Fitted my timing chain upgrade kit last weekend, couldn't have completed it without your vids, many thanks, happy navara owner 👍👍👍

@RogerM88

2 жыл бұрын

How it is handling your new upgrade timing chain after these years?

@yopyop3933

2 ай бұрын

What kind or brand of kit is that UPGRADE ????

I just googled "does nissan pathfinder have a timing chain" and your vid link came up... the reason I clicked on it was because of the place name "west yorkshire" oh my home county, not only that your in my home town "Bradford" that I left 40 years ago.... So I watched your video just to hear the Bradfordian accent and I was amazed at what you had taught me about this engine Thanks for the informative video

Just took my D22 to West Yorkshire engine services for the shell upgrades and the timing chain upgrade plus a new clutch. Arrived to a warm welcome, very friendly and informative. I was even given a lift to the railway station which was only 2 miles away but still no trouble for them. Thanks Les & Suzanne

@mustaphahussien9361

6 жыл бұрын

Nice

@simonchandley2023

6 жыл бұрын

kenny crossland o

Gday , we have successfully done a timing chain kit upgrade with engine still in the vehicle. Just want to say that we would not have got very far without you videos. Thanks to you all . From Australia 🇦🇺

@westyorkshireengineservice9160

6 жыл бұрын

Thanks, Buddy all the best Des

@justayoutuba5380

6 жыл бұрын

gavmegs ..how do I purchase the kit ..also in Australia..thank you

I may of put my comment on the wrong video but I just wanted to say a big Thanks for your videos. It helped me out tremendously. Doing a service on my car. Which is a Nissan pathfinder 2009 The only massive issue I had was trying to remove the oil filter. Totally seized and over tightened by who ever did it last. I ended up have to take the wheel off & cowling. But the worst part was the metal pipe just above the oil filter. Thanks Nissan for your stupid design of where you decided to put the oil filter. Nothing worked even trying above the engine which I tried to do before having to resort to removing wheel etc If its wasn't for your great videos. Which has taken me 2 weeks to find. I think I would of given up. I wish there was more garages that's as good & as honest as you. Specially this day and age. Which is hard to find. And is willing to share some advice & tips to help people such as myself that has been let down by garages. Really appreciate your wealth of knowledge. And will certainly be considering buying parts from your garage. Than the over inflated Nissan dealer where I'm based. They charged me £5 + vat for a sump plug brass washer. And wasn't even prepared to tell me the torque spec on the serpentine belt pulleys which needed changing. And stretched belts. Your a breath of fresh air, And is really appreciated I do hope I have your name right Des thanks again buddy can't thank you enough I've Subscribed 👍👍👍👍

Thank you for telling me about the oil pump O ring, I had just put a new head, water pump and timing chains on my D40, and wondered why the hell the oil light would stay on for 30 seconds after starting. Well after looking at this, I have now pulled it back down and guess what, I need a new O ring, thank you so much for your no bullshit and very informative videos.

@marksquire232

2 жыл бұрын

Did u use a new o ring or just use atv 🤔

What a beefy chain upgrade! Very nice the business. You can obviously tell you are pros in this field.

What a great instructional video. You certainly know Nissan stuff and how to pass on your obviously extensive knowledge. Thanks! 😀

@mohamadkij3318

6 жыл бұрын

Robert Naumann

Thank you for the explanation. Today I started installing a motor just like it

These are the types of videos I love making & watching on KZread. nice work!

Great vid pal! I’m from Rochdale but moved to NZ, currently looking at getting a D40, so really enjoying your channel! All the best

Love your videos, iv only just started to play with these, very helpful! Thanks from Australia 🇦🇺

@westyorkshireengineservice9160

5 жыл бұрын

JACK JACKSON thanks buddy

Wow. Never saw that before. Amazing! Thanks.

Thanks for the video. I was thinking to upgrade timing chain, definitely something better than Nissan supplied.

thank you so much this video maker otherwise difficult to fix timing change no experience as a cummings man.

Good stuff guys. Just did an in chases timing chain upgrade.

good video! just did the job..seems to work allright. one detail i think is an improvement: when fitting tthe lower chain cover, i took out the locating pin.then, i could fit the chain cover without endangering the vital oil seal. tighten the bolts slightly, then hammer in a new pin/piece of 8 mm tube. the old one cannot be reused, its a very thinwalled tube, gets bent with the removal.

Thanks for for all your videos they're so great video about nissan yd25 engine lam from papua new Guinea thanks

Great video. Knocked the woodruff keys out and shattered them when replacing the crankshaft seal so this helps alot.

@westyorkshireengineservice9160

7 жыл бұрын

Nice one!

Great job guys!

Thanks you for your help

First Class instructional video .

Me too thanks very much for this valuable information 👍👍👍cheers mate

Nice and informative videos, thanks a lot for your technical advice.

greetings from Kurdistan ... thank very much for the great VIDs I like how you work .. I'm working in the same industry as well and I hope you could make a Vid for the how to set the engine on TDC and how to install the fuel injection pump thanks

@westyorkshireengineservice9160

7 жыл бұрын

There is a video on this we did it some time ago tdc for the d40 is about 8 oclock and on the d22 it is at 12 oclock

Good video and informative.keep it up guys

Great information . Thank you .

Suscribed and like, Nice Video, and i never never look the inside Gear and Chain Timming of a NISSAN Navara Engine, is so Amazing, Hard Like HULK

excelente viejo te felicito tu tutorial!!!!!!

Man u are really good

Wurth sealant ...... awesome !

Super Video !

Very good job thanks

@VivoVivo-ho6dy

6 жыл бұрын

Gayan Sajith ล

Top Work

@mohamadkij3318

6 жыл бұрын

دخان ابيض وطقطيش

Very good experience

thank you so much for your videos! I have a 2010 Nissan Navara. my Q is: can a badly fitted timing chain where bolts are missing cause clutch problems,s through excessive engine vibration?

Hi Yorkshire service, can you show us how you set fuel injection to DTC and markings on them you doing great job congratulations from Australia

Excelente video 👍

Bom trabalho! Parabéns!

Great videos

good video,,,,,,,,,,,,well impressed

i like this one.

ขอบคุณที่แบ่งปั่นความรู้

Hi mate your videos are pretty much the best I’ve seen by far. You’ve helped me a lot! Would you know of any mechanics in Brisbane Australia that will be able to replace my timing chain? It’s done 200000kms and it’s just started to make that loud ticking noise. Please help

Хорошее видео Спасибо 👍

Thanks

Hi mate, how does the vac pump up grade come out and in ? Great videos and advice many thanks

genial . Buen trabajo. saludos

Thak you

Megadta magát a felső láncfeszítő, miatta cserélném kellett a teljes vezérlést, nagyon jó útmutató videó, köszönöm.

@petermolnar8667

2 жыл бұрын

Km mennyi volt benne?

@lajoskicsiny1664

2 жыл бұрын

@@petermolnar8667 az eredeti elment 370 ezret, utángyártott követte , nem ment 30 ezret megnyúlt a lánc , megadta magát a feszítő és ugrott is a lánc .

I'm wondering if its possible to remove the 2 dowels from engine and load into the cover so you can avoid the o-ring issue?

Can you do a video on setting up the Throttle Position Sensor for the Nissan TD27t engine??? This engine was widely used on the d21 chassis.

thanks شكرا

Very nice sir

Hello West Yorkshire Engine Service. Thanks for your amazing videos. You have helped me with my lemon of a D40 better than a manual. Latest prob is crank is worn about 50 thou and con rod. Finding it hard to fix. Is a Thai or Spanish crank interchangeable. Navara ST-X 2011 Diesel YD25DDTi. MNTNCUD40A Thank You.

good video. maybe a video to check whether the engine has suffered catastrophic damage due to a chain break?

Thnkyou good gup

bravo

Hi, I noticed your video makes no mention of the use of shim plates behind the fuel pump sprocket for alignment relative to the vacuum and crank sprockets. Why is that?

great video just replaced cam chain and tensioner

Omfg, those 3 bolts that hold the Catalytic converter, super hot here in Australia, i ended up using extention bar, with makita impact driver, the 3rd bolt, i took the front wheel off to get access to it. 😳

Hi Guys, excellent informative video, obviously know your stuff, i will be in touch for a Timing chain kit, Alan Diesel mechanic in West Australia

You are awesome Des. I am learning so much from you that I now feel I am a Nissan Pathfinder/Navara specialist. One question: can you please put up a video or tell me how many NM do I torque the cylinder head bolts and cam caps. I can’t seem to find the torque specifications anywhere.

@westyorkshireengineservice9160

4 жыл бұрын

Head bolts 39nm cam caps 16nm cheers mate happy fitting

@abdessadikennia

4 жыл бұрын

I am mechanical.i VB like this

Do you ever fix x trails with 2.2 DCI...?

hi mate awesome channel awesome info I got a question I got a Nissan cabstar 34.10 with 2 rubber mounts on the back and 2 on the front so am I right in saying the cab does not tilt forward as I need to weld the underneath thanks

tesekkurler

nice vedeo

hey mate our d40 nav spain did the timming chains and the head. would it be cheaper to buy a lower ks engine? the cams are stuff valves are stuff one injector wont come out

With the 2019 model of nissan navara can you say the timing chain are more realiable than the older version ?

I think my d40 cam chain has snapped. It was making a similar noise to that one. It went as I tried to start it so what’s the chance of my valves being shagged?

going to buy a 2014 nt400 cabstar dropside today, perhaps i should just rip engine off it and send to you to refurbish :)

@westyorkshireengineservice9160

Жыл бұрын

Give me a call on 01274 640028

Do you stock the rear engine lifting brackets? I rang nissan and apparently they dont sell them. Alternatively, how would i support the engine for lifting? One final question, is there any benefit of going with the d40 engine block over the d22 engine block or using parts like the oil pick up from the d40 on my d22 engine?

I would like to know which brand of Distribution kit you use on the engines you repair

Hi if the engine has been running prior,can you still turn the engine by hand to time it up. I need to check a few things not related to a rebuild ...im doing some calculations but hard to explain really thanks inadvance

good

grazie mille tutto perfetto

Hi all. Great and helpful vids. Wish I lived near ya( I'm in Bristol) about to buy 07Navara from my work and it's started stalling! Sounds like cam sensor!? Timing chain? Or both. Can you give me details of chain kit you can supply and£££? Or anyone in this part of the country you might recommend to do the work? Going through your vids and starting to have second thoughts!! Anyway hope to hear from you with any advice.keep up the good fight!

hello nice video I have a question my 06 infiniti m35 started to make a knocking noise / ticking now it lost oil pressure at first when you first start it it only made a ticking not really knocking noise it would go away after you gave it gas now it really has a rod type of knock I think I caught it at the early stages before it spun a bearing any advice is greatly appreciated

Vert good

Hy I'm Paul from malta first of all thanks to help many mechanics even me with your information. .the second thing i fix many Nissan navara in malta and now 1 Nissan navara 2007 d40 is coming with noise is pinking when press the gas more than 2500rpm in the same time is very smoke white .the engine is working 100% but when press the gas more than 2500rpm the engine make this noise the torque of the engine is very good. Is possible the injectors ? If I find this problem i put the answer here guys ceers

Tq

Oh it only cuts out first thing in the morning or if it has been sitting for awhile once it's warm no issues

Do you have knowledge on the 3.5 petrol v6 engine as fitted to Nissan Elgrand e51

My uncle will buy nissan navara😊😊😊:)

Can u do a video on water pump replacement 2007 d40

Do you need the whole kit ie sprockets incl really?

Is it true that if you keep up with the services on the st-r d22 2.5 diesel. You won’t have to change the timing chain after the 120,000 replacement?

Single roller timing chain on a diesel engine ? Nissan must be crazy.

Watch all your videos'm having problems with my engine and Yd 25 ddti when I turn my engine it takes to turn off the indicator of oil pressure and make noise in the current command which may be happening already changed the command full current and the problem percisste u could help me

Mersi

Hello there can I know where can I downloaded the Nissan navara d40 workshop manual?

Just watched your vid on timing chains very good, where do I buy parts? Cliff Mildura Vic aust

good work, love your videows, have you got ones with regy the parrot

@westyorkshireengineservice9160

4 жыл бұрын

Nathan Reid yes we have

@nathanreid2974

4 жыл бұрын

how is he, could you send me a link to one of the videows

Dude you my friend are amazing. Thx. Looking into purchasing a 2004 navara d22 but read the horror stories about them. how much does this upgrade usually cost to do?

@ahmadkamali8547

3 жыл бұрын

If you want.. only bye a 100% japanese manufactured and notice the engine it should have Asco n Amco n Aisen seal at the engine side never ever bye other then original Japanese.. Others are all chainees selly n rabish engineering

Hi today I replace clutch for Nissan. X trail 2.2. After start engine make a lot noise come up p0016 Cam sensor. Maybe timing out ?

What is the resource of the BGA kit for YD25DDTi (Nissan Pathfinder) compared to the original?

Is this only available for the D40 Nevarra or can it be used on other engines, such as the VG40DE found in Xterra's, Pathfinder's, Frontier's, 370z, etc?

You are very good mate, i like you videos and if you can tell me how much will you charge for this kit delivered to Australia 3810 ,My REGARDS AND KEEP UP THE GOOD JOB

Is there other way to remove vacuum pump rather than opening the timing chain compartment? cheers