My husband and I just built this today and it came out amazing. Thank you so much for making this video!

@TrafishAquatics

3 жыл бұрын

Your welcome! Glad it was helpful

Just made this with a few modifications for my 25 gallon tank. took me quite a bit longer but very happy with the result, thank you!

Absolutely PERFECT instructions. I was able to have this up in 2.5 hours, and it was about 60 dollars total with lumber from Home depot (this included a sheet of 5/8 ply for a top and some other projects. So you can probably do this for 50 bucks.

🙌 I really appreciate you making this video I definitely just learned how to build a shelf from scratch YOURE THE MAN!!

Dude this helped me build it just like that and the most helpful parts were the way you not only explained it but showed us from start to finish. Good job brotha 👏 👍🏻 Thanks !!!

@TrafishAquatics

2 жыл бұрын

Thank you! Im glad it was helpful!

Thank you so much for this design, will be making one tomorrow for my 55G and couple other small tanks! thank you so much .

@TrafishAquatics

2 жыл бұрын

Your welcome

Best tank stand build ever 1 ! Thank you, x

EXACTLY the video I’ve been looking for, thank you!

@TrafishAquatics

2 жыл бұрын

Your welcome

Thanks man. I used your plans. Turned out great. Have a 55 gallon on the bottom. The top is slowly turning into a nano tank area.

Thank you!! First there's nothing over 28" tall you can buy from the stores that isn't over 300$ and made of particle board; this stand is perfect to see over the balcony to the front door so we can see the tank when we walk in the front door and obviously view it in the living area. #2 This trumps any stand even metals ones I seen online that were under 250$-300$ for safety, I am definitely building this over the weekend and will feel that my two year olds are safe around the tanks.

You made me look like a genius master aquarium builder! Thanks my friend! KK, USN/ Ret

@TrafishAquatics

3 жыл бұрын

Your welcome!

Helpful I have a 75 and 50 I wanna consolidate and this just gave me the idea I needed

I mocked up this design in Blender for adjusting to a smaller version and I couldn't be more excited to build it. I've really been wanting to set up my 20 long under my 10 gallon.

Nice build. I built a stand for my 125 using 2x6s and lag bolts to secure the stand to the wall (built into wall in basement). I also built a stand for when I decide to one day get the 150g tall tank. Now, I need to build a stackable stand for two 30 long tanks. Since I never built a stackable stand, this will help my build. Thanks.... Got a new subscriber.

@TrafishAquatics

2 жыл бұрын

Thank you and your welcome!

Can't wait to build this looks good

@TrafishAquatics

3 жыл бұрын

Thanks, it should work well for you.

Thanks for sharing your skills with us.

@TrafishAquatics

4 жыл бұрын

Your welcome!

I like your design. I'll probably be using it for a multi 10 gallon setup. I will likely cut a piece of plywood for the bottom to make a shelf, stain or paint the wood and put a backer behind the lower tanks with blue or black paint to serve as a backdrop for them. Thanks for putting the vid together and sharing.

Pretty ingenious design to carry the weight into the floor. Thanks for the plans :)

@TrafishAquatics

2 жыл бұрын

Your welcome

@curtispapineau9645

2 жыл бұрын

Just built another one of these to stack 40s. Also i modified my old one to hold a 75 on the bottom and a 55 above. (The 55 is a terrarium so weight is no issue) either way these stands are very sturdy and an excellent value even with todays lumber prices.

Thank you for the time you spend doing these videos. The DIY info is very helpful from resealing the tanks to building the stands. I like your design on the 55 stacked stand I've built one 55 on top and a 40 breeder on the lower shelf but I need now to build the identical stand that you just did in this video. Keep up the great videos

@TrafishAquatics

3 жыл бұрын

Thank you, I'm glad you find them helpful and informative!

I’ve decided to build this design since I’m limited in space in my house and can stack em. Although I wish it was still 30$ to build. I put a veneer of reclaimed pallet slats. Looks good all complete.

This will come in handy!

@TrafishAquatics

2 жыл бұрын

Your welcome

great video

We need more 💯 like this

@TrafishAquatics

2 жыл бұрын

Thank you

NICE WORK

I just picked up a 55 gallon tank and metal stand. I cleaned the tank and stand and painted the stand. Perfect! I set the tank on top of the metal stand and see that the lengthwise angle crosspieces on top are slightly bowed and there is a gap in the middle of about 3mm. I am reluctant to fill the tank and get it going only to have the center give out. I could reinforce it using 2x4's, but am wondering if you have ever hear of this problem? And great job on the stand!! I may just end up going that route!

Good job,thank you

@TrafishAquatics

2 жыл бұрын

Your welcome

great video and very detailed. Would you be able to share any photos of the two 55's stacked? It would be cool to see the fully finished product with the aquarium loaded up. Plus would help to see how the tanks will sit and how easy/hard it would be to be able to access the tanks for water changes etc.

Love this! Exactly what we are looking for! Thanks for sharing! It allows the centre of gravity to be lower like the way you have your set up with the larger tank on the lower shelf and smaller ones on the top. The bottom area could be closed in with doors to finish it a bit more and the whole thing painted the same colour as the wall so it blends in. I have two questions: 1. How easy is it to clean the top aquariums (for access height). I am 5'9". Top of the tanks would be 49" plus the height of the tallest top shelf tank. Any challenges accessing for set up, cleaning etc? Trying to avoid a step ladder. 2. Is 10 Inches enough space between the side supports to place a hang on back filter for a 55 gal? Otherwise the whole stand needs to be moved away from the wall at least 4 inches to allow for it to hang at the back if you don't want o put the filter on the front (which we don't). I guess I'll have to do some research on the dimensions of the filter we will be getting. Thanks!

@TrafishAquatics

4 жыл бұрын

I haven't had any issues cleaning the top tanks, and the ceilings I have aren't even full height. Personally I would just hang the filters off the back, for safety reasons I used 5-in steel L brackets to attach the stand to the wall and I'm able to run penguin 350s on the back of them with no issues

Building this today, You are so damn lucky one of your boards didnt go flying into one of your tanks.. i was cringing through the whole video, just waiting for one to go flying >.< :D anyway, looks like a good design, and I have stacks of scrap pallet and crate wood sitting around. Thanks for the share!

Nice stand. Thanks for the video. I would recommend star bits though. Much easier than Phillips. *I see you switched up at the end 👍 Merry Christmas 🎅

Thank you the stand I'll be making with ur videos help will be for my snakes tanks it wouldn't be as heavy cause it's not holding water. the tanks are different sizes so the slightly smaller one will be on top.

This is such a great design and easy to build - thanks for the vid. BTW, you should ask santa for an impact driver, brotha! Makes zipping in screws cake

@TrafishAquatics

2 жыл бұрын

Thanks, yea i may do that lol

Petsmart had a huge sale on their 55 gallon tank kits. I purchased 4 of them, so two of these shelves would be amazing and save me money. The dimensions off the box for each tank is 48Lx13Wx20H. I assume these would fit just fine on this build. For anyone asking...after doing the math you will need approximately (9) 2x4's that are 8 ft long for this project. You will have a little left over but not much. The few things that I would change is I would add some thinner boards to the top to help disburse more weight evenly and I would sand it all down (edges and writing). I would then most likely stain it. Either way, I would be saving a ton still.

@trideman7051

Жыл бұрын

Did this work for you? Thinking about building but i think the dimensions for the aqueon tanks need more length for the width

Great instructions... Gonna use this as a base for my design. I want to have a 55 gallon on the bottom, and raise the top to have a bar height counter/shelf. Thinking of using stained/carved reclaimed wood to attach to the top level and jutting out enough to give room for some footspace. Would love your thoughts, or even help if you have done a fishtank bar type build before!

@TrafishAquatics

3 жыл бұрын

If your going to do a bar stand with this I would add wider feet to the bottom to help stabilize the stand from front to back

Thanks :)

@TrafishAquatics

2 жыл бұрын

Your welcome

Love this tank design ! I was curious what the dimensions would need to be for two 20 gallon talls to mimic this set up ?

I know it’s a little time-consuming, but if you pre-drill all your screw holes with a 8th inch drillbit. The screws would go in like butter. They grab better and you wouldn’t split the wood.

Love this video! If I’m not planning on stacking tanks could I just build the lower portion for a single 55 gallon to sit on?

@TrafishAquatics

3 жыл бұрын

You could, personally I would reccomend this build instead as it's more stable for a single tank. kzread.info/dash/bejne/ZqqC0Jqzmc_JZJs.html

im gonna be making a smaller version of this for my 29g long tanks, do you have any tips? I did male them a little bit taller and wider to have a little more space.

@TrafishAquatics

4 жыл бұрын

Yep to make this as easy as possible make sure you use torx bit screws, they're a little more expensive but you have to put no effort into driving them in! Aside from that give yourself a little extra room on the sides of the tank to clean them if needed.

I have a 91cm tank, do i measure it exact until the 4 brace or until the inner brace only Thanks

If I wanted to pre drill for my build..what size bit will I need for #8 2 1/2" screws??

Great video. Can the lower compartment on the bottom be also used to hold smaller tanks? I am thinking of having a 29g and 15g on top, 55g in center and Spec V and maybe a couple of 10g or 5g on the bottom? Based on the weight you mentioned, it looks like I am well under it.

@TrafishAquatics

3 жыл бұрын

I imagine you can, You would just have to increase the overall height to open those lower gaps up so you have access to those tanks

Nice video. This is very helpful. Do you ever have a problem with clearance when you’re trying to do water changes or catch some fish from your bottom shelf?

@TrafishAquatics

2 жыл бұрын

Personally I haven't, As you can see I'm a fairly large guy and I don't have any issues. But you can increase the height of the upper shelf if you want some more room

any 40 gallon breeder double tank videos? im trying to do the math dimensions for the cuts on this design.....would 39.5 work? and 15 for the side

"2x4 are about $2.70 a piece". You can tell this is pre covid lol, cheapest 2x4 at my lumber store is $6 right now...

@TrafishAquatics

2 жыл бұрын

Yea it was lol, 2x4 by me are down to $3.50

@chrisgille6449

2 жыл бұрын

@@TrafishAquatics thats crazy. I just checked the price at my local lowes, still $5.98 for the cheap ones.

@TrafishAquatics

2 жыл бұрын

Wow that's crazy

We are going to build a "guppy tower"! 3 levels with double wide 10s or single 20L with full shelves on each level. What would you say the optimal distance between shelves would be?

@TrafishAquatics

3 жыл бұрын

It all depends on what tank size you use, personally what I would do is figure out exactly what tanks you want to use and then design your rack with that tank size in mind. Normally when I go to figure out the distance between shelves What I'm really looking for is the amount of space between the top of the aquarium and the bottom of the shelf above it, usually I try to keep mine 6 to 8 in and I feel like that works out pretty well as it gives me plenty of room to work in the tank as well as take things in and out of the tank. In the case of 10 gallons or 20 gallon longs being that they're about 12.5 in tall you would probably want a spacing of anywhere between 18.5 to 20 in from the top of a shelf to the bottom of the shelf above it.

Hi. Is there anyway you can help us with the dimensions for the Aqueon 40 Gallon Breeder Tank stand? I don't have the tools so I can't really do trial and error until I get it right, and I just don't have the skills. If you ever have the time, can you please do a short videos on the measurements so you can keep the credits? I would rather have this double stand over two separate stands. Thanks!

Thank you for this video; I am really considering making this since I jus purchased a 55 gal tank; but my wife thinks it won’t b sturdy enough; but my question is could you make a video of putting the tank in the stand; that part has me confused

@TrafishAquatics

Жыл бұрын

Tank just slides in from the front and rests on the shelf

One of the best rack build videos out there! How hard would it be to build a dual 75G stand? You mentioned to use 3X6 lumber. Why did you choose 55G over 75G?

@TrafishAquatics

4 жыл бұрын

Thank you! Doing a 75 stand would be no different except making the length of the crossmembers from front to back 15.5" instead of 10" making the depth from front to back 18.5" for the 75 instead of 13" for the 55. I chose 55s because I had gotten a bunch of free 55s otherwise 75s would have been my choice lol. And all the lumber used was 2x4.

@kitzj0

4 жыл бұрын

@@TrafishAquatics Thanks! Do you recommend 3X6 lumber is 2X4 ok?

@TrafishAquatics

4 жыл бұрын

2"x4" pine boards are more than enough, 1 vertical 2x4 can support 1000 lbs before failure, the bottom shelf on this stand has 6 verticle supports so can theoretically hold 6000lbs at the failure point, I consider half that a safe load rating. since the top and bottom tank are both supported by the bottom shelf you add tank weights together and as long as you don't go over 3000 I'd say your good. A 75 gal weighs about 750 fully set up with substrate and decor so 2 75s would be 1500lbs, so the stand is easily capable of holding that. If you wanted to go 3x6 you could but the dimentions would be a little different for building.

@eddiebcichlids4143

4 жыл бұрын

@@TrafishAquatics would this be okay to go 3 levels with 2 10s on top

Nice build can u use a impact to drive the screws

@TrafishAquatics

4 жыл бұрын

thank you, yep you can do that.

Would this design work for a 60 inch long build? Without center support

Nice! I'd consider doing this for something like a stand for three 40 breeders.

@TrafishAquatics

4 жыл бұрын

This style stand would work great for 40 breeders

@PhilMargolies

4 жыл бұрын

@@TrafishAquatics Sounds like fun. I just need to work out the dimensions and add another shelf.

@TrafishAquatics

4 жыл бұрын

Sounds like a fun project!

@PhilMargolies

4 жыл бұрын

@@TrafishAquatics Wondering how high I can go with a 10' ceiling. Maybe 4 or 5 tanks high. Anchoring it to the wall to avoid a catastrophe. Hahaha

@TrafishAquatics

4 жыл бұрын

I wouldnt go more than 3, a ladder is a PITA to move around to do maintinance

Thanks again for all your help! Do you use shims on the bottom of the rack to level, or shims on each shelf under the tank to level each tank?

@TrafishAquatics

4 жыл бұрын

You want to use shims under the entire stand, if you use shims under the tank itself it could cause stress on the silicone seams.

@kitzj0

4 жыл бұрын

@@TrafishAquatics that's what I thought. I was in a local fish store yesterday and the guy had the shims under his aquariums. Could be because he just moved to this location.

@TrafishAquatics

4 жыл бұрын

It is possible to use shims on a tank, you just have to make sure that the shims are all applying even pressure across the tank and that the load is being supported by the corners which is many times difficult to do. But it is a much better option to shim the entire stand. Because it reduces the risk of leaks due to stressed seals and seams. I'm actually going to be making a video on this topic in the future.

Amazing build guide. Mention the.plywood and paint that batch

Do you happen to have the exact measurements to replicate this with a 40G breeder rack, 36 inch long tank

What are the dimensions of the 55 gallon? Will is fit a 13x48x21 tank?

How many 2x4s of what size please and thank you

How many 2x4’s do I need to buy?

Are these screws good to use for this built star drive coated screws Deckmate is the brand

@TrafishAquatics

3 жыл бұрын

As long as they are #8 screws that are 2 1/2" long they'll work fine

Is it bad if one of the sides leans against the wall and one of the leans away from the wall? I just built my first stand and it’s like that.

@TrafishAquatics

3 жыл бұрын

Depends how much, one of my stands had a slight twist but it wasn't much (less than 3/8") and the shelves were still level so I used it, if the shelves aren't level you'll want to try to get the twist out to level the shelves or you'll risk damaging the silicone seams on the tank.

Hey do you think I can make the 11 inch pieces 7 inches and only putting one 55 on the bottom rack then making the 26 in piece 30in and putting a 55 in tv on the top rack. I’m limited to 84 in and the tv with the wood is place on the top rack would be a little less than 35 in giving me only enough room for the stand but I need a little more room between the top of the tank and the top rack

@TrafishAquatics

2 жыл бұрын

Yes that would be fine!

@ericdomotor2382

2 жыл бұрын

@@TrafishAquatics thanks and you got 9 2x4x8s? And are they pressure treated?

@TrafishAquatics

2 жыл бұрын

Yes, And don't use pressure treated

if you want a stand for just one 55 gallon tank could you stop the build at first shelf space? thanks! great video.

@Ahalbina

5 ай бұрын

This is exactly what I’m doing. I’m also raising the standard up a little.

This Is absolutely awesome!!!! I needed a cheap stand because I’m getting a 55 today and I already have a 20 gallon long and I needed a stand for both. Were these 8 foot 2x4s? And do think it would work to put 2x4s across the top to hold the 20 gallon or do I have to use plywood? I need the cheapest option.

@TrafishAquatics

2 жыл бұрын

Yes theyre 8 footers, you dont need plywood, you can just add a second cross brace on the top and locate them under the edges of the tank to give it full support

@BlessedWithPets

2 жыл бұрын

@@TrafishAquatics oh ok. Thank you so much! And how much do you think the total build cost is?

@TrafishAquatics

2 жыл бұрын

About 35-40 bucks depending on wood prices

@BlessedWithPets

2 жыл бұрын

@@TrafishAquatics thank you! I’m on my way to buy the supplies right now lol. Don’t worry I’m not driving lol I’m only 14 😅. But anyways, great video!! Thx again! God bless!

@TrafishAquatics

2 жыл бұрын

Your welcome, best of luck!

good evening. would you happen to have a video of the build to the left 😂😂. i’m more of a vision type of guy

I notice the stand with tanks on it has plywood between the 2x4 and tank, you don’t say this is required but my fear would be if you don’t do the plywood and have the stand exactly level/flat the tank would crack. Do you have any w/o plywood?

@TrafishAquatics

Жыл бұрын

Yes i have a few, the one with plywood was originally holding a 20 and 29 gallon so i added the plywood, however having the plywood would help create a flatter surface for peace of mind if you want

I would just suggest using a wood glue as well as the screws, it's a little additional cost but it is an additional piece of mind before screwing it all down that you've done everything to make sure the supports are secure. Might also want to go with a treated wood for termites, might also want to use a sealer so that even if it gets wet it repells the water.

@TrafishAquatics

2 жыл бұрын

You should never use treated wood indoors, also wood glue wouldn't work with treated wood as the wood needs to be dry for the glue to soak in and treated wood is wet. With the amount of load that the screws and wood can handle the glue is not needed.

@sparkyjones560

2 жыл бұрын

@@TrafishAquatics Ok.

@flicksby3930

Жыл бұрын

You do not use treated wood inside of the house. Just stain or paint it with an exterior paint for water "resistance". I sanded my down and stained them. They turned out perfect.

How many inches of arm space did you give yourself above the bottom tank with the 26.5 board Is there enough space to do water changes, get your hand at the bottom or put a HOB filter in there? Asking because I’m looking to put a shorter tank underneath and I don’t need the 26.5” opening Probably only need 21.5” because the tank is 5 inches shorter.

@TrafishAquatics

6 ай бұрын

Its about 6", plenty of room for water changes and i was able to fit a marineland 350 back there

I need one of these for a 20 gallon long. I’m not bob the builder so I’ll need help what would I need? TIA

@TrafishAquatics

2 жыл бұрын

Ok I can probably help so for a first question how many 20 longs would you want to to stack? Also 20 gallon tanks can be on a much simpler stand design because of the lighter weight if you want simplistic. Like this kzread.info/dash/bejne/fJZntdqwpKSfg7Q.html

What does the tank sit on inside the opening and top? I’m asking because of the large openings underneath. Do I need to lay another sheet of wood?

@TrafishAquatics

3 жыл бұрын

Nope you don't need to add plywood or anything, framed tanks only touch on the frame of the tank so the bottom isn't being supported by anything anyway.

@71blze

3 жыл бұрын

@@TrafishAquatics thank you, but the smaller tanks on top will need a sheet of plywood right?

@TrafishAquatics

3 жыл бұрын

Yes if you build the shelf larger than put smaller tanks on top a piece of plywood would definitely help support them

What sponge filter do u use in your tanks?

@TrafishAquatics

Жыл бұрын

Aquatop and aquaneat sponge filters

I been wanting to build one of these for awhile now. Is there anyway you could help me with the measurement's? I would like my bottom tank a little lower and also my top tank with just enough room to add my light's, filter and lids.

@TrafishAquatics

4 жыл бұрын

Sure thing, how low do you want the bottom tank to sit? And how much space do you want between the top of the bottom tank and the bottom of the shelf for the top tank?

@juanwilson2390

4 жыл бұрын

@@TrafishAquatics For the bottom thinking about instead of 11''' take it down to 8''' and the 48'' lower it to 46'' and also the 26''1/2 to 24''1/2. As I'm telling you I kind've figured out the measurement's lol. My problem I'm having with this project is with my measurements will I still have enough clearance to add my lighting lids and filters on the bottom tank?

@TrafishAquatics

4 жыл бұрын

@Aqua Man the current build in the video has a 6" space on top of the bottom tank to get into and work with lighting and filtration, with the changes you want to make you will have 7", not sure what lighting you run but even the factory t8 hoods fit under there with ease with only 6"

@juanwilson2390

4 жыл бұрын

@@TrafishAquatics decided to go with just the single stand just made some adjustments with the measurements and it came out perfect. No extra lip hanging off the sides all thanks to you check it out kzread.info/dash/bejne/iIyd1cWjqNfOqc4.html

Would bringing the height on the bottom tank closer to the ground, say from the 11" to 3-4", prevent it from being stable or no affect?

@mattsp91

4 жыл бұрын

Just want to reduce the height of the stand by 6-7", mainly by reducing the height of the bottom tank to be closer to the ground and try to keep at least 4-5" of space at the top of the bottom tank. If you could help with measurements that would be awesome, I seem to be an inch off.

@TrafishAquatics

4 жыл бұрын

If you were to bring the bottom tank down to 3 to 4 in from the floor it would essentially just be sitting on the bottom of the rack and it would eliminate a shelf. Essentially you would have one tank sitting on the floor and the other tank on the top shelf. This definitely wouldn't be as sturdy because there's no middle shelf preventing any sway as well as the middle vertical beam on the bottom shelf preventing swaying. It would essentially just be a square box.

@TrafishAquatics

4 жыл бұрын

if you have Facebook and you want to send me a message on messenger I could help draw a blueprints and stuff like that for you. Just search Travis Stevens, The profile picture on Facebook is the same as on KZread

@trafish aquatics; how would I build this for a 75 gallon with a 40 breeder sump?

@TrafishAquatics

2 жыл бұрын

Just increase the front to back supports from 10" to 15.5" to accomidate the extra depth, everything else would be the same

@chardavina

2 жыл бұрын

@@TrafishAquatics thank you!

@TrafishAquatics

2 жыл бұрын

Your welcome

Will this fit my 55 gallon Aqueon tank? The dimensions are Length 48.75 IN Height 21.25 IN Width 14 IN

@TrafishAquatics

2 жыл бұрын

Is it 48.75 or 48.25? If its .75 youll have to make the shelves longer

I built this and it looks great. I put old pallet board around it. What do you think about the weight of two 55 gallon tanks on one spot of the floor? Basement below.

Is there a way to make it lower yet more spaced between them? ❤

@TrafishAquatics

4 жыл бұрын

Sure you just have to make the vertical supports under the lower tank shorter so that tank sits lower and that'll add additional space between the tanks, currently there's 6 inches between the top of the bottom tank and the bottom of the bottom shelf So however much you shorten those lower vertical supports would be gained space in between the tanks

@Excusemyfrenchieaj

4 жыл бұрын

@@TrafishAquatics thank you! ❤❤❤

around how many screws would you say you will need?

@TrafishAquatics

4 жыл бұрын

About 104

What did u use to make the top solid?

@TrafishAquatics

Жыл бұрын

Top shelf load is transported through the uprights under the shelf to the floor, the outer uprights hold it in place

My stand I built seems sturdy enough and resting on hardwood floor. I’m going to put my 55 gallon on the bottom shelf and my 20 gallon tall on top shelf. Should that be fine without mounting brackets to the wall? That’ll be 800 plus pounds total.

@TrafishAquatics

3 жыл бұрын

With how narrow the stand is vs how tall it is I would still reccomend the mounting brackets

@yournotdatguypal

3 жыл бұрын

@@TrafishAquatics give me the name of the bracket names please? I just really wanted to avoid putting holes in the wall but fuck it ima do it

@yournotdatguypal

3 жыл бұрын

What size metal angle brackets are you using and what screws or bolts are you using to support the angle brackets on the top rear beam?

@TrafishAquatics

3 жыл бұрын

I'm using 5-in L brackets, You can get them at Walmart, Lowe's or home Depot or pretty much any hardware store, I'm just using regular number eight screws to attach it to the studs in the wall and to the stand

I would suggest to make the one boards 52 inches or 53 inches

@TrafishAquatics

4 жыл бұрын

You can definitely increase the size of the shelf to meet whatever design you desire, I chose 51.5 because I wanted a nice tight clean look. 51.5 leaves you about 3/8 of an inch wiggle room.

@eddiebcichlids4143

4 жыл бұрын

I had old 55 that didnt fit today

@TrafishAquatics

4 жыл бұрын

@@eddiebcichlids4143 must just be something with the older tank being a different dimension than the today's standard 55, I have three of the same stand built for my 55 gallons and they all fit

Hi I’m trynna build this but I would like it the bottom one a little higher. Can you guide me the measurements so I can ask Home Depot to cut it for me since I don’t have the tools to try cut it myself

@TrafishAquatics

4 жыл бұрын

How high would you like the lower tank to be off the ground?

@engelsramirez4886

4 жыл бұрын

Trafish Aquatics 6 foot tall. It’s for 2x 55s gallo aquarium tanks

@TrafishAquatics

4 жыл бұрын

@@engelsramirez4886 Wait so you want the bottom tank 6 ft high? As it is with this current build the top tank is about 6 ft tall. Maybe if you send me a message on Facebook we'll be able to figure it out a little easier, just search for Travis Stevens, The profile picture is the same as the KZread one

@engelsramirez4886

4 жыл бұрын

Trafish Aquatics alright

Is your tank 48” in Length and 13” in width? I can only find #8 2” screws in hex screws can’t find them 2 1/2 is that going to be ok?

@TrafishAquatics

3 жыл бұрын

My tank is 48 in in length and 12.5 and width I added an extra half inch because of the radius on the edge of the 2x4 That way the tank was sitting on a flat surface, a 2-in screw is only going to go into the second board approximately half an inch so you're definitely going to want a two and a half inch screw for the best strength, You might even be able to use 3-in screws but I don't know if the tips of the screws are going to poke out of the second board

@yournotdatguypal

3 жыл бұрын

Thanks bud and I think 3 will be fine because I cannot find 2 1/2 anywhere

@TrafishAquatics

3 жыл бұрын

Sounds good

@yournotdatguypal

3 жыл бұрын

@@TrafishAquatics is the middle 10” piece at the bottom base sitting flush or is that just support for the center

@TrafishAquatics

3 жыл бұрын

I have it sitting flush

I know this video is old, but can you give a list of measurements so I can convert to metric system?

I really like this design! I was wondering though I have a 125 gallon tank and a 38 gallon and 2 10 gallons I would like to build a stand that supports them all! Would I just use 2x6 for the bottom and 2x4 for the top or should I go with 2x6 for the whole thing?

@TrafishAquatics

3 жыл бұрын

I built a stand similar to what your looking for, I have a video showing the build here, this may work for what your looking to do kzread.info/dash/bejne/eXqAq6aGkZTUp9Y.html

@zacherymacdonald142

3 жыл бұрын

@@TrafishAquatics oh that’s awesome thank you so much! And keep up the great work you’re doing great

@TrafishAquatics

3 жыл бұрын

Thank you, will do!

what length 2x4 did you get

@TrafishAquatics

3 жыл бұрын

These are 8-ft 2x4s

think one could do a double stack for a 75?

@TrafishAquatics

3 жыл бұрын

Absolutely, You could do it the exact same way as this build but just increase the 10" pieces to 15.5" to accommodate the extra depth

Would this build work with a 40g breeder at the bottom and a 20 high on top? It would almost look like the setup in the back that has three aquariums. And would the 20g have to be on one side? I don’t know if it being right in the middle would be safe?

@TrafishAquatics

3 жыл бұрын

Yeah that would work fine You would just have to modify it so that the bottom shelf would be able to fit the 18-in depth of the 40 breeder and then the top shelf would have to fit the 12-in 20 gal, I have another video where I overhauled one of my stands to fit a 75 long on top and 150 gallon on the bottom, You would kind of have to design yours like that to be able to fit the two different tank sizes

@adalberto.valdez

3 жыл бұрын

@@TrafishAquatics thanks! I’ll have to look for that video then, thank you for making these videos simple and the plans easy to follow!

@TrafishAquatics

3 жыл бұрын

Your welcome, I'll find the vid and link it here in a sec

@TrafishAquatics

3 жыл бұрын

kzread.info/dash/bejne/eXqAq6aGkZTUp9Y.html

@adalberto.valdez

3 жыл бұрын

@@TrafishAquatics I appreciate that, I found some more of your videos and added them to my list to watch later. Your channel was a hidden gem haha

What should I do if my bottom shelf is level but my top one is not?

@TrafishAquatics

3 жыл бұрын

Figure out which way it's not level and cut a little off the respective inner support for that corner or corners to level it

@TrafishAquatics

3 жыл бұрын

Figure out which way it's not level and cut a little off the respective inner support for that corner or corners to level it

I followed this but I made it ware I could put a 75 on bottom but right now I have a 55 on bottom and a 29 gallon on top hoping to get a 75 then I'll put the 75 on bottom then 55 on top

Thank you for your nice video. But I wonder why you are explaining 13 boards of 10 inches. In the video, there 15 boards of 10 inches. 5 boards in each layer. Or am I missing something?

Does the wood material matter or I can use any wood?

@TrafishAquatics

2 жыл бұрын

Any wood will work, softer woods like pine (what i used) are more flexible but not as strong as other woods, hard woods like maple, oak and cherry are stronger and more rigid and look better but arent as flexible and can crack much easier

So would the weight of the water be ok on the glass since the space is open under the aquarium?

@TrafishAquatics

2 жыл бұрын

Yes even on an enclosed stand the glass doesnt touch anything because of the frame

@Hunter15d

2 жыл бұрын

@@TrafishAquatics Oh ok, wasnt too sure. Thank you for replying. Also is that an aqueon 55 tank? I want to build this for mine but I know nothing of building or measurements

@TrafishAquatics

2 жыл бұрын

Yes, one is aqueon the other is marineland, a majority of other name brand tanks are the same size also

4:45 ... and this is why you pre drill holes folks! Crrrrrkrrrk!

@TrafishAquatics

4 жыл бұрын

Yep, you can totally pre-drill the holes as long as you drill the right size, if you go slightly too large the stand isn't going to be as sturdy because you no longer have full contact with the entire shank of the screw. This is why I chose not to pre-drill, also I think most of the noise you're hearing is the bit jumping on the screw head, due to cheap screws and cheap bits

@3volk715

3 жыл бұрын

2x4's are soft, they don't need predrilled. At the most all you gotta do is run the screw back out and in a couple times as you are tightening it down for the first time.

@TrafishAquatics

3 жыл бұрын

Pretty much

@haydenbrooks6272

3 жыл бұрын

@@3volk715 you are mentioning the dimensions and density of the wood which is completely irrelevant to me commenting on this dude not pre drilling holes and me hearing the splitting of the wood. “Better to remain silent and be thought a fool than to speak and to remove all doubt” -Abraham Lincoln And to @trafish, I would argue that splitting your wood is far more detrimental to the integrity of your structure than the possible oversizing of the drill bit? Why not just choose the correct size bit and show the internet how to do things the right way rather than perpetuating bad habits and laziness?

@TrafishAquatics

3 жыл бұрын

Simply because I chose not to predrill 🤷‍♂️, if you would rather predrill that's your call

What did you use for the bottom inserts? Plywood?

@TrafishAquatics

3 жыл бұрын

Nothing, these tanks are resting solely on the 2x4s

@blakecoffer2637

3 жыл бұрын

@@TrafishAquatics okay! Could I put plywood down as well? Or would it mess up?

@TrafishAquatics

3 жыл бұрын

Absoloutley, just make sure the plywood lays down level so it doesn't cause any pressure points

@blakecoffer2637

3 жыл бұрын

@@TrafishAquatics okay awesome

What is the total length of the stand? I will need two of these side by side. Just trying to make sure I have enough room. Thanks!

@TrafishAquatics

4 жыл бұрын

this stand should be approximately 54 and 1/2 in long but could vary up to about a quarter of an inch depending on actual board thicknesses

@hitsndc

4 жыл бұрын

Trafish Aquatics awesome thanks sooooo much! Last thing what is the height of the stand 48 inches?

@TrafishAquatics

4 жыл бұрын

Yes 48 overall height

@hitsndc

4 жыл бұрын

@@TrafishAquatics hey!! I'm heading to the store now to grab the wood. I have a question. What measurements could I use to make a dual 75 gallon stand like this. Or how many pieces of wood would I need?

@TrafishAquatics

4 жыл бұрын

For a dual 75 the only dimension that would have to change is the boards that run front to back, on a 55 the boards are 10" but for a 75 they would be 15.5". I would grab 11-12 boards to be safe incase of any miscuts.

I know this video is older but I just came across it. I was sitting there thinking to myself... Why are you not using torx heads instead. Then you suggested it like 30 seconds later lol.

@TrafishAquatics

2 жыл бұрын

It was all part of the budget build lol, torx head screws cost more and I prefer them hands down

@sols.2525

2 жыл бұрын

@@TrafishAquatics totally understand budget.

Man what size angle brackets should I be using man?

@TrafishAquatics

3 жыл бұрын

You'll need at least a 5" L bracket

@yournotdatguypal

3 жыл бұрын

@@TrafishAquatics thanks bud

@TrafishAquatics

3 жыл бұрын

You got it

@yournotdatguypal

3 жыл бұрын

@@TrafishAquatics last question I promise. What sized bolts in length should I use? I can determine the size of circumference

@TrafishAquatics

3 жыл бұрын

I just use number eight two and a half inch screws and used a stud finder to find the studs in the wall and shot the screws in that way to make it as strong as possible, If you want to use a heavier grade screw you can use cabinet screws.

This is exactly what I have been looking at doing almost. Only difference would be slightly higher on the bottom so I could throw a couple 10 gallons and plan for potentially two 75's on top. Only math thats not working for me - the 10" boards you made 13 of them... but there are 5 per shelf, and there are 3 shelves... so shouldn't there be 15?

@TrafishAquatics

3 жыл бұрын

On the shelf that contacts the floor there's only three, one on each end and one in the middle. You could add the extra ones if you want to but I didn't feel it was necessary because the only reason for adding the extra two boards is so the tank has a resting surface along those edges, there isn't a tank resting on the floor so those extra boards aren't needed.

@ChrisClos

3 жыл бұрын

@@TrafishAquatics ahh. Ok that makes sense now. I didn't see they weren't there in the video. Based on my change I'll probably put them there and cover with plywood as I will be putting 10 gallon tanks there. Thanks so much for the video, I've gone through so many and yours is the one that made it click and almost identical to what I want. Glad I found your channel.

@TrafishAquatics

3 жыл бұрын

Your welcome!

@ChrisClos

3 жыл бұрын

@@TrafishAquatics Wanted to let you know I have made my rack and testing it with my 75! Not sure how to contact you best, but would love to share pics. I'm telling you, your video was the key for my success!

@TrafishAquatics

3 жыл бұрын

Facebook messenger, name is Travis Stevens, same profile picture

Isn’t it 15 each of the 10” pieces?

I like the general design. I do not like your shelf is supported on 1 1/2 inches of wood on each end. I think. My design I will rotate the 2x4 so I have 3 1/2 inches of support. I am surprised you did not have a center support for 2x4. A special call out to all who read comments, design your project so the wood supports the weight and not the screws!

@TrafishAquatics

2 жыл бұрын

The way the tanks are supported all of the load is tranfered to the ends of the 2x4, which in turn transfers all the load onto the verticle 2x4, no matter how you turn the board it takes the load the same, the screws hold the framework together but the load is all on the boards, these stands are as solid as it gets

@fk319fk

2 жыл бұрын

@@TrafishAquatics I know, but I think I will modify your design just a bit. I will use 2x6 under the fish tank and rest it fully on a 2x4. Over kill yes, needed no, but aesthetically, I think I would prefer it. Now I have to think about what I will put above the tank, and below the tank. Thank you for the video you did, with out it, I would have spent twice as much.