VSETT 10+ Electric Scooter Tire and Tube Change
Автокөліктер мен көлік құралдары
We hope this video helps you change your VSETT 10+ tire. If you have any questions that weren't covered in this video, please contact us at revrides.com.
Stay in the loop:
Instagram: www. REVrides_official
Facebook: www.Facebook.com/REVrides
Пікірлер: 278
2 years later and this is still the best Vsett 10+ tire change video! Great work again RevRides! Using it today just to refresh my memory as I put on the PMTs!
@RevRides360
6 ай бұрын
Glad it's been useful.
this was extremely helpful! Much easier than changing tire on EUC and a lot less can go wrong!
Love that you gave torque specs! Thxs!!
just did my first tube change, thanks for the video guys!
Got my first flat on my VSETT 10+, thanks for the tutorial, very helpful. Thank you!!!
@RevRides360
2 жыл бұрын
Glad we can help!
@Yankeefann
Жыл бұрын
I definitely strip three of the screws lol I sued regular Alan keys had to do it with the rotor on worked it was a struggle
Changing tire for first time this year. I didn’t have to remove fender but I removed the two left screws to get the motor cable to the left side for room to work on the tire
Great video. Thank you so much!
GENIAL VUESTRO TUTORIAL, AMO EL VSETT DESDE QUE LO CONOCÍ POR KZread, GRACIAS POR COMPARTIR EL GENIAL TUTORIAL
Muchas gracias chicos, genial, me salvaron, saludos desde Colombia
Basically this is applied to all electrical scooters ❤, thank you
Great Video Tyler!
@RevRides360
3 жыл бұрын
Thanks man!
Great video and very helpful, thanks! Just curious why you used newton meters for the small bolts but foot pounds for the wheels axle? I mean in the end it's only a matter of converting the metrics but I found it a little interesting anyway...😉
Wow, this is INFINITELY EASIER than my Emove Cruiser tire change!! I need to get the vsett 10+ ASAP!!
@RevRides360
7 ай бұрын
PROVE IT!!!!!
very helpfull! , I just change mine, i didnt need to take the brake disc but thank you very very helpfull.
Hey Tyler love your videos I just ordered a vsett 10plus is there any way you can do a video on the PO settings does a couple of videos but they are a different language thanks
Man awesome video!
@RevRides360
3 жыл бұрын
Thank you so much! It was a fun one.
Loving the video format, could you guys do a video on replacing front swing arms??
Nice video! 👍
@RevRides360
3 жыл бұрын
Thanks Cameron!
Does the whole assembly just line back up perfectly when you fasten it to the swingarm? I took my front wheel off to install a steering damper and it seems I could be +\- .25” in either direction which could affect brake rotor movement as well.
Thank you so much! I was dreading changing this tube and it made it really easy to follow. Explaining how much torque to use is a great idea, too often overlooked.
You guys rock!
3 mins in so far so good 😂🎉
Brother thank you i finally manage to get the tube in lmao 😂 i was F*** up the thing i didnt blew any air in the tube than took a jump to gas station and manage to get it in at first
Can you please show how to programme phones to key reader and explain how it’s security system works if it’s any good? Cheers your videos are just so good since there is not a lot of people that can help in some towns
I patched up the inner tube on my VSETT 10+ today, and there is no need at all to remove the brake rotor or caliper. It is still somewhat of a hassle, but at least a couple of steps are of the list. Also, there was no loctite at all on the 6 screws that keep the rim together.
@joshuajameselumba981
2 жыл бұрын
You're definitely right.
@WouterMcKenzy
2 жыл бұрын
You are correct.
@sohaibalmahagri589
2 жыл бұрын
How are you going to reach the rim bolts they are in the way no?
@janergaard
2 жыл бұрын
@@sohaibalmahagri589 No, it's fine.
@damaribrackett1159
2 жыл бұрын
Hey for some reason my vsett 10+ tire won’t take in any air I’ve only had it for 6 days the gold pice that you put the air in on the tire I’m able to wiggle it noticeably more than the front tire so just wondering should I get a new tire or inner tube or even both? Also what other things should I get to decrease the chance of this happening again
Does anyone know where to source the button head screws to the rotor? 3 of mine came stripped with a bent rotor so after I find a way to get them out I'll need more.
Man my break rotor screws were in their so tight, one of them got stripped 😢....ANY ADVISE on how to get that bolt out???
Hello, nice video ! Can I use excerpts from the video (without sound) to illustrate what I'm saying in my video? This is for a french presentation video. Thank you for your reply. Yours sincerely 😉
Thanks for this Tyler - gotta do my first tube change this weekend
@RevRides360
3 жыл бұрын
Glad to help!
thanks man, that was easy to deal with...
@RevRides360
7 ай бұрын
Glad it helped
do guys know the torque specs for 19mm nut on swing arm is it the same as the 21mm nut? 50ftlbs?
Good job👌👌 very Profesional
@RevRides360
3 жыл бұрын
Thank you!
Nice work guys.
@RevRides360
3 жыл бұрын
Thanks Ginger on Wheels! Hope to catch you back in the shop soon.
@GingerOnWheels
3 жыл бұрын
@@RevRides360 with the EX.N floating around in stock soon I think its inevitable ill be showing up sooner than later.
Is it really necessary to go through all this steps just to replace a tube? I'm a newbie to this kind of handy stuff and I don't even have the required tools/glues.
Thanks for the vid mate. I need to replace the tube in the rear tyre. Weird thing is I see nothing in the outside tire. No nail, nothing. It just went without air....
Super helpful for when I have to change everything. Is there a Manuel you guys have that shows all the areas and how much you have to torque them
@RevRides360
2 жыл бұрын
Thanks for reaching out! Feel free to follow up with Service@REVRides.com for any specific questions you may have!
Thx's got there in the end
Good video. I would like to know how you adjust the suspension. What is the tool needed and do you need to remove the rear wheel to do so? Thanks, Frank
@RevRides360
3 жыл бұрын
Hello, most users us a pair of channel lock pliers to twist the preload adjustment on the Front and rear springs. This typically damages the paint on the shock, but at this time there is not a better method. Removing the wheel is not required. Thanks!
how is that blue sauce called what u put on the screws
Good video
@RevRides360
3 жыл бұрын
Glad you enjoyed it!
I noticed the motor cable just clips to the frame. Do you have any concern for damage with the wire being exposed ?
@josephcox2201
3 жыл бұрын
The the cable has a spring around it so no damage or clipped cable no damage or problem
What are the measurements of the camera because I changed it and there have been two punctures already?
Hey. Could you make this same guide for the Vsett 11+ / Super 72? Thx.
I have a Vsett 10+ and in my p settings the tire diameter is set to 10 in. I'm hearing that if I set to 9.8 let's speedometer will be more accurate. Also if I change the number of magnets from 28, to the proper 30 it will help the speedo be more accurate. Any advice?
@michaelpayton9475
2 жыл бұрын
You can use the tire diameter to dial in speedometer. You'll just need a good way to calibrate the actual speed. Don't change number of magnets.
nice tutorial
@RevRides360
3 жыл бұрын
Thank you! Cheers!
Hi guys just a quick question. If I was out and I happened to get a puncture would I be able to use the green slime preventer (green goo) as a temporary fix? Tia
@adamg354
2 жыл бұрын
It worked for me. I didn't even know I had a puncture until I saw green slime all over the back of the scooter the slime did its job after the tire pressure dropped. I had about 30-40 psi left when I got home and noticed it
is it possible to switch to solid rubber tires?
@RevRides360
3 жыл бұрын
Hello, we do not recommend switching to solid tires on the VSETT 10+. This scooter is too powerful for solid tires, and causes a safety concern.
At the moment i own a zero 10 x Love it! But i need more range! Would you recommend the vsett 10+R a must upgrade???
@RevRides360
Жыл бұрын
Thanks for reaching out! We recommend the VSETT 10+R or the Vsett 11+!
Very useful video !!!please don‘t delete it I gonna change mine soon🥲🥲🥲
Thank you for a great video. I have great use of it at the moment. I punktured my rear tire after just 20 km. My bad. I should have pumped the tire harder from the start. I wonder, where do you buy a new tube for vsett 10+? And i also wonder if you have a pump to recommend? Thank you again.
@adamsavo
3 жыл бұрын
Another very strange thing. My valvestem was sitting together with the tire. Impossible to move...
@dbrumf1
2 жыл бұрын
When I replaced my tube after i popped the original I found that they put a tube that was bigger that it was supposed to be in my tire so it was a disaster from the beginning
@janergaard
2 жыл бұрын
Concerning the pump, I just use the air compressor at work or at the gas station, but I think any hand pump will do nicely. You won't use it often, so I wouldn't splurge too much on it. Just make sure it is compatible with the flexible hose you received in your VSETT accessory bag, since most pump heads are too big to reach and actuate the valve. Innertube - Aliexpress - Horrible delivery times, but cheap: www.aliexpress.com/item/4000593813390.html?spm=a2g0o.order_list.0.0.12da1802nKjDM2 Innertubes - Amazon: www.amazon.com/s?k=innertube+10x2.5&sprefix=innertube+10x2%2Caps%2C155&ref=nb_sb_ss_ts-doa-p_1_14
Bonjour à combien de newton-metre serrez vous toutes vos vis ? s'il vous plaît merci.
Is the 40 ft lbs you used for this on the wheel lugs the same for the Vsett 11+?
@RevRides360
3 жыл бұрын
Yes, the torque spec is the same on the VSETT 11+.
Hello, greetings from Chile, sorry for the translation. How much torque in NM do you give to each part, brake disc, wheel motor, and wheel bolts?
@escobar1656
Жыл бұрын
5
Dude Got my first puncture today and this well presented video made fixing it a breeze [KZread] isn’t completely useless after all 💁♂️ Thankyou for putting this out there 👍
@sohaibalmahagri589
2 жыл бұрын
Lol "not completely useless" are you mad!
@BC4150
2 жыл бұрын
how long have you had vsett?...this is starting to sound like apollo scooters with regular flat tires
@markb3787
2 жыл бұрын
@@BC4150 a few months But I upgraded both the front and back tires to the off-road ones and havnt has a puncture since and have ridden over all sorts of terrain It’s a great scooter Just swap out the original tyres ✌️
@BC4150
2 жыл бұрын
@@markb3787 thanks for reply Mark, i'm close to purchasing this scooter and may as well do the exact same thing with the tire swap, thanks again
@markb3787
2 жыл бұрын
@@BC4150 you know about the white wire yeah ? (Goes much faster) 😜
Can you link the tools you used please?
I made it until detaching the wheel. But the 6 Screws, that locks the wheel (4:13). They are fastened so strongly, that i already broke one screwdriver while trying to loosen them. I tried warm water and oil to make it easier but it wont come off at all... Any ideas what else i can do?
@RevRides360
Жыл бұрын
Feel free to reach out to our customer support team (Service@REVRides.com) for further assistance! Cheers!
You take the brake disc off to protect it, right? In the case why not just loosen the split rim bolts a little while the wheel is still mounted? Then change the tire and tube, put the split rim back finger tight, replace the wheel and then torque up the bolts when the wheel is back in.
@rogerlane2282
Жыл бұрын
I know right. I was watching this and was like WTF!? This video is so whack.
Sorry for the noob question but what that tool with the 5 newtons that you use?
@michaelpayton9475
2 жыл бұрын
See 1:04 in video. Variable torque bit driver.
what is that hand green/teal hand drill for fixing screws? link on it?
@RevRides360
2 жыл бұрын
That is a torque wrench and you can find them on Amazon!
Would you say that all the hex bolts on the scooter should be tightened to the 5nm??
@RevRides360
Жыл бұрын
For further assistance, please reach out to us via email at Service@REVRides.com!
Anybody know where he got the platform with hole in the center ?
hello. what is the size of the tube for vsett10+ some guys told me its 10x2.5, the shop that i bought it told its 10x2 lol! im confuse thanks
@RevRides360
3 жыл бұрын
Tubes for the VSETT 10+ are generally 10x2.0. The tire size is 10x3. That could be the confusion. If you could get a 10x2.5 tube it would be fine but those are harder to come by.
Hi! I tried to change to semi off road 10x3 tyres but the screws cant reach all the way. Do I have to buy longer screws or go back to the slippery PMT's? :/
@RevRides360
6 ай бұрын
Great question. You should use the same screws but may need some help from a friend to squeeze the tire by hand so that they two halves of the split rim are closer together.
@MrSham3less
6 ай бұрын
@@RevRides360 alright! Also, when I unscrewed the rim with little force, it popped and there's a tiny crack. Can I still ride in a slow pace or can't ride it at all?
Please tell me where you guys get replacement bolts for the Vsett? I lost the split hub black bolts, anyone know the size of these things and where can I find replacement bolts..????HELPPPPP !
@RevRides360
Жыл бұрын
Thanks for reaching out, please follow up with us at Service@REVRides.com for further assistance. Cheers
I found a 13/16th AF socket was a better fit on the axle nuts that the 21mm. Thanks for the video, very helpful indeed.
@RevRides360
3 жыл бұрын
Good tip! Glad the video was helpful :)
does it have a connection that i can unplug it to the contoller?
@RevRides360
3 жыл бұрын
Yes, there is a plug to disconnect the controller.
this is great thanks so much! how would you say this compares to the wolf warrior?
@RevRides360
3 жыл бұрын
Tough to compare unless you had specific metrics you wanted to compare. Weight, speed, ride comfort, high speed stability, off-road capability, customizability, etc. I do know that the VSETT 10+ is faster in a drag race than a wolf warrior.
@Djkflow
3 жыл бұрын
@@RevRides360 how about an Apollo Phantom vs 10+ which is a better buy?
Was that an editing error? at kzread.info/dash/bejne/a5WiyNSnmMbNgtY.html you started to do the front wheel but only unwrapped the cabling and rewrapped it.
hi friend. what is the name of that glue to fix the rubber shields on the nuts?.. thanks 👍
@alexbaran8845
2 жыл бұрын
Thanks for reaching out! We like to use Gorilla Glue or a similarly strong adhesive! Have a great day!
I'm having major issues with my vsett 10+, first the trigger throttle stopping working, then under warranty I got a new one, now, after installed only the front motor works, ive check the wiring connection, all looks good, spent a lot of money on this, its had more down time then running time, now the rear motor doesn't work , any ideas?
@RevRides360
3 жыл бұрын
Depending where you you purchased from you should first message your supplier. This sounds like it may be a controller issue which I have not yet seen in the VSETT models.
@Sheisintomalakasdino
3 жыл бұрын
@@RevRides360 I purchased and have spoke to urban machina Canada, they have to ask manufacture, but the scooter itself came from Rev
Should the tire be able to move when reattaching the brake to the rotor?
@RevRides360
Жыл бұрын
Thanks for reaching out! For better assistance, send in a video of what you have going on to Service@REVRides.com. Cheers!
hi! nice video. where did you find that working bench? i need one exactly like that. thanks.
@RevRides360
3 жыл бұрын
Amazon has them. Search for hydraulic motorcycle lift table. I think it's called Extreme Max.
@themanonwheels5988
3 жыл бұрын
@@RevRides360 thanks!
Hi... Is it possible to apply sealant liquid inside the tire to avoid punctures? 🤔
@michaelpayton9475
2 жыл бұрын
Yes, it is. Remove the valve to do so. It doesn't AVOID punctures but, can heal small ones, once the sharp is removed. Follow the instructions on the product you purchase. REV Rides add Flatout to scooter tires before shipping.
One bolt is broken and im like thinking i need a welders help, the bolts used are just so soft
Isn't it possible to disconnect the motor cable so you don't need to force the tire over the rim?
@RevRides360
Жыл бұрын
Thank you for reaching out to REV Rides, please follow up with us at Service@REVRides.com for further assistance. Cheers!
awesome ide with rimm you dont need press or nothing !
Hey I ordered a vsett 10 will the scooter come with all the torque specs in the Manual ?
@RevRides360
3 жыл бұрын
The factory does not provide a full list of torque specs. If we develop one we will update all our customers.
@kj3313
3 жыл бұрын
@@RevRides360 well this video gives me some of the important ones thank u great video
why are there inner tubes inside of pneumatic tyres?
@RevRides360
3 жыл бұрын
This rim design splits in the center for easier tire changes, which means it cannot hold air without an internal tube. Wheels designed for tubeless applications do not have anywhere for air to leak out. Hope that helps!
whats that spray youre using on tire and tube before install, and why?
@n8_EUC
2 жыл бұрын
The spray we used is soapy water to help the tire slide on the rim so that when you add air it self centers better. You don't want to use any kind or oil because once the tire is centered you don't want it to slip. There is also a product called "tire mount lube" made specifically for this but soapy water works too.
@milordas
2 жыл бұрын
@@n8_EUC tnx
Thanks
Great video! I have a question for anybody with experience on this scooter, I'm 240lbs would you go with the bulkier vsett 11+ that's rated for higher rider weight? 330lbs compared to 285lbs
@speedforce131
Жыл бұрын
I have a Vsett 8 and weigh 230lbs (vids of the scooter on my channel). You can ride any of these scooters but what'll happen is that your range & maybe top speed decreases. On the Vsett 10+ and 11+, the decreases will likely be negligible if any.
Is this guide also applicable to vsett 9+?
@RevRides360
3 жыл бұрын
Yes, the VSETT 9+ will be a very similar process to replace the tube/tire.
What size inner tube is that
@RevRides360
Жыл бұрын
Thanks for reaching out to REV Rides! This scooter takes 10" tubes! Cheers!
Tyler what is the exact screw size for the disc brake rotor and split rim? Also why don't retailers make information like that known so we can buy more in case of stripping?
@michaelpayton9475
2 жыл бұрын
Spit rim M5 x 0.8mm x 20mm Hex-Socket screw Rotor M5 x 0.8 x 15mm Button head Hex Socket screw
@justinsarchive4111
2 жыл бұрын
@@michaelpayton9475 you're the man
@justinsarchive4111
2 жыл бұрын
@@michaelpayton9475 did you mean 16mm? I don't think 15 mm exist
@michaelpayton9475
2 жыл бұрын
@@justinsarchive4111 I measured the length and got 15 but, 16 will work.
@justinsarchive4111
2 жыл бұрын
@@michaelpayton9475 m5x.08x8mm
tyres on the spit rim types are super easy, most struggle with the ninebot, m365 tyres
@RevRides360
3 жыл бұрын
Yeah I don't mind them at all. The 11" tires are a bit harder, but these 8.5" and 10" tires are easy. Thanks for stopping by!
my rear tire is flat and the slime is getting out of the tube i am on my way to a friends garage and use your video step by step and try to change it i´ll will write you later how it went greetings from Cologne Germany
@RevRides360
7 ай бұрын
How did it go?
I hope you make video changing the bearings
@kj3313
3 жыл бұрын
Are u having problems with your bearings there is a guy that make a video on a different scooter I think it pretty much the same process on a vsett
Hi can i use 255x80 tire on vsett10+?
@alexbaran8845
2 жыл бұрын
Thanks for reaching out to us! You can find all tires we have available here on our website! Hope this helps! revrides.com/search?type=product&q=Scooter+Tires
Can gou guys able to oder more of vsett 10+,kaabo wolf warriors models as only scooter is such hard to fund its all zold of off any online scooters stores in any local states
@user-og3ur1qy8e
7 ай бұрын
I've always wanted them vsett10+ or any kaabo wolf warriors models One day we need to see them vsett 9+ with 60v40ah that be insane to keeping up most of any scooters 💯👌
@RevRides360
7 ай бұрын
vsett scooters is what we carry
Can everyone help me determine why my tire went flat last night. I was riding normal going down a residential street when all of a sudden my back tire kind of did a drift and that's how I found it was flat. Luckily I was not going 40 when it happened. Anyway I got back home checked the tire and there was no puncture marks or any nails or sharp objects so the problem had to be the tube. I squeezed some green tire slime into the tube and aired it up to find out it was oozing out everywhere but im still baffled as to how it happened. Will a hot motor do something like this because it was pretty warm? Or anyone have any ideas?
@alexbaran8845
2 жыл бұрын
Thanks for reaching out! Yes, a hot motor combined with elevated surface temperatures can cause tubes to pop. Unfortunately the only solution is to replace the tube, which can be found here: revrides.com/collections/all-parts/products/zero-inner-tube Hope this helps!
@daslaer6969
2 жыл бұрын
@@alexbaran8845 is it possible to get tubeless tires for this model of scooter
@schism6976
2 жыл бұрын
@@daslaer6969 no unfortunately. It's a split rim
This video in its entirety is LITTER 🔥 than the ☀ Great job T‼️
@RevRides360
3 жыл бұрын
Thanks man! The tire change is always a fun one to make. Lots of difficult camera angles here!
@OregonCrow
3 жыл бұрын
The fuck did you even just say?
Hi, thank you for this video. What glue for screw-thread you use?
@RevRides360
3 жыл бұрын
We use Loctite or Permatex Medium strength threadlocker.
I bored out one of the rotor screws and it was an absolute pain in the ass to get out. It took me like 4 months to figure out how to get it out but I finally removed it today. I used a flat head bit and a 22mm socket and banged it out like a chisel. Do not strip those heads
@RevRides360
9 ай бұрын
Dang sorry to hear that sounds rough Dont strip any screws always feel free to reach out any tie if you have questions
Is tightening your wheel to 54Nm good idea? thank you
This makes the decision of a rougher ride on solid tires for me. What a nightmare! I'm just gonna deal with the slightly poorer suspension and grip.
@benedictdunington602
2 жыл бұрын
Any developments? Did you buy a solid tyre ?
@schism6976
2 жыл бұрын
Exactly my thinking lol
Im able to order this threw your company?
@RevRides360
3 жыл бұрын
Yes, you can order tubes and tires for the VSETT 10+. Check out our parts listings on REVRides.com!
Thank you very much for your video !! Could you make a video , showing how to change the suspension for the Vsett 10 ( rear and front ) please?? 🙏🙏 I would like to put air shock one but I am very bad at mechanic … 👍👍
@RevRides360
3 жыл бұрын
Changing the suspension is a big job. We would recommend you take it to your local shop if you have one. If you are in the USA we have shops in nearly every major city that can work on your scooter. We will be doing a video on this in the future but it could be awhile. Cheers.
@fabianc1650
3 жыл бұрын
Many thanks for your answer . As you noticed ,my English is not very good .. 😁 I am French .. I will wait for your video or any video on KZread showing the way to do . Thank you very much
@joshuabehr2186
3 жыл бұрын
@@RevRides360 do you have any shops in the Minneapolis area? Looking at new suspension.
@TheMXpower06
3 жыл бұрын
@@fabianc1650 bonjour, j'ai eu l'occasion de changer l'amortisseur avant ( et ce n'est pas du luxe ) celui d'origine est dangereux. Si tu vois ce commentaire n'hésite pas à me demander plus de précisions.
@markhondaturbo
2 жыл бұрын
@@TheMXpower06 hello, what is wrong with the original shock?
Tyler is sooooo cute!!!!
That's an odd split rim! Mine the tires just pop off the opposite side. So it's not stuck on the engine wire. That's a dumb design
3:50 I managed to strip 2 of the screws keeping my brake rotor on, do you have any recommendations on how I could remove them? Thanks
@benedictdunington602
3 жыл бұрын
Same , they seem to be rather poor Quality, I noticed when turning the rest of them that the metal deformed.
@TheMXpower06
3 жыл бұрын
Same screw problem for me 😱😭🤬😭🤪 i used a DREMEL tool to dig a straight line, then i used a flat scewdriver and a hammer to unblock it. 💪😠 and sorry for my english 😔
@pabunko
2 жыл бұрын
Agreed, those screws are low quality. Why why why....
@EPICBLASIAN1
Жыл бұрын
Any ideas? I have one stripped screw on the rotor I can't get off.