Bro you have no idea how grateful I am thank you so much, from the white sheet from swimming trunks to the black lenses from the folder.

@perfect112customs

2 жыл бұрын

No problem!

These goggle are the best looking ones I've seen

@perfect112customs

7 жыл бұрын

Jackson Putnam Wow, thanks! I did my best

Holy crap i never saw this video and i did exactly what you did word for word including getting a black binder from walmart lmao it looks great man!

@perfect112customs

7 жыл бұрын

halomasterr117 No way! That's crazy. Did you get clear plastic from a remote control helicopter box, too? Haha

@halomasterr117

7 жыл бұрын

The Action Figure Geek haha unfortunately not, but I used clear plastic from an old toy box I had! love your design Man! Next I'll probably try and modify my goggles to actually squint and move!

@perfect112customs

7 жыл бұрын

halomasterr117 That would be amazing!

@DriftMaster-wm6ws

6 жыл бұрын

The Action Figure Geek what is the order

@perfect112customs

6 жыл бұрын

Matthew Codiga Black crescent, main black plastic, clear plastic, white mesh, glass

JUST FINISHED MINE... very happy with how they turned out

This is the coolest!! You're so creative!

@perfect112customs

6 жыл бұрын

Fynn Spider Wow, thanks!!

How well an you see through the goggles through the mesh. Can you see in low light areas

@datgamerian

4 жыл бұрын

You can actually see a little better when there's less light, but if it's too dark you won't be able to see very well. (I'm saying this because my mesh is hard to see through, but with any normal mesh this shouldn't be a problem)

Thank you for the swimming trunks idea. I think i might try it for full spiderman eyes.

Your videos are the best I subbed, your so good at making props.

@perfect112customs

2 жыл бұрын

Thank you!

Wow! Awesome dude! All I did was get some black swimming goggles, cut out some pieces of paper (and shaped them like the lenses) and sticked them on with glue tack, It's not the best but it's what I could do. Awesome DIY like I said before, I subbed.

@perfect112customs

7 жыл бұрын

Dylnamations Thanks, man!

Thank you so much, this worked for me so good I now have a full costume and I will probably be making a video on it soon!!!!

Nice I like the Goggles

@perfect112customs

7 жыл бұрын

Krisitian Hernandez Thanks, man

I couldn’t find a video that would help me until I found this one my mask looks really awesome because of you thanks 👍

@perfect112customs

2 жыл бұрын

Happy to help!

You've just earned yourself a subscriber

@perfect112customs

2 жыл бұрын

Thanks for joining!

I love you! nice goggles

Omg same I was looking for mesh and used the swimming trunks as well!

I actually bought the Lincoln electric welding cup goggles from lowes and did what you said except it came with a black lens so I sandwitched every thing together

@perfect112customs

6 жыл бұрын

A rachnid RLSH Mine came with a black lens, too, but those are a little hard to see through

THIS IS AWESOME

OMG TYSM NOW I DONT NEED TO SPEND 80$ ON ETSY U ARE A LIFE SAVER

@perfect112customs

6 жыл бұрын

gabby miller I'm glad I could save you some money!

@sweety3853

6 жыл бұрын

what is etsy

Best tutorial about the goggles

I'm wordlessly it got Amazing well done. would you sell me one? it's complicated find those out materials here in brazil hahaha. though I love it well Job

Those goggles are easy to make piece of cake bro

Unless I missed it in the vid, where did you get the black parts around the goggles. It looks awesome btw

@alexacrisolo5124

2 жыл бұрын

Pretty sure they are from welding goggles, not quite sure though

@perfect112customs

2 жыл бұрын

If you mean the shutters, they’re made from a plastic binder. If you mean the actual goggles, they’re welding goggles from Amazon

What welding goggles did you get cuz i couldn't find them. Could you link them please. Also great goggles.

@perfect112customs

7 жыл бұрын

Electrum m.ebay.com/itm/Black-Welding-Cup-Goggles-50mm-Eye-Cup-/272611262088?epid=691227916&hash=item3f78e5be88%3Ag%3A4OMAAOSwDmBY3Nte&_trkparms=pageci%253A732a657f-6a47-11e7-b054-74dbd18015fa%257Cparentrq%253A4c52bab315d0a7f27853fc82ffea8d9d%257Ciid%253A12 The price is different, but they look like this

@RandomGameTesters

7 жыл бұрын

Thanks, I needed that link. Well done btw

Finnaly!!! Someone else had the swimsuit idea!!! I thought I was the only one!!!

@perfect112customs

7 жыл бұрын

Garrett Pode I'm glad I'M not the only one, too!

@garrettpode2212

7 жыл бұрын

The Action Figure Geek I was trying to make the whole suit on the week of the midnight showing but nobody near me sold the base goggles 😩

@perfect112customs

7 жыл бұрын

Garrett Pode That sucks, man. I tried getting my suit done in time for the release, but it didn't work out. I did wear it to the movie the following week, though, so it was alright

@garrettpode2212

7 жыл бұрын

The Action Figure Geek yea, I'm gonna wear mine for Halloween and I'm attempting to use those lighter made webshooters so I can suprise the kids on my block when spiderman can really shoot webs 😂

@perfect112customs

7 жыл бұрын

Garrett Pode Ha! That'll be awesome 😂

Lol i'm currently making my goggles and I had the same swimming trunks idea! I'm designing my goggles to move up and down depending on my mouths position. Also instead of using plastic i'm going to use metal.

@Anna-xh6fk

5 жыл бұрын

Pablo Ooh how r u doing that design? I definitely wanna copy the eye movement-I though they were a really cool element of the costume

Dude, those look incredible I made a pair similar but instead of welding goggles I used those gum canister lids but I gotta ask do yours fog up? If so have you found any way to prevent that?

@miguelsalazar8077

2 жыл бұрын

They sell sell fog spray or u can put baby shampoo and wash it away

Is there a certain place or set you got the LEGO’s from? I don’t think I have those certain ones

Hey man I cut the main shutter part out but how do i cut and trace the second part of the shutter that u put on before screwing the goggle

Instead of getting plastic from a binder could I use black thin card?

Do you have a template for they actual shudders? I find myself having trouble free handing it and thought tracing it would be easier.

@perfect112customs

2 жыл бұрын

Sorry, I don’t. I just freehanded it myself

Awsome

Omg so amazing

you should sand them and drybrush them then hot glue the wire down and paint the hot glue silver to add a soughtered effect.

How do I put the goggles on the mask though? Super glue?

Can you please tell me where you get the lens

If I use super glue to stick those goggles onto a fabric mask, would it stick forever??

can you make something similar like this goggles like a eye cup goggles but it has something that you can zoom in and zoom out like a binocular so can you please make one or give me a link to a website where i can buy it but thanks and awesome video also keep up the awesome video :D

How did you glue your google to the mask?

cool

what is the goggles made out of?

Are there any specific lego sets I can buy to get 2 of both of those pieces in it at like a Walmart or ToysRUs? Or are there places that sell the pieces individually? I'd really love to do that with my goggles as well.

@perfect112customs

6 жыл бұрын

ErkFX - Roblox & More! If you search for “LEGO long pin with friction and bushing” you can find them online for pretty cheap

@perfect112customs

6 жыл бұрын

ErkFX - Roblox & More! You can also search for “LEGO 90 degree beam” and find those pieces as well

Where did you get the mask itself

How come you layered it so that the glass is closest to the eye? Why not put the plastic closest to the eye, then the mesh, then the glass? Just asking, hahah. Great video though, such a good help.

@perfect112customs

6 жыл бұрын

SpizzleLep That could have worked, too, but it helps the mesh to lay right and flush when you have the weight of the glass on it while screwing it together

I have the exact same pair of swim trunks

How did you get those perfect lense pieces you cut from the binder? Either I get one that looks really good and the other looks bad or they both look just decent.

@perfect112customs

6 жыл бұрын

Buzz Make one really good one by sketching the shape with a pencil, then trace it onto another circle so you have two, but make sure they’re opposite.

@billciphertoolfan

6 жыл бұрын

The Action Figure Geek Awesome, thank you! By the way, do you know an alternative for scissors when cutting it? Sometimes I draw it pretty good but when try to cut it, it becomes raggedy

@perfect112customs

2 жыл бұрын

@@billciphertoolfan I used tight, sharp scissorS, but you can also use an Exacto hobby knife

Where did you find the goggles

do you have a video in how to make a mask

@perfect112customs

7 жыл бұрын

darkgreetingx I don't, sorry. I wish I would have filmed the process. All I did was place two pieces of fabric together, trace a shape onto one side, pin the two pieces together, sew along the line I traced, then turn it inside out

@TheLuminousDagger

7 жыл бұрын

The Action Figure Geek what fabric should I get

@perfect112customs

7 жыл бұрын

darkgreetingx Get some red material that you can breathe in but is thick enough so it will hide your features (like lips or hair). Red sweatshirt material will work, or you could use a red blanket like the one I used.

@perfect112customs

7 жыл бұрын

darkgreetingx This is a good video kzread.info/dash/bejne/q3V2maqOZ66ad9I.html

what part of the binder did you use for the shutter lenses?

@perfect112customs

2 жыл бұрын

It’s a flimsy black binder, so you can use any part of it

What type of binder was it? I can only find thick ones

@perfect112customs

6 жыл бұрын

BLAIR TBAY The spine says “Casemate / 1 Inch / Poly / Holds 200 Sheets” if that’s any help. It was at Walmart in the crafts sort of area

the action figure geek

What did you use for the outside of the goggles?

@perfect112customs

6 жыл бұрын

WingDing 204 Can you be more specific with what you’re asking about?

Having a really hard time getting the shape of those lenses

Thank you

How do you make the web shooters

what goggles are they and where can you buy them?

@perfect112customs

Жыл бұрын

They’re generic welding goggles, and you can get them from Amazon or eBay

Thx my I am going to try to make it

@perfect112customs

2 жыл бұрын

Awesome!

What welding goggles did you use and where do you get rhem

@perfect112customs

7 жыл бұрын

Alexander Cameron There's a link in the description

@toetskay7508

7 жыл бұрын

The Action Figure Geek ah

Wow

How do you take the goggles to the mask?

@nokillscrew1745

3 жыл бұрын

Super glue

what are the lego pieces called? i dont know where to begin to look for them.

@perfect112customs

7 жыл бұрын

Sarah Harmer Connector pegs and 90 degree beams

@SarahHarmerr

7 жыл бұрын

wow that was quick! thank you!

@perfect112customs

7 жыл бұрын

Sarah Harmer No problem!

where did you buy the welding glasses?

@perfect112customs

7 жыл бұрын

The Manly Astronaut Just search "welding goggles" on eBay, and they should be available for about $8

@manlyastronaut6984

7 жыл бұрын

The Action Figure Geek thanks!

How well can u see out of these

@perfect112customs

7 жыл бұрын

TheSharkMC Not very well, but enough to get around without tripping over stuff

@theinternetisokayy469

6 жыл бұрын

OH LORDIE

Where did you get the piece of glass from?????

@perfect112customs

7 жыл бұрын

Murdoc Pickles There's two of them and they come inside the welding goggles

@murdocpickles8125

7 жыл бұрын

The Action Figure Geek oh ok

Does the Mesh have to be in a circle

@perfect112customs

6 жыл бұрын

Matthew Codiga Not necessarily. It just has to be big enough so that the black plastic can cover the edges of it

I only have a bonet and a pair of gloves and sunglasses can you help me make a homemade with it??

@perfect112customs

2 жыл бұрын

You might need a little bit more than that to make a full suit

@loidforger_187

2 жыл бұрын

@@perfect112customs no i have some pair of homemade suit😀but i need to do it on my mask all i have is a not pure red bonet and some pair of sunglasses😁

@perfect112customs

2 жыл бұрын

@@loidforger_187 Ah, I see! Well to make the mask I just sewed a red blanket, and the goggles are made as I explained in the video. So if you only have sunglasses, I’m not sure you can make it look like this version

@loidforger_187

2 жыл бұрын

@@perfect112customs I'll try my best to make, thanks for making it a little easy hope you have a great day bro

@perfect112customs

2 жыл бұрын

@@loidforger_187 Same to you!

where did you get the glass

@Zenity

5 жыл бұрын

From the goggles.

how did you make the shutters

@perfect112customs

7 жыл бұрын

Nefarious Fraze I traced one of the glass circles that comes with the welding goggles onto black plastic from a binder, then I cut out that circle. I used a pencil to sketch the shape I wanted to cut out, then I cut it out with scissors. I did the same thing again but traced the one I already had to get a consistent shape. Then I cut out a third circle from the plastic and sketched two identical crescent shapes, one for each lens.

I use a plastic black movie case

How's ur sight while wearin these

@perfect112customs

7 жыл бұрын

Shawn Brown Passable, but not great at all. I can get around, but the mesh refracts light in a weird way and the glass gets foggy

@shawnbrown6143

7 жыл бұрын

I figured, these r awesome tho 👍🏻

@perfect112customs

7 жыл бұрын

Shawn Brown Thanks, man

Where did you get the goggles?

@jordanmoore1027

6 жыл бұрын

CoVe SBJ There's a link in the description

@JulioAmazio

6 жыл бұрын

amazon

Hay thanks for the awesome video I am wondering what ID is the LEGO to put in the corner pice I got the corner pice but I just need the peg do you know what ID the LEGO pice is?

@perfect112customs

6 жыл бұрын

Justice Fox-Roper I believe it’s called a “long pin with friction and bushing attached”

@justicefox-roper4283

6 жыл бұрын

The Action Figure Geek thanks I just found the pice thank you so much

Can you see out the Mesh lenses or not?

@perfect112customs

Жыл бұрын

It’s hard to see, especially in direct sunlight, but I can see enough to walk around

@mrcosmo6747

Жыл бұрын

@@perfect112customs ok thanks that’s a big help

@perfect112customs

Жыл бұрын

@@mrcosmo6747 No problem!

where did you get the googles

@perfect112customs

7 жыл бұрын

Fabiola Torres I found them in the street. Just kidding, there's a link in the description

Where did you get the goggles

@briefprogram9542

7 жыл бұрын

Never mind

@briefprogram9542

7 жыл бұрын

I saw your other video

@ids6120

6 жыл бұрын

TitaniumWhiskerz where did he get it?

@briefprogram9542

6 жыл бұрын

amazon. Just look up steam punk goggles and it should appear.

Aren't you gonna show us how you stick the lego pieces?

@perfect112customs

6 жыл бұрын

Jean Nguyen I just used superglue and stuck it on.

@jeannguyen3199

6 жыл бұрын

The Action Figure Geek Oh, ok thank you! 👍🏻

@jeannguyen3199

6 жыл бұрын

The Action Figure Geek Umm when are you going to show the web shooters?

i got it

It’s cool but if only the shutters moved...

Were those swimming goggles

@perfect112customs

6 жыл бұрын

Impulse Storm No, they’re welding goggles

Can these connect to fabric

@perfect112customs

6 жыл бұрын

Zechariah Boswell They sure can. Just use some superglue

the hardest part about this is cutting the binder i can never get the shapes right

Happy

+The Action Figure Geek what kind if dremel bit did you use to cut/shape the goggles?

@perfect112customs

7 жыл бұрын

It was a disc about the size of a nickel

@patrickkarrow

7 жыл бұрын

The Action Figure Geek thanks for the fast reply, I've decided to cosplay as Spider-Man and make the homemade costume from Spider-Man Homecoming. Thanks for the inspiration!

@perfect112customs

7 жыл бұрын

Patrick Karrow No problem! Glad I could be of service

are you sael your costume to Indonesia

Alright add a motor to it so it moves to make expresions

How can someone dislike this

@jordanmoore1027

7 жыл бұрын

Braydon Miller Haha, thanks man

@TheRiot406

5 жыл бұрын

I was wondering the same thing!

where did u get the goggles

@perfect112customs

7 жыл бұрын

Chriff? eBay. Just search welding goggles (they should be about $8)

@bnelssMviewshourago

7 жыл бұрын

The Action Figure Geek thanks 🅱

@bnelssMviewshourago

7 жыл бұрын

The Action Figure Geek also where do u get the glass

@perfect112customs

7 жыл бұрын

Chriff? It comes with the goggles

@bnelssMviewshourago

7 жыл бұрын

The Action Figure Geek figured

my goggles didn't Come with that clear glass that's weird

Hey the seller is away and i cant order the goggles do u know the brand that made them

@perfect112customs

7 жыл бұрын

TheSharkMC I'm not sure, sorry. There's no branding of any kind on the goggles themselves that I can see.

@thesharkmc1309

7 жыл бұрын

The Action Figure Geek I just found the brand its AES industries and the model is a black AES 500. Thanks!

@perfect112customs

7 жыл бұрын

TheSharkMC Nice detective work!

Like

Hey man I um have different type of goggles....

@perfect112customs

6 жыл бұрын

jay_the_boss 12 Crazy

looks kinda hard to make

@ricefield1322

7 жыл бұрын

Jordan Moore it looks cool I would rather just buy it

@perfect112customs

7 жыл бұрын

Jaydon Osburn If you can find a pair pre-made, go for it. But it's really not that difficult to make

@ricefield1322

7 жыл бұрын

The Action Figure Geek you should do more diy videos for this suit you seem to put good effort in them

@perfect112customs

7 жыл бұрын

Jaydon Osburn Thanks! I try my best. Is there a specific part you want to know more about?

@shockblast_cannon7002

6 жыл бұрын

+The Action Figure Geek how did you find the goggles?

I think everyone should subscribe to this guy he seems like the next logan paul😁