Hey! I found it. Page133 of my manual. 88.5 ft-lb. Thx, man. Ride on.
@mjcpirate1
5 жыл бұрын
Good work!
@wildwhiskeywolf81985 жыл бұрын
I’m thinking about doing the same, my only concern is since the wheels will stick out further is the mud slinging into the cabin more.
@mjcpirate1
5 жыл бұрын
XLIV it does sling mud a bit more but it’s not that bad in my opinion.
@diesel98315 жыл бұрын
I got the same jacket
@russtalerico5 жыл бұрын
Ok. Thank you
@dougmoran252 жыл бұрын
No thread lock........should go back and use some medium strength. They will come off but won't vibrate loose.
@amitor12343 жыл бұрын
It does make any changes?
@robbiemazzoni54722 жыл бұрын
Are they 2" spacers? Thanks for sharing. Informative video brother, much appreciated!
@mjcpirate1
2 жыл бұрын
Yes they are 2 inch
@wesbrooner42495 жыл бұрын
so how is it doing?? I just ordered some for my teryx4.....hope I dont regret it
@mjcpirate1
5 жыл бұрын
Wes Brooner no regrets for me I ran it hard over the summer up in the mountains and on trails. No issues at all!
@amurdock18
3 жыл бұрын
@@mjcpirate1 still no issues? This comment is encouraging, running a 2" lift, 2" spacers and 30x10-14 tusk terrabites. Hopefully nothing snaps!
@mjcpirate1
3 жыл бұрын
@@amurdock18 still no issues what so ever
@erronbreedlove4880
Жыл бұрын
@@amurdock18 any issues ? Just got my t4 base and wanted to run 2in spacers and 2inch lift with 28x10-14 all around
@roncombs257014 жыл бұрын
How has the machine been holding up are u still happy with it? And how much did the spacers help u
@mjcpirate1
4 жыл бұрын
Ronald C machine is running great! No issues! They really helped the stability of the machine. I really like them
@roncombs25701
4 жыл бұрын
@@mjcpirate1 very awesome 🙌 I've been watching video after video lol researching before I buy. I do believe I'm going to go pick up a new teryx4 for us and the kids. I appreciate your input, one more thing tho how well does it keep up with the RZRs on the trail?
@mjcpirate1
4 жыл бұрын
Ronald C on the trails it’s great! Mine will go anywhere and it’s stock except the spacers. Now if you want speed this is not the machine lol as I said it will take you and the family damn near anywhere! And the engine braking is also awesome! I have no regrets with the teryx
@angelabrandonsantacruz45964 жыл бұрын
Good video, but does the shirt have sleeves lol?!
@mjcpirate1
4 жыл бұрын
Hey I got it for free lol
@myslash092 жыл бұрын
Hello when you installed your spacers did you have thread showing on the studs?
@mjcpirate1
2 жыл бұрын
Got to 4:28 in the video. It shows what it looks like. Hopefully it answers your question
@ryanjenkins97904 жыл бұрын
Any issues? What about with a full load?
@mjcpirate1
4 жыл бұрын
Ryan Jenkins none at all! Been beating on them too! Go check out my other channel @outdoor beardin! I just put a video up from when I was in Michigan over the summer!
@joseparra57635 жыл бұрын
I just tighten my lug nuts until they make a sound and I know it’s good, I don’t have an electric ratchet or whatever
@joesageser97073 жыл бұрын
Any issues with brake caliper more exposed??
@mjcpirate1
3 жыл бұрын
Nope nothing!
@joesageser9707
3 жыл бұрын
@@mjcpirate1 thanks for reply
@duridersa Жыл бұрын
How have they held up?
@mjcpirate1
Жыл бұрын
Still running them with no issues
@russtalerico5 жыл бұрын
Did it improve the ride any?
@mjcpirate1
5 жыл бұрын
rjtaler as far as stabilizing yes! I have no complaints.
@russtalerico
5 жыл бұрын
@@mjcpirate1 What about the comfort?
@mjcpirate1
5 жыл бұрын
rjtaler ya it didn’t change the comfort at all. Still rides the same as stock.
@mrchicken81705 жыл бұрын
What do you tighten the lugs nuts to on the torque wrench? How many pounds?
@mjcpirate1
5 жыл бұрын
MR Chicken honestly that’s one thing I didn’t like about super atv they didn’t send any specs or instructions! So I just went with me gut so to speak
@mrchicken8170
5 жыл бұрын
@@mjcpirate1 I called super atv and they said tighten to factory specs. I can't find anything that states what factory specs are for 2018 K T 4le.
@mjcpirate1
5 жыл бұрын
MR Chicken hmmm. Have you tried looking up the manual for it?
Пікірлер: 41
Looks great, wouldn't mind doing mine.
Hey! I found it. Page133 of my manual. 88.5 ft-lb. Thx, man. Ride on.
@mjcpirate1
5 жыл бұрын
Good work!
I’m thinking about doing the same, my only concern is since the wheels will stick out further is the mud slinging into the cabin more.
@mjcpirate1
5 жыл бұрын
XLIV it does sling mud a bit more but it’s not that bad in my opinion.
I got the same jacket
Ok. Thank you
No thread lock........should go back and use some medium strength. They will come off but won't vibrate loose.
It does make any changes?
Are they 2" spacers? Thanks for sharing. Informative video brother, much appreciated!
@mjcpirate1
2 жыл бұрын
Yes they are 2 inch
so how is it doing?? I just ordered some for my teryx4.....hope I dont regret it
@mjcpirate1
5 жыл бұрын
Wes Brooner no regrets for me I ran it hard over the summer up in the mountains and on trails. No issues at all!
@amurdock18
3 жыл бұрын
@@mjcpirate1 still no issues? This comment is encouraging, running a 2" lift, 2" spacers and 30x10-14 tusk terrabites. Hopefully nothing snaps!
@mjcpirate1
3 жыл бұрын
@@amurdock18 still no issues what so ever
@erronbreedlove4880
Жыл бұрын
@@amurdock18 any issues ? Just got my t4 base and wanted to run 2in spacers and 2inch lift with 28x10-14 all around
How has the machine been holding up are u still happy with it? And how much did the spacers help u
@mjcpirate1
4 жыл бұрын
Ronald C machine is running great! No issues! They really helped the stability of the machine. I really like them
@roncombs25701
4 жыл бұрын
@@mjcpirate1 very awesome 🙌 I've been watching video after video lol researching before I buy. I do believe I'm going to go pick up a new teryx4 for us and the kids. I appreciate your input, one more thing tho how well does it keep up with the RZRs on the trail?
@mjcpirate1
4 жыл бұрын
Ronald C on the trails it’s great! Mine will go anywhere and it’s stock except the spacers. Now if you want speed this is not the machine lol as I said it will take you and the family damn near anywhere! And the engine braking is also awesome! I have no regrets with the teryx
Good video, but does the shirt have sleeves lol?!
@mjcpirate1
4 жыл бұрын
Hey I got it for free lol
Hello when you installed your spacers did you have thread showing on the studs?
@mjcpirate1
2 жыл бұрын
Got to 4:28 in the video. It shows what it looks like. Hopefully it answers your question
Any issues? What about with a full load?
@mjcpirate1
4 жыл бұрын
Ryan Jenkins none at all! Been beating on them too! Go check out my other channel @outdoor beardin! I just put a video up from when I was in Michigan over the summer!
I just tighten my lug nuts until they make a sound and I know it’s good, I don’t have an electric ratchet or whatever
Any issues with brake caliper more exposed??
@mjcpirate1
3 жыл бұрын
Nope nothing!
@joesageser9707
3 жыл бұрын
@@mjcpirate1 thanks for reply
How have they held up?
@mjcpirate1
Жыл бұрын
Still running them with no issues
Did it improve the ride any?
@mjcpirate1
5 жыл бұрын
rjtaler as far as stabilizing yes! I have no complaints.
@russtalerico
5 жыл бұрын
@@mjcpirate1 What about the comfort?
@mjcpirate1
5 жыл бұрын
rjtaler ya it didn’t change the comfort at all. Still rides the same as stock.
What do you tighten the lugs nuts to on the torque wrench? How many pounds?
@mjcpirate1
5 жыл бұрын
MR Chicken honestly that’s one thing I didn’t like about super atv they didn’t send any specs or instructions! So I just went with me gut so to speak
@mrchicken8170
5 жыл бұрын
@@mjcpirate1 I called super atv and they said tighten to factory specs. I can't find anything that states what factory specs are for 2018 K T 4le.
@mjcpirate1
5 жыл бұрын
MR Chicken hmmm. Have you tried looking up the manual for it?
@jaysgarage4623
10 ай бұрын
Specs 88.5 ftlbs.