A quick overview on how I accomplish a closed transfer with an Ss Brewtech Brew Bucket.
Жүктеу.....
Пікірлер: 15
@nah31863 жыл бұрын
Thanks for sharing we’re about to start the closed transfer loop method and have the same fermenters. This video really helped us out 🍻
@robbiesanders19683 жыл бұрын
how did you have a tri-clamp size opening in your lid? I looked on SS and theirs looks much different and is borderline overkill. I'm dying a slow death from oxygenation and need this technology :)
@chrismousseau555
3 жыл бұрын
I manually add it. I would recommend you don't place it in the center... The inset causes a triclamp to not be able to twist. I have to replace the thumb screw with a standard nut.
@steverussell9806
2 жыл бұрын
I purchased the older 7 gallon Chronical dome lid with the 1.5 TC flange so you can easily connect to that with a clamp, gasket and the same connector/pressure release valve used here. It was about $60 for everything!
@gib8594 жыл бұрын
What components did you buy in addition to the brewbucket? I want to do this! Thanks for showing me.
@chrismousseau555
4 жыл бұрын
Hi! I purchased the following from Ss Brewtech: 1. weldless 1-1/2 inch tri clamp bulkhead. 2. Tri clamp pressure relief valve I then bought a carbonation post that is used to carb soda bottles. I used some had line to connect this to the pleasure relief valve. I then attached a ball lock fitting to to some beer line to fill the keg.
@gib859
4 жыл бұрын
Chris Mousseau Thank you so much. I appreciate it. I’ll subscribe to your channel. Much success
@davidbeiler6364
4 жыл бұрын
@@chrismousseau555 whats the quick disconnect thing you got there? can you link it? looks awesome and would make my life ten times easier
@@chrismousseau555 yep! found one already just like it! Made my lift ten times easier bro
@curtpick6283 жыл бұрын
Why not simply use the existing airlock grommet with a cheap racking cane? Your only using 3 psi....
@chrismousseau555
3 жыл бұрын
My regulator doesn't do a great job at holding 3 psi. This prv helps ensure I don't over pressurize the vessel.
@TigerDave3 жыл бұрын
Nice work Chris. Does the trub or other hop gunk clog the keg poppet? I have a brew bucket and do something similar. I also tackle the "cold crash sucking in oxygen" issue. See my video starting here: kzread.info/dash/bejne/e5xlkrGLcbzFodo.html
Пікірлер: 15
Thanks for sharing we’re about to start the closed transfer loop method and have the same fermenters. This video really helped us out 🍻
how did you have a tri-clamp size opening in your lid? I looked on SS and theirs looks much different and is borderline overkill. I'm dying a slow death from oxygenation and need this technology :)
@chrismousseau555
3 жыл бұрын
I manually add it. I would recommend you don't place it in the center... The inset causes a triclamp to not be able to twist. I have to replace the thumb screw with a standard nut.
@steverussell9806
2 жыл бұрын
I purchased the older 7 gallon Chronical dome lid with the 1.5 TC flange so you can easily connect to that with a clamp, gasket and the same connector/pressure release valve used here. It was about $60 for everything!
What components did you buy in addition to the brewbucket? I want to do this! Thanks for showing me.
@chrismousseau555
4 жыл бұрын
Hi! I purchased the following from Ss Brewtech: 1. weldless 1-1/2 inch tri clamp bulkhead. 2. Tri clamp pressure relief valve I then bought a carbonation post that is used to carb soda bottles. I used some had line to connect this to the pleasure relief valve. I then attached a ball lock fitting to to some beer line to fill the keg.
@gib859
4 жыл бұрын
Chris Mousseau Thank you so much. I appreciate it. I’ll subscribe to your channel. Much success
@davidbeiler6364
4 жыл бұрын
@@chrismousseau555 whats the quick disconnect thing you got there? can you link it? looks awesome and would make my life ten times easier
@chrismousseau555
4 жыл бұрын
@@davidbeiler6364 www.amazon.com/dp/B07D2W1D34/ref=cm_sw_r_cp_apa_i_FEimFbG8REQBQ
@davidbeiler6364
4 жыл бұрын
@@chrismousseau555 yep! found one already just like it! Made my lift ten times easier bro
Why not simply use the existing airlock grommet with a cheap racking cane? Your only using 3 psi....
@chrismousseau555
3 жыл бұрын
My regulator doesn't do a great job at holding 3 psi. This prv helps ensure I don't over pressurize the vessel.
Nice work Chris. Does the trub or other hop gunk clog the keg poppet? I have a brew bucket and do something similar. I also tackle the "cold crash sucking in oxygen" issue. See my video starting here: kzread.info/dash/bejne/e5xlkrGLcbzFodo.html