Your vids are extremely helpful! I'll be doing an A2A S/C install on my AWD G37 Coupe pretty soon, been looking all over for helpful info and your series is pretty much the best! Thanks!

@thecarizon504

3 жыл бұрын

Thank you!!! I'm glad the series has been helpful!

Real honest videos. I am also exploring the LS3 swap as well.

love it! great numbers, hard work pays off! keep it coming.

does the tune control torque numbers as well? looking at buying a 370 already supercharged it makes just over 500hp but the torque is at 490 and im worried its a little high but unsure if this is something i can get retuned or how it really all works

I'm totally lost on what to do with my kit. I was able to get a steal on a used (but completely rebuilt with the new Si impeller) Stillen supercharger, brand new Soho A2A conversion, complete ZSpeed clutch system, CMAK, 1050IDX injectors, a Walbro 450 pump, two pulleys, and some other small stuff for $6,500. I now don't know what parts I'm missing, as a few got lost when removing it from the other car.

@ThatRedNismo

2 жыл бұрын

Things are coming together now. I was missing the main belt (#k071054), but I had the supercharger belt (#8pk562).

Im really blown away with this build man🤯 for the engine to hold 500+hp at a decent tune makes me feel hopeful for mine. I'm so happy for you, so inspiring! I wish the chicago winter ends soon so i can get back to my build.

@thecarizon504

3 жыл бұрын

I'm excited for ya! Let me know how it goesbwhen you get around to it. It's been a dream of mime for a long time!

why dyno without the pre filters if you can't run without them?

6:26 is why we do it. Nice videos and content. Love from Bulgaria!

Great informative vid. Did you ever figure out the belt slip issue?

No ads!!!,keep up the great work

@thecarizon504

3 жыл бұрын

Haha, I have been monetizing after the first ~24hrs of a video being up so subs watching it the first day don't see ads.

Did you wrap your headers? I'm going to install ISR LTH this spring and am on the fence on wrapping them. Would you recommend it?

@thecarizon504

3 жыл бұрын

I wouldn't bother. It's a fun project but the wrap, at least the stuff I used, frays and comes apart over time. Especially when you rub on it while working on something else.

That smile on your face tells me everything brother. Gotta love it!

hey man what kind of front bumper is that ? And did you have to buy the led’s separately? I got a ‘13 and don’t wanna lose my led’s

@jrboostin

3 жыл бұрын

Nismo

How are you changing the PSI on the supercharger in the different tunes? Isn’t it belt driven? Aren’t you locked into a PSI based on pulley size? Is this just the fact that it can’t make as much boost with all those filters?

@thecarizon504

2 жыл бұрын

The filters are restrictive, that's causing the psi drop.

Hey man, to gain these numbers is the kit alone enough with a reasonable exhaust? Or do you think long tube headers would be needed? Let me know man thanks!

@thecarizon504

3 жыл бұрын

Would definitely at a minimum run high flow cats.

There is a map which pulls timing when the knock strength gets too high. Losing so much horse power is a clear indication of the restrictive pre-filters.

I remember you man your the guy that did one of my favorite video a while ago explaining the differences between Turbos v Superchargers

@thecarizon504

3 жыл бұрын

Haha that's me! Welcome back!

Well done! I received my kit and fuel return system from Aaron on Thursday! The other supporting equipment arrived earlier. I am scheduled to drop the car off at Dynosty in early March. I am very excited, will be running flex fuel, and also will be running a conservative tune. On e85, I am shooting for low 600s. In Chicago, I'll also run two different sets of tires for summer and winter. I am happy for you and look forward to joing the club.

@thecarizon504

3 жыл бұрын

Nice man! Can't wait to see another member in the forced induction ring. Your build is going to be sick! Best of luck. 💪

@brianjackson5732

2 жыл бұрын

@@thecarizon504 Robert, can you please post the link to the site where you purchased the pre-filters?

@thecarizon504

2 жыл бұрын

@@brianjackson5732 FILTERWEARS Pre-Filter F199K Water Repellent 6.5" Velocity Stack Turbo Horn Cover www.amazon.com/dp/B07F62W3RT/ref=cm_sw_r_apan_glt_fabc_PRN56XDT211GM641G7K1?_encoding=UTF8&psc=1

@brianjackson5732

2 жыл бұрын

@@thecarizon504 As usual, you are the man!

@brianjackson5732

2 жыл бұрын

How are your engine temps? Are you doing anything to manage temps? I'm seeing 220-230 with normal driving.

OK, it's official...............I'm jealous! I have GOT to get me a supercharger system for my 370z! I was looking at the Stillen Supercharger kit for mine. I have to find a local shop in Louisville, KY that can do the modifications and installation. Or ship the car to a reputable installer for the Stillen kit or whatever kit I wind up getting. I want my Z to look totally STOCK on the outside! That's important to me. I like the stock look on my Z. I just want the linier power band of the supercharger. Great video showing the culmination of your journey. You are one lucky man to have that Z you have! Looking forward to your road trip video! I wish I could go with you. My daughter lives in San Francisco. I've been out there several times this year. Beautiful area. West coat trip will be incredible! That's one trip I would love to join your group on!

@thecarizon504

3 жыл бұрын

The stillen kits are good! If you want to shoot for 450whp and above though you will need to consider and a2a kit like topguns or soho.

@joevanseeters2873

3 жыл бұрын

@@thecarizon504 OK Thanks for the information. I'll keep that in mind. I just want my car to look STOCK with the supercharger installed.

@thecarizon504

3 жыл бұрын

@@joevanseeters2873 intercoolersbin the A2A kits definitely don't look stock. The stillen kit would be good for that!

@Dpend84

2 жыл бұрын

Dynosty is in Middletown Louisville and specializes in Z's particularly! Can't go wrong with them!!

@joevanseeters2873

2 жыл бұрын

@@Dpend84 Thanks for the info. I'll have to check them out. I had no idea there was a Z specialist right here in Louisville but I have only lived here for 2 years. Thanks again.

Nice!!!

Congrats bud! I love the build. I am very happy you talked about reliability. It's the most important thing for me, being a modder for so many years. Love the car, if you ever in the northeast - hit me up. I'd like to show you my Roots supercharged Honda. Feel free to check out some of the clips I put up on youtube as well. Keep it going! Subscribed!

Dude nice work its also refreshing to see your honesty because we all fuck up lol most of these youtubers only show the good not the real so hats off to you brotha! Also awesome numbers for pump gas

@thecarizon504

3 жыл бұрын

Appreciate the feedback! I think mistakes are important to share. Just hope people avoid the same mistakes is all.

Congrats brother!! Your car is bad ass!!!

That power curve is immense!

@thecarizon504

3 жыл бұрын

I was happy with it!

You meeting with Eugene will be awesome!

@thecarizon504

3 жыл бұрын

Thanks! Hoping to see his twin turbo kit in person.

Definitely the clutch switch. Just had the same problem and took it off and cleaned it. Haven’t had a single start problem since

@thecarizon504

3 жыл бұрын

Going to replace it here soon. The part's like $20, will put in the new one and clean the old one.

@jaymoody2

3 жыл бұрын

@@thecarizon504 cool! Yeah I just dealt with it for like 6 months and it really was only a 15min fix. Love the built and videos. I’m looking forward to putting a Stillen supercharger on my z and your videos were very informative!! 👍🏾

keep up the great content my dude

Are you running a fuel return system as well? If you are what brand

@thecarizon504

3 жыл бұрын

I am, in a sense. The radium surge tank system I have installed has the fuel pressure regulator built in.

Eugene tuned my Z, hes LEGIT.

Do you have the boost response verses rpm.

@thecarizon504

3 жыл бұрын

I do. I shared this in a previous video, my 2021 plans.

What are these prefilters ×3 he is talking about?

@540TooShorty

3 жыл бұрын

They're like socks that go around the turboguard. The more socks you put on the less your feet can breathe. Same for the supercharger.

Nice man. So I guess that’s what im looking at as well. I’m assuming you have the SI impeller? Do you have the smaller 9lb pulley as well? Good numbers and good you chose Eugene to get you there.

@thecarizon504

3 жыл бұрын

Yep, SI impeller and 9 ib pulley. Power will also come down to how you tune the car. Let me know what you make!

@skinnywhitepipe1

3 жыл бұрын

@@thecarizon504 you also running a return fuel with 1050 ID?

@thecarizon504

3 жыл бұрын

@@skinnywhitepipe1 mods in the description. Yep, I am running fuel return system. It's important to do so for high boost.

Does you car make a funny smell on the dyno too? Mine is fine normally, but when I do a pull I get a funning smell for a little bit then it disappears. Cat less btw.

@thecarizon504

3 жыл бұрын

I don't recall getting any strange smells, could be oil burning perhaps? Does it smoke?

@Malficion

3 жыл бұрын

@@thecarizon504 No smoke

Woow,i wos tinking u will get 550,still great result,i wish ill do my z nismo 550whp,lol

Would this kit fit a 350z Hr?

@thecarizon504

3 жыл бұрын

No, the kit is made for the VQ37

I legit saw you car a few weeks ago in a parking lot one night no joke. I'm in your area lol. Thought damn it looks good. I'm still not sure what I want to do with my 370Z. Love yours though sweet to know it's supercharged too.

@thecarizon504

3 жыл бұрын

Next time you see me say hi! Would love to checkout your build, stock or not!

Looks like from SF, you are taking the I-5 to LA. I recommend you take the 1 or 101 down the coast to LA. It's a little longer but the view the 10xbetter. I-5 is nothing but grassland and cattle.

@thecarizon504

3 жыл бұрын

M M yeah there are some route changes to be made for sure. That was a rough draft of the stops that will be made.

@AdamDoyle

3 жыл бұрын

I did a Dallas, LA, San Francisco, Portland, Denver, Dallas loop in my 370z in 2019 and M M is right about highway 1. However, a part of highway 1 caved in recently near Big Sur so check to make sure it's opened back up before you go.

@drdoomskywalker1731

3 жыл бұрын

Oh hell no. The 105 is riddled with cops. I live in CA and would never recommend that route. Plus it's a lot longer

Congrats smile per gallon @6:27

That smile says everything about the difference. 🎉

great channel bro keep it going

@thecarizon504

3 жыл бұрын

Appreciate the feedback!

sounds sick

On the road trip....if you want to meet in SoCal and see my forged bottom end A2A SC G37 manual coupe, lmk.

@thecarizon504

3 жыл бұрын

I'll be hitting LA along the way!

@lenwerksgt5906

3 жыл бұрын

I'm in OC so I need to know ahead of time since thats about an hour north of where Im at. Just hit me up in advance so I can plan it out.

@thecarizon504

3 жыл бұрын

@@lenwerksgt5906 sounds good man!

I'm just glad you finally washed her!

@thecarizon504

3 жыл бұрын

Hahahaha yeah she was long overdue for a decent shower. 😅

Cool maybe I’ll get to meet you too and see this awesome car.

@thecarizon504

3 жыл бұрын

Let's make it happen!

@erdogg05

3 жыл бұрын

@@thecarizon504 I’m 5 mins from Eugene so definitely possible. I’ll coordinate with Eugene.

What spoiler is that?

@thecarizon504

3 жыл бұрын

EVO - R GT spoiler in honeycomb carbon fiber.

sick car, i wanna make mine like yours 😭

Good job man... 👍

@thecarizon504

3 жыл бұрын

Thank you!

Would this set up be safe for daily driving? Im litreally following ur exact footsteps with a few changes 😂😂

@DjNeighborhood

3 жыл бұрын

me too! 😂😂

@thecarizon504

3 жыл бұрын

Will do a review video in thebfuture but yes, been daily driving it for 4000 miles no real issues. :) As long as you aren't constantly flooring it, depending on how you drive it, you should get a lot of miles out of it.

@ZeroFX32

3 жыл бұрын

Is it possible to make a tune for 87 and 91? Otherwise it will come handy to have some bottles of "octane booster" (not sure if they work) because in some remote areas, sometimes you won't find 93 fuel

@thecarizon504

3 жыл бұрын

@@ZeroFX32 yeah this has been a concern of mine. I need to do some research but I would think as long as the car isn't pushed hard you could get by. Though even at cruising the car is tuned to run 93 and may knock. I think some guys dd on 91 though all the time.

5 hundred and over is a lot that’s great power for that 370z

@thecarizon504

3 жыл бұрын

Definitely, 500whp is more than enough for this car for street use. I'm loving where it's at now.

7:50

Dream setup 😔

Cars is so freaking awesome, but one thing that bugs me is the fact that you have all this money, but can’t get those headlights into black 😞

What year is it? New to the channel

@thecarizon504

2 жыл бұрын

2016!

Torque?

Please do 0- 62 video

isn't that a lot of psi on pump

@thecarizon504

3 жыл бұрын

Yes, that's why you run your AFR richer. Ideally though you should switch to ethanol.

“Oh weeeh!!!!!!”

you ll not run long without filters ... yes more power but ...

@thecarizon504

3 жыл бұрын

Which is why I daily drive with filters on.

I think you should have gone with 650 hp

520 whp and youre on pump gas... imagine you with e85 !

@thecarizon504

3 жыл бұрын

It'll definitely happen at some point!

@ZeroFX32

3 жыл бұрын

@@thecarizon504 could you explain the process of what will you need? Bigger fuel pump, bigger injectors, another tune and what else? I know there's a device that tells you the ethanol content but no idea yet where does it goes, and if anything else (besides tune) is needed. So, like you did with the SC vs Turbo video, you can do a quick video explaining that. I'm sure it will be a great quality video as always

@thecarizon504

3 жыл бұрын

@@ZeroFX32 yeah whenever I decide to get around to upgrading for ethanol I'll definitely film the build.

turbo would make over 600whp

@thecarizon504

3 жыл бұрын

Depends on what turbo, tuning, there's a lot of factors.

@ZeroFX32

3 жыл бұрын

Turbo would need stroker engine to be reliable and three times more money, or even more

@nighthawk0077

3 жыл бұрын

If he wanted that much he would've gone turbo. He only wanted 500-550

Could you please measure 0 to 62 time with some professional equipment, when you have a minute...

@thecarizon504

3 жыл бұрын

I'm slow at launching the car but I would imagine around 4 seconds with a trained professional behind the wheel. I'll do some 0-60 runs at some point!

@yezyk07

3 жыл бұрын

@@thecarizon504 0 to 62🙃

@yezyk07

3 жыл бұрын

@@thecarizon504 Do you have launch control and flat foot shifting features from ecutek??

@thecarizon504

3 жыл бұрын

@@yezyk07 yeah I believe I have these but haven't messed with them yet.

@yezyk07

3 жыл бұрын

@@thecarizon504 flat foot shifting is awesome but not good for the clutch they say Launch control I don't know how to use it most effectively, I cannot figure out correct rpm to launch quickly. Probably I am doing something wrong as always 😁

I made 523whp on 16psi on my single turbo z!! Ig fkarboz33

EK YU TEK? I’m sorry what? ECUTEK is E C U Tech. You know, because your car has an ECU, that’s what the company name is, they work with your cars ECU for tuning.

I want to check your car 😦 what’s your Gmail ?

@thecarizon504

3 жыл бұрын

I do IM's on IG, would prefer you message me there.

@Zherry700

3 жыл бұрын

@@thecarizon504 I’ll do an Instagram ,I’m from garland ,tx hahaha

@admintuning