Spintech Pro Street 6000 Exhaust Clips (5.3 w/ BTR NSR cam) OBS
Автокөліктер мен көлік құралдары
Enjoy some footage of my exhaust setup on the OBS chevy. True Dual 2.5" exhaust with x-pipe, dual Spintech Pro Street 6000 mufflers, no cats, Brian Tooley NSR cam, and Schoenfeld headers on an otherwise stock 5.3 LM7.
Пікірлер: 63
That Acura Legend though. My friend had one back in the day. Used to pick me up to ditch school. RIP Nick.
Nice man, I think you convinced me to go with this cam
@CoolCarsKJ
4 жыл бұрын
Can't go wrong bro!
Might have to put some of those on my big block obs. Sounds good! I have borla pro xs with 3” true duals but it ain’t got that raspiness like these.
Those rims you have are fucking KILLER!!! Best looking rims I've ever seen on a pickup!!!
thing sounds good
@CoolCarsKJ
4 жыл бұрын
Thank you! I'm pretty happy wit it. Spintech has a nice sound. Most are using black window lately.
@WastedTalentFabrications
4 жыл бұрын
@@CoolCarsKJ no problem i need to up grade my exhaust on my Z one day i might go that way. if you get a chance check out some of our videos and let us know what you think.
Was this the stage 1, 2, or 4 BTR NSR cam? I was planning on going with the truck Norris cam but this one sounds amazing
Love the sound!! I have the same motor and cam going into a 65 C10 and I am wondering if the Spintech's are super loud? it is hard to tell from a video, but love the sound . How is the cab noise?
@CoolCarsKJ
4 жыл бұрын
The pro street 6000 are perfect, sir. Sounds lovely inside. Dont got with the 9000s tho, it will sound like a race car!
Si quema cuh
Sounds nasty!
@CoolCarsKJ
4 жыл бұрын
Thanks Nate!!!!!
What’s your idle at? I have the same cam in my 5.3 and that chop/idle is perfect. I’m at around 875-900 rpm
@CoolCarsKJ
3 жыл бұрын
If I recall, he set idle at between 900-1000
Is the spintech center center, offset offset, or center offset
Are you using the stock GM 5 speed? If so, did it bolt up to your 5.3 just fine?
@CoolCarsKJ
4 жыл бұрын
Yessir. I have another video on my channel showing which parts are needed.
@alb_gone2611
4 жыл бұрын
@@CoolCarsKJ I'm not seeing the other video of which parts are needed.
@CoolCarsKJ
4 жыл бұрын
@@alb_gone2611 kzread.info/dash/bejne/Z6Nsuq2CicTOfbQ.html 2:55 mark
Thinking about running these mufflers,I have a 6.0 with ss2 cam,longtubes,and planning on a xpipe. Would you say it’s loud ? Any drone while cruising ?
@CoolCarsKJ
Жыл бұрын
Its loud but its hearty. Soinds great. No drone
Did you use stock lifters too?
@CoolCarsKJ
3 жыл бұрын
Yes, on this truck.
In that engine is it a stage 4 or stage 2 btr nsr cam?
@CoolCarsKJ
3 жыл бұрын
Stage 2 if I recall. Got it off their website
What drop do you have on this obs bro??
@CoolCarsKJ
2 жыл бұрын
We think its similar to a 3/5 but its not lowered the right way, it was done by previous owner.
I have the same motor n cam lol I wonder how I can get mine to chop like tht!
@CoolCarsKJ
4 жыл бұрын
Brian Tooley NSR (no springs required) Cam
@Chasemanuti
3 жыл бұрын
@@CoolCarsKJ which one though stage what?
What stage is that nsr cam
@CoolCarsKJ
3 жыл бұрын
stage 4
Are you running any stall or stock
@CoolCarsKJ
Жыл бұрын
No stall because it's a manual
Did you have to upgrade the springs
@CoolCarsKJ
3 жыл бұрын
Not with this particular cam, no. The NSR stands for no springs required.
@karnellhall7082
3 жыл бұрын
@@CoolCarsKJ word I was reading about a lot people said I would need a stall for that cam
@CoolCarsKJ
3 жыл бұрын
Yes for an automatic, I read the same. But mine is a manual so I didn't need one, of course.
@karnellhall7082
3 жыл бұрын
Yea what year is your truck mine is a 89 and this is my first ls swap
What trans are you running??
@CoolCarsKJ
4 жыл бұрын
nv3500, stock 5 speed
@jacobharrison8052
4 жыл бұрын
Does it work pretty good behind that motor or are you looking to upgrade trans soon?
@CoolCarsKJ
4 жыл бұрын
@@jacobharrison8052 the nv3500 is holding up good. If that's what's in your truck, it will work fine for a daily driver. But not for a race truck. I'd say use it until it blows. Me and my buddy are both using nv3500 with 5.3s
Stock heads?
@CoolCarsKJ
2 жыл бұрын
Yes
What headers are u running?
@CoolCarsKJ
2 жыл бұрын
Schoenfeld 1302LS1
@dylanmedd3224
2 жыл бұрын
@@CoolCarsKJ thxs and they fit good?
@CoolCarsKJ
2 жыл бұрын
Fit perfect. It's the main setup everyone uses. I have used them 4 times now
You in athens?
@CoolCarsKJ
4 жыл бұрын
Yezzir, Go Dawgs...
Stainless?
@CoolCarsKJ
Жыл бұрын
yes
When are you going to pain that bed
@CoolCarsKJ
3 жыл бұрын
Gonna paint the whole thing at some point
@mib_patdawg
3 жыл бұрын
What’s the update on the blue obs that y’all put a fuel pump in
@CoolCarsKJ
3 жыл бұрын
@@mib_patdawg Engine is in. Fuel lines are ran. Basically gotta run exhaust and install the wiring harness.
Marching band sounds ridiculous
Sounds like a old wore out tractor
@CoolCarsKJ
2 жыл бұрын
Kubota or John Deere? That will let me.know should I be offended or not... 😉
@trevordepotty7982
2 жыл бұрын
Nothing runs like a Deere!