I would recommend to put a side the clear bowl on the investment vaccum side so you can gain more pressure on the casting side . Great work!!

@drguillotine7485

Жыл бұрын

Yup lesson learned the hard way

can you provide me a list of the tools/materials you used in this video..?

Hi How long did you keep the investment in the klin and what was the temperature before casting and pouring the metal?

Dude! It’s like you went out and bought exactly what I am planning on buying next week.

@drguillotine7485

3 жыл бұрын

Did you buy it yet?

@gordon6029

3 жыл бұрын

@@drguillotine7485 actually I bought a used system. It’s a Percast and the burn out oven is made in South Africa (can’t remember the name). Also go two different wax injectors, one of them is pressure assisted. Have 8 flasks, 50 lbs of investment, a big bag of wax and a vulcanizer press.

@Chris0

3 жыл бұрын

@@gordon6029 how is that setup working out for you?

@jewelryequipmentsupplies6867

2 жыл бұрын

we have this model

@sirsaladbushed4116

Жыл бұрын

Can I do this in a apartment..this setup? In a two bedroom ?

Thanks for the updates. Good job there. Looking forward to the next video

@drguillotine7485

3 жыл бұрын

Just posted a video for cheapest 3D printer for jewelry casting on my channel

@Ghost9er

2 жыл бұрын

Price ? U say cheap where's the prices of those who has a jewelry set up what's your profit margin? For how many sales? How much did each of your guys systems cost?

Thank you man Keep up the good videos you know it might get fast&heavy on the market with you

how does the furnace and that white machine work if you dont mind me asking, you put the silver in the furnace and the investment in the white machine, how long do you put them in there for each machine? Also at what temperatures do you put them in? or do they change temperatures automatically on their own?

Nice! How did it look like renovated? A lot of pores or were you able to work around that?

Great video bro question where did you get the vacuum and burnout oven from thanks 🙏🏾

@cagamer4161

3 жыл бұрын

eBay

@MetalSmithsonian

3 ай бұрын

Amazon has them as well. Just type "lost wax casting equipment "

Nice video man! Do you think I could get by with just the kiln for now instead of the kiln plus the handheld Furnace?

@drguillotine7485

3 жыл бұрын

No you neeed to keep flask at temperature while the metal heats up otherwise the flask would be cold by the time your ready pour or you could use a torch

@KyleTO7

3 жыл бұрын

@@drguillotine7485 awe damn eh. I couldn't just add the metal in an hour or 2 before the burnout cycles done eh? Handheld Furnaces are pretty cheap on e-bay/Amazon so I really don't mind the purchase, it's more of a save space and electricity thing. If it's a must it's a must though.

Can you please share your 3d printer information and the type of wax or resin you use to print your jewelry

Can you list the equipment in the video and links to where we can buy it?

@xddarko

6 ай бұрын

Yes pleease!!!

Do I need to let the investment get hard first before putting in the kilm ?? Nd do I need to use exactly 903 heat on my kilm

This type of furnace, what is the minimum weight in g. or dwt for melt? Great video thanks.

@drguillotine7485

3 жыл бұрын

3kilo is what it said on website for the crucible

@papaesbueno4650

3 жыл бұрын

@@drguillotine7485 Thanks, I do small casting like 10 to 20 dwt. Can be use for my aplication? Want to try more accurate temp for my melting istead of a torch. Thanks.

It would help if you explained what and why you are doing at each step of the vacuum casting process. Thank you for taking the time to prepare this video.

@drguillotine7485

2 жыл бұрын

It was my first time doing it 😃 next time i will record it

@matthewpeinado2047

Жыл бұрын

Hey you did great. This video was not a tutorial. There are other videos out there for specifics. I liked to see what you were doing as a continuous process.

Is this a model HH-CM01?? How do you drain oil? Good vid thanks.

So, how has your casting machine held up any problems?

How would you say your equipment has held up? I am looking into purchasing all of these bigger pieces, vacuum, furnace & kiln but I want to make sure I'm making the right investment.

@drguillotine7485

Жыл бұрын

Still using it today no issues! But i take care of my equipment

@zanjho482

Жыл бұрын

hi .. i just wanna ask how much it cost for all of them? if u dont mind

Could you explain or list out the items that you got there? And where I can purchase them it would be of great help

@TheCulture

2 жыл бұрын

I don’t understand why he makes a video like this but leaves out details where he got it.

@TheCulture

2 жыл бұрын

It’s been 6 months since you asked and he hasn’t answered lol

@globallo3057

2 жыл бұрын

Mfs be divulging information... Have any of you found out?

@renecaron6409

2 жыл бұрын

@@TheCulture eBay VEVOR 2L Jewelry Casting machine

@Crosshatch1212

2 жыл бұрын

Jewellers suppliers there a couple on instagram .I make custom zippos n bracelets .I first carve or make say a skull out milli put or sculpey then cast it in wax sens it along with the metal ,s o gold .they send me it bck I then proceed to build or put it together and at the price it works out great 70 percent profit every time I aim for .it’s worked well for yrs .but instagram has changed the game with company’s like these .good luck .

so question I'm looking to get some of this equipment I was looking at a centrifugal arm that uses centrifugal force but I came across these two in one machines that has the vacuum and the other part on the right but I'm not sure what is. I assume its a vacuum that sucks the metal in through the investment? how does that work and if I'm not mistaken should you not have had the switch over to the casting chamber when you poured the metal in the flask?

Does anyone see us about filtering the golden pieces after the casting process and what materials used in that

How long do you leave that white plaster in the vacuum chamber

How much time took to burn out wax in the furnace heat chamber

brother can you please tell me how much time did you use for burnout in the kiln ? please reply me

Beautiful! I wish I had a vacuum machine…

I love your vid man this is exactly what I’m looking for a set up to get into making jewelry . Would you mind if I ask around how much you spend for the three items ? I mean the vacuum casting machine the kiln and the oven.

@drguillotine7485

3 жыл бұрын

I spent 550$ for vacuum casting machine, 600 for oven, 200 for furnace i order it all from amazon keep in mind prices have gone up on the vaccum machine since the time I ordered it

As a jeweler/caster for over 25 years that’s one hell of a big flask for such a tiny model to burn out. Your investment powder/consumables cost is going to be astronomical…

@drguillotine7485

2 жыл бұрын

It was my first time so i did not care. I have gotten better and will be more economic in future episodes

@creationlabsinc.189

2 жыл бұрын

@@drguillotine7485 do whatever you want. Haha!

@themindrelaxationstation1743

Жыл бұрын

What would you recommend

@bardownsnipe

Жыл бұрын

You might say, thats one hell of an investment investment lol

@Celestial_Reach

Жыл бұрын

​@@drguillotine7485 ignore people like that. They are affraid of competition and believe it's impossible to make a business using a bare bones set up

Great video!👍👍👍

@drguillotine7485

3 жыл бұрын

Thanks you please subscribe cause I have more videos coming

Bro question can u show how you set your burnout oven or point me in the direction so I can do my research

Would you mind listing the equipment and their cost? Thank you and all the best!

Awesome set up. We’re u casting with gold? I didn’t catch that part

@ashton6478

2 жыл бұрын

Silver

what temperatures do you use and how long for the burnout process. I have the same setup but cant get the burnout process right

@drguillotine7485

2 жыл бұрын

Depends on the wax or resin your using which one are you using? And what investment are you using?

@oceansideos5101

2 жыл бұрын

I’m using wax40 from formlabs and r&r investment. I really need your help please

can you tell me the power rating of the vacuum pump?

Does any one knows how to remove the slags from furnace crucible some of the slags hard to scoop out. Thanks

what did your setup cost you? I thought my setup was super cheap at only $300 for everything. Great job by the way!

@lilel

3 жыл бұрын

Hey do you mind sharing what brand equipment you used? My fiancée has history as a bench jeweler, and I’m going to surprise her with her little own set up; so she can be began casting from home.

@violetboxjewelry

3 жыл бұрын

Where did you get your stuffs? Please and thank you.

@sisuspeaks6655

2 жыл бұрын

May I ask where you got your set up?

@enyolrandal4573

Жыл бұрын

all of that is around 5k

Can you share the links to those equipments?

@dreamteamtokyo

Жыл бұрын

Right! Wtf how does this help theres no links

how to make jewelry using the stone in wax method using a machine like cast, if possible, please make a video bro ...?

I have the same furnace can you please tell me the steps for burnout. I have r&r investment.

Your vacuum may be different than my Kaya, however it appears your knob is in the opposite direction than mine. The Kaya directions have a photo indicating the small pointed side is the “indicator” or the ‘tip of the handle that needs to point to whichever side is in use’. The larger side is the handle. In our video it appears your manufacture ha everted these. Loved your video. Although it is not aimed as an instructional video, it helped me to understand that how I’m doing things is pretty darn close to your process. Good job on your final piece. I’d love to see what programming you used.

@Octopussy1999

8 ай бұрын

yup, he got it in reverse.

@fathimafasmina2601

7 ай бұрын

Hello

Would of been awesome to get the list in description

@drguillotine7485

3 жыл бұрын

Yeah! Next time.. KZread not my full time job

@dustinhatfield22

3 жыл бұрын

Looks like basic Amazon melting pot, and maybe a kaya cast clone, not sure on the oven though

@ARIOS44

3 жыл бұрын

@@drguillotine7485 😂😂🔥🔥

How much would you charge me to do a lost wax cast of a small trinket if i was to send it to you made out of the wax product of your choice? It would not need to be perfect. In fact some air bubles and imperfections would be what I would prefer.

How much did the equipment cost in total and did you get it off of Amazon?

@lordsathariel4384

Жыл бұрын

don't know about this guy but the cheapest iv seen a kaya cast vacum setup that i know was real and not a knockoff was around 490 but that was in a closed community in terms of buying new iv seen them around 1000 to 1200 dollars and from uk companies that are legit iv seen them for around 800 pounds. in terms of this guys melter/furnace iv seen many different brands of the same furnace cheapest i saw which is the one i currently have was 400 pounds or 500 dollars but that was with extras and mine is bigger. now for his kiln im not sure what brand it is so can't tell but i know if you shop around a paragon kiln is around 500 pounds/600 dollars to around 1200 pounds/1400 dollars but all depends if you know were to look obviously

I have the same exact setup and my power trips everytime smh. I use an extension cord from the back of the house and use another extension cord from the inside of the laundry room at the side of the house and it still happens. Two different outlets but same issue Idk what to do smfh

How much did all the tools and machines cost together ?

@drguillotine7485

3 жыл бұрын

550$ for casting machine 200$ for melter 580$ for Oven

@demigodcustoms

3 жыл бұрын

@@drguillotine7485 I got mine much cheaper :P but not as good specs as yours. Than again I have gas forge - not a "melter" and actually my kiln (aka your oven :) ) is nearly industrial grade . How did you come up with a wax pattern as I had some success with wax injection - I found it hard to inject amounts in excess of 60 ml. Sadly I made only few videos and literally everything is on my Facebook page :)

Where can I get gold like you had for casting ???

Couple of things. Make sure you wait 30 minutes before cooling the flask. You could crack your ring. I use a screwdriver and break the plaster up the big peices into the trash can. Then when I get down to the ring hit it with the toothbrush in the bucket. I honestly just throw the bucket out when it gets full with plaster once a year and buy another one rather than clean the plaster out of the bucket

@drguillotine7485

2 жыл бұрын

Thanks for the tips yeah should have waited before putting in bucket

@cashtalkgrillz

2 жыл бұрын

what are the temperatures and time at the temp do you use for the burnout

@isaaccp25

Жыл бұрын

You don’t have to wait at all straight from furnace to water, I’ve been doing this for 15 years

@memerhunjani1245

Жыл бұрын

well honestly silver and 21k gold flask can be pured even after 3-4 minutes after casting but for 18k casting you have to wait 30 min otherwise the ring will break

I'm literally trying to find a casting machine to purchase right now. I can't find anywhere that ships to the UK. There is one for £900, i dont know how much that is in dollars, but I dont want to spend that much as it would take away from the other tools I am buying. Also would you recommend a generic one casting machine or an actual branded one? The one I was going to get is exactly like yours from Walmart however walmart doesnt ship to the UK

@drguillotine7485

3 жыл бұрын

Did you find something in Uk yet?

@TheOriginalWilson

3 жыл бұрын

@@drguillotine7485 I ordered one on eBay reluctantly coming from China but due to Chinese New year it hasn't been dispatched yet. Will update when arrives

@caratcrazyjewellers

3 жыл бұрын

@@TheOriginalWilson update?

@TheOriginalWilson

3 жыл бұрын

@@caratcrazyjewellers I haven't set anything up yet as my workspace became unsuitable to inhabit my machines. After the amount of money invested, I'd hate to have a problem due to something preventable. I will however post an update when I am up and running. If you need any advice though, I'd be glad to try my best to help with any questions you may potentially have 😊

@TheOriginalWilson

3 жыл бұрын

@@caratcrazyjewellers my best bit of advice is DONT GO THROUGH EBAY!! The seller tried to charge more after the I item purchase to ship... 400gbp more. Alibaba =no surprises

Where do u buy these things?

thats great guide of operation

Good job sir

You're not building pressure! You're drawing a vacuum. But great video. Glad you made and shared.

@drguillotine7485

3 жыл бұрын

Leaving the dome on was a mistake I know now

@jondepinet

3 жыл бұрын

@@drguillotine7485 you can leave the dome on thats not the issue. but once you switch the pump to release you can turn the pump off right away. its a vacuum pump, if you are not pulling a vacuum it doesn't need to be running.

@drguillotine7485

3 жыл бұрын

@@jondepinet I had a problem leaving the dome on I could not pull out the crucible from the machine so I think dome has to be removed

@billy2081

2 жыл бұрын

@@drguillotine7485 hahaha ha I learnt dome has to be removed the hard way to its a mother fucka to remove flask if don't remove dome

Hello,Can your vacuum 4L casting thin 24K gold?

@drguillotine7485

2 жыл бұрын

Depends on a lot of factors. it’s probably possible

@immamcool379

2 жыл бұрын

@@drguillotine7485 but I can't do it.i think 4L vacuum is not enough.

@jewelryequipmentsupplies6867

Жыл бұрын

@@immamcool379 6L model supporting,

I tried to get these pieces of equipment but shipping is just as expensicve as the machine itself :( Does anybody know where I can find one for a good price?

@drguillotine7485

Жыл бұрын

Yeah the prices have gone up on shipping since this video! When i bought it it was free shipping from amazon

Very kool Video.

@drguillotine7485

3 жыл бұрын

More coming give a sub

Is it just equal parts water and the investment?

@dominicwolfe1993

3 жыл бұрын

38 to 40 parts water and 100 parts investment.

@creationlabsinc.189

2 жыл бұрын

38ml water per 100g investment is a better way of saying it.

Full Material and equipment list? For purchase, and quote. I

what tape did you use bro?

@cashtalkgrillz

2 жыл бұрын

you can use painters tape

Do you need a compressor also??

@drguillotine7485

3 жыл бұрын

No not needed

@daries

3 жыл бұрын

@@drguillotine7485 ok Thank you.

@jewelryequipmentsupplies6867

Жыл бұрын

no need

I would unscrew that handle and rotate it, it's pointing in the wrong direction. ide also remove the bell when using the right side of the vacuum

Hi will you teach me ?

Lol i just bought all the stuff u just got plus a Phrozen 4k 3-d printer to make my own wax for molds. Yah the power load thing is a little obvious u are in a shed tho. I do this in my basement. I was gona get a centrifugal casting system but idk, that seamed a little sketchy in my basement.

8 months later...How you making out? Was it all worth it and are you turning a profit? Are items selling as expected? Just curious as I wanted to give it a try, but you get caught up in it all and it ends up not being as you expected, so I want to know from someone who tried, lol.

@drguillotine7485

2 жыл бұрын

I’ll make a follow up video! But if you got orders then yes you will make money but I was shocked how much higher my electric bill was it’s better to get a gas oven for the burn out if you can.

Hello, I'm thinking on getting this. How has this vac machine held up? It's it worth it or should I get the original Kaya Cast? Thanks!

@drguillotine7485

2 жыл бұрын

It works great! No issues so far.

hi. @5:55 may i know why you had soooooo much investment over the wax pattern???! all you need is about 1/2 an inch to cover the wax. thanks for the tutorial.

@creationlabsinc.189

2 жыл бұрын

These KZread novices crack me up. Casting is an art and can’t be learned in a month or 2

I want to purchase that machine so please tell me price of machine casting machine

can you post links to what you ordered

@drguillotine7485

2 жыл бұрын

I got it on Amazon. The links change all the time just punch in vacuum Casting

What's up Dr Guillotine! How's ther performance of that chinese casting machine?

@drguillotine7485

Жыл бұрын

Working great! But you wont be able to get for the same price as i did when video was made!

@richardaubin1951

Жыл бұрын

​@@drguillotine7485 Let me test that :) How much did you pay then?

@drguillotine7485

Жыл бұрын

@@richardaubin1951 its been awhile but the casting machine was 600$ delivered

@drguillotine7485

Жыл бұрын

566$ plus tax free shipping

@richardaubin1951

Жыл бұрын

@@drguillotine7485 prices are in the ballpark, at least for delivery to the philippines where I am now :)

What is the name of all those products he is using

Please can you list the casting machine and kiln . Thank you

@drguillotine7485

2 жыл бұрын

VEVOR Vacuum Investing Casting Machine 1/2 HP, 3 CFM Lost Wax Cast Combination 2L with a 9" x 8" Bell Jar for Jewelry Casting and Investing www.amazon.com/dp/B08K8RVX13/ref=cm_sw_r_cp_api_glt_i_7YNRHNA14Y3SVWMKD7B0?_encoding=UTF8&psc=1

@drguillotine7485

2 жыл бұрын

At the time i made this video the cost if the machine was 550$ with free shipping

Love it But 1g = 1ml of water So use the measurements on the jug (to get close)

Ur voice sounds familiar have we met in COD Warzone?

hello @drguillotine what is the names of the machines you use in the video please?

@drguillotine7485

9 ай бұрын

VEVOR Vacuum Investing Casting Machine 1/2 HP, 3 CFM Lost Wax Cast Combination 2L with a 9" x 8" Bell Jar for Jewelry Casting and Investing a.co/d/fKZKwZI

@drguillotine7485

9 ай бұрын

Price went up but still more then half the price of kaya and free shipping which is nuts

Does someone know a Jeweler in Sacramento California area looking for work?

How many pure gold for 14k per gram ?

@drguillotine7485

3 жыл бұрын

Google it bro!!!

Could you please share the brand, or how can i look for a vacuum machine like yours? I'm having a hard time finding it, btw great video

@drguillotine7485

2 жыл бұрын

www.amazon.com/ZHIBAOHUA-Jewelry-Combination-Investing-Investment/dp/B0924P7GCN/ref=sr_1_6?dchild=1&keywords=VACUUM+CASTING&qid=1626015792&sr=8-6

@drguillotine7485

2 жыл бұрын

IT WAS CHEAPER LAST YEAR PRICE HAS INCREASED

@limebulls

Жыл бұрын

@@drguillotine7485 out of sale 😢

how long did you burnout for?

@drguillotine7485

3 жыл бұрын

I did a long burn 🔥 for my first time 10 hours

@nyandayekwai2974

3 жыл бұрын

I couldn’t tell on the video! Thanks! Great results!

@drguillotine7485

3 жыл бұрын

@@nyandayekwai2974 more videos coming for each step give a follow to see the rest of the process

@Ash-zx9lv

3 жыл бұрын

Where did you buy the vacuum caster and melter?

@drguillotine7485

3 жыл бұрын

@@Ash-zx9lv Amazon

Walio nice channel name! New sub ova here. Great video!!'

Dude, drink more water. You sound a bit backed up. Nice video.

Are you still casting?

Are there any toxic fumes to this set up ??

@creationlabsinc.189

2 жыл бұрын

Anytime you burn out anything there will be toxic fumes.

Guy...you need to take off the lid before you turn the casting side on as it pulls air from the other side of the machine. Probably why it was making a noise when you turned it on. Bet you had a hell of a time pulling the lid off

@drguillotine7485

Жыл бұрын

You are not wrong lesson learned

the burnout recess didn’t make any smoke ? That’s convenient

You don't quench any metal when casting break it apart with a probe or screw driver !

@aaronramly1705

2 жыл бұрын

Don't quench ? why ?

How long did it take you in this video to actually go through the full casting process?

@tonyoliver4920

2 жыл бұрын

You have the time to design the model (depends how god you are with 3D modelling software) Print time (depends on printer size and resin) Curing time of the plaster (depends on plaster) Burn out cycle (melting the plastic to leave a void, depends on resin) Melting metal (depends on what metal and your furnace) Honestly the longest part will be the printing + burn out + plaster cure Possibly initial design but once that’s ready you can cast multiples in one go It’s not quick, but you can have multiple thing going at once and different runs

👍

What's with the vacuum pump during the casting process? Didn't sound good.

@drguillotine7485

3 жыл бұрын

It was my mistake leaving the dome on it does not do that if you take off the dome while casting it was stupid of me

price plz

Casting eqp How much prize bro?

@drguillotine7485

3 жыл бұрын

I paid 550$ for vacuum casting machine 200$ for furnace And 580$ for oven

@drguillotine7485

3 жыл бұрын

They raised the price on the vacuum machine to 706$ since I posted this video FYI

@moisesojeda5647

3 жыл бұрын

@@drguillotine7485 do you know if its the exact sama as kaya cast, just without the Logo? Or is their a difference internally. The exterior looks identical

@drguillotine7485

3 жыл бұрын

@@moisesojeda5647 I’m not sure to be honest but it feels like very good quality and works as expected

@Yukkaguitar

3 жыл бұрын

@@moisesojeda5647 the kaya, durabull, and a few others are almost identical in my experiance.

What make and model is the kiln and what did it cost?

@drguillotine7485

3 жыл бұрын

I’ll get you a link it was under 600$ but it’s small can only fit one flask good for beginners

@syedgemstones4273

3 жыл бұрын

@@drguillotine7485 send me link

You should put the links to the items down below so you can get paid. Looks like we all want the items you have

@drguillotine7485

2 жыл бұрын

Just search vacuum casting machine in Amazon.. if these guys wanna sponsor me then ill post links lol 😂

@anthonyniwrad544

2 жыл бұрын

Hell yea man you did a good video😀

@drguillotine7485

2 жыл бұрын

@@anthonyniwrad544 thanks my dude ill be doing more soon its fun!

Price

How much was the setup?

@drguillotine7485

3 жыл бұрын

550 casting machine 200 furnace and 600 oven

@Luz-xl5bk

3 жыл бұрын

Are you willing to share your vacuum casting machine source?

@drguillotine7485

3 жыл бұрын

@@Luz-xl5bk Amazon

@drguillotine7485

3 жыл бұрын

@@Luz-xl5bk they raised the price to 700$ after I ordered I guess they figured out they were selling it too cheap that is still a lot cheaper then kaya casting

@Luz-xl5bk

3 жыл бұрын

@@drguillotine7485 I was waiting to buy one and now I wish I would have just bought one a few months ago! Prices definitely went up on everything I can find. There’s one other option directly from China that’s a little lower but I’m not sure if it’s worth the potential hassle.

How can one get in India

@drguillotine7485

2 жыл бұрын

Im sure you can get this in india. Do you have amazon delivery in india?

@ravitapassi

2 жыл бұрын

@@drguillotine7485 yes...Amazon does

What is all That ?????

WHERE IS THE BUYING LINKSSSSSSSSSSS

I need this machine

@sureshgobi599

2 жыл бұрын

How to buy this

Your definition of Super Cheap and mine are very different.

You wouldn't have bubbles to speak of if you had mixed it by hand--literally by hand. Always put the water in first and then add the investment material a bit at a time until it forms a cone in the center of the bowl. Then use your hand to slowly stir and mix it without breaking the surface of the water. When it feels like very heavy cream, it's ready. Also, all that shaking just put in even more bubbles.

@drguillotine7485

2 жыл бұрын

Nahhh…… you still need to vacuum it and the springs underneath are there for you to shake! It’s literally the process and they proper way to do it.

@DeborahStephenson

2 жыл бұрын

@@drguillotine7485 I never said you wouldn't have any bubbles or wouldn't need to process it through the vacuum jar. I only said you wouldn't have so many if you mixed it properly to start with. I stand by that assertion. Try it my way and you will see for yourself.

@BabyJesus66

2 жыл бұрын

@@DeborahStephenson except you literally said he would have no bubbles. 🤣😂

@DeborahStephenson

2 жыл бұрын

@@BabyJesus66 No I did not. I said he "wouldn't have bubbles to speak of ..." which is to say he would have FEW bubbles, not NO bubbles. Reread my comment.

Where are the links to the equipment

@drguillotine7485

2 жыл бұрын

Go to Amazon type in vacuum casting machine! Prices have gone up since the recording of this video but still cheaper then kaya I seen Them 850$ now I paid 550$ with free shipping

@braekhaven

2 жыл бұрын

@@drguillotine7485 gotcha! Would you say that none of this should be done inside of a house ? Lol

@drguillotine7485

2 жыл бұрын

@@braekhaven you need ventilation for the burnout but other wise if your careful it’s totally safe for doing it in the house

@braekhaven

2 жыл бұрын

@@drguillotine7485 my last question is could someone use the fire gun thing in place of one of the item you're using(I'm assuming it would take place of the orange melting machine,) and if so, would u need ventilation for that?

600 grams of investment, which is what?