Пікірлер

• 
  @vonclohk5072 ай бұрын

  Same thing happen to me sorta: some guy in a van ran a Stop sign and then I had to slam on my brakes. They stopped me then the brakes continued to the floor and I was still slightly moving. Scary stuff. Got out and looked and rear right leakage coming out strong. Can't wait to watch your vid for help!

• 
  @mjcpirate12 ай бұрын

  If it’s the rear those are easier than the fronts from what I remember. If you have questions let me know

• 
  @toodjackson44384 ай бұрын

  Unbelievable how clean that truck is your never finding any like that in the north east

• 
  @tonemcmaster70764 ай бұрын

  Thanks man for the video. just bought a 2004 silverado that had a broke brake line and i'm gonna attempt this myself found the leak and after your video gave me courage to do it myself. thanks brother

• 
  @mjcpirate12 ай бұрын

  Did you get your brakes done? If you have any questions I’ll try my best to answer

• 
  @C10chevy855 ай бұрын

  How did the factory wheels work out after alignment? Zone said 16 inch wheels would not work with their lifts

• 
  @Repomam20006 ай бұрын

  I forgot to ask you before but, did you ever drill put the bolt in the extra hole in the diff bracket or did you end up welding it in? Seems its not in when you put it all back together.

• 
  @kalebanderson28178 ай бұрын

  I bought this kit and installed it myself thanks to your video a year ago and has been running great since then. Would have been 10x more difficult if you hadn't documented. Thanks so much for doing so. But also agree probably wouldn't recommend doing it alone if yourself if you can afford to have someone else do it.

• 
  @tonyrader710210 ай бұрын

  Not sure your plastic ties will last very long, usually you need black ties that are uv rated, they also handle the heat better.

• 
  @klumsytone Жыл бұрын

  So, I installed this kit on a 2002 Suburban 1500 Z71. I had to modify the top Differential bracket so that it sat flush, modified the crossmember by drilling out two holes for the up and down bolts since they do not line up, and was not able to install the differential skid plate since it was too short. Just FYI, for anyone trying to do this on a 1500 frame.

• 
  @cody6.6max Жыл бұрын

  That trucks falls ur fucked

• 
  @spenceratkins Жыл бұрын

  Not sure but I think the shocks were installed upside down.

• 
  @j.m.r8486 Жыл бұрын

  Get you some Elka shocks and 30s. You will not be disappointed.

• 
  @carsonsteeley1039 Жыл бұрын

  Doing the same to my truck rn. With out your vid I’d be loses. I was wondering how you did this by yourself then I realized your built like a fucking Elk

• 
  @carsonsteeley1039 Жыл бұрын

  Lost*

• 
  @localsource Жыл бұрын

  Thanks for the Video, Why did you remove the torsion Keys? Do you think you could have done the job without removing them? Jacking the truck off the ground releases the tension off the keys and bar. If the lower control arm isn’t articulated there really doesnt seem to be a reason to remove them. Im in NH. WD40 isn’t enough! lol i’ll need to red hot them then bang ‘‘em out. A game i’m not interested in playing.

• 
  @mjcpirate1 Жыл бұрын

  I think it comes with new keys I’m can’t quite remember and you have to move the lower control arm quite a bit. Getting the torsion bars out of the way helps too if I remember correctly.

• 
  @localsource Жыл бұрын

  Oh, yes, i already did the keys and the upper control arms. each one has effected the next so i’ve bout each piece individually. Not the best approach.

• 
  @XtremeCrawl_RC Жыл бұрын

  Does the uca ride on the droop stop?

• 
  @mjcpirate1 Жыл бұрын

  No

• 
  @duridersa Жыл бұрын

  How have they held up?

• 
  @mjcpirate1 Жыл бұрын

  Still running them with no issues

• 
  @unclejerry78 Жыл бұрын

  I didn't watch whole video...was the torsion bars hard to get out

• 
  @unclejerry78 Жыл бұрын

  I'm in gurnee if ya ever need help

• 
  @unclejerry78 Жыл бұрын

  Wen in doubt call her out ...can't tell ya how many times I had the Ole lady help.....God bless that sweet woman

• 
  @mjcpirate1 Жыл бұрын

  Amen to that!

• 
  @klumsytone Жыл бұрын

  Boss, did you end up cutting 2 1/8” or 2 1/4?

• 
  @mjcpirate1 Жыл бұрын

  I just did what the instructions told me and it worked perfect

• 
  @stevenovosel21622 жыл бұрын

  Bro you said something about being from Michigan, but at some point you must’ve been in the Burgh (Pittsburgh) because I see the Pittsburgh tools from Harbor freight! lol That’s a good thing, though! 🤙🏻

• 
  @mjcpirate12 жыл бұрын

  Lol I love those tools. Cheap and they still work loo

• 
  @ericbrown92012 жыл бұрын

  Hey man, where’s that video of your exhaust? Nice duramax! Looking at buying one someday!

• 
  @mjcpirate12 жыл бұрын

  Long story lol never got to it. Living in ca with too many rules

• 
  @Anth40442 жыл бұрын

  Wow just saw your video this was awesome video you really did great job and it came out fantastic your very patient guy and it paid off, Also you got good woman helping her man great team work. Thank you for sharing beautiful Truck 💪👍💯💯🙏

• 
  @alejandrocisneros64612 жыл бұрын

  Awesome work bro. This is the only video that’s gives you depth instructions and real struggles to putting this kit in. I’m about to do this kit and now realize everything that is really needed. Thanks for the video 🙏🏽

• 
  @mjcpirate12 жыл бұрын

  Thanks! Let me know if you have any questions

• 
  @dougmoran252 жыл бұрын

  No thread lock........should go back and use some medium strength. They will come off but won't vibrate loose.

• 
  @benfisher88632 жыл бұрын

  After one year what are your thoughts?

• 
  @mjcpirate12 жыл бұрын

  Great lift. No issues at all. My only regret is that I wish I would have gotten a bigger lift.

• 
  @benfisher88632 жыл бұрын

  @@mjcpirate1 oh really? Why’s that?

• 
  @benfisher88632 жыл бұрын

  @@mjcpirate1 why do you wish you went bigger?

• 
  @mjcpirate12 жыл бұрын

  @@benfisher8863 I just want more lift to be honest.

• 
  @benfisher88632 жыл бұрын

  @@mjcpirate1 I wish they made like a 4.5”

• 
  @brianmeredith232 жыл бұрын

  Thanks for putting in the work. How's it been treating you for the past year?

• 
  @mjcpirate12 жыл бұрын

  Thank you! Its honestly been a great kit. No complaints or issues. My only looking back moment is that I wish I would have gotten a bigger lift. It looks good but I want more height lol

• 
  @dmcmaster8512 жыл бұрын

  Good video love the honesty if u want it put in the time unplug and do it!! Nothing feel better than doing!!

• 
  @zachs83802 жыл бұрын

  Great video! I'm getting ready to put this kit on my 04. Did you end up putting the rear Blocks in?

• 
  @mjcpirate12 жыл бұрын

  Thanks! No, I didn’t. I’m still debating lol just don’t wanna deal with ball joint issues like my last truck

• 
  @myslash092 жыл бұрын

  Hello when you installed your spacers did you have thread showing on the studs?

• 
  @mjcpirate12 жыл бұрын

  Got to 4:28 in the video. It shows what it looks like. Hopefully it answers your question

• 
  @robbiemazzoni54723 жыл бұрын

  Are they 2" spacers? Thanks for sharing. Informative video brother, much appreciated!

• 
  @mjcpirate13 жыл бұрын

  Yes they are 2 inch

• 
  @BobElgin3 жыл бұрын

  You guys have a lot of fun, i think i might have used a cussword or 2 lol. Hopefully in the next couple of weeks ill get mine. Love the trail system, where is it at? "Thanx Fer Sharin"

• 
  @mjcpirate13 жыл бұрын

  Thanks. This is at hollister hills in hollister ca

• 
  @peytondardenne62423 жыл бұрын

  any trouble with stock wheels?

• 
  @mjcpirate13 жыл бұрын

  None

• 
  @peytondardenne62423 жыл бұрын

  @@mjcpirate1 do you think that since I’m running bigger tires (33x12.5) I’ll have any trouble. Thanks for replying

• 
  @mjcpirate13 жыл бұрын

  @@peytondardenne6242 no you shouldn’t. I’ve seen guys run 35’s

• 
  @davidparraz75493 жыл бұрын

  Thanks man! I just dropped this kit in my 8.1 . I attached the bracket to the diff (lower bolt) then the top two bolts, passenger, and finally the lower control arm. I didn't have any help so this was the best way to do it solo. I tried for about an hour to drop the diff in over the bracket......not going to happen. Either way thanks for posting this . It really helped out when I was dropping this kit in.

• 
  @mjcpirate13 жыл бұрын

  Hell ya! I’m glad it helped!

• 
  @joesageser97073 жыл бұрын

  Any issues with brake caliper more exposed??

• 
  @mjcpirate13 жыл бұрын

  Nope nothing!

• 
  @joesageser97073 жыл бұрын

  @@mjcpirate1 thanks for reply

• 
  @keepingitsimple47403 жыл бұрын

  Beautiful truck, man. Great job on your video and appreciate you posting this. I have been going back and forth between the Zone 3" or 6" for our trucks. I read your comment where you said now you want more. I think I might feel the same, so may as well go bigger now. Price difference is only about $350. These lift kits indicate not for Duallys, but just in case anyone is wondering, I have been in contact with a guy over at Lift Kits For Less, and one just needs to tell them it is for a Dually and they will make sure you get the correct u-bolts for the rear. That is the only difference. Everything up front is the same.

• 
  @mjcpirate13 жыл бұрын

  Thank you! Yes, go bigger if you are already on the fence. Im saving up for the 6in now when I could have already had it lol. If you have any questions let me know!

• 
  @southtownsjoe33093 жыл бұрын

  that trucks from california? more like new york.....how about you use the jack stands.....under the truck would be nice...

• 
  @mjcpirate13 жыл бұрын

  Thanks for the advice

• 
  @samgrexton10723 жыл бұрын

  Hey man, awesome video, you were very thorough with your explanations! Do you still love it as much 10 months later? Anything you would do different, aside from the diff bracket? Looking at this kit for my 05 GMC 3500

• 
  @mjcpirate13 жыл бұрын

  I love the kit. The only thing is I already want a bigger lift. Lol but it’s a great kit with quality parts so no complaints as far as that goes

• 
  @samgrexton10723 жыл бұрын

  @@mjcpirate1 awesome, thanks for the reply! Did you have any issues with the steering? Did you have to add anything in to lengthen the shaft or anything?

• 
  @mjcpirate13 жыл бұрын

  @@samgrexton1072 nope nothing!

• 
  @eloyguzman38393 жыл бұрын

  Nice fishing love the video

• 
  @mjcpirate13 жыл бұрын

  Thanks!

• 
  @glazeponyo99963 жыл бұрын

  It was nice having you as a teacher thank you for all of your advice From: (Cain) 😎

• 
  @mjcpirate13 жыл бұрын

  It was good seeing you the other day. I hope you are doing well buddy. Good to hear from you. If you need anything let me know.

• 
  @motard71793 жыл бұрын

  Do you have 16” or 17” rims? I want to do this with my duramax but didn’t know if it will work with my 16” rims and can’t find anything about it.

• 
  @mjcpirate13 жыл бұрын

  I have the 16’s

• 
  @motard71793 жыл бұрын

  @@mjcpirate1 thank you

• 
  @philw39533 жыл бұрын

  Autozone sold me the complete truck , bent and flared for 87 Bucks

• 
  @jahfork41363 жыл бұрын

  Yo sell me that diff bracket if you still have it. Seriously.

• 
  @mjcpirate13 жыл бұрын

  I had to put it back on

• 
  @dariuswatts11053 жыл бұрын

  Mint truck bro

• 
  @amitor12343 жыл бұрын

  It does make any changes?

• 
  @NeilJeanLouis3 жыл бұрын

  Your chevy look shiny, i have the same one with the same stock wheels

• 
  @ncshorty113 жыл бұрын

  This is awesome man, it’s not about the 1600sq ft shops and lifts, you can do it in your drive way with cheap tools, WELL DONE !

• 
  @mjcpirate13 жыл бұрын

  Hell ya thanks man! If you have any questions let me know!

• 
  @davidortega6003 жыл бұрын

  Did you cut out the cats off the truck?

• 
  @mjcpirate13 жыл бұрын

  No just the muffler.

• 
  @davidortega6003 жыл бұрын

  @@mjcpirate1 do you have a video of how it sounds?

• 
  @mjcpirate13 жыл бұрын

  @@davidortega600 I don’t.and to be honest it doesn’t sound too different with just the cats on. I really want to straight pipe it but it illegal here in ca. I will say it sounds better when you get on the truck but at idle is similar maybe a touch more growl.

• 
  @DoggyDogYT3 жыл бұрын

  Good stuff man! This really helps out!

• 
  @Repomam20004 жыл бұрын

  Awesome truck! Thank you for making this video. Im getting ready to order this lift for my 07 classic. If you had to do over, what would you do differently if anything?

• 
  @mjcpirate14 жыл бұрын

  ZimZam78 hmmm to be honest the part in the video where I put the front diff back in and it won’t go in because the new bracket is in the way. I would have made sure before putting the diff back up to check and see if the new bracket fits and take it back off then put the diff up followed by the bracket. I know the directions don’t say to do it that way but it worked a lot better that way for me.

• 
  @Repomam20004 жыл бұрын

  @@mjcpirate1 thank you for the reply. Im looking for one of these kits right now online with the fox shocks you got. I need the c31n if you know anybody that has it in stock.

• 
  @Repomam20004 жыл бұрын

  @@mjcpirate1 Love the headlights also! Where did you pick those up?

• 
  @mjcpirate14 жыл бұрын

  ZimZam78 I got mine at liftkits4less

• 
  @mjcpirate14 жыл бұрын

  ZimZam78 Amazon lol they were the cheapies but they work. I would recommend putting a sealant around them first so they don’t collect moisture inside since they are cheaper. That’s what I did

• 
  @KG-ed9eq4 жыл бұрын

  Thanks for the video, looking at this kit or the 4.5" BDS for my LBZ. Any issues with it so far? On paper, it seems like the best bang for the buck.

• 
  @mjcpirate14 жыл бұрын

  Kenneth Gerdon no issues! Rides great! But, bds vs zone? Bds! Lol but, bang for buck zone is where it’s at