A B C , you are the number one Top class of education on Nissan Nevara Timing. My Thanks for education

@abcautotrendy

6 ай бұрын

Thank you for the compliments.

Exelente gracias por compartir tus conocimientos

💪 solid stuff. Super thanks

Thanks again, very good details 👌. Helped immensely.

@abcautotrendy

2 жыл бұрын

Welcome dear

Nice information Thank u

excelent congrats thankyou!!!!

@abcautotrendy

3 жыл бұрын

Our pleasure!

Muy bueno, gracias... 😃🤝👏👏

@abcautotrendy

3 жыл бұрын

cheers

Gooood engeneear

Без слов все подробно и понятно объяснили 👍

@abcautotrendy

3 жыл бұрын

thank you

You are the one

Thanks a million

@abcautotrendy

3 жыл бұрын

Your welcome dear

Thanks a lot

@abcautotrendy

3 жыл бұрын

Most welcome

Спасибо друг наконец-то хоть в одном видео нашёл как правильно эта ебечая планка ставится!

@abcautotrendy

Жыл бұрын

Добро пожаловать, дорогая, мне очень приятно, когда люди учатся на наших видео

@user-td1bu5zd6z

Жыл бұрын

@@abcautotrendy спасибо

thank you

to be honest, i like the music and the video too easy to understand

Zayıf yağ basıncı Navara dizel motorunun nedeni nedir lütfen cevapla

Good job

@abcautotrendy

3 жыл бұрын

Thanks

Soon my father in law and I are going to replace my timing chain due to a rattle. This video was of great value. I wont be removing the whole engine or the front end but everything else around the front will be coming out. I really appreciate you help. Would you mind if needed i contact you via whatsapp?

@abcautotrendy

2 жыл бұрын

It’s my pleasure and sure you can ping me at anytime via WhatsApp

Yes

❤❤❤❤❤

Super

@abubakarseidu5333

4 жыл бұрын

Boss l need to know Crank shaft and sprockets Lock position, before setting the chain

@abcautotrendy

4 жыл бұрын

Spin the crankshaft lock key position to upward, then lock the fuel pump, then loosen the cam sprocket before begin to remove the chains

👏👏👏👏👏👍👍👍👍👍👍Super

@abcautotrendy

3 жыл бұрын

Thank you! Cheers!

@user-pz2nd6og8j

3 жыл бұрын

@@abcautotrendy you ' re welcome😉

Some say its easier to remove the engine, i see you did this with remiving the front end. Is there anything to look out for when removing the front, anything to be aware of? Thanks.

@abcautotrendy

3 жыл бұрын

Apparently you need to remove even the radiator. It’s more convenient to remove all around prior to removing of the engine part

at 0:09 a chain should be done every 100,000 km, at 24:42 it has done only 100k miles, what is the correct unit? km or miles?

@abcautotrendy

4 ай бұрын

Sorry, it’s a miles to be replaced dear

Would have been good to see you remove the timing chain cover and other ancillaries, but still good video.

@abcautotrendy

Жыл бұрын

Thank you

Piano trying to blow my 500 dollar ue hyperboom at 50% volume hahaha daym

Great informative video, what gasket cement do you use?

@abcautotrendy

Жыл бұрын

Thank you.. We are using only Nissan Genuine gasket dear

Thank you , i have navara yd25 4 x 2 does this engine take a balance shaft

@abcautotrendy

3 жыл бұрын

Yes of course it

@inbagovender6287

3 жыл бұрын

@@abcautotrendy Thank you , my one was stolen by the mechanic and Nissan South Africa does not pick up the balance shaft on their parts system for the 4 x 2

Does the vacuum pump gear change when changing the chain?

@abcautotrendy

3 ай бұрын

It's part of the complete replacement chain kit

Hola , me gusto el video mucho y muy bien explicado. Me gustaría saber como aflojaron y apretaron los tornillos de los dos piñones de los árboles de levas? Se ve que no quitaron la tapa de balancines pero no se ve como bloquean los árboles de levas o cual es su procedimiento . Gracias y un saludo desde España ¡

@abcautotrendy

2 жыл бұрын

Let me translate it to English and reply you

@cesarnicolas4662

2 жыл бұрын

Hello, I really liked your video. I would like to know how they blocked the camshafts to loosen and tighten them without removing the rocker cover. How to change the two sprockets without removing the motor cover

@abcautotrendy

2 жыл бұрын

Hi dear, thanks for the compliments. Well you won’t be able to remove/ tighten camshaft sprocket without removing the roccker cover

@cesarnicolas4662

2 жыл бұрын

In the video that they make the rocker cover, all the video is mounted on the engine, so many people think that the same could be done without removing the cover

@abcautotrendy

2 жыл бұрын

You can see the cam sprockets by removing only the timing chain cover but cannot remove them or tighten them without taking off the rocker cover

amigo buenas soy de peru , tengo una nissan navara con ese motor , tienes el manual de reparación lo necesitó para reparar mi motor.

@abcautotrendy

3 жыл бұрын

please send me your email address and i can email the manual for you

Super. Poland

How often should we replace the timing chain? and the average cost to replace in Sri Lanka? (D40)

@abcautotrendy

2 жыл бұрын

Company recommended is to replace in every 100k KM, the genuine timing chain cost 95k as of today

👍👋

How did you lock the balance shafts with the sump still on??

@abcautotrendy

Жыл бұрын

Hello Zac, I still did not get the question

Thanks so much but mine has one hole on the top

@abcautotrendy

3 жыл бұрын

That's ok

How do you tighten the camshaft sprocket?

@abcautotrendy

10 ай бұрын

You need to hold the camshaft with 21in open spanner first then tighten the sprocket

I got vsk d40 and it makes crunchy noise when specially in the morning... Just wondering if that's timing belt or EGR? Thanks

@abcautotrendy

4 жыл бұрын

Harwinder Singh it could be a belt adjustment so please check that first

Maybe this step, same for navara Np300 (D23)..right?

@abcautotrendy

3 жыл бұрын

Yes that’s right

@atiefosman8203

3 жыл бұрын

This step also same on nissan frontier D22 YD25 sir??

@abcautotrendy

3 жыл бұрын

Yes sir, it’s the same YD25 engine

@aneshsingh051

2 жыл бұрын

np300 yd25 doesn't have a balance shaft

Was this engine noisy or just a routine upgrade..

@abcautotrendy

3 жыл бұрын

It was rattling

pourquoi la chaîne distribution de Renault Maxity décalé à chaque fois

@abcautotrendy

3 жыл бұрын

well, that changes when the technology update, but do you find any difficulties?

Does the radiator have to come out or can it be done with just the fan and shrouding off? Asking because I've never done chains nor on this engine before and I work at a dealership and now I have to do one :'(

@abcautotrendy

2 жыл бұрын

Well it’s alway require to take off the radiator and shrouded coz you won’t be able to remove the water fan and crank pulley

@Davo_1991

2 жыл бұрын

@@abcautotrendy yeah thought as much. In regards to the fan, I had a quick look before I had to clock off but I'm assuming that can be taken out with the shroud or has to be done together, or did you find it easier taking out the whole radiator, fan and shroud together?

@abcautotrendy

2 жыл бұрын

It cannot take all in one go, first the shroud then only you can take off the fan clutch from the water fan

@Davo_1991

2 жыл бұрын

@@abcautotrendy oh ok thought so but the shroud doesn't fully surround the whole fan? So you don't have to take out fan and shroud together? If not that's good news but I was already expecting that awkwardness of having to take out fan and shroud together :S lol. Thanks for your help

@abcautotrendy

2 жыл бұрын

Welcome

Nice how did you tighten camshaft bolts with rocker cover on.

@abcautotrendy

4 жыл бұрын

Victor Given you need to lock the camshaft before attempting to tighten.

@caseywakelin4068

4 жыл бұрын

@@abcautotrendy he asked "how did you tighten the camshaft bolts without the rocker cover" of course you need to lock the cams, so how did you lock the cams without taking of the rocker cover?

@grumpyldmn

4 жыл бұрын

@@caseywakelin4068 Yeah was wondering about that, maybe they didn't replace them.

@st_us

2 жыл бұрын

They used an impact wrench, all mechanics do that.

@abcautotrendy

2 жыл бұрын

Make sure to use torque wrench

So I don't need to remove engine like I've been informed

@abcautotrendy

Жыл бұрын

Of course you do not need to remove the engine.. Only tappet cover, timing chain cover (top) and oil pump, in fact you have to take off radiator fan, fan clutch & crank pulley

Is that duplex?

@abcautotrendy

3 жыл бұрын

Nope dear it’s the simplex

,👍🏼👍🏼👍🏼

Hi, do you know the torque specs for the crank pulley bolt? Thanks.

@abcautotrendy

2 жыл бұрын

Yes, let you know tomorrow morning

@andyd5826

2 жыл бұрын

@@abcautotrendy Thank you!

@abcautotrendy

2 жыл бұрын

We are following below settings Step 1. 75Nm Step 2. Loosen bolt Step 3. 75Nmu Step 4. Tighten 120°

@andyd5826

2 жыл бұрын

@@abcautotrendy Cheers mate👍 from 🇦🇺

@abcautotrendy

2 жыл бұрын

Cheers bro

😄👍👍👍ok

عندي مشكل

@abcautotrendy

3 жыл бұрын

can i know whats the issue your facing dear?

🙋‍♂️👉👍🤝

Mate how long did the job take

@abcautotrendy

4 жыл бұрын

Nearly 10-15 hrs

@jamesappleyard4529

4 жыл бұрын

ABC Auto Trendy thanks mate

نسأل عن الحرار لماذ ترتفع وما السباب افيدونه يرحمكم الله

@abcautotrendy

3 жыл бұрын

well, there are multiple issues that causes to raise the heat up, please check most of my videos explain solution and root cause of the issues. in the meanwhile please check following. - radiator cap (radiator should have the flat radiator cap and reserver tank should have with the spring cap - use good coolant if your not using - please check the water pump - please check whether in your vehicle has thermostat valve or not حسنًا ، هناك العديد من المشكلات التي تؤدي إلى زيادة درجة الحرارة ، يرجى التحقق من معظم مقاطع الفيديو الخاصة بي تشرح الحل والسبب الأساسي للمشكلات. في غضون ذلك ، يرجى التحقق من التالي. - غطاء الرادياتير (يجب أن يكون للرادياتير غطاء مسطح للرادياتير ويجب أن يكون خزان الخزان مع غطاء الزنبرك - استخدم سائل تبريد جيد إذا لم تستخدمه - الرجاء فحص مضخة الماء - يرجى التحقق مما إذا كان في سيارتك صمام ترموستات أم لا

Magkano ser labor kapag magpalit ng timing chain??

@abcautotrendy

Жыл бұрын

It’s depends on the job, example here in Sri Lanka we charged nearly 75$

@michaelmanuel5516

Жыл бұрын

@@abcautotrendy ah ok..tnx a lot!!

Good job

@abcautotrendy

2 жыл бұрын

Thanks