Win one of my cars raffall.com/kevin_talbot

@FarmerFpv

Ай бұрын

Please be careful with real airplanes. It would have been nice if you got a backcountry plane like a Carbon Cub like Cleetus McFarland bought. Don't fly it like a Monster Truck. lol

@steveklingerjr.7200

Ай бұрын

Keep doin what you do Kev!

@PamelaWitt-te3ro

Ай бұрын

Have fun

@dieseladdictryan9511

Ай бұрын

Had a funny thought. If you could find a limousine body you could make the world's fastest rc limo. 204 is a milestone though, and it beat the original goal. You got this Kev, keep up the great work.

@brsrc759

Ай бұрын

Hey Kev! Please do a durability test of the Rllarlo Omni Terminator. You're my go-to for durability tests. 😎🤙🏽

Stay safe on the real aeroplane stuff kevin 🙏

@a-guy1912

Ай бұрын

I'm a bit nervous about him doing it.. I don't want my favorite rc'er to die...

@qtmblur6193

Ай бұрын

@@a-guy1912 he'll be fineeeee

@meltdown78

Ай бұрын

That was my first thought too. These are way too dangerous for beginners. Get a Cessna 150/172 or something similar and work your way up with practice.

@cogboy302

Ай бұрын

Best aircraft quote I've heard was, 'In a twin engine aircraft, if one engine fails, you always have enough power to get to the scene of the crash.'

@WRA838

Ай бұрын

He hasn't even gone solo and he's brought an extra 300 stupidity ²

Learning to fly, takes multiple lessons! Learning to crash only takes once!

For the speed car, try putting some fuel tubing to limit the rear shock travel! This makes it still spongey, but not enough to lift the front higher when the rear squats.

@tuffy3637

Ай бұрын

Nah, he straight up put a turn buckle there so that in theory, no air can get under it and make it backflip

@Krapper515

Ай бұрын

@@tuffy3637 fair

Awesome stuff in the pipeline 🎉

@kevintalbotrc

Ай бұрын

Yo 8s!

Kev you should design and have made a custom chassis with defusers and under Areo inbuilt not separate screw on parts inbuilt like the new supercars like 911 GT3 man a chassis made like that would surely allow much better speeds and downforce. Then you can start on having the wheels machined or printed in some fancy composite

Finnaly the FMS Smasher on the channel, quick tip: FMS sells a speed motor for 13,00 wich is a must and makes it really fun to drive.

Good luck on the painting of the suspension. Looking forward to seeing that done.

Thank you Kev for keeping it real and reminding us whatever it is as long it brings a smile to your face all is good.

Powder coat those parts for the big truck. It will keep up with your bashing 😉 Just beware it will be a thicker coat than spray can. Love your vids as always.

Good on yah kev 👌🙂 please post vids of you learning how to fly ! I reckon people/ fans will love too see that

A lot of different dynamics/parameters involved in the small wheels at these speeds. Someone is going to figure it out. Then it will be a new game again. Keep on keep on.

Kev, how is Clair and her hubby doing? Please let em know we miss them!!!!

I do all types of different things as well. I believe you shouldn't have to explain yourself. Having fun that all that matters.👍

As always great to see you Kev.

Now that you bought a stunt plane, can I be in your last will and testament? jk Kevin, I'm sure you'll be a great pilot. Thank you for all the great content, you have one of the best channels on YT and definitely the best RC one.

Always super great to see you Kevin and I think your planing will go great ❤

your none stop dude, flipping heck 😀👍👍 brilliant fun 👍👍😀

Kev, if you want to paint aluminum, you need to use an iron oxide primer. Then your paint will stick.

Hmmm ....They reduced my holiday to 4 days this year due to work demands. Hardly get a chance to do my RC stuff. So I sold, got rid of all my RC cars. No I have not stopped my hobby. Just decided to make a fresh start. Bought myself a Typhon TLR roller and electronics, Dboots etc. And concentrate on the occasional speed run, which I enjoy. I'm obsessed with speed.😁

Dude, the losi rzr is very capable. I made mine into a crawler with so many scale accesories, have a castle sensored motor and it's just so durable and nuts!

@kippertheman

Ай бұрын

It flips because of the offset but that's fixed. I tunes all diffs and shocks

Please do a durability test of the Rllarlo Omni Terminator. You're my go-to for durability tests. 😎🤙🏽

Hey, Kev. Try some acid etching primer on that aluminum to make the paint stick. Aluminum can be a paint to coat correctly.

Hey Kev, before you spray the chassis part, use self etching primer first. That should give you a good base to lay down the black paint on.

Man, Ive been waiting for the next video about cheapest RC car project for over 2 years! and I am SO GLAD that soon this video will be out! by the way I took the inspiration from this video and built myself a cheap RC car that goes 60mph for a school project! Thank you Kev for all you've been doing these years!

The rubber tread would have to sit on the inside of a carbon or steel rim keeping it in place. I think it can be done but it takes some slim picking of compound and cutting wheels. The compound may need to be injected into the rim. Someone with patience could perhaps weave the right carcass and make it a mini car tyre.

Nice work Kev. Looking forward to seeing you fly your 1:1 plane, or at least the one you are training in. More Raminator build/running vids will be awesome too.

Hey Kev, for painting the raminator. You will want to bead blast (or very lightly sand blast) everything first, then a good wipe down, followed with an aluminum specific etching primer than paint. Just painting the aluminum, it will all be peeling off in no time flat. If it's an option, Powder cost would be a much better choice

Cooooool. On the old sand

Always have loved your videos, Kev Maybe its not just the RC stuff that got you popular. Maybe it is just YOU. High energy with cool friends and some COOOL Sh*T! I have seen that Monster Truck frame in the background for YEARS! Never thought it would actually come to life... Thats why we sub!

Kev I just went to click on the real airplane video notification and it said the video is private?? Did you take it down?? Come on I can't wait to watch that one!!! 👊👊👍👍

Lol you and RC Man are the best. Kev take things slow and good luck in learning how to fly.

Try to find VHT roll cage paint for the Raminator. Itll stick and hold up. Just getting into flying real airplanes myself. But more into bush planes and STOL comps. A little safer and simpler but kinda like plane drag racing.

Hi kev you should powder coat the parts so that the paint sticks on better.

I believe the Perfect Pass servos are actually re-branded AGFRC servos

Awesome!!! Congrats mate😊

speed wheels? You had something there awhile back about the scooter wheels, URETHANE, Good luck, like to see the long one hold together and not die every time a wheel goes bad.

Man Keep cooking and take care of the RC

Unreal what the maxx slash took ... when i had the esc that fried in less than a pack replaced 😅😅😅

At 10:29 I see you have your Official 2026 Isle of Man TTRC (not really a thing, but I know a guy) prototype motorcycle on the wall but I'm not sure it is ready for a full circuit race at 200+ MPH. We need 450 klicks tires, and we need them now!

You are the best man I love all of your videos it would so fun to drive rc cars with you hope all is well

How about modding some skateboard wheels to fit on the saussage? They seems quite sturdy. You could machine some hubs to fit them on.

Awesome.

What if you put a super thin layer of shoe goo on the foam tires? Or even drywall tape and shoe gooo over the foam??? Or rubber tires?? Worst case it makes a great Dyno video 😂

You need acid etch primer for aluminium /Galvanised steel for paint to stick to it properly ..

For the speed cars: most of the cars backflip when going fast because as the car speeds up it gets lighter until it gets to hovering and a little wind will flip them because of how light they get while they go fast. The track could be bumpy and all but what flips them upside down is mainly air pushing on the car while it hovers. You can also see that happen in drag cars and cars which go over 200 miles per hour.

@VS666

Ай бұрын

😂 he’s well aware

@Boogie_the_cat

Ай бұрын

Cars don't "get lighter" when they drive fast. You're implying that the car has less weight when it goes fast. That's physically impossible, unless it's burning fuel. The car gets more air under it as it goes faster, it doesn't magically "weigh less" Derp

Love watching you stuff mate, keep it up

Next Step has to be inflatable Rubber Tires with a fabric and metal mesh imbedded in them. Like Full Size cars

Good luck on all your other ventures - plz don't be too reckless with your new plane! Personally I just follow cuz of R/C stuff - so I am a bit sadge that there will be less R/C content.

Get you a Cub and practice with so we can keep these videos coming 😂😂😂

Use etching primer before you paint it.. it will help tye paint stay on..

Reliant regal 👍

In formula One Aerodynamics is everything, Maybe the tyres are falling to pieces because the wheels are not stable on the ground. At 200mph there is so much air the car has to push through you need good aerodynamics to keep the car balanced.

Sounds explosive! Plenty of cool stuff yes👍👍

Amazing video

Nice catch up video, chaos and mayhem! 😆

If u don't already have it the legendary sonic and legend are pretty good too. For the money they really last at the skate park too

I'd recommend rust-oleum 500 engine paint. Seems to be more durable than any other paint. Just looking out for ya Kev lol. I have to say you have some of the best rc vids on KZread!

i kinda miss your original gang...hope to see them in your future videos...nice location though in the Isle of Man👍

KEV! I recon u should do more FPV drone vids maybe get on that has the 03 air unit this time see how u like it! Love the vids keep it up!

maybe try honeycomb cardboard with a rubber tire around the carboard and a plastic thingy in the middle to connect the tires(just a idea for the tires)

Kev, use etch primer and paint will stick just fine. Keep up the good work man!

204MPH on the sausage is pretty fast. You could try treading the foam on the wheels it could help, not sure though 🤷‍♂️

LOTS OF FUN COMING UP FOR SURE!!!

Hey Kev you should try to have some rubber tires made with KEVLAR braided belting and aluminum dish wheels for the sausage.

I think I have a solution, you can try line-x substance to make the speed sausage wheels stronger.

Can’t wait to see more of your other hobbies

Cannot wait to see the plane Video kev, stay safe mate👍

Nice !

Hope we don't have to wait to long for the review for the rc4wd Miller Motorsports rock bouncer. Been looking at that truck.

@KevinTalbotTV

Ай бұрын

Video on main channel dude

That's some good driving and crashing

hi kev, has any one in the RC world tried using poly bushes(those big ones used on car sub frame bushings) for rc land speed tyres/wheels, you can get diffrent compond types of bushings, soft to hard. would need some one with a lathe to turn them down to size. any ways just a thought. would make a nice lil bit of destructive testing content.

You may want to go with larger wheels so that they spin slower at 204 mph. Not sure how the math works out though, but if they spin slower then rubber weight becomes less of an issue

Do a full Vitavon UDR mod and BASH IT!!!

I don't know what RC car or RC truck it'll be but I definitely see one RC going in that big hole eventually.

I can’t wait for the Avante video 😊

I love this hell 😅

always good to see u Kev ❤❤

Kev could you please do a bash video on a tmaxx3.3, this was my first and all time favorite rc, have a good one buddy

Did you ever think about machining hockey pucks for wheels ? The size is about the same and it's pretty hard rubber.

Just suggestion ... About the wheels... What about if you modify Skateboard wheels... you have a small lathe

Yap yap yap 😂❤

It seems the problem with the wheels on the sausage (and all speed cars) is the use of an additional glued-on 'tyre' surface - ie, foam, etc. Is there a way to avoid this weak link by doing away with a 'tyre' as such? So the wheel was just one solid material that incorporated a running surface?

Build a titanium 2.5" diameter by 3/8" wide wheel with a urethane bonded tire. Light weights and indestructible.

I will pray for you to be safe when flying.🙏🙏

How about solid rubber wheels? 6sreliant Robbin! Madness. 😂😂

You could cut circles out of an old tire and stack the rubber to the desired width. glue it together with shoe glue. It won't fly apart.

@MidwestFarmToys

Ай бұрын

Actually a good idea tho you'd have to have a lathe to get them perfectly round

Kev could you please do a bash video on a tmaxx3.3, this was my first and all time favorite rc, have a good one

Hey kev, I know it’s not much of a comparison but you should do a losi lmt vs smt10 video

Anther cool video

Larger diameter wheels, 10mm wide, 15-20cm diameter, rubber tyres. The rubber will suffer less from centrifugal/centripetal forces on a larger diameter wheel. Will require upside down 🤔 portal type axles?

What about jet engine and skid plates for wheels? They won't blow apart lol

Ohhh it's Christmas everyday

Maybe try raising the rear end ever so slightly higher than the front end ?

Nice 😄

Can’t wait to see the 3 years in the making video. I hope it’s long

Can't wait for the Raffall tonight slash maxx is mine haha

With the speed cars, I feel like everything that gives downforce to the car cannot effect the chassis(no squad or minimum squad). Just like the serpents cars. The body and the wing should be connected to the car as close to the wheels as possibly. Most get unstable with higher speed because the airo changes with squad

Excited for sledge video

Hey Kev. For your speed wheels issues, did you consider skateboard wheels? They are rubber, and they are heavy, but the silicone they're made of seems pretty tough. Maybe they can hold up.