Falcon Pev | Pab Pmd Escooter Ebike Shop Singapore
Falcon Pev | Pab Pmd Escooter Ebike Shop Singapore
About all things electric, all things electric scooter and electric bikes and sometimes, about nothing but a lil funny news in the PEV world. In Singapore or around the world.
We are Falcon PEV, the premier electric mobility company focusing on getting you, the commuter, out and about easier and faster. We believe the green personal transport solutions can be a viable mode of commute for all urbanites and we have a range of electric bikes, electric scooter, kick scooter, electric trikes, mobility scooters and other personal transporters to cater to your every commuting need.
We are the one stop solution to your last mile problems and we cover a wide range of topics including electric vehicle performance, security and rider safety. Do subscribe to our channel for a very exciting 2021 line up of videos and new products. Watch out for new additions to our ZERO and VSETT Family!
Oh, for more of what we are planning for this exciting year, follow us on IG @falconpev too!
Пікірлер
hi man i got a kT 36v Foc controller with an LCD screen G51 and wired it up to my scooter .. it rattles and in some combinations it doesnot get any speed. the seller tels me its more compatible with electric bycicle engine ....and not ans scooter motor .... is it true?
@@amirhoseinkargar3733 check if motor is compatible firstly. The controller might be for geared motor
@@FalconpevSg this is what company told me at last ... you mean its impossible to wire it up to a non-geard motor? isnt there any firmware update or changes that or even reprogramming to make it work for fancy scooter motors?
@@amirhoseinkargar3733 no it’s not possible to change from geared to non geared motor
Love you bro
Shrapnel 1. fragments of a bomb, shell, or other object thrown out by an explosion.
Available in USA?
HEY MY Vsset 9 + Don’t turn on off de Dual motor what do u think can cause this problems ???
I see you can start it without a push. Can you explain how? It will help me with stairs a lot.
Can't find a video how to repair buttons
It doesn't work. If it does, we'll see a real demonstration on KZread. None of the sellers is willing to test it, that should tell you something.
Better to have than not have. $20 to give you a few more seconds why not
It's not about seconds. It's about false insurance. You've got to show us it works. What are you hiding?
Do yourself a favour and don’t ride tubeless tires
why not sir
Best thing I did was go tubeless. I repair and be back riding in less than 10 mins.
Where can i find one and what are the other details like does it have a monthly subscription
Better to remove the brake pads and put the brake block between the pistons to prevent brake pad contamination with mineral oil.
I need a way to add a dual crown fork like this to zero 10x
What is the widest tire that can fit on the Inokim Light? Can 8.5x3 inch tires fit?
I have the zero 10x 60v 21ah what can I do to get more power ? Do I have to get new controllers or can I give more watts with the stocks ?
Why didn't he mount from the other side?
The wire is in the way
@@FalconpevSg and there is no connector?
@@ernestsbrigis1004 it’s troublesome you have to individually remove each pin, if you have enough technique this method is much faster
Let’s try this. I recently bought the immobilizer for my TravelScoot and it did not work. I noticed the light in the remote was dim. I emailed your company for instructions on changing the batteries to try that before I send it back. I received no response.
💯
hi bro there is a black button on the right side of the scooter at the folding system do you know if that related to the folding security or so? thank you in advance
So.. i have a mangosteen M1, 60v batteries, same kind. Can i connect the two batteries together, in order to get at longer range?
what is a mangosteen? jewish mango? joking aside, yes you can connect two batteries with the same voltage together.
my scooter charges to 2 bars out of 5, does this now, suddenly, the charger turns red when I plug it in then green after a while. Is it the battery, the charger or the controller?
It’s the battery.
There only 2 dollers to buy stop embarrassing yourself and its simple and free to install yourself 🤡s
Noted that the brake have two cables . Brake light? Can change to hydraulic?
What modwl is this
Check it out here www.falconpev.com.sg/products/10x3-inch-pu-filled-rubber-tires?_pos=2&_sid=83ba477a6&_ss=r
How do you activate the external relay? Does this alarm module have a 12 volt voltage output on the orange wire?. What is your relay reference that you are using? How do you keep it from burning with a 42 volt activation charge from the battery provided by the orange cable? Its amazing
dont know, it just works and its cheap.
My motor. Frame is. Brock how. To fix it. I had accedent with buss
Motor broken no way to fix just replace
does this fit the VDM-10?
I'd like to know if the limited motor would yield any considerable benefit for a 52V model like the VDM-10
is there a way to get this working with a VDM-10?
Where can I buy this kit? and I have an inokim ox
Yes sure, check out our website www.FalconPEV.com.sg
❤❤❤
Your sight is very expensive?
What is expensive
I have an soflow s06 with a custom controller, i have error e7, but its running and i think smoothly, i think the blue wire from the controller is loose than the otherones, i think it snapped of the controller, can u help me ?
Hello Can you show me how to change the front fender on the zero 8
I need to fix it for my son,but led light on fender is killing me
Just ordered mines can’t wait
Is it safe to use a 25 or 30 amp fuse on a 5.8Ah 36V Li-Ion battery?
Where can I get one
Here you go www.falconpev.com.sg/products/remote-control-teen-safe-limiter
Is this plug and play? Where i can connect it?
See the video here on how to install it www.falconpev.com.sg/products/remote-control-teen-safe-limiter
where can one find those three longer allen hex bolt?
I just spent $1429 to repair my Wolf warrior x and when They shipped it back to me the display has read error 07 ever since I turned it on after receiving... Seems like after spending $1429 to have it repaired I shouldn't have to deal with this problem !!! Wtf?
It’s a simple connection issue. Just make sure your motor connection is plugged in properly
I whant to try this !
My inokim 3 when i riding is turn off, after i'cant turn on, full battary, where is problem help me
Can’t really tell
@@FalconpevSg inokim is strong scooter, but my scooter is not strong after 500 mile is damages
Thank you. This solved my problem. Interestingly my motor worked with only two leads connected?
I have had nothing but problems with the nutt brakes on my RS5. A bummer for sure. The scooter , though, is excellent 😊
Removal of damaged ignition by way of drilling out the tumbler
Hello. I need help. I have a zero 9 scooter that won't take a charge. My scooter sat for awhile without use and the battery dropped to 21.6V, I removed it and had it checked out and the technician was able to charge it up to 51V. I took it for a ride and when I tried to charge it the charger stayed green. The battery is reading at 46.3V currently and the screen shows the battery is halfway. I tested the charger itself and is pushing out 54.6V which tells me the charger is fine. When I plug the charger to the scooter it turns green showing me that the battery is powering the charger, then when I plug it into the wall outlet it just stays green when it should be red. I tried your video and opened up the scooter again to try and find the fuse, but I don't see one. I've tried to research it and can't seem to find any information on whether or not this Zero 9 has a fuse. Please kindly provide some insights below to help determine the problem and how to fix it. Any help would be much appreciated. Thank you! 1. Do you know if my scooter has a fuse? 2. If so where is it located? 3. Is there a reset button to reboot the scooter? 4. What could be the issue it won't take charge when I witnessed it first hand take on a charge when the technician attached his battery charger to increase the BMS to 51V?
I have a Vsett10+ Build (Legacy2.0 from IO Hawk 52v system) and i would to asking how i remove E00 on the display it comes only if the Vibration are coming hard and the EABS brakes me down what i could it be ? and the battery are full charged
Good video! I'm gonna try that and get a higher charger to revive my old 42v batteries. Yes, i listened very closely 3 times already. I'm subbed. thanks, much appreciated.
Best explanation ever.. Also already follow you on tiktok
Great video. Been a while since I’ve watched anything new from you guys. 😊
Where can we get it and how can we instalm it ?