it's not the controllers fault over 90% of the the case the battery cant deliver the amps.... writing this before i have watched the video to the end^^

@EVCustoms

Жыл бұрын

Yes I knew that the battery wouldn't hold up to pulling the controller, because the cells inside they are not High Drain, they are only for capacity. I changed the controller because the customer wanted a sine wave controller to begin with, and then as soon as he finds money he will also change the battery to high power..

@salviaaable

Жыл бұрын

@@EVCustoms i got the same bike, with 72v 30 ah battery, 3 kw motor, and sabvoton 45A controller and it's good for me, good top speed and battery are holding up even on low charge...

@antonypartali

Жыл бұрын

@@salviaaable My friend you understand for 45a controller don't need something special.. But for a 400a e-bike you can't buy all the parts at once because of the money (except if you have them) ... So our friend start with the controller (it is manageable), then he will upgrade and the other parts (battery, motor, wiring, brakes...) The basic here is that the upgrade make it from professional guys EV-CUSTOMS, knows very good what to do and our friend bike works without problems..😉 That's the fun of a tuning process... When you starts never stops...😘

Definitely love, LOVE the 3D printer. I can see that you didn't really feel comfortable drilling more holes in your frame. That's why I have a big, dorky mount on my fat bike for the controller and wiring. I used 1/2" HDPE and it's kinda heavy. I'll look into those printers. It would make my builds so much cleaner and stronger.

@TheEliteShatter

Жыл бұрын

Is this 400x400 build plate? I have the Anycubic Chiron just curious the potential difference in size

If I had that frame, I would get the Garmata seat and put the controller in the rear, that front mount will impact on landing.

Could I request an in-depth look at how to put the cups and bearings in to make up the headset its my first time building and I feel its the only thing keeping me from finishing

I love the 3d printed casing you made for it. Could you make me one for a ND72450? I just got it delivered today. Super excited.

Where do you get the signal lights for the front of the bike?

Wish my bike was as smooth as this he's got instant throttle the factory replaced the controller and display it worked for a min than something cut out the throttle completely frustrated

how? I am asking how about the seat I bought one myself and am building mine from scratch. but my seat doesnt fit on that frame, my motor 150mm doesnt fit for my 150mm motor the axle is to big

Είσαι σε άλλο επίπεδο ΚΑΛΛΙΤΈΧΝΗ μου!!😁😘 Πες τον φίλο (ιδιοκτήτη) καλωσήρθατε στο club (upgrade)😁😁

@EVCustoms

Жыл бұрын

Ela re Antoni.. xaxa tou to metefera...

Hi ,i live in uk interesting in buy the box you printed for controller,or can you send information so I can get it print in uk please.

👍👍👍👍👍

hey so i want to build an enduro e bike but one guy says i need a fuse and extra stuff and another says that stuff is built in and i’m not sure who to go with.

@TheTeenageWoodworker

2 ай бұрын

Get the fuse U can't be to sure if U don't have fuse the you are going to get blown up

top vido ...........

@EVCustoms

6 ай бұрын

thank you👍

how do I recover the current used by the electric bike ,,

....and a new battery customer. 😁

@EVCustoms

Жыл бұрын

😁😁

I'm currently building a 2000w hybrid cargo mopet and your videos are great help because most of this stuf is unlabeled I'm very well educated in electrical stuf but I stil need to know what wire dous what and how. I'm probably going to get the controller you have here it looks a lot more professional than the 3000watt unit i have now simular to the one you removed in this video I love that yellow

@Vmaxfodder

10 ай бұрын

How's it working. What did you get?

That model looks like the knock off stealth bomber

@factory4642

Жыл бұрын

So what is it a stealth bomber clone?

@arqhies_youtube

Жыл бұрын

Definitely it’s got weird side panels

@jonezdatonetech2758

11 ай бұрын

Dah ??

Was justgonna say thebatterywill not copewith it at all lol

I've just bought ND72680 controller but damn, the Android app is CHINESE:((((((( HOW CAN WE GET ENGLISH VERSION?

🤟👽🚲🎬

What is the battery dimensions

ND 96530 is no slouch!

I want to watch you do a Nucular P24F controller learning board guide and setup. ❤

@EVCustoms

4 ай бұрын

Unfortunately i don't have any Nucular controller

@digitalbilly

4 ай бұрын

@@EVCustoms in case you get one please make a video!!!!

Hello mate i just found your chanel !! Nice videos? Do you live in Cyprus? I have an electric motorcycle that i build my self.. I am using Two 60 volts lipo batteries 40 amps bms connect in parallel for a total of 60 vollts 80 amps battery pack( voltage is 70 volts when is fully charged). I am using a cheap universal ebike controller .. it is working perfect for 6 years now .. the only problem is top speed only 50 kmh .. Can you help me to upgrade my controller? Do you have any extra that i can buy from you? 😅

@erhaneroglu3464

5 күн бұрын

Hey bro can you help me ım useıng ebıke lıke your ebıke and ı wıll buy e new controller but ı have no ıdea so can you tell me your name of controller or wıch amp. I must buy ? Batteries 60 volt lıpo(max70volt) the motor 2000watts 3gear

Is this the actual stealth bomber?

@thomassharwin5310

Жыл бұрын

Nope it would smoke a real stealth bomber

Oh did you get 16V voltage sag on take off??

@EVCustoms

9 ай бұрын

Hi... what you mean?

@MrDeceptacon88

9 ай бұрын

@EVCustoms near the end of your video you said 16V down

@EVCustoms

9 ай бұрын

Ah.. yes the batteries are not high drain.. they need replacement..

@MrDeceptacon88

9 ай бұрын

@@EVCustoms so it was 16v sag when you accelerated?

@EVCustoms

9 ай бұрын

@@MrDeceptacon88 Yes..

Get garmada seat

Nice work man Can I please buy one of those 3D printed cover that you made ☝🏾? Hit me up please…

@EVCustoms

11 ай бұрын

Thank you mate.. have you any email?

@jonezdatonetech2758

11 ай бұрын

@@EVCustoms I posted my email yesterday but I don’t see it anymore, did you receive it ?

@mdstanley7052

2 ай бұрын

​@EVCustoms, please email me the invoice for that awesome 3D printed cover.

can you share your print for the holder for the controller the .slt plz

@EVCustoms

8 ай бұрын

Hi.. send me your email

@XXHellBig125XX

6 ай бұрын

@@EVCustoms never receive anything

@EVCustoms

6 ай бұрын

i didn't see any email... send it ti on messenger on Facebook

@XXHellBig125XX

6 ай бұрын

done@@EVCustoms

Staroe vidio....

@EVCustoms

Жыл бұрын

😁😁

450 phase amps

If you get a rear flat, you'll need to do this entire video in reverse in order to get the wheel off far enough to change the tire. -Just sayin'

@EVCustoms

Жыл бұрын

Yes this change need time... 😅😄

@lightdenied

Жыл бұрын

maybe a custom extension cord??

@tacticooldennis

7 ай бұрын

Its not that hard to remove. But it defiantly sucks compared to a normal dirt bike. I've done it at least 3 times. I just lift it up under a ladder, drop the tire down on a blanket and swap the tire. You have to replace the zip ties on the side of the swingarm, but that's the easiest part. Newer ebikes have a disconnect located on the swingarm.

@joeblow6756

7 ай бұрын

​@@tacticooldennis that would be easier for sure, but for one, if you ur building one of these from scratch, you'd need to have enough know-how to keep that in mind at the start of the build because the way ur describing won't work on some of these bikes that come pre-assembled. Like the ones from ebay or alibaba or whatever. My bike for example that wouldn't be possible. With where the controller is mounted and how snug all the wires are, there isn't even enough leeway for me to get that back wheel off without doing the whole video in reverse. The leads just aren't long enough. And if the swingarm is jacked up on a stand or ladder or whatever, the legnth of the wire is too short that it prevents the wheel from even touching the ground. It's just not long enough if you can believe that. (but wouldn't expect any different if you consider where it was made/assembled lol) Also, if you tug on those hub leads too hard you can damage it in a way that involves having to rebuild the hub to a certain degree. In the whole process, you risk damaging hall sensors if you're not careful or don't know what you're doing. And I've had two flats on this damn thing so I've done the video both forward and in reverse twice already. I told myself that if (when) it happens again, then F this thing and it's getting replaced with a Sur Ron or Talaria or something along those lines. I didn't even mention in the last comment that every time that hub comes off, it needs to be recalibrated or the speed/mileage won't be accurate. You have to do that whole process with putting it in calibration mode and walking the bike 10 feet and that whole nonsense. What a hassle for a flat tire. I wouldn't say it's difficult, but it's an enormous pain in the ass. And completely unnecessary. There's so many better ways. Lately, I'm seeing people using xlr audio jacks as the battery disconnect on some lower voltage bikes. Smart. The thing is that most ebike riders (out here in southern California anyway), aren't very mechanically inclined. They buy these bikes without any knowledge of basic electric/electronic circuitry and could barely change a tire on a non-electric bike. So for the everyday joe schmoe, changing a tire on one of these rear hub motor bomber clones is gonna be a monumental challenge. And most shops out here won't go anywhere near these. So they all wind up getting parted out on FB marketplace.

@tacticooldennis

7 ай бұрын

@@joeblow6756 Yeah I came from both a dirtbike and computer background so working on my Alibaba stealth clone is pretty easy. I just replaced a tube this week, and sure enough a new tire arrived today, so now I'm debating taking the whole thing off again, cutting zip ties fighting the rubber so I can go with a Shinko vs a bald knobby I'm running. I see on the real stealth b52's have multiple connections that separate at the crank. kzread.info/dash/bejne/dImOpapterqxmdY.html I run a Kenda rear with a ultra Michelin Ultra HD tube cause I hate flats. I still managed to pinch it with a spoon on my last tire change.

Thats not votol its fardriver controller

@EVCustoms

Жыл бұрын

Oh my good sorry!! thank you mate

Yasou, long time subscriber, you have helped me in the past. I have a Clone Sabvoton ML7280 contoller, however no instruction how to connect, there is 1 single grey, I cannot work out what it’s for 🥹

@EVCustoms

Жыл бұрын

Hello man... gray mist be with metalic connector, phase meter (input)

@THEPAINOFITALL

Жыл бұрын

@@EVCustoms Thanks for reply…is that a learning wire? 😳 Where to connect?