Steel Cart Mark IV Wheel Test One
www.coasterdad.com/steel-cart-...
After a few mishaps in testing the earlier steel cart, I came up with this design for the wheels. Let me know what you think of the prototype! -----
Please support me on Patreon - / willpemble
Here's where I post stuff:
/ willpemble
/ willpemble
/ willpemble
/ willpemble
And for the grownups among us who want to rock their business...
/ willpemble
www.goalboss.com
Пікірлер: 59
*The amount of work that you put into this: up vote and commendation.*
@WillPemble
10 жыл бұрын
Thanks, R Paul! It's definitely a labor of love. So much to do, so much to learn :) Thanks for watching! Best, Will
@AnonyMous-zx9if
10 жыл бұрын
You're welcome. Thank You. Peace. :)
Always excited for these vids
Dude. So happy I found you. Thank you for sharing your knowledge and experiements. I wish more engineers and creators posted as many videos as you. Can't get any good info!
Also with individually steerable assemblies like this, special track geometry is required. In curves you have to make the track gauge narrower since the effective horizontal distance between the wheel sets gets narrower. B+M, Intamin and all the other players that use this kind of articulation do this. On your tight curves you'll see the guide wheels pinch the track too tightly and bind up.
That was fun! The new cart chassis is looking good too.
superb desiign cant wait to see it done.
This was a great video Your track is awesome!
This is so cool, love it!!!!!!
Great work, so come to Australia and build one for my grandkids hey... lol
@WillPemble
Ай бұрын
I'm back and forth to NSW two or three times a year :)
These work BEAUTIFULLY will. You have a lot to be proud of. I suggest banking the track a bit more and adding lateral load supporting beams near the turns. Since your coaster is so small scale, the stresses usually localize more dramatically to areas and with this new steel cart the speed is going to be greatly increased. Just a thought !
@beckydavies4893
7 жыл бұрын
Good Moms
@beckydavies4893
7 жыл бұрын
Good Moms
that's super cool
beautiful
Hey Will, I really need your help!! I recently came back from a Theme Park and decided to look at Homemade Coasters and I've come across your videos which are insane. your videos have motivated me to make my own Rollercoaster in my Backyard. I'd like to know what Size PVC Pipe you use, how you made the Rollercoaster pipe bend to make drops and how you made the Wooden cart for The Caution Zone!! Please Respond - Sincerely Jeremiah
How did you make the wheel assemblies pivot and rock?
Can u give me links to where you bought the wheels
where did you get all that equipment will
What's the cost of 50 meters track please and where we can buy the design of our roller coaster.thanks.great videos, congratulations
How did you make the wheels be able to pivot?
How much weigh will it stand and will tje screws bend or come out with the wight
are you going to build a lift hill for this?
Amazing. I'm not sold on the PVC with 2x4 supports though. I see this was 9 years ago though. Is the PVC track still there and did it work?
@WillPemble
Ай бұрын
It’s long gone. UV destroyed it in a year. I now prefer building with steel! #StealIsReal!
U are an awesome inteligent man
Add some wheels for under the tracks so there will be a lower percentage of the cart falling of at hills at fast speed.
@gabess
4 жыл бұрын
thats what upstop wheels are before he lets go he says that he's gonna add them
Esses canos aí são de ferro ??
You're missing a roll axis between the front and rear sets.
Ever thought about making it fully automated. Chain lift, Chain dog, Mechanical brake, Brake Fin, Control Console, etc? Cool DIY project. Wouldn't mind giving ideas if you ever want to make it automated. (Systems Engineer)
@brandonmolnar5662
10 жыл бұрын
I work at Six Flags Magic Mountain and have gone through the ride mauals on how each component works. If you ever need a design idea I might be able to help. Also I have an idea on how to make a cheap and effective automated ride system using simple dmx control system.
Up stop wheels?
I love what your doing with your coaster I'm making one myself and I was wondering if I could buy this Steel Cart Prototype off you...the only thing Im concerned about is the width of the cart itself so I would need to know the PVC Pipe width and the wooden intervals width inbetween the PVC pipes, so I can adjust my track...The payment method would be through PayPal and I willing to pay 100ish USD...And I would need you too add wheels that go on the bottom of the tack for stability if you would like to do this deal please contact me though KZread, Thank You!
can you pls make a video on how to make a cart
hi will pemble. i live in denver. Can you build me a roller coaster with a 2 loops and a 2 corkscrews and on the 2 steel cart, like a Multi-Inversion coaster. i would like a lap bar restraints on carts please
Where is the bottom wheel?
@WillPemble
Ай бұрын
In this video, the bottom wheels (called up-stop wheels) hadn't been installed yet. I was just testing the new wheel assembly design. The final cart and wheels definitely had up-stop wheels.
u should add a wheel underneath so it wont fall off the track
So the cart did not have up stop back then?
@WillPemble
Ай бұрын
Not at that stage of the build. I was just testing the new cart design.
This is so cool. Someone is definitely going to die on this.
@kookyevents6316
Жыл бұрын
I die laughing:))))).with the right safety..will be ok.
u are awesome
I'm just wondering if you needed a permit to build that.
@digimaks
6 жыл бұрын
..only in USA people ask such question... And after that they claim they are the free country, yet cannot do anything without asking for permission from Big Brother.
@gantryodie5558
6 жыл бұрын
+digimaks...PREACH 👍...but will go and tell everyone else how to live...can't hang clothes on line outside. .can't park in front yard..can't BBQ in yard..can't do home repairs...ect ect ect. .
0:12 when a 14 years old treis to build a coaster btw 2019???
create a manufacturer with other backyard coaster makers
I challenge you to build a roller coaster 40ft high because this rollercoaster looks 25ft
You should make it go backward
would you adopt me?
@Pr35t0nYT
3 жыл бұрын
I-
ปากมากแท้บักอันนี่แหม!!
You were bored
Always excited for these vids
@CoasterConnection
10 жыл бұрын
Same :D