This saved my vsett 9+, tubes kept popping including the warranty replacements. They’re a bit difficult to install but so worth it, i have had no tire slip or wobble after installing with these instructions, thank you!

@FalconpevSg

2 жыл бұрын

Do share any more experiences you have when installing the tires:) make a video and it will be very useful to others.

@Chocolatesideup

Жыл бұрын

Where did you buy them? I'm in Europe, where parts are generally more difficult to obtain.

@Chocolatesideup

Жыл бұрын

By the way, I pop inneg tires every 2 weeks 😢 and I'm only 70kg

@FalconpevSg

Жыл бұрын

@@Chocolatesideup yes you should try these honeycomb tires then, you will enjoy a puncture free ride

@Damadoore

Жыл бұрын

having the exact same problem here i went not 10 yards this morning and boomf second flat on my Vsett9 the problem is there's hardly no where in the UK that sells the Vsett9 let alone the solid tires.... total nightmare and please try to ignore all these people saying tube slime or yogurt slime for to prevent flats in your tires.... Honestly it's a waste of money, time, hope and effort I slimed both sets of my tires everytime and still always get a flat.

thanks so much for the understanding of the right tire direction and installment of the solid rubber tire

@FalconpevSg

Жыл бұрын

Glad we could help improve your ride experience

You guys are awesome. Seriously. You've been so polite and helpful via email it's unbelievable. I was sure you would block me because of my stupid questions. :) Keep up the fantastic work, the PEV community is so much better with you guys in it helping us out and the solutions you have!

@FalconpevSg

2 жыл бұрын

thank you for the support!

@Kylehudgins

2 жыл бұрын

Is it working out for you? Just ordered a pair

@Skobodirizz13218

10 ай бұрын

@@Kylehudginsis it working?

@Kylehudgins

10 ай бұрын

@@Skobodirizz13218 no. Went with 10+

VERY INFORMATIVE video. Now I can buy the scooter that I really want and just change the tires over to solid at the first flat. Before I was limiting myself to only scooters with solid tires and some of those manufacturers have switched over to air tires.

Are there any tiers for Vsett that makes 10 inch from 8.5 wheel? Similar to Xiaomy M365 has...

Can you do a video on an Axle change. The thread in my rear axle has been ripped so I need to change it..

On your website there are 2 options: with or without installation. Could you explain what does it mean?

Is it correct that these tires fit on the Vsett 9, Zero 9 and Techlife X6? I have the Techlife X6 and it's supposed to have exactly the same parts as the Zero 🤔

Great video, that would of taken forever to figure out. The only thing I would add would be a side by side with a fully seated pneumatic tire.

@FalconpevSg

Жыл бұрын

Great! Glad it helped you.

Thank you for this mam! Im trying to get a solid one si če Ive change emm like 8 already all were rear ones and i Got to the point where I already nearly gave up and sold the fckn scooter thanks for changning my mi d!!

@FalconpevSg

2 жыл бұрын

Try this you will like it

Would it be OK to run one of these on just the rear of a vsett9+, or would I need to change the front too?

@FalconpevSg

2 жыл бұрын

Yes just use any one side is ok

How is the ride and traction on those compared to the tube and air tires. Thanks

@FalconpevSg

2 жыл бұрын

we added extra threads and grooves but it will never be as good as air tires admittedly. its good enough for regular use.

Would you guys recommend to use only one Solid Tire in the back? Already had 3 flat tires in 6 months

@FalconpevSg

2 жыл бұрын

Yes if you use it for front and back it will cause too much vibration. So we recommend it mostly for the tire that punctures most.

Heloo, Where can I find this tire too?

Hello I just wanna ask if I can use 6s lipo battery for my apollo ghost?

@FalconpevSg

2 жыл бұрын

Better not. Li po and Li ion may not mix well

switched from Vsett8 to Vsett9 just to get the normal tires ;) Comfort is much better. The modification i would like is to have hydraulic or drum brakes. Tires can be slimed, but rotor maintenance is tiring.

@FalconpevSg

2 жыл бұрын

Hydraulics is possible too

@happyhusband312

2 жыл бұрын

@@FalconpevSg user acidkhmer commenting on your video "How to: Install ZERO 9 Front Hydraulic Brake" was trying to do this, not sure if he succeeded! i'd love any other brakes other than Zoom 160 which push the disc from one side only, warping it quickly.. unluckily Vsett 9 has brakes on the wrong side, so it cannot accomodate semihydraulics.

Where did you buyed that tire and what is the size of it?

@FalconpevSg

2 жыл бұрын

We sell it on website in description

Where can i order this tire?thank you.

@FalconpevSg

2 жыл бұрын

Check description

Hey I been getting so many flats on my Vsett 9+ I wanna order some solid tires. Will these tires work on my vsett 9+ ?

@FalconpevSg

2 жыл бұрын

Yes it will

@sirriddlemethis

2 жыл бұрын

Sorry to ask mate but how many punctures u had as I've had same issue with 9+

@FalconpevSg

2 жыл бұрын

@@sirriddlemethis too many

@Kylehudgins

2 жыл бұрын

@@sirriddlemethis way too many

@sirriddlemethis

2 жыл бұрын

@@Kylehudgins same here at least 10 in under a year

Can I have solid honey comb tires on a 10plus?

@FalconpevSg

Жыл бұрын

Not recommended

Will you also make a video on how to remove the honeycomb tyre? :)

@FalconpevSg

2 жыл бұрын

That’s the easy part

I have been trying to follow this video, but the screws have gotten so tight that they are bending snd the nuts are stripping?? What can i do about it?

@FalconpevSg

Жыл бұрын

we are here to help...can u send us a video to our email?

@grazz7865

10 ай бұрын

Definitely should not be that tight. Once it’s gets too tight, use the Allen key to stretch the tire over the rim.

This work on vsett 10+?

@FalconpevSg

2 жыл бұрын

No

Where can i get these tires? For my vsett9

@FalconpevSg

2 жыл бұрын

Here you go www.falconpev.com.sg/products/honeycomb-airless-solid-tire?_pos=1&_sid=4e1d907b6&_ss=r

Where do I get these tires ?

@FalconpevSg

Жыл бұрын

Here you go www.falconpev.com.sg/products/honeycomb-airless-solid-tire?_pos=1&_sid=4226cf3e3&_ss=r

I purchased the 8.5" x 2.6" for the rear wheel of my VSett 9+ and cannot for the life of me get the thing on. I can get the guide screws in and tightened, but I am completely stuck at the step where you flip and "lift" the tire onto the motor-side rim (using Allen wrench as lever in this video). The problem appears to be that the tire is just too small for the rim. The inner diameter of the tire is a few mm smaller than the inner diameter of the rim. So when I tighten the guide screws, the inner part of the rim just presses into the inner (ridged) part of the tire, it doesn't press through. There is only a few mm of inner tire material blocking the rim, and it seems like with some kind of industrial tool it might be possible to stretch the tire enough to get it over the rim edge, at which point I'd be able to screw much more easily. But I have been totally unable to get the tire over the rim edge manually, with either the technique shown in this video (using an Allen key as a lever in the honeycomb holes) or with tire irons. The amount of effort I'm putting in doesn't seem to match what's in this video. In this video, initial guide screw step the rim gets significantly further into the tire then I'm able to get it, and then in the "flip-and-lift" step, the tire seems to slide pretty easily onto the rim, where I can't get it to budge. I'm wondering whether there is maybe some subtle parts mismatch? I bought my VSett 9+ new in the US from Alien Rides (alienrides.com/). I assumed it was identical to the VSett 9+ that Falcon PEV sells, but perhaps I'm wrong? Is there some subtle difference in stock rim sizes between different batches of VSett 9+ sold in different countries?

@FalconpevSg

2 жыл бұрын

No differences in rim size so they should be the same across the board. Yes the tire will be difficult to lift, but use a longer Allen key to leverage it over the rim. That’s the essential step. As to why the tire is made smaller than the rim is by design. At high speeds and heat from the motor causes the tire to expand, a nicely fit tire will run off the rims easily. A tightly fit tire will not.

@SeanMackesey

2 жыл бұрын

@@FalconpevSg Thanks for the pointer-- I managed to succeed by using a larger Allen key as a lever. Can't stress how important it is to use a large enough key in this step, it makes it *much* easier!

@FalconpevSg

2 жыл бұрын

@@SeanMackesey thanks for the feedback!

@kevinhuynh8455

2 жыл бұрын

@@SeanMackesey man I feel like I’m using a larger one and I still can’t get the tire onto the rim part any other advice?

@SeanMackesey

2 жыл бұрын

@@kevinhuynh8455 I left it partially done for a while (maybe even before I had lifted any of the tire on) and I think that helped, it might've stretched out the tire a bit.

Hey I order the tires from you guys and I took it to my E-scooter shop and they said the tires and too small

@FalconpevSg

2 жыл бұрын

They need to follow the instructions in this video to install

Hello link buy 2021 😓

This tire does not fit my Zero 9. The width of the interior of the tire is 132mm and my rim is 145mm. In the video, it slips right on, in reality, 2 grown men could not get it to squeeze on. Using a screw driver and slipping it over the edge and then using the guide screws to squeeze it on only caused the guide screws to bend and eventually shear off. I do not know if I have an especially large Zero 9 or the tires I got were especially small, but I will be attempting to return them.

@FalconpevSg

2 жыл бұрын

The reason why the honeycomb tire is made smaller than the actual rim is because at high speeds, it will slip out of the rim if it’s not extremely tight. We will do a video to show you that it fits a zero 9 rim. It takes the right tools and some effort.

@JoshStaffordD

2 жыл бұрын

@@FalconpevSg I look forward to it.

Great , I think most of 8,5'' - 9'' and 10'' Tire should be solid one

@grazz7865

10 ай бұрын

Exactly. The tires are too small and too easy to get flats. Plus I usually ride on the shoulder-where all the glass, screws and debris end up

Would this fit the vsett 8+?

@FalconpevSg

2 жыл бұрын

The front

@mastertrevorman

2 жыл бұрын

@@FalconpevSg not the back aswell?

@FalconpevSg

2 жыл бұрын

@@mastertrevorman the back is already solid tire

@mastertrevorman

2 жыл бұрын

@@FalconpevSg so is the front. I'm asking if these tyres would fit as a replacement for when the original ones eventually wear out

@FalconpevSg

2 жыл бұрын

@@mastertrevorman no only the vsett 9

I've been trying to get the tire on for 10 hours. If the allen key is essential then you should have included one in the kit. My tire dies not just pop on to the rim like you show in the video. It's way too small and takes 2 of us just to barley get it lined up with the screw holes.

@FalconpevSg

2 жыл бұрын

Which part are you stuck at? Maybe we can do a video to help you

@gamerwithgiantbrain160

2 жыл бұрын

Use a big Allen key to pry the tire over the hub side rim and make sure you put down a cloth to void scratching the rim. It may seem impossible but it just takes a long time of prying and tightening

@FalconpevSg

2 жыл бұрын

@@gamerwithgiantbrain160 thanks 😊 for the tips!

so vsett 9 uses 8.5x2.6?

@FalconpevSg

2 жыл бұрын

Yes

If this works I won’t have to sell my 9+ 🥳

@FalconpevSg

2 жыл бұрын

You won’t

@sirriddlemethis

2 жыл бұрын

How many punctures are you getting as I'm getting a lot nd constantly have to repair

@ccchaosss

2 жыл бұрын

why you wanna sell it?

We have the VSETT9+ at home and it has been a major disappointment. The amount of times we have gotten flats can be counted on one hand… EVERY MONTH! Tried every kind of tire option. Even changing out the wheels is a horrendous process that was clearly not tested properly. Unless you are skilled with repairs of this type you are out of luck because you will not be able to change it. I wish there was a way to return this thing or swap it out. At this point it is nearly unusable because you can pretty much guarantee you will get stranded somewhere. Or maybe we just got a bad one out of the batch…

@FalconpevSg

Жыл бұрын

Hi Joanna we believe it could be a bad batch the problems don’t occur as much in our recent batches

@Aj-nzkiwi

Жыл бұрын

It's not hard to change a tube lol

@gameredits2.0

Жыл бұрын

Please polite question what is the best tyre for vsett 9+ thanks.