Nice video sir , Do you have the STL file of this flip-flop wings Mahayanist..
@aljosacar54732 жыл бұрын
y= A * sin ( angular velocity) x= cx + B * sin ( angular velocity) pitch = cos ( angular velocity) ; -)
@logo3di_nho9092 жыл бұрын
👍😀
@bettowin_44132 жыл бұрын
Mikkel can we make this to a man wing to fly
@pawanprabhatinewlovesong20183 жыл бұрын
Hello sir Full vidio makeing wing work
@amyhamner90723 жыл бұрын
Can u make me this but at a slow rate that is battery operated I need to my my fairy wings move
@mulciber12123 жыл бұрын
What? o_O
@amyhamner90723 жыл бұрын
@@mulciber1212 do u know how to make this mechanism
@mulciber12123 жыл бұрын
@@amyhamner9072 I made it, so I would assume I could make it again... But I am unsure what you are actually asking me in the first question?
@amyhamner90723 жыл бұрын
@@mulciber1212 I need one for fairy wings but I want them 🔋 battery operated and at a slower speed.
@mulciber12123 жыл бұрын
Hi Amy Stewart, thats not a question 😄 what is it you are asking me?
@ControlfreakxControlfreakedits3 жыл бұрын
Which motor you use
@mulciber12123 жыл бұрын
Hi Sunita, It's been 4 years, so I don't remember the exact model, but it is an outrunner motor. I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861
Gostei muito isso vai ajudar por em prática Homem mensageiro da verdade vai voar
@user-fw1ki1pu4o4 жыл бұрын
Can you please tell me how you made the wing pitch up and down?
@mulciber12123 жыл бұрын
I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861
@user-fw1ki1pu4o3 жыл бұрын
@@mulciber1212 thanks m8
@lauraenright36672 жыл бұрын
What's the small motor in the middle of the two larger one's for?
@lauraenright36672 жыл бұрын
@@mulciber1212 please read my comment
@CuriousIITian4 жыл бұрын
Please tell me how can I buy it if it is not possible to buy than how can I make it tell me about its parts please sir .
@MichiMind6 жыл бұрын
2:00
@Payne.Heartnet6 жыл бұрын
Hi can you tell me please what the name is of these black "hinge rods" which make the flying wings? I mean the parts which are directly connected with the gear wheels :) And maybe where I can buy it? ^^' I mean the black parts in min: 2.05 Thank you! :)
@jairogomez26667 жыл бұрын
muy buenas demostraciónes
@123windyron7 жыл бұрын
fantastic...
@georgejung84447 жыл бұрын
very nice
@MrJoshua496519 жыл бұрын
please can u tell me how made the servos move along side with the motor at the same time?
@mulciber12129 жыл бұрын
MrJoshua49651 Arduino microcontroller. Keeping a tight loop which first updates speed according to a potmeter input, and actively PID control that speed. Also the encoder feedback is used to monitor where in the flap cycle the wings are, and the servo positions are adjusted to fit this cycle. Try not to make long functions or loops inside the main loop. This should keep the totalt cycle time low, and thereby the update speed on servos and motor high.... I tried using different servo libraries... It is some time ago, so i'm not sure, but maybe the library SoftwareServo, helped get the possible speed up...
@MrJoshua496519 жыл бұрын
Mikkel Johansen thank you!! this was really helpful but can u show me how u mounted the servo to the wing? of it to rotate like that. as I tried mounting mine but it wouldn't rotate properly l.
@mulciber12129 жыл бұрын
MrJoshua49651 Locked the rotating tip to one tube, and made an extended plate which locks to the servo body and moves the other tube relative to the first tube. My solutions wasn't perfect, so no need to copy that part :P Should be easier to just review your own solution :)
@MrJoshua496519 жыл бұрын
Mikkel Johansen I thought so even, as I was checking on the festo smart bird. thank you alot!! u have been really helpful . also u can check out my channel I make radio controlled aircraft's and quadcopters, maybe might find them interesting and subscribe please lool
Пікірлер
Send contact number
Nice video sir , Do you have the STL file of this flip-flop wings Mahayanist..
y= A * sin ( angular velocity) x= cx + B * sin ( angular velocity) pitch = cos ( angular velocity) ; -)
👍😀
Mikkel can we make this to a man wing to fly
Hello sir Full vidio makeing wing work
Can u make me this but at a slow rate that is battery operated I need to my my fairy wings move
What? o_O
@@mulciber1212 do u know how to make this mechanism
@@amyhamner9072 I made it, so I would assume I could make it again... But I am unsure what you are actually asking me in the first question?
@@mulciber1212 I need one for fairy wings but I want them 🔋 battery operated and at a slower speed.
Hi Amy Stewart, thats not a question 😄 what is it you are asking me?
Which motor you use
Hi Sunita, It's been 4 years, so I don't remember the exact model, but it is an outrunner motor. I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861
Quero saber os nomes dos inventores [email protected]. obg
Gostei muito isso vai ajudar por em prática Homem mensageiro da verdade vai voar
Can you please tell me how you made the wing pitch up and down?
I just googled, and you can find my old presentation online (In danish): prezi.com/2acrnxxhm66b/design-of-flying-mechanical-bird/ And my thesis can be downloaded for free here (In english :D): findit.dtu.dk/en/catalog/2292739861
@@mulciber1212 thanks m8
What's the small motor in the middle of the two larger one's for?
@@mulciber1212 please read my comment
Please tell me how can I buy it if it is not possible to buy than how can I make it tell me about its parts please sir .
2:00
Hi can you tell me please what the name is of these black "hinge rods" which make the flying wings? I mean the parts which are directly connected with the gear wheels :) And maybe where I can buy it? ^^' I mean the black parts in min: 2.05 Thank you! :)
muy buenas demostraciónes
fantastic...
very nice
please can u tell me how made the servos move along side with the motor at the same time?
MrJoshua49651 Arduino microcontroller. Keeping a tight loop which first updates speed according to a potmeter input, and actively PID control that speed. Also the encoder feedback is used to monitor where in the flap cycle the wings are, and the servo positions are adjusted to fit this cycle. Try not to make long functions or loops inside the main loop. This should keep the totalt cycle time low, and thereby the update speed on servos and motor high.... I tried using different servo libraries... It is some time ago, so i'm not sure, but maybe the library SoftwareServo, helped get the possible speed up...
Mikkel Johansen thank you!! this was really helpful but can u show me how u mounted the servo to the wing? of it to rotate like that. as I tried mounting mine but it wouldn't rotate properly l.
MrJoshua49651 Locked the rotating tip to one tube, and made an extended plate which locks to the servo body and moves the other tube relative to the first tube. My solutions wasn't perfect, so no need to copy that part :P Should be easier to just review your own solution :)
Mikkel Johansen I thought so even, as I was checking on the festo smart bird. thank you alot!! u have been really helpful . also u can check out my channel I make radio controlled aircraft's and quadcopters, maybe might find them interesting and subscribe please lool