Heloo, where I can buy this tire in Europe?

I've seen a lot of reviews of the rim spinning in the tyre while cornering and accelerating, do you have any ideas how you could stop this from happening? Maybe like a gel like lubricant that turns sticky or acts as a glue when hardened? I can't find any like that best I can think of is using locktight, any solutions for this problem?

What breaks are you using for that 140mm rotor disk? I want an upgrade for my stock breaks but i dont know yet what fits

What kind of screws did you use? It's the problem with us right now. And I mean the long screws :)

@FalconpevSg

10 ай бұрын

We provide the long screws together with the tire

Mám pocit že dosť pláva táto pneumatika, hlavne v zákrute. Dúfam že si nato zvykneme... Inak návod super.

Dear Falcon, thanks for this second video. I followed the first video, the one displayed on your website at the page for the tyre, and i could not install it. I think it would be a good idea to remove it from the website and only show this second video. I am going to try using the lubricant this time, i hope it will work. In some other videos, (honeycomb tyre for xiaomi), some people boil their tyre in water to make it more tender before installation. Would you recommend that trick ? Thanks in advance

@FalconpevSg

Жыл бұрын

No we don’t, it changes the composition of the rubber

I do not encourage lubricant. I used the exact same stuff used in this video, and it created a couple of problems. 1st - While putting the tire on, even though it was certainly easier to get the tire on the rim, it also would move on the rim if I wasn't careful, which misaligned the screws with the grooves on the tire. I had to manipulate it a bit to get it realigned. 2nd - I took the scooter for a test drive and discovered that, while turning, the tire would slide just enough on the rim to give you the sensation of having a flat tire. I felt very nervous turning at any speed above 10 mph.

@FalconpevSg

Жыл бұрын

Use a lubricant that can dry up quickly.

@davidweinreb595

10 ай бұрын

Please, how did you solve the problem with swimming over 25 km?

Did you guys use Loctite for the screws at all? I watched another video a while back that Loctite is important for those screws. That being said, I am new to e-scooters. Is Loctite important and which screws should I even use it for? Great video by the way. I appreciate the step-by-step process.

@FalconpevSg

2 жыл бұрын

Yes we do but not the strongest loctite, just the blue one

@FalconpevSg

Жыл бұрын

@Sister Mary Clements check your screws if they are still there

In the shop there are 2 options: with or without installation. Could you explain what does it mean? Is it additional cost of work or instruments?

@FalconpevSg

2 жыл бұрын

with installation is not possible unless you live in the same city as us.

I bought mine and it did not come with any guide screws. is it possible to do it without them. If i need them, where would i be able to buy them?

@FalconpevSg

Жыл бұрын

It needs the guide screws otherwise it’s virtually impossible to fit

Where can i buy the 3 long quide screw?

@FalconpevSg

Жыл бұрын

It comes with every tire

turkiyedeyim bu lastiklere nasıl ulaşa bilirim kendim taka bilirim kardeşim

@FalconpevSg

Жыл бұрын

english?

@yakupbozan

Жыл бұрын

@@FalconpevSg sorry turkish :(

@inSaNe_44

Жыл бұрын

@@FalconpevSg he wanted to know from where to buy the tires, bcoz he said that he can install them all by himself 👌