Hi can you tell me please what the name is of these black "hinge rods" which make the flying wings? I mean the parts which are directly connected with the gear wheels :) And maybe where I can buy it? ^^' I mean the black parts in min: 2.05 Thank you! :)

muy buenas demostraciónes

very nice

Mikkel can we make this to a man wing to fly

fantastic...

Gostei muito isso vai ajudar por em prática Homem mensageiro da verdade vai voar

Nice video sir , Do you have the STL file of this flip-flop wings Mahayanist..

y= A * sin ( angular velocity) x= cx + B * sin ( angular velocity) pitch = cos ( angular velocity) ; -)

Please tell me how can I buy it if it is not possible to buy than how can I make it tell me about its parts please sir .

please can u tell me how made the servos move along side with the motor at the same time?

@mulciber1212

9 жыл бұрын

MrJoshua49651 Arduino microcontroller. Keeping a tight loop which first updates speed according to a potmeter input, and actively PID control that speed. Also the encoder feedback is used to monitor where in the flap cycle the wings are, and the servo positions are adjusted to fit this cycle. Try not to make long functions or loops inside the main loop. This should keep the totalt cycle time low, and thereby the update speed on servos and motor high.... I tried using different servo libraries... It is some time ago, so i'm not sure, but maybe the library SoftwareServo, helped get the possible speed up...

@MrJoshua49651

9 жыл бұрын

Mikkel Johansen thank you!! this was really helpful but can u show me how u mounted the servo to the wing? of it to rotate like that. as I tried mounting mine but it wouldn't rotate properly l.

@mulciber1212

9 жыл бұрын

MrJoshua49651 Locked the rotating tip to one tube, and made an extended plate which locks to the servo body and moves the other tube relative to the first tube. My solutions wasn't perfect, so no need to copy that part :P Should be easier to just review your own solution :)

@MrJoshua49651

9 жыл бұрын

Mikkel Johansen I thought so even, as I was checking on the festo smart bird. thank you alot!! u have been really helpful . also u can check out my channel I make radio controlled aircraft's and quadcopters, maybe might find them interesting and subscribe please lool

Can you please tell me how you made the wing pitch up and down?

@mulciber1212

3 жыл бұрын

I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861

@user-fw1ki1pu4o

3 жыл бұрын

@@mulciber1212 thanks m8

@lauraenright3667

2 жыл бұрын

What's the small motor in the middle of the two larger one's for?

@lauraenright3667

2 жыл бұрын

@@mulciber1212 please read my comment

Hello sir Full vidio makeing wing work

Which motor you use

@mulciber1212

3 жыл бұрын

Hi Sunita, It's been 4 years, so I don't remember the exact model, but it is an outrunner motor. I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861

👍😀

Can u make me this but at a slow rate that is battery operated I need to my my fairy wings move

@mulciber1212

3 жыл бұрын

What? o_O

@amyhamner9072

3 жыл бұрын

@@mulciber1212 do u know how to make this mechanism

@mulciber1212

3 жыл бұрын

@@amyhamner9072 I made it, so I would assume I could make it again... But I am unsure what you are actually asking me in the first question?

@amyhamner9072

3 жыл бұрын

@@mulciber1212 I need one for fairy wings but I want them 🔋 battery operated and at a slower speed.

@mulciber1212

3 жыл бұрын

Hi Amy Stewart, thats not a question 😄 what is it you are asking me?

2:00