🪴 *Are you looking for live plants for your aquarium? We've got you covered, click this link to order Tropica Plants NOW:* bit.ly/40cb4gY

@thefriendlyallay

Жыл бұрын

how did you comment that 9 hours ago if the video is 11 minutes ago? yt go brrr

@loganryan1317

Жыл бұрын

@@thefriendlyallay uploaded and probably had the premier set for a later time. Probably do that because they get busy.

@thefriendlyallay

Жыл бұрын

@@loganryan1317 it didn't say premiere tho? if it's a premiere it says that

@cmammen

Жыл бұрын

Can we get a cut list on the 75G? Please :) How can I get it

You are proving the theory that no matter how much room you have you still don't have enough room!!! :) Awesome!

Yes!!!! Can’t wait to get this built for my new diy fish room!!

You know, building/DIY projects such as this for any fishroom is some of the most enjoyable content on youtube. Thank you for sharing, looking forward to the next ones.

Next time, on 'This Old Fish House'. Cool series idea, guys. It's neat to see how everyone goes about making the most out of their space. Thanks!

When i built my stand for my 55, I used 4x4 corner posts and put my 2x6 on the outside with a piece of plywood covering the top. With doing that, the 4x4 are inside the footprint of the tank supporting the weight. No need for the extra support pieces. At the time being 17, that's how i cut cost of materials but kept it plenty strong. Im 37 now and its as strong now as it was new.

From someone who works in construction and builds decks etc, I wouldn’t rely on brads and just the screws. Wouldn’t hurt to spend like $30 more and install some engineered steel brackets and timber loks or through lags. Would definitely add to the beefiness and would add another level of peace of mind that it won’t ever fail.

Wow!! Great job John. Can't wait to see the next videos, especially Lisa's new tank😍😍😍

I haven't seen if anyone already asked the question about the specs for this build out. I am looking to do the same for 2 55 gallon tanks. Love your videos John & Lisa as they are very informational and I learn a lot each week.

I see a lot of these videos and I am about to start my own ... people you need to use the 2x4 or 2x6's under the tops to the floor do not let screws hold the weight! They look nice! well done :P

Spring is here , winter is over. Time to climb out of hibernation & work on some projects 😅 Always liked the double decker stands & these look very strong/well built. Why not run the filtration with Fluval , best cannister filter in my opinion 😎

Wowzers! now that's a freaking diy plan! Go gettum tiger! Can't wait to see the final setup!

Appreciate your videos, thank you.

I built some of your stand designs and they are solid.I used a slab top as my tanks are acrylic. I appreciate you showing us how to make them so much. Thank you. T

👍😎 Looks good and sturdy. Like that your making them match, will really look better when done.

I've built several stands over the passed 55 years. The only difference is that I glued all my joint & flat surfaces along with screws & the odd dowel spots. I also liked when Kreg came out with there pocket hole system, I wound up getting the complete system, I couldn't help not buying it all. John

Looking good

How Awesome

Looks great and love the Barn/Warehouse... Looking forward to the series... Just love your channel... 👏 👏 😊

Looking good so far! True, the weight distribution is important with this type of stand. Even with quality connecting material legs should go below the tank. Originally I wanted to do something similar, 40gallon secondary below 190gallon main. But instead of wood I decided to go with steel (with wooden cover)... which wasn't without issues. The locksmith (who welded it) recommended 30x30 mm steel beams of 3mm thickness (2 mm is more common, 1 inch is 25.4 mm) and that even with taking out central beam out of all 10 standing beams (legs) should be more than enough, one of the LFS owners convinced me otherwise... even if just for the rest of my mind. They had one stand (of different design) twist. My flat has cheap floating floor on it (on top of concrete) and floating floors tend to deform easily. Steel is also less rigid than wood of the same strength.

Awesome video bro 👊🏽👍👏🏻👏🏻

At least John is honest

Good job John. I always love the DIY projects

I built a stand for my 55 gallon with room to replace, little did i know id get a Good Free 50 Gallon that fits Perfectly at the bottom part of my stand!

Great build! Thanks

I made my stands much the same way, though my biggest aquarium is only 75g. They are more like benches than stands. I have a little bit of room around the edges to set things down when doing maintenance.

Not bad. They'll definitely do the job

awesome! i definitely could use all the ideas for a double 125.

Great skills and stand! I'm going to copy your design so that I can use it for my 125g and sump set up.

Joey king of DYI has some great info on these. Cool

Yup love having a two aquarium stand

Hello John, looks good, good idea for more space. I know you can't have vertical centered support, but could you atleast put one in the back. I just feel little more at ease with something supporting the middle, specially on a 6 foot tank. Love your show, good job you two.

Looks great, John💕👍

Hi John I hope you can to see this comment I’m going to start on my diy stand for my 125 6 foot tank But I don’t no the dimensions of the cuts for all of the supports and uprights I was wondering would you have the dimensions for the one you built but I am just going to have one stand for my tank ?

Question I see most everyone uses deck screws for joining the wood . Have you ever considered using pockets joints and if so would this be stronger or weaker, thanks for all the great information you guys out out .

New tank defo gonna be a huge betta sorority like MD's :D Hope I'm right! Would look amazing!

Team kgtropicals what an awesome video they just keep getting better and better love all the content keep them coming The old fish house is looking great should show a little more of that saltwater tank how's gizmo doing my buddy anyways guys see you on the next keep up the great work

good topic

Can we get a cut list on the 75G? Please :) pretty please i'll buy something from your website I was about to anyways...

@RyanStRichards

6 ай бұрын

Did you ever get a cut list? I want to do a double decker 75s also.

Very nice sir

Love it! I have a stand with a shallow 40 on the bottom, a 3ft 35gal in the middle, and a 75gal on top! Pretty similar! I would really appreciate it if you could maybe put (part 1, 2, 3 in the titles). I feel it helps so much when I want to look back at see other series you do

hell yeah! I love build videos!

This is the video I needed ❤😊

You could park your truck on that one and it wouldn't budge. Very nice!

Obviously this guy is a construction worker, not a carpenters.

TBH fish are really cool, there are so many of them and each and every one of them is unique in some way, it's amazing that we can make a stand and aquarium to keep them in our homes, such beutifull creatures 😁

@thefriendlyallay

Жыл бұрын

thanks KJTropicals

I only make aquarium stands out of marine grade birch plywood.

You've built stands, but how would you go about reinforcing a floor/subfloor to withstand the weight of a larger tank? I have a 180 gallon glass tank that Im set up in my basement. I wanted to have it on the first floor but I'm not sure the floor can hold it. I can access the floor thru the drop ceiling in my finished basement.

Is there a link to the finished cabinet? I keep checking back but can’t find that video. Id love to see how this turned out after the trim was put on.🐟🐠🐡

This project doesn’t sound like it’s only “one stone”.

Nice

Just in time video here, KGTropicals! I'm planning a 75G stack too.

👍🏻👍🏻

When working with dimensional lumber, how do you deal with the general unevenness of it? For example, I never see anyone running their horizontal supports through a jointer, or do anything to address that. The last few stands I've built when I set the tank on there, I can see many high and low points where the rim of the tank isn't making consistent contact with the wood. Is that something to just not worry about?

❤ are you going try the new fx bio media with the new filters? I'm a big fan of them, not a bad price for what you get

If I scaled this set up to hold a 4ft 180gl tank on top would I be safe with 2x6 with no middle brace? Then if I need something on the bottom to tie it together to make it not wobble I have a 75gl I would put down there on the 2x4 at ground level. Am I safe to make it like 5ft so there is room for the 75gl but that puts the 180 in the middle part not directly down on the corners.

You have Tankizes lol

What do you think about TM aquatics build?

I need a point by point schematic blueprint of your stands so I can build mine. 😁

@KGTropicals John did you use 2x and 1x for upright braces supporting the horizontal shelves? It looks like you have two supporter per leg?

Hello Join Love your channel. One question. What was the height of the stand?

Looking to make a 125 stand any help on the cut lengths?

Just built my first aquarium stand. 100 gallons and I guess I now know I way way over built lol

Can I siphon the floor one easily? Does it take forever?

What are the dimensions of the cuts ya did to make the 125g?

Another great video! I just love the cat bombing... it's impossible to get cats to go away when a camera comes out!

Would you still use 2 x 6 timber for 180's or would you step it up another size?

Is there enough room for something in the middle of the room? My fish store has a huge round tank in the middle of one of the rooms it has a small 🦈 shark at one time. That thing swam around and around it was cool. Just wondering.

Love this!

John you don't ship to the UK do you

Hey! I heard you guys are in NC now! That’s awesome. I am a RAS member. Was wondering if you’d be interested in building one of these for me?! What’s the best way to contact you? Thanks!

I have a few items in my cart from your shop for a betta tank… how can I contact you to see that I have everything I need?? Thank you!! 🤩

What's the guys name at fluval I need to talk about doing a review 😅

Why didn't you include lengths and dimensions???

Hello fellow fish friends😊

@thefriendlyallay

Жыл бұрын

hello

Another Tank lol

Good to go

Can't wait to see it all up and running nice 1 john

first

@thefriendlyallay

Жыл бұрын

i bet 10 cups of coffee that that is a lie in terms of views

Do u have any aquariums for sell

Live bettas!🤣 I would hope they’re alive!🤣

Is there a link to the finished cabinet? I keep checking back but can’t find that video. Id love to see how this turned out after the trim was put on.🐟🐠🐡

At least John is honest