Hmm I think I’ll go with a ww1 gas hood

@Weaponsandstuff93

6 жыл бұрын

That won't do anything to protect you.

@mynameisanonymous8518

6 жыл бұрын

Weaponsandstuff93 oh okay

@mynameisanonymous8518

6 жыл бұрын

Weaponsandstuff93 I know that they’re pretty much useless but they look kind of cool

@Zurgo-fl1kx

5 жыл бұрын

@@mynameisanonymous8518 AIEEEEE THE WIND TURNED!!!

@eurasianlynx5584

5 жыл бұрын

@@Zurgo-fl1kx big oof

The cheek filters were made to avoid the canister getting in the way of firing a rifle. Cheek filter mask clones are still good for biological.

@sentaukrai

4 жыл бұрын

Duel filter masks have the bonus of being able to add a second filter making it easier to replace them in field. Otherwise you'd have to hold you're breath while swapping them out.

@joewright6764

4 жыл бұрын

SEALED NBC M10M FILTERS FROM 1988? DO YOU THINK THEY COULD PROTECT AGAINST CORONA VIRUS?

@jaxsmith1544

4 жыл бұрын

I have the same filters they should work cause the particulate part of the filter should still work don’t put them in the mask if there leaking charcoal

@banjobill8420

4 жыл бұрын

That's not the problem, it's that you have to take the mask off to switch out the filter

@gbobzburner8687

4 жыл бұрын

@@banjobill8420 Small price to pay, in my opinion. And it depends on what you need most. I need a mask, I'll take any over nothing. And without the port for a straw, you have to take the mask off to drink, eat etc.

Harbor freight respirator and pool goggles gang who up

@nightwolfcovers3574

3 жыл бұрын

Right here

@penguino8185

3 жыл бұрын

Same

@StavidSlash

3 жыл бұрын

Yes

I want to get a GP-7 gas mask, and then walk up to people, knock a soda can off a counter and tell them to pick it up.

@bixbyfamily5682

4 жыл бұрын

Jack P. Richardson Then “Freeman” throws it back at you and u chase him to the train.

@Alffraido

4 жыл бұрын

Jack P. Richardson you do know GP7 gas masks have their filters on the cheek you would want a modern military gas mask and just cover the filter inlets

@jackp.richardson6415

4 жыл бұрын

@@Alffraido Someone never played Half Life 2 before

@kirkchester6693

4 жыл бұрын

Jack P. Richardson agreed. But for real, you gonna pick up the can?

@jackp.richardson6415

4 жыл бұрын

@@kirkchester6693 *Pick up that can* *Now put it in the trash can* *Alright, you can go* *Hehehe*

Most preppers are kidding them selves in regards to masks anyway...like you have said,the filters have a 10 yr shelf life and the actual rubber masks are scrapped as U S after a maximum of 20yrs(the last 10yrs training only).then you come to nbc suits that are only good for 10years lol...the only practical use a prepper could expect to live long enough to don one would be against tear gas as you have said....real nbc attacks would kill em dead...the lads in gulf 1 had to wear the suits all the time because they wouldnt have got them on in time when the siren went...best advice would be for preppers to buy NEW industrial filters as they are avalible and would work the same for tear gas and more likely encountered industrial accidents

@Weaponsandstuff93

7 жыл бұрын

+tumbo1984 Yeah apart from riot agents and maybe chlorine gas, your chances are so low against nerve gas etc there's not much point trying, I suppose a mask might protect you from an airborne disease though.

@tumbo1984

7 жыл бұрын

Weaponsandstuff93 its certainly better than nothing mate...my rant was aimed more at newb preppers that think a noddy suit and mask from the 80's would see um good for a weeks camping in Pripyat lol

@Weaponsandstuff93

7 жыл бұрын

+tumbo1984 That's ignoring having no lead shielding against the gamma rays. Might be a good idea to do a video on what a mask and NBC suit can and can't protect you from. I'll do that after I finish my Redback video.

@tumbo1984

7 жыл бұрын

Weaponsandstuff93 sounds good liam

@Zurgo-fl1kx

5 жыл бұрын

Id still wear one :), they look cool.

Coronavirus happens and this is in my recommended now, thanks KZread!

@MrGOLDENCUPCAKE1

4 жыл бұрын

@ET Hardcorgamer ye I'm getting fed up with blasting my ass with the massage setting on the shower head

@arieheath7773

4 жыл бұрын

a macdonald Thankfully I ordered a bidet recently. Makes it a lot easier to use less toilet paper.

@BoogieBombfr

4 жыл бұрын

Same here

Great video, great idea doing this mate, it should help lots of people choose what to get, to be honest most people including myself don't have a clue whats good, dangerous or worth getting.

@Weaponsandstuff93

7 жыл бұрын

Yeah, Tumbo's comments are very realistic, even when you know what you're doing, if anything major happened you're screwed anyway due to how deadly the gas is, it's like if you lived in a major city and it got nuked. That being said a mask in good condition with a working filter can protect you from a lot of other stuff like, tear gas, lower threat chemical weapons such as chlorine gas, airborne viruses and industrial disasters.

@stevewilliams2895

5 жыл бұрын

the FM12 is a very good mask. usually police issued but the police almost never use gas mask

@shannonlewis1737

3 жыл бұрын

@@stevewilliams2895 only really riots

thanks dude,so awesome to have you share all your knowledge,you are a treasure!

these 8 dislikes were like: *OH! A GAS MASK VIDEO! I DONT LIKE GAS MASKS SO IM GONNA TURN IT ON AND GIVE A DISLIKE!!!*

@Weaponsandstuff93

6 жыл бұрын

Pretty much.

@maxthentfofficer4773

6 жыл бұрын

dude guess what...i asked my mom to get me gas mask for Christmas (Avon-S10) now lets wait for Christmas

@Weaponsandstuff93

6 жыл бұрын

Good luck.

@annoymus2066

6 жыл бұрын

Max The NTF Officer I hate u h

@shinminmetroskyline

6 жыл бұрын

nah, they were all Dr Who fans

Avoid cheek filter masks Looks at my cheek filter mask in the corner

Late to the party, but I bought a GP-5 a year back on a school trip to Berlin, and I've been getting into gasmaks through your videos. In terms of storage for the old filters, I didn't get a cap for the old filter that came with the mask, is it fine to store it open or have I subjected myself to asbestos poisoning or what?

@Weaponsandstuff93

4 жыл бұрын

Nah you can store it open, it's not going to magically fall apart and leak

@kampfkartoffel8994

Жыл бұрын

Mine just broke

This video was made ahead of its time

These are going to be the only kind of videos in a apocalypse

Well I have a Romanian military grade gas mask and I'm not sure how good they are since their design is a bit different from these shown in the video, the tube filter is a bit bigger than these ones and it also has another filter right on top of the tube filter . could you help me with this question? Thanks.

Hey, what army surplus stores do you recommend in the UK or in the EU in general?

Great video, very informative! Thanks! :)

@Weaponsandstuff93

7 жыл бұрын

Thank you.

Even though the cheek filter masks are hard to get filters for can they still be used if have more modern filters?

Had to wear the US gas mask in the 80s. Had to have stupid eyeglass inserts to see. Then I was always P---d off wearing it because the mask crushed my face squeezing it hard. As for the charcoal, how can it go bad unless it is unsealed to let in moisture and stuff?

I got the cheek filter mask on the left (pbf) and both the 40 mm (gp5 and fm12) I love my fm12

I've got a Canadian C3 that's had a non-removable 40mm adaptor factory-fitted, I'm not sure when Canada started conforming to the NATO standard but should I trust this over a mask designed with fittings to accept 40mm filters? Do you know anything about this particular case?

@Weaponsandstuff93

7 жыл бұрын

As long as the seals inside the mask haven't degraded it will work as well as any other 40mm mask.

I own a czech m10m, I use it as a book stop. Does it's job very well

Me and the boys going out during quarantine

I had a british C3 but i lost it DX I replaced it with a cheek filter style mask. It almost looks like the one you czech one you showed . My idea was to remove the cheek filters and replace them with a tube that conects to a filter tank. I think the biggest chalange is to find a adapter that fits perfect with the mask so that there is no leak.

@Weaponsandstuff93

6 жыл бұрын

It would be safer and easier just to get a 40mm mask in all honesty.

@Rubycon99

5 жыл бұрын

@@Weaponsandstuff93 I can't understand why people want to try all these sketchy sort of workarounds when it comes to a piece of safety equipment

@sidewyndersshed1676

4 жыл бұрын

What about getting an M25-A1 tankers mask (or equivalent)? They were designed to be used with a filter, or be plugged into a vehicles filtration system.

Great info. Thanks.

I´ve got a GP-5 myself, but i sealed the filter after 1 use a fire at home broke out, cuz then i heared that there was asbestos in them, was quite not cool to hear that.

Great information, you really gotta appreciate this channel if you're a gas mask enthusiast

@Weaponsandstuff93

5 жыл бұрын

Cheers

This is really relevant now

Would you recommend a Polish/Soviet MC-1 gas mask? I've seen a lot of deals on them and was wondering if it was actually a reliable mask.

@Weaponsandstuff93

5 жыл бұрын

They're surprisingly tough for how cheap they are.

@bayle3942

2 жыл бұрын

uses GOST, so if you're willing to spend extra money on just shipping alone, you can buy modern GOST Filters from Russia

Cool video thanks for sharing and caring.

@Weaponsandstuff93

6 жыл бұрын

Thank you.

So I have the gas mask m10m and I have it "Brand new" but I saw that there are no filters in it. So, can I somehow fit the filters inside the mask (I didnt fully get it how to put them in)?

My “newest” 60mm filter was dated July of 1992

nice information...great job...

@Weaponsandstuff93

6 жыл бұрын

Thanks

What about a non issued still sealed Respirator Gas Mask Forsheda NBC F2 A4 Civilian Gas mask from 94?

Y have EO-19 yes the cartrige are inside the filters of the PBF are meant to last as long as 24 hours, depending on the level of air contamination so playne time to change

Where can I get filters for a polish mc-1 mask

The Chez m10m has a 33mm check threads if you could make (3d print) a 33mm to 40mm adapters you can have a great mask the rubber is flexible and still like new and they cost only 10 dollars verses 200 to 500 for the others.

What 40mm filter can I buy for a polish mp5 to stop teargas primarily?

Good video and well said

@Weaponsandstuff93

7 жыл бұрын

+planes124 Cheers.

I have a GP5 and want a GP7v because the filters get covered in condensation and its all icky and gross and GP7v masks you can have a drinking thingy attached so its okay to keep on and drink

Are there any you recommend for 8 hour+ usage Are the TF-1 capable comfortably in an air-conditioned environment?

@Weaponsandstuff93

4 жыл бұрын

TF-1 will probably feel very sticky and sweaty after an hour or so of use. Most full face respirators are not comfortable for long periods unfortunately.

just wondering I live in the US but I was wondering if you had any suggestions on where to get an S10 gas mask that would be in working order?

@NEHappyCamper

4 жыл бұрын

the s10 is way out dated, by the time doomsday is here the mask will be a pile of dry rot.

I had a yugoslavian mc1 gasmask with a 60mm filter, just for the coolness. I later got into prepping etc and was planning on getting some more filters. Recently I removed it from its bag and the filter came off. I thought it must have come loose and went to screw it back in. I then noticed that the thread had been ripped off the mask. Upon closer inspection the rubber where the thread once sat was still maleable and tacky to the touch like the rubber didn't set properly. such a shame but in all honesty it wasn't the most comfortable mask plus the texture inside makes your skin itch. Im kind of glad it broke now than when i needed it. I was planning an upgrade and got a 1982 british s6 that is in unused condition. Absolutely spotless inside and out (apart from the usual fluff etc) with no signs of cracking etc, gave it a good soak. it seals well etc I was just wondering whether it would be safe to rely on or whether it would be better to get something newer like an s10 or gsr.

@Weaponsandstuff93

4 жыл бұрын

Interesting you had the M1 melting problem as quite a few people have reported it.

@dahotrod1533

4 жыл бұрын

@@Weaponsandstuff93 it was kept in a dark cool place so it must have been a chemical reaction to the metal thread/ intake valve

I'm getting a gp5 but I'm not gonna use the filter that comes with it because it's old and might have asbestos. What filter should I use?

@Weaponsandstuff93

7 жыл бұрын

Any modern Russian or Polish filter.

i have the m10m and am getting the polish civilian mask mc-17

we salute you

Definitely get modern filters

I love the gp5, shame it's not particularly comfortable. Really good information!

@Weaponsandstuff93

7 жыл бұрын

I don't find it too bad but I have my hair off a lot so it doesn't pull at anything. It's more comfortable than the Russian M41 military versions, they're thicker rubber, which is better but it compresses against your face even more.

@mindymcgrath1632

7 жыл бұрын

me to

@slightlyamusedblackkidfrom9153

6 жыл бұрын

id rather be uncomfortable than choke to death on poisonous gas lul

@jamiedown7138

6 жыл бұрын

Hey do you know where you could find a seal or if you can repair one

@Alffraido

4 жыл бұрын

Khoros Mythos and the filter gets covered in condensation ewwwww

Is it ok to add a 3m particulate material to the old Russian canister and mask?...like your previous video?

@Weaponsandstuff93

4 жыл бұрын

Yes better than not using it but bear in mind it makes the breathing resistance harder.

You cannot screw gost and mato threads interchangeably, it will damage the thread and most likely wont seal

Keep up the good work

@Weaponsandstuff93

6 жыл бұрын

Thanks.

Some people had M10 mask with filters outside.

I uss a old gp5,i love the fear Factor it would give anyone else around

Love this channel. Liked and subbed.

@Weaponsandstuff93

6 жыл бұрын

Cheers.

Man can’t wait to get my artyom cosplay underway

@Weaponsandstuff93

4 жыл бұрын

Cool

5:05 the gas mask on the right , I have it but what’s the filter to it called or where would I get one

@SW-ii5gg

3 жыл бұрын

40 mm NATO.

i have a m10m and a GP-5

Guys! You can buy 60mm to 40mm NATO adapters!!! (Can you make a video on that Mr.Weaponsandstuff93?)

Interesting video, but my question is how were you able to test the masks against tear gas?

@Weaponsandstuff93

4 жыл бұрын

I didn't but tear gas is simply a particulate like dust, some aerosols etc

I don't know why but I just like the look of the gp5

@notlizard5797

3 жыл бұрын

Same

So you are saying that we have to avoid cheek filter gas masks. But, if i want to buy a m10m for decorational purposes?

@Weaponsandstuff93

5 жыл бұрын

If you want it for a costume it's fine, it's just not practical anymore for serious use.

that's a good video right there.

@Weaponsandstuff93

7 жыл бұрын

+Ray Feltz Thank you.

i have mc1 and i have a unused filther :D should i buy filther conventer?

@Weaponsandstuff93

7 жыл бұрын

Yes as you can't get 60mm filters that are still in date.

Would the charcoal or any other chemical compound inside the PBF gas mask filter be any effective at all? Would the protective agent be expired or depleted?

@Weaponsandstuff93

7 жыл бұрын

+OfficialMINIm The charcoal will probably be useless or fully expire soon after opening, the filter should still provide protection from tear gas however, but the filter may contain asbestos, so use caution.

@OfficialMINIm

7 жыл бұрын

Weaponsandstuff93 thank you

@jeffkardosjr.3825

6 жыл бұрын

I had a Finnish filter work fine against complex non organic fragrences. But this is my personal experience.

At one time the IDF mask was the one to look for. Can you comment on that and if you has a choice what would you look for?

@Weaponsandstuff93

4 жыл бұрын

Depends entirely on your price range the Israeli masks are still good but often currently it's cheaper and easier to buy good industrial respirators etc from hardware suppliers

Would you recommend the SGE 400/3 ?

@Weaponsandstuff93

7 жыл бұрын

+kittensofdeath Never actually seen one but it's expensive for what it is.

@1brytol

2 жыл бұрын

It's tooo fuckin expensive

Aren't 60 MM's common online with a seal?

Where do you get your 40mm filters? I can only find 1990s ones

@autisticANDarmed

2 жыл бұрын

If you don't mind paying $50 a filter, try canadian preparedness. They are new and totally sealed 40mm CBRN filters with a 5 year shelf life.

Yoy can buy adaptor for 60 millimeter masks to 40 millimeter so its fine. It can still make a airtight seal

i'd suggest canister filters (NOT THE SOVIET ONES OR ANY OTHER CANISTER THAT CONTAINS ASBESTOS) and particle filters

@Weaponsandstuff93

5 жыл бұрын

Yes modern 40mm ABEK2P3 filters etc

Isnt the Israeli filter charcoal, whatbdoes charcoal keep from

I got the gas mask to the right at the beginning of the video Would recommend if you’re trying to gas out your neighbors and survive

Gp5 is my fav to I found it in my garage

@Weaponsandstuff93

6 жыл бұрын

Don't use the filter!

there is also an m10 to 40mm adapter. I 3d printed mine and it works and passes a suction test.

@Weaponsandstuff93

4 жыл бұрын

Cool

One question once the filter starts to be used how long can you use it for?

@Weaponsandstuff93

6 жыл бұрын

+Dr_Dacosta I've done videos on that but there isn't a straightforward answer.

@SonsOfLorgar

4 жыл бұрын

If you start smell anything through the filter and have tested that the mask seals properly to your face, then the filter is letting particles through, hold your breath and swap filters asap. Also if you notice that the mask is sucked in towards your face as you breathe in without blocking the filter intake, then the filter is almost saturated and needs replacing, but it's less urgent than if you smell something other than rubber and sweat.

Hey man I just got a israeli civilian gas mask, what filters would you recomend (link preferably)

@Weaponsandstuff93

7 жыл бұрын

Either Israeli filters or Avon filters, look for listings that show the expiry date.

@Live2Win230

7 жыл бұрын

Weaponsandstuff93 ok thank you

Are there any models you would recommend for someone who requires glasses?

@Weaponsandstuff93

6 жыл бұрын

I think both the Israeli masks have a glasses attachment point, but you'd need specialist glasses to attach to the mask.

@justusmannion4344

6 жыл бұрын

Weaponsandstuff93 okay, thank you for the info

lol the gas mask on the right in the thumbnail looks a bit to non wide.

Does anyone know if there are gost to stanag adapters or something like that

@Weaponsandstuff93

6 жыл бұрын

Doesn't exist.

Great video

@Weaponsandstuff93

7 жыл бұрын

+George AR15 Cheers.

You said the polish mp4 mask you cannot get filters for funny thing on budk they sell the filters for $10 Usd. So im gonna call shenanigans also they can use external filters if you get the correct ones which i have purchased in the past and they work wonerfully.

Do any type of s10 canisters have asbestos in them

@j.j.6471

4 жыл бұрын

No I don't think so. Most asbestos filled canisters are the ones dated before 1972 although, some canisters have small traces of asbestos, but if you're worried about asbestos in masks you've breathed, get an x-ray. But asbestos canisters shouldn't be a big threat.

The gas mask on the right at 1:20 is the sort i have

I have a 40 mil adapter for my c3 so I think I’ll be good

can you do a video on the m74 romanian gas mask?

@Weaponsandstuff93

6 жыл бұрын

No as I don't have one.

Oh, So much true in this vid. But simce am playing Stalker LARPs and since am in Czech rep. I have M10m mask at home BUT it has one advatage, you can drink with IT

@Weaponsandstuff93

6 жыл бұрын

Most modern masks also have drinking systems, but as the M10m was a copy of the US M17A2, it was a fairly early Eastern European mask to include a drinking system.

@jonasprusek4511

6 жыл бұрын

Weaponsandstuff93 True, true, but M10m cost ~7$ in Czech rep. And for running around without filters, I think its good and cheap option

I was wondering what's the difference with the "normal" GP5 and the version with the long hose, or whatever it's called

@Weaponsandstuff93

6 жыл бұрын

The GP-5 can take either a hose or filter, the version with the hose and the small coffee can filters may have been for civil defence workers.

@invincicool6905

6 жыл бұрын

one more question, for toxic gases that can leave rashes and mess with your skin, what would be a good full body protection to use

@Weaponsandstuff93

6 жыл бұрын

Full body rain gear or proper CBRN suits.

4:05 wait what 😳

@lordofcheese69

3 жыл бұрын

wha do you mean wait what?

CoronaVirus fear bought me here

@tex8564

4 жыл бұрын

as some one who almost ran out of Toilet paper before I could get more..... ,I'm a Jagdpanzer God damnit..... And I hate you"

How bad are GP-7 filters or are they basically the same as GP-5 ones?

@Weaponsandstuff93

5 жыл бұрын

Safer than GP5 filters simply because they have a proper particulate filter at the top.

@grizzlyflaps7949

5 жыл бұрын

Weaponsandstuff93 so it’s fine if I wear a GP-7 one

Does anyone know if the GP5 Russian gas mask will protect you from asbestos, the mask is with a new nato filter not an old Russian one.

@Weaponsandstuff93

7 жыл бұрын

Yes, assuming you have a good particulate filter installed to the mask.

What do you think about the fm12

@Weaponsandstuff93

5 жыл бұрын

An excellent mask.

Where do you get the Avon mask?

@SW-ii5gg

3 жыл бұрын

The Avon lady.

Where can I get the polish fp5 filter for the gp5 mask cheaply?,

@Weaponsandstuff93

4 жыл бұрын

ebay, also look for the older MASKPOL FP-211 filter as all of those seem to be GOST unlike the FP-5 filters where it seems it depends on manufacture dates.

@fredyyfredfreddy

4 жыл бұрын

@@Weaponsandstuff93 Thank you

Does the Russian PMK2 use GOST filters?

@Weaponsandstuff93

6 жыл бұрын

+JustQinn Yes but I think PMK 3 uses proprietary filters.

Actually theres one thing that is cool about the first type of masks - they are cheap as dirt in my country. And filters are cheap too. I just wonder how long can i use them wihout changing filter... Hour? Half hour? If its about hour then i think its pretty reasonable to get one if its really cheap and you only plan to stay in home and dont really walk out too much

@ghostproest3022

4 жыл бұрын

Generally filters last anywhere from 10 to 24 hours depends on the circumstances and what kind of agents were used

where'd you get an M61 filter for £1.50, I usually see them on ebay for about £6

@Weaponsandstuff93

6 жыл бұрын

An Army surplus store that used to be a few miles from where I live.

@soppo6446

6 жыл бұрын

Any places you know of that sell filters in the East Anglia area, I looked at a few army surplus stores but they didn't seem to have any filters

@charlie91757

4 жыл бұрын

@@Weaponsandstuff93 I was at a mini police roit in London and yes that mask will filter out tear gas

I got two m10m one works and one don't but still got except like said the chick filter

@liammillard9709

Жыл бұрын

Check filter

the filters for our czechoslovakia m10 gas mask, at czech shops we still have them and they are really cheap like 40 czech crowns (1.30e) something around that :D

@firestorm165

4 жыл бұрын

Surplus or factory fresh? Might be a good idea to grab a few considering the current state of affairs

@tomasstrnad7943

4 жыл бұрын

@@firestorm165 they Are vacuum sealed from the time the were made with the masks, but i would rather a new ones

@firestorm165

4 жыл бұрын

@@tomasstrnad7943 agreed. Take care of yourself, I hope to move to the Czech Republic when this is all over

@tomasstrnad7943

4 жыл бұрын

@@firestorm165 when its gonna be all over, it should be no problem :)

Weopens and stuff now only needs a nuclear bunker

@veikkajoensuu

4 жыл бұрын

And a nuclear acopalypse

@Alffraido

4 жыл бұрын

unknown russian xa xa xa very true

Frick got the 40mm filter But it's *probably* just for decoration

@Weaponsandstuff93

6 жыл бұрын

Just use it for decoration.