Honest, Informative and straight to the point. Nicely Done! Keep up the good work.

So much to learn in 11mins 🙌🏾

Dude! your videos rock! i cant believe you only have 104 subscribers! you just gained another one! keep up the great work and you will pass 1,000 quickly

@JZEV1

Жыл бұрын

Thanks! Genuinely appreciate the support. More videos on the way!

Hello. O my god happy i am not alone to have 2 sabvaton burnd out the transistors. First tim i send it back and they fixed it. But now it happend again. And i was starting to look around for a fardrive esc. This is how i found your video. Sorry if my English is not perfect, i 'am dutch😂 Nucular is nice but so expensive! Greeting from Wim

@JZEV1

11 ай бұрын

Glad you found the video relatable! This seems to be a common issue with the sabvoton controllers. It was very frustrating for me and they would not fix mine. Definitely recommend fardriver!

Yo this is good! Always impressed with your stuff

Thank you, best vid I have found, keep up the GREAT work😃

@JZEV1

Жыл бұрын

Thanks! Glad you found it useful

thanks man, you explained it the best! one note, for regen breaking the more MaxCurrent Amps you put the more it will break, and the percentage is in regard of StopBackCurr and MaxBackCurr. shame you don't have screen, cant find anywhere explanation on how to set up different screens...again big thanks for explaining everything!

Great far driver video

Nice video..,💪🏽 i got the 5000w Bomber with a sabvoton 150...my bike does 45mph and 53mph with my son...im like 200lbs though...im going to order a Fardriver ND72450 righ now....i want go faster..😂😂

Super setup advice! One thing: No dead zone and 224 degrees of throttle step are an accidental ghost bike into a wall moment waiting to happen. Leave some head room in the low and halve the step until it’s too granular (progressive) for you. I stay under 30 steps for walking mode at quarter throttle. Great work keep it up!

@JZEV1

Жыл бұрын

Thanks, appreciate that note! Looped the bike coming down from a wheelie the other day and I think having some deadzone might have saved me😂.

Hello. I have a scooter with a 72v50ah CATL battery, with a Votol m50 and a 1000w Rayan motor. I would like to know how the BMS would be configured from the app. I have an ANT BMS 8s - 22s 80A continuos peak 200A installed

You do good work, ant bms 101 would be awesome,

The ant bms do you prefer it over any other bms?

Hi bro do u no any good tunes for the fardrive nd72530 350/530 phase

How do i get my BMS settings, I just ordered the same controller

Hey where did you buy or have your battery built? I am trying to build a bike with a fardriver nd72530 but all the battery makers have a max bms of 100a that i have seen. Let me know how to get a higher bms battery.

How does your controller that your braking in order to regen? Can you just put EABSWhenReleasethrottle

do i need to configure my ant bms or does it just tune it

I went from sabvoton to Fardriver and now on a Nucular 24f. Would never go back to Fardriver or sabvoton again. The Nucular has so many features and just works perfectly along with readable manuals that you can actually understand. You pay more but worth every penny.

@JZEV1

Жыл бұрын

Yeah not having understandable explanations of parameters is a big minus. I’d try nucular If it wasn’t so expensive. Going to try a VESC next though technology seems promising

@williammadisondavis

11 ай бұрын

I got a VESC. Makerx g300. Cost about $350 has Bluetooth, no need for display besides for the app on my phone, and does 500a. Running it at 13kw on an 72v molicel battery and it’s yet to get warm.

Hello, we are ANT bms, shall we get connection?

Where do you get the fardriver app?

Bro thanks soo much

soy nuevo en el mundo de las motos electricas, quisiera saber como subir el amperaje a mimm bms para que le de mas potencia a mi motor

Yo! Does that 240 in the background run? That thing looks SICK!!!!!

Instructions unclear, my E-Bike now stutututu.

Tysm

Proper!

throttle voltages as a standard are 4.1-4.2volts

how can j make it so that it only charges to like 90 percent instead of 100. i heard charging to 100 makes the battery last less

@JZEV1

11 ай бұрын

You can probably set high cell volt limit in BMS. In my case, the charger I use has a selector to choose between 80-100% charge.

underrated video. Where did you purchase your FarDriver controller? I am still using a Sabvoton on my 5000W build and been looking at the FarDriver.

@JZEV1

Жыл бұрын

Definitely worth the switch. I was actually able to find one locally on Facebook marketplace, but aliexpress should have legit ones.

@alexchavosaurus9041

Жыл бұрын

@@JZEV1 I Think I found one. I guess I would just buy the 530 Phase Amp model.. I am unsure..

@JZEV1

Жыл бұрын

@@alexchavosaurus9041 what’s the continuous discharge amperage of your battery?

@alexchavosaurus9041

Жыл бұрын

@@JZEV1 Continuous current is 100A I believe.

@JZEV1

Жыл бұрын

You would probably be fine to use the 72360 for that. Its a good bit cheaper and does up to 170A DC

Hey, your wheel size is 26 fat? Same as my enduro. What tires are those? And are your spokes 12g? If they are 12g, how safe and stable is it going at higher speeds? As in over 38mph?

@JZEV1

11 ай бұрын

The rim is stated as a 19 but I think with tire it’s closer to 25-26 OD something like that . I don’t think it’s a fat tire, they call it “turtle” street tire. It performs pretty well at all speeds, my only issue is they aren’t perfectly balanced, so past about 50mph the vibration/imbalance becomes noticeable. Need to balance the front wheel and also motorwheel at some point.

@slugzkea

11 ай бұрын

@@JZEV1a simple wheel true will fix that. i hit 80km/h on my new one recently. it's 26 inch 4.0 fat tires, 12g spokes. i did true them before i headed out though, didn't notice any shaking...just worried of a catastrophic failure at high speeds since i am heavy (240lbs) but I've searched everywhere and haven't heard of 12g spokes failing on enduros...anywhere.

@anthonymoy4471

7 ай бұрын

Just check them regularly like any bike ​@@slugzkea

Have a link to ant bms app?

@JZEV1

Жыл бұрын

apps.apple.com/us/app/ant-bms/id1639257625

Sadly my regen still not working.

The max is 4.1v on the throttle

You can test your throttle off the bike with a single Li ion cell and a multimeter

@JZEV1

Жыл бұрын

Smart, will do

@dkremeni633

10 ай бұрын

how?

Hi mate are you on Facebook where i can msg you about a 5000watt rear hub kit i have got need some info

@JZEV1

11 ай бұрын

Yessir Jalen crittendon on Facebook!

@deanbadhamswilliams2047

11 ай бұрын

@@JZEV1 thanks mate just msged you on Facebook

Don't think you have your ratios in speed definition/usage correct. From what I was told this tells the ecu when to turn on the weak and what percentage of weak to use. With it set at 100% its telling the ecu to use 100% battery power and no weak. Does your ECU show you going into weak mode ever with those settings? If you put them all to say 80% it would use 80% of the battery and 20% weak etc... At least thats how it was explained to me.

@JZEV1

Жыл бұрын

Yeah your correct, I did get that part a little wrong. My setup still works great with the described setup, but it isn’t taking advantage of field weakening at all. Will do another video diving into field weaking once I test enough to have it figured out

KO controller is a rebranded fardriver

@JZEV1

Жыл бұрын

Really?? How do they get away with selling it for so much😭

@JuanJDumeP

Жыл бұрын

@@JZEV1 the red paint

@JuanJDumeP

Жыл бұрын

kzread.info/dash/bejne/gWqI0LdtiqWZpc4.html

Ko controller is fardriver clone, wonder if ko motor is rebrand qs165v2 wouldn't surprise

just updated the app and 2 new features are added

@JZEV1

Жыл бұрын

Is it android only?

@JuanJDumeP

Жыл бұрын

@@JZEV1 not sure but I am on Android. New updates adds 2 new lines.

@JZEV1

Жыл бұрын

@@JuanJDumeP interesting, do you know what they do?

@JuanJDumeP

Жыл бұрын

@@JZEV1 not sure yet but they are labeled CustomMaxLineCurrent_ and CustomMaxPhaseCurrent_ maybe it's a way to unlock the max line current but idk why they would do that. My controller can pull 450amps I have no battery to test this. ND72850

The KO controller is s cheap clone of the Fardriver. They cloned the cheapest model so it so it’s nothing great. BAC 4000 or 8000 is next level … preferred controller for stunters and racers.

Hey man Reach out to me. I have 40 Fardrivers in stock and have setup and tuned the Same amount. I would be happy to share some info with you

@MrDeceptacon88

Жыл бұрын

40??? Wow! Would you know what weakresponse does??

@Ebikemikeny

Жыл бұрын

@@MrDeceptacon88 yes i do.

@MrDeceptacon88

Жыл бұрын

@Ebikemikeny can you let me k ow what weakresponse means?

@JZEV1

Жыл бұрын

@@Ebikemikeny how can I contact you? Would love to get some more information

@alexchavosaurus9041

Жыл бұрын

How do I purchase one of your controllers? haha

Dont do it Man!!! Dont mess with specs man!! You will face a fire unlike any other you have seen! Yeah it works after doing these DIY Hacker tricks but time leads to specs being off from the safety range of power being induced to all 3 components of motor, battery and controller. Yeah its fine after 2 days but man, your shit will explode if not rapid fire. These DIY videos done to impress but its a lure of a fire yet to come. Why do you think e bike makers have different and various spec ranges of their set ups? Im sure some guys know their stuff but only until they find out later of the mistakes and will not do a follow up from being possibly sued or worst Agents at your door of serious mis information laws...

I can't stand the far driver software . I like to go to play store and download load all my software . Don't like to sideload shit from web page or some thirty would site..like far driver ...I will not use controller where it is unable to download load from their website fukem

@JZEV1

Жыл бұрын

Agreed man, it’s aggravating and hard to use and understand. Even the official documentation on their website hardly makes sense. I’m going to be using a VESC and VESC TOOL for my next build. Far more customizable and software is legitimate.

Do you have a parts list or suggestions in case others want to build a similar bike? Thanks!

What does weakresponse do?

@JZEV1

Жыл бұрын

I believe it controls how much weakening is used (spinning motor faster) and that lower values = more magnetic weakening and more Rpm. I think 0 is the most but I’m not positive.