Yay for adding a CatShield!!!! Also killing it as always with these intros 😂

@JasonExplainsThings

Жыл бұрын

I secretly want to just make terrible “comedies.” 🤣

Good video Jason and Chris

Thanks just ordered mine!

@JasonExplainsThings

Жыл бұрын

Thanks so much!

Love the ED-209 reference, one of my favorite movies. We need more Paul Verhoeven. These gangs hit my neighborhood so hard that police started staking out Toyotas.

@JasonExplainsThings

Жыл бұрын

Yikes!

This is an excellent solution for 4Runners that aren't expected to be used for heavy off-road life. Thankfully, many skid plate companies are making their skid plates block the cats or creating add-on wings that bolt onto their mid plates to protect the cats.

@JasonExplainsThings

Жыл бұрын

Agreed. A slightly thicker version of the same shield would be fantastic! I'll update you all on how it holds up. I don't do much "rock crawling" but all the stock skid plates have gotten quite a lot of use over the past few years.

@jason.hartson

Жыл бұрын

@@JasonExplainsThings It looks like it'll hold up to moderate scraps just fine. I hope it serves you well. Great video Jason!

Which salesman would you recommend at the dealership you used? I'm finally in a financial position to order a new Taco, kinda bummed they don't have the army green anymore.

@JasonExplainsThings

Жыл бұрын

Zoilo Angeles! He's a great guy. Tell him I said hi. I don't know if you saw my last video, but I'm having issues with that dealership with regard to purchasing parts. They unfortunately are doing some shady things. But for purchasing a new vehicle... they're great to work with.

@JasonExplainsThings

Жыл бұрын

Daniel, will you try to get one of the last 3rd Gens or wait for a 2024?

4runner is looking great. Are those stock size KO2s or did you upsize to 285/70/17?

@JasonExplainsThings

Жыл бұрын

Stock sized KO2. May go with 285s later.

@jose-tube

Жыл бұрын

@@JasonExplainsThings I’m trying to decide between 265 and 285 ko2s with the eibach lift. It comes down to mpg vs looks, but yours looks pretty good with the 265s. What mpg are you getting? The 285s can push you sub 15mpg (with a modest lift like the eibach).

@JasonExplainsThings

Жыл бұрын

15-17 most of the time.

Is there a reason nobody puts specs on youtube videos like this? For example what 4Runner models does this work for?

@JasonExplainsThings

Жыл бұрын

The video has specs that aren’t already self explanatory… torque specs, etc. It will work on any 5th gen 4Runner. Also the link in the description gives all info you need.

Good stuff, do they just make them for Toyotas?

@khwamtay6459

Жыл бұрын

Probably but it will void your warranty.

@JasonExplainsThings

Жыл бұрын

Mostly Toyota, but the also make them for some Honda and Lexus vehicles.

@JasonExplainsThings

Жыл бұрын

😂

Only issue was it cost me about 100 bucks more for trans fluid change at the dealer due to having this on. But I suppose it’s still cheaper in the long run .

@JasonExplainsThings

Жыл бұрын

Crazy! It's nuts they charged an hour of labor to take that off and back on.

@tundras4ever552

Жыл бұрын

@@JasonExplainsThings yea pretty dumb…. Everyone wants to give you the shaft these days

@wadeduvall7026

Жыл бұрын

@@tundras4ever552 Next time just take it off yourself and save the bux (if you have time).

@tundras4ever552

Жыл бұрын

@@wadeduvall7026 it’s just hard for me to get under it and I have a bad back . Other wise yea I totally would

@pyronic120120

Жыл бұрын

Thanks for the heads up. I'm about to install this in my 4runner. Sucks about your bad back, but at least it gives others a heads up to remove it if possible before we take it in for the transfluid change.

Ok - now that you installed the equipment. Get your battery powered cut off wheel and show how long it takes to “remove” it for cat extraction. Nice idea but it guessing it will only add seconds to removing the cat

@JasonExplainsThings

Жыл бұрын

These are mostly crimes of convenience from my understanding.

@pyronic120120

Жыл бұрын

Donut media did a test on how long it takes to cut a cat sized hole in a steel plate of similar gague thicness and it came out to about 7.5 minutes to just cut the hole. Just search "We Tested Catalytic Converter Anti-Theft Products" here on youtube.

This doesn't look nearly heavy enough gauge. It'll add a few minutes to the hack out time but, imo, will not dissuade any thief.

@JasonExplainsThings

Жыл бұрын

Stay away from my truck! 🤣😘

@wadeduvall7026

Жыл бұрын

For sure it won't stop a determined thief (nothing will) but it might just have them not bother and go on to the next easy target.

@JasonExplainsThings

Жыл бұрын

Exactly Wade. 👍

@TheRayDog

Жыл бұрын

@Wade Duvall I'd disagree. Cat thieves almost universally have angle grinders. This presents maybe 15 secs delay. By the time a guy is under a car to see this, the commitment is there. This thing has to be skid plate steel (several minutes of cutting) in stoutness to be worth the bother.

I think the enforcement droid would be very human to deal with them. 😂

@PNW_Bison

Жыл бұрын

That, or bring back the trunk monkey!

@JasonExplainsThings

Жыл бұрын

🤣💯

Good video Jason and Chris

@JasonExplainsThings

Жыл бұрын

Thanks!