Bolt 26” barrel. And for some reason the recoil isn’t that bad? I only get 2870 out of my 30.06 with 57.5, but recoil feels similar.?? 30.06 is about 4 ounces lighter and has a 24” barrel (Rem 700). Anyway, it’s my favorite powder.

H4350 a favorite for my .585 AHR, 155 grs. behind a 750 Woodleigh weldcore...Quite the buffalo stopper.

IMR 4451 and H4350 are excellent choices for the 6.5 Creedmoor, especially with 140 grain match bullets.

Shooting a 6XCII with 39.0gr of H4350 and 105 Berger VLD Target consistently around the 1/4 inch 9shot groups. I've trusted H4350 in a number of cartridges now and it has always preformed. I want to try that StaBall 6.5 in a 6.5 Creed..... plz restock

H-4350 is my go to for my .257 Roberts and a 110 bullet.

I’ve been running 41.7gr H4350 with 140 ELDMs Peterson brass and BR2s in my 6.5 Creedmoor comp guns and it has been an unbelievably accurate load in 3 barrels now. Each barrel preferred a node right around there +/- 0.2gr. I’ve gotten single digit SDs and velocities around 2,800 FPS. On a few occasions i have taken this out to a mile.

H 4350.H1000. h110, stabal 6.5 retumble and more other i have to choose from, love hand loading.

I just started using H4350 since I recently acquired a 6.5 Creedmoor. My first tests produced .3 groups out of a new barrel. The load I used is 140 ELD-M, 40.3 H4350, CCI 34 primer, and Alpha brass. I haven’t had as much luck with it in 7-08, but I’m not worried since I have 12 lbs. of Big Game and a pile of 140 BT’s that get .2 groups.

@LoveEncoded8

Жыл бұрын

Hey i have the same set up. H4350, eld-m 140s and cci#34 nato primers as well. Good solid brass. Ive only went up to39 gr but more accurate as the velocity increases. Seen this with other people on youtube as well. Any advice on a sweet spot or is that your only test? With 39 gr i get just close to 1” groups usually 3 at .5 and 2 flyers.

Good job. Per your request, the following are my three (diverse) uses for H4350: 6.5x47 39.3 130 Berger VLD 2,703 .280AI 60.0 140 Accubond 3,150 .375 Rem Ultra-Mag 100.0 260 Accubond 3,005 (Hammer of Thor)

I like this content on powders.

I remember when I first started reloading about 10 years ago, Varget was all the rage. Now I rarely hear about it.

I haven’t been able to find h4350 powder for a while now. I just bought the IMR4350, I’ve heard it was same, just a little more temperature sensitive.

I use the most H4350 in the 6.5-284 with142 grain match bullets.

I started with IMR 4350 in my 7 Rem Mag years ago. As it became hard to get, switched to H4350. Great consistant powder. Running 62gr behind 145gr BTSP

@A.Mad.Lad89

2 жыл бұрын

What velocity do you get?

@garyandtricia1

2 жыл бұрын

@@A.Mad.Lad89 If I remember right it's 3150-3200 ish.

Interesting video. Thanks for posting this. How does IMR 4350 compare to H4350? I just picked up two lbs of the IMR to load 180 gr bullets in 30-06. I usually use either Varget or H4064 for 150 gr bullets

I use to run IMR 4350 in almost every caliber I had, I have since gone to Varget, RL16 ........ nothing wrong with, either IMR or Hodgdon in the 4350 markets, I still have a few pounds of IMR 4350, that I use strictly in my 7mm Mag....................................

down in the south east i'm doing a ladder test on the 223, 6.5 creed , 6.5 prc and .308 all at the same time with wide verity of powders and bullets some time in the next two weeks.

I picked up a couple of cans of H4350 and want to work up a hunting load for the Hornady 140grain SST

Gavin, excellent video. Love the versatility of 4350. Can you please explain the color coding in the burn rate table you showed?

@Mrjaspgu

2 жыл бұрын

The color coding is just the different brands of powder.

varget and 4350 are two great powders made down under by australian defence industries here we know them as adi 2208 and 2209

@seanfrazer4589

2 жыл бұрын

Well said mate -- that’s if we can get it !!!

@bigseddo4036

2 жыл бұрын

@@seanfrazer4589 my local had some 1kg tubs in January. Haven't been back since

@johnsmith-ub7vr

2 жыл бұрын

@@seanfrazer4589 Yeah supply not too bad here as yet

@clasvirhodes4969

2 жыл бұрын

My favorite is IMR 4350. Perfect for everything from 243 win to 7mm mag and 3006

A review of 4350. So stunning and brave.

It's a great powder but please also do one on IMR 4451.

Good luck getting it or primers, last time I saw prices for good powder it was 60 a #.

Great-- create additional demand for a powder that experienced reloaders already can't get their hands on..... Thanks

I’ve been wanting to get some H4350 but can’t find any. I would use for my 6.5 creedmor

About all I've used in my 6.5CM, I've though about trying StalBil 65 but haven't found any. I also want to try H4350 in my 6.5/06.

Use it in my 270 win with 130 gr soft points. Bought a bag of a 1000 at a garage sale 30 years ago and still using them. That load has taken many many deer over the years.

I can't get h4350 but could get a ld of imr 4451. Been loading 165 gr sierras, 168gr tsx's in my 30-06,and 139 gr in my 7mm-08's. Very similar to h4350. I would like to get h4350 if I could. It looks like for now imr 4451 is a very good substitute. I would like you to do a similar test with imr 4451 if you could. Thanks.

I shoot a Ruger M77 long range. Favorite load is h4350 ( 40.2g.) ,147 gr. ELD Match. Not a hot load, but 5 shot group under 1/2 inch at 100 yard. I don’t think my old eyes can do any better. Good for sub moa at 600 yards.

56.5 h4350 168 bthp mk in 3006 load I good in my father's 700 rem BDL. Shoots good performs good. We hunt also with that load and it will kill about anything that gets in it's path so I think I'll stick with it.

300 WSM and H4350 work very well. 63.2 gr of powder, FED215M and Winchester brass with 200 ELD-X

Have h4350 and seem to keep pulling the N555 off the shelf for the 6.5cm

I’ve got to get some H4895! My Garand needs some!

Sometimes I buy powder just because they have it in stock. Last year, at different times, I was able to find Staball 6.5 and H4350.

I’d like to know where you are getting all this reloading supplies

Love me some h4350! 41.5 grains with a 105 Berger Hybrid is absolutely sweet and in the .1s when I do my thing. 41.5 w a Berger 140 or eld 140 as well is fantastic. 41.5 (catching a theme yet?) is also fantastic in my 25 CM and shoots groups from .0s to .2s all day long with Berger 135s. 75 grain elds and 39.1 g in my 22 CM is a lethal combo for chucks and super tight ES… have had ES of 2 MPH on five shot groups with 6.5, 6 and 25 CM with 22 CM not far behind. I’ve had 9 creedmoors in four chamberings and won’t even try another powder it just works!

I have been trying to get ahold of some H4350 for 6 months. Bought my forester co-ax and haven't been able to purchase large rifle primers or h4350. Have Sta ball, Accurate 4350 and Superformance. But can't move forward without primers....very discouraged.

Both my 260 Remingtons love h4350

I have never tried it, but would if some dropped in my lap. Varget is good stuff! I've also used H414 and got sub 3/4 moa with 140 Accubonds out of my Savage 111 in 6.5 creed. Thanks for the information, it is good stuff.

@reddawng43x91

2 жыл бұрын

There’s no 4350 varget or h414 anywhere’s to be had

I run 37.7 grains of H4350 in my 6GT with 110 SMKs and 450s. 3030 fps and one hole.

I run a 6XC for PRS and H4350 is the best powder money can buy for it.

H4350 and the Loch Nest monster are the same, heard about it but never seen it. 😎

H4350 gives very consistent velocity with 286g bullet in 9.3x62 Mau. My rifle is limited by 20” barrel but still achieve 2400 fps

works good in the 22-250AI with 55gr and 60gr projectiles

6.5 creedmoor load with Nosler RDF 140gr: 41.0gr H4350, COAL 2.760in (they like to jump alot). Getting 2800fps

my Bergara 6.5 creedmoor loves 42gr of h4350 in sig brass and 140eldm. sub .25MOA 2750fps 6.0SD

Good stuff. Have you tried Shooters World Long Rifle powder in your 6.5 creed and if you have..how did it compare with h4350? I shoot a rem. 260 with the h4350 and am getting good results. Heard that the long rifle is as good but am unable to get either one right now.

I couldn’t find more than a lb or 2 of H4350 anywhere in the last year or so. I was lucky and found a good amount of IMR4350 though, and have gotten amazing results with that. As good as H4350 for sure.

4350 is the most versatile powder out there. Although I’ve always had more consistent velocities with IMR from 243 up to 30-06. H4350 is slightly slower burning and produces a little higher velocity with larger capacity cases.

@OFFICIALUND

2 жыл бұрын

Which IMR powder? My H4350 produces SD’s of 7-8fps (10 shots), and has a temperature variability of 2 FPS from 33 degrees through 102 degrees. 6.5CM, 140 Berger Hybrid, Lapua brass, AI AX.

You can't beat H4350 and IMR 4350 powders. They load so many different cartridges and bullet weights extremely accurate.

43.5gr of H4350 (easy to remember, LOL) works well with MY 7mm-08 162gr A-Max.

Interesting comment... what designates the "Creedmore Class" of powders/burn rates? That might be an interesting exploration all by itself. 🤔

I loved h4350, then staball dropped and I tried it when couldn’t get 4350. I like staball but I’m going back to 4350. Just seemed easier to develop loads with. Staball was kinda picky for me.

@blueridgeboy7721

Жыл бұрын

Same here

Have been using H4350 in my Ruger precision in 6.5 cr. Hornady 140 gr. eld match at 41.5 gr. At 2725 fps. With 5 shot groups of .258" plus or minus. the smallest at .236" at 100yds. The only powder i use in my 6.5 cr

H4350is a super powder but we dont have an in like your show does I must assume because it hasnt been seen in a long time. I have used it in my 260 rem and love it but my fall back is reloader -17 which works as well. Where can I get an 8 pounder of H4350 in case you had to buy it from a dealer. Love your video's and I have a suggestion for you to make your channel really grow.

Try it in wsm calibers! 300 wsm 178gr eldx 62.5 gr h4350 Federal 210m 3030fps In my kimber mountain ascent holds 1/2” groups all day long