Just what I needed to watch, now I can change the oil in my scooter.

@ManCaveMayhem

5 жыл бұрын

Edward Vailliencourt Thanks for the kind word. Glad we could help👍🏻

A tip I was given when dealing with transmissions on cars is to open the filler bolt first, then you won't panic after emptying the old oil when you realise that you cant refill it!! cheers from the uk

@ManCaveMayhem

4 жыл бұрын

pablo123b 🤣 that’s great advice! Thanks for watching and ride safe my friend!

@pablo123b

4 жыл бұрын

@@ManCaveMayhem your very welcome, merry Christmas and ride safe too

Those two threaded holes above and below the bearing on the cover... run some 3-4" long M10 (I think they're M10) bolts through those... the cover will pop right off. It pushes on the bell housing. You're welcome :D

@jkro30a

2 жыл бұрын

Good comment...It's M8 1.25/50 bolts. And you're right that they pop it right off. In case people don't know, you screw them in to the point where they stop then you turn them 1/2 turn each, to keep the pressure even, until they pop the cover off. Works like a charm.

@sethh8892

Жыл бұрын

​@@jkro30a they should have just made a fill bolt accessible from the outside... instead of putting the fill port on the inside of the cover casing.

Watching from the UK here Guys, not just watching but very much enjoying, LOVE this video..Its such a shame that the main drive covers need to all come off to access just one filler point, shame it cant be external to cut down on Labour time...Well done Guys for the Video....

@ManCaveMayhem

4 жыл бұрын

keith4usa1 I’m glad we could help. Thanks for the kind words. Ride safe my friend 😎👍🏻

Hello, i m looking all your video from Reunion Island. Thank you very much. I m looking for the video: Change: 1) Bobine (ignition coils) 2) change regulator 3) change stator Of you have it😮😮😮😊😊😊

awesome duo!

Thank you for the video.

@ManCaveMayhem

5 жыл бұрын

C Winegarden I’m glad I could help. Thanks for the kind words👍🏻

Once again you make it look too easy. Good vid.

@ManCaveMayhem

6 жыл бұрын

Blood Eagle thank you sir, it felt like getting I was getting my teeth pulled 😂

@Empowered-ltc

6 жыл бұрын

Hahahaha. Well at least you have him there to aggravate you. I’m “Man-Solo”. Hahahaha

Great! Thanks!

@ManCaveMayhem

5 жыл бұрын

Guzzi venture Glad we could help. Thanks for your kind words!

Man, the engineers really could have thought of an easier way to do this... Like, an accessible Bolt for the fill port... Jesus. There isn't a single scooter built today that makes sense.

@ManCaveMayhem

Жыл бұрын

I know it is crazy how they engineer those damn things!

Very good bros.

@ManCaveMayhem

2 жыл бұрын

Thanks my friend I hope it helped!

You remind me of Sammy Hagar. I mean that in the most positive way! Cheers!

That cover was tough for me on first try. After that no problem.

Hey fellows I have a question for you. I have a burgman 400 2012 and having a issue with the my bolt placement. My problem was I didnt mark them when I removed them and needed some help

Question for you. I have a 2005 Burgman 400 and need to replace emergency brake cable. Tried lubing it but it is frozen. Wonder if I needed to pull tupperware off under the glove box or take the front tupperware off to get to it?

@ManCaveMayhem

3 жыл бұрын

Yes we had to👍🏻🇺🇸

@almikelipscomb

3 жыл бұрын

@@ManCaveMayhem Glove box only or both?

@anthonyellsmore4532

6 ай бұрын

🤣 Tupperware...never heard that before

Is the slapping in the cvt cover sound normal. Just bought an 09.

@ManCaveMayhem

Ай бұрын

They actually do make a unique sound when you accelerate kind of a chugging sound that’s the CVT

Why is the clutch housing blueish? Factory tempered or friction from the clutch ?

@ManCaveMayhem

6 жыл бұрын

Pierre Lachance it looked like it was bluing from the machining, but I’m not sure. We checked the clutch and it was fine.

@seadog915

4 жыл бұрын

I was curious about that also...

Why don't you simply cut a hole in the cover housing (that lines up with the fill bolt)? You'll need an oil can to fill it. And yes, you can put the piece you cut out back in place - like with duck tape

@ManCaveMayhem

2 жыл бұрын

That’s another way to do it. Good idea👍🏻

Damn all those screws and fasteners, think of all the time it would save if the manufacture didn't even use them as well as you guys not complaining about it!

@ManCaveMayhem

4 жыл бұрын

yagabagadaga Y What bolts are you referring to?

Would this work for a 2004?

@ManCaveMayhem

3 жыл бұрын

This should be similar if not the same.

Can I use the same Rotella t6 5-40 diesel for this?

@ManCaveMayhem

Жыл бұрын

No, there’s a specific girl you use and I’m not sure the weight on that

@JoseOrtega-xn4mj

Жыл бұрын

@@ManCaveMayhem thanks 🙏

@ManCaveMayhem

Жыл бұрын

@@JoseOrtega-xn4mj anytime my friend👍🏻

Hi what oil you use for trasmissio? pleeas

@ManCaveMayhem

2 жыл бұрын

10w/40 motor oil.

@jeanmartinez6405

2 жыл бұрын

@@ManCaveMayhem no for motor is for transmisión?

@ManCaveMayhem

2 жыл бұрын

@@jeanmartinez6405 Yes the transmission takes motor oil

@jeanmartinez6405

2 жыл бұрын

@@ManCaveMayhem really? I no want broken my transmision got burgman 400 2010 i need change tramission oil

@ManCaveMayhem

2 жыл бұрын

@@jeanmartinez6405 If you don’t believe me then go on the Internet and research it.

I am a bit disappointed with this video. I bet the best part was removing the humungous cover. I did that once and was looking for a better way to take it off. I guess, short of using a sledge hammer and 2x4, and lots of newly invented curse words, everyone eventually succeeds. Took me 2 hours. You must have done a lot of editing ! Thanks anyway. Your objective was achieved.

Its horrible working on goddam burgs with all that plastic and doubly horrible without a lifter. Good luck!