This is an excellent video explaining how things work. You are a master; I like the broad illustration you use to explain its function.

@EVCustoms

Жыл бұрын

Thank you man, glad to hear that..

@user-blankman

Жыл бұрын

*GrandMaster

@EVCustoms

Жыл бұрын

😊😏😅

@mohamedshafeelmohamedbilal6364

11 ай бұрын

@@EVCustomsso how regenerative brake wiring get connected? By high brake or else specific for some controller?

@EVCustoms

11 ай бұрын

To actvate low brake it must connected to GND, To activate high brake it must connected to high voltage of battery RED wire..

I am making an electric wagon to pull my wife at a music festival. I integrated a twist throttle into the handle and it will have 2 12" hub motors. Your video is a blessing as I've never tackled anything this ambitious! You are a lifesaver.🙏Thank you.

@EVCustoms

3 ай бұрын

Thank you my friend..

Are you an Educator? I joined IBEW in 1968, and have an AAS degree. Never through my educational pursuits have I seen such clarity. I have to give you the G.O.A.T. Award (greatest if all time). Be Blessed!

@EVCustoms

Ай бұрын

Thank you friend, i appreciate that..

Great video, you have explained far more than the manual and helped save me from frying my controller. The display board was genius, I watched a few other videos and the clump of wires just jumbled in my mind. That board with labels was a huge help.

@EVCustoms

8 ай бұрын

My pleasure 😁

Best video on explaining controllers. I thought the high break would have stopped the motor spinning

This is what explanatory videos should look like. best man thanks greetings from Germany👍

@EVCustoms

18 күн бұрын

Thank yo man..! hello from Greek side of Cyprus!

Great video! Amazingly clear and helpful, thanks

Very good English-speaking. Thanks for the informative video.

Am been waiting for this Thanks a lot !!! Most appreciated

Thank You for taking the time and the effort to making this video, May all your days be of happy days.

@EVCustoms

10 ай бұрын

Thank you for kind words my friend..

Awesome video! I love the learning board

I am from, india, i like ur explanation, thankq sir

This is an excellent video.! Super helpful! 👍👍👍

I think this video was made just for me, thank you signé basile

Thank you for your demonstration, and your time

What a great video, learned a lot of useful things from it

Best explanation in KZread ever

Great video, and your English is brilliant, ❤ from the United Kingdom

@EVCustoms

6 ай бұрын

Thank you very much my friend...😄 !

What a great learning board!

Very good explanation. Can you please make another video to show all the functions, such as three speed, cruise controll , reverse connections.

Thanks for this Educational video

Thanks from Tijuana Mexico, you're the first who explain perfectly this system. Again thank you very much. Just a question. Where is the battery charger connector? .

Thanks for this awesome video been i while since i programed a controller. Great refresher ❤️🙌🏽👌🏽

@EVCustoms

Жыл бұрын

Thank you mate!

Good video! I’m about to start my first e-cart

Very informative. Thank you Sir for sharing your knowledge.

@EVCustoms

Жыл бұрын

Thank you friend..

I really enjoy your test board ! Excellent video Thank you

@EVCustoms

6 ай бұрын

Thank you man 😉

Excellent video thank you

Sir, you are a master educator and make society better for everyone 👍🙏

@EVCustoms

4 ай бұрын

Thank you very much my friend!

Extremely clear and helpful~

@EVCustoms

Жыл бұрын

Thank you my friend...

Thank you soo much for this video i wouldn't have known the difference

Excellent video my friend thank you usa California

nice 👍 video and info full detail wairing controller wearing and throttle wearing and hub motor and key such wearing thanks 👍

Good explained ❤

Very helpful Thankyou for sharing.

You should find a way to mass produce your E-bike Mother Boards for Testing connections. To be able to take the parts and test what they know about the assembly is worth paying for. The Mother Board is an easy build that will ship well and save lives at the same time. Mother Board / Test board.... Same thing. This has huge potential. Too many people are making Home Made e-bikes and they don't know what they've got until it fails, or even worse. A good Testing Mother Board would keep us all safe. The big problem would be that people buy the wheels all ready spoked to the rim. A Stand for the Motor that's Vertical would need to be included or offered as an accessory. You could take an entire wheel with tires and do diagnostics with a simple heavy duty stand. Just something to think about. Love all your videos. Thanks for all that you do. You gave us all a gift.

@EVCustoms

Жыл бұрын

I will keep in mind that... thank you Jim.

Very informative!!

Thanks great video,is it possible too hook up a wireless remote on these controllers?

תודה רבה. הסבר מעולה

Excellent video and very well explained!! Question: where do you get the energy for the LED in the control panel? I'm in the phase of planning to build my first e-bike and I wanted to create some custom Panel with LED for more info on the bike (ex: blinkers, lights, Kickstand down [cutting throottle], etc...)

Excellent video I know want to make this board for my ebike shop

Very informative 🎉

Simply and genius . Thank you

@EVCustoms

6 ай бұрын

Thank you mate!

Excellent video my friend!! Super useful! Is there a way to replace the low or high brake level with a switch? Maybe we could save room in the bike?

Very good. Thank you.

Beautiful explanation

@EVCustoms

Жыл бұрын

Thank you mate!!👍

Excellent

All thanks brother

Very good tutorial👍👍👍

@EVCustoms

Жыл бұрын

thank you mate!

Muito obrigado pelo esclarecimento

Amazing video

@EVCustoms

Жыл бұрын

Thank you mate!

ΜΠΡΑΒΟ ΑΛΑΝΙ ΜΟΥ...ΤΕΛΕΙΟ ΒΙΝΤΕΟ ΟΠΩΣ ΠΑΝΤΑ...

@EVCustoms

Жыл бұрын

Na sai kala file Emmanuil

Very good spalen sir 👍

Great Video, thanks, so I take it that tere is no way to power a brake/stop light on a Low-Brake system?

Kinda new to the ebike stuff. Is it required to connect the break system? If not connected, will the controller drain the batteries? TY in advance for your advice.

I habe a question. On my controller dont have PAS sensor connection or pedal assis just Throttle option. But on the bike have Pedal assist sensor (magnetic) 3 wire +,- and signal and on the lcd also i can setup the pedal assist power. I was thinking to connect it to Throttle wire, but i want to know if is possible or what choices i habe before i messing something up.Thanks and keep up the great content!

ΑΔΕΡΦΕ ΣΕ ΕΥΧΑΡΙΣΤΩ ΠΟΛΥ!!!

@EVCustoms

Жыл бұрын

Na sai kala file!

Wanting to make a smaller mobility scooter for my mother. With both back wheels so you reverse polarity to get them to go the same way?

Tnx for the video, before I used my high brake for break lights and used my low brakes for kill switch ( anti theft) without knowing the difference of them😁

Hi how to test or know if the current harness is for low or high brake? For changing/reolacing of defective controller. Thanks

thanks for the instructions. it really bothers me not understanding what l/h break wire are? any on can help explain display wire?

Super helpful! Love your stuff. Any chance we could talk you into showing us how to wire a 12v brake. I recently got a sabvoton 72150 with this option and I'm trying to find out how to wire this guy. Thanks for all your videos!

Can you please tell me if there is something to hack my pro 2 with ble 157 without buying another dashboard??

Is this kind of breaking regenerative?

Can you post a video on how decrese current flow beacuse my new controller makes motor to run very fast at hihh torques. thid video is really helpful.

You used a high voltage lamp in the high brake system, so how should the wiring be when using a 12v converter and a 12v lamp?

sensacional 😃😃😃😃😃😃

nice video thx

@EVCustoms

8 ай бұрын

Glad you liked it!

Hey, can I hook up my EABS thumb brake which has 3 wires to a controller that only has 2 pin wires😮 for brake?

thank a lot

i love your videos...very detailed ..is there any way you could sell me one of those boards that you make or can i order it somerwhere?

What does the e-bas option do?

Mr pardon me , i made my bicycle become e bike, acording to you , should i put on the low brake and hi brake system , i need your opinion , thank you

The tunnel system of your wires letting out on the element of the nodes to the motor. What is the time frame the wires produce even current during use for motor field attributes

Great video as always !! Does the "High" brake have to work off battery voltage or can it use the 12v from a step down (12v > 5v) ?

@EVCustoms

Жыл бұрын

Thank you mate, High brake can work straight from 12V, at 5V volts i didn't try it yet.

In my controller there is also an option for ebas two wires that come out of the controller and connect to each other, do you know maybe what it does???

Have you ever gotten the 3 speed switch to work on the Yuyang King controllers? I have a YKZ7280JA and i can't seem to get the 3 speed to work. Not sure if i have an app settings problem ("Overspeed On/Off" settings?). Video suggestion may be? Also on the "Adjust Accelerator Curve" settings and how it works

@EVCustoms

Жыл бұрын

Hi friend.. if you connect from three speed wires you bypass the app... so i think the problem is something else..

Can i hook up without the pedal assist installed? I hooked up everything except pedal assist and display comes on but no power going motor if i twist accelerator.

Superbe explication même que je comprends pas la langue

what if the high brake is on and we force the dc motor to move, can that damage the hall sensor? or when in high brake the dc motor can't move at all?

Could you do a video how to identify wires from a controler that is not labeld

Hi ! how can i install the brake light using only the Low level brake? Im scared using the High level brake due to its high voltage,

my controller states "low brake" on the label but the brake cut off connector is 3 pin, so are only 2 pins being used?

My motor is 48v 1000 watts. Hall sensor outputs have extra white wire. What does this cable do? Can you help me. No room for white wire in controller

On the controller that he is testing, high and low brake do not engage regenerative braking. They just cut the motor power. But on some controllers low brake engages regenerate and high brake engages battery powered braking (which uses battery power to reverse the motor). There may be tabs on the circuit board of the above controller - ABS, EBS when grounded that will engage regen or high braking- or bridging DS and X may engage regen (low)braking. It is hard to tell the difference with the motor on the bench as there is not enough momentum to see the difference between power cutoff, low braking and high braking.

@EVCustoms

Жыл бұрын

Correct.. video with EBS breaking will be on next video of Learning board, this video is only for High and Low brake...

@avvarutheja

6 ай бұрын

@@EVCustoms Does regenerative breaking is different from electronic breaking. From my hover scooter, I can see that when I press the break lever, I can feel huge breaking force coming from motor, I believe its electronic breaking. I am very sure my mechanical breaks not playing any roll here, as I have disconnected those mechanical friction breaks completely. As per the spec given by Hover, my scooter dont have regenerative breaking. So, I am curious to know does regenerative breaking and electronic breaking are two different things, for these controllers.

Does the high brake perhaps be hooked up if u use Regen, and the lo brake is used if Regen is not used? A yes or no would be a good answer for me. Or whatever relationship these two brake features have to due with Regen, if anything. Thank you, Paul.

@benalexander9907

10 ай бұрын

I think you nave to ground it out I think

Grazie

When i checked the voltage between Highbreak wire and 48V +ve wire it showing 51 voltage.. so can i connect it? Or is there any chance to short circuit?? Can you pleasee check and tell me?

how did you connect the wires of the hall because there the wires have 2 colors and I don't have this cube and I have to connect the wire with the wire and I don't want the engine to be damaged

Great explanation .. any chance you can share a link where to buy that electronic brake lever ? I've been trying to find one for a while now

@EVCustoms

Ай бұрын

www.ebay.com/itm/354167524722?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g-1Dsac1SZq&sssrc=4429486&ssuid=rwtyC3wqQWa&var=&widget_ver=artemis&media=COPY

Hey bro, sorry for commenting here, i got a new Ebike and i have a problem on it and i need your help, the display reads only up to 13km/h when locked speed while it actually goes 28km/h, and when i unlock the speed it reads 39km/h, i tried upluggin and plugging all cables again with no result

what does 1:1 function do ?

Bro can you help me with my controller I forgot which wire for what..

My controller does’t have an ignition wire, will that work?

my problem on my e scooter its make a very bad noise when i move to hight speed but when i drive it slowly its run smooth and nice the . can you help pls

Είσαι ο EV Αρχηγός μας !! Τέλειος για άλλη μια φορά ! :) P.S. Ολα οκ με την Bosch powerpack, την έκανα balance ! Μου ρθε και απο τον ξάδερφο τον Αλη ενα ΒΤ BMS τύπου ANT (JD) οπότε την επόμενη δεν θα κάθομαι από πάνω της κελί - κελί. 21S πήρα αλλά φαντάζομαι μπορώ να το δουλέψω και σε λιγότερα S, έτσι δεν είναι ?

@EVCustoms

Жыл бұрын

Geia sou Nicola... na'sai file mou! wraios.. tha sou protina na pareis sketo balancer 7-24S 1.5A balance.. dioti to ANT apo 19-24 p.x i diataksi ton kallodioseon prepei na allazei..

I just inherited a scooter and the brake wires are disconnected and hanging. Scooter works fine except no brakes. I have tried connecting the 3 cables all sorts of way. At one point the brake worked but the ride was very juddery. The thumb brake has three cables hanging red, black, yellow and there are 3 cables hanging from the handle bar red, black, green....Any help would be much appreciated. The scooter is a Schwinn eco

How to hook up hover board moter with rewire

Please can you explain what the single thin white wire with plug is for? Can be seen at 11:37 and is also present on Lisburn controllers

@DaMaestroNL

Жыл бұрын

I think its a smart learning wire. there is probably another one. and if you connect them you can make it turn youre wheel the other way. incase of my scooter the wheel turned backwards at first. but when i connected the two white wires for 5 secs. it teached it self to go forwards

Cool. Thanks. 👍 I believe the throttle is simply a potentiometer. What is the resistance value that is used for those?

@EVCustoms

Жыл бұрын

Hi.. no.. there is magnetic sensor an working with voltage output, so the controller read voltage from the throttle.

Who makes that break handle? Are all e-bike brakes a normally open switch? I want to use it for a project it I need it to be NO contact.

@EVCustoms

11 ай бұрын

Yes mechanical brake handles they are NO (normally open) contacts, magnetic brake sensors are NC (normally close) contacts