Good job really informative

Great Video! Thankyou

@Offroadfarm1

2 жыл бұрын

Thanks for watching

Good to see that.

@Offroadfarm1

2 жыл бұрын

Thanks for watching

I get to pull my 10 speed, 2-3 shift bar snapped. Going to be a fun one

@Offroadfarm1

Жыл бұрын

Good luck on your rebuilt, thanks for watching!

@DieselDaycare

Жыл бұрын

@@Offroadfarm1 got it all fixed up, very simple transmission to tear down. I made a jig to keep the range shafts timed while I dropped them in

@kentsessoms6122

7 ай бұрын

Same as mine the 2/3 broke looking for a shop in NC

@DieselDaycare

7 ай бұрын

@@kentsessoms6122 I pulled my 10 speed and repaired it myself. Easy case to split, easy gearset to time. The rail is a weak spot in these transmissions, and not cheap at all, I beveled the broken edges back very steeply, then welded it up with stainless. Has worked flawlessly. No special tools required to get the case off and rail out

Saludos podrían poner la posición de las mangueras del bastón ala balvoula y al pistón

They could of did much better in the Spicer design room !!! I've drove two trucks with spicers and I didn't like em at all. I'D TAKE A FULLER LATE MODEL 13-18 ANYTIME, I WORKED ON EM 10+ YEARS BEFORE I STARTED DRIVING COAL AND LOG TRUCKS AND A FLATBED AND LOWBOY FOR 25+ YEARS BUT THE OLD SST series spicers 16-20 speed transmission were good trans almost indestructible to be honest (Huge Bearings) but I just don't care for the latter spicers and that's a shame cause a redesigned 12 speed might have given em the best transmission ever but that's life !!! Great video all the best to you and yours Sir.

I have a 10 speed spicer ps0125-10s are these good transmission its on a 9600 cabover it got rebuilt about 1 year ago and now its stuck in 2 gear are these transmission weak Im usually at 90k gross

Thanks for making the video. I didn't understand what the timing marks are for.

@Offroadfarm1

2 жыл бұрын

Thanks for watching!

I have a spicer 8010 5a and when i flip the switch there is a high pitch noise everytime i put tge switch up

How much the end play Of the front countershaft tnx

buen trabajo bro

@Offroadfarm1

Жыл бұрын

Glad you liked the video, thanks for watching!

Hola, me gustaría saber a que camion pertencece esa transmisión? o a que camion le puede servir? gracias

Saludos desde Panamá, bendiciones

@Offroadfarm1

2 жыл бұрын

Thanks for watching

Cómo conecto las mangueras de al y baja

Debería de aser el video en español porque muy rápido habla y aquí me sale escrito lo que dice pero a esa velocidad ni con una caja spicer alcanzo a leer lo que dice

Hi. My truck is a 10 speed manual (Eaton) the gears stock was on high range (I was told that this was a minor issue) But The mechanic told me it's a big damage, they need to rebuild it for $ 3500 without labor!!!. I agreed. Then I found out, that he replaced it with another one, that one doesn't have a cooler (my transmission had one) tell me please if what the mechanic did is right/okay?. Should I accept this transmission ( the new one without the cooler)? He's working on the truck now, haven't finished yet.. I still have time... should I accept what he did or not?? Please reply 🙏

@Offroadfarm1

2 жыл бұрын

This is a hard question to answer. I would ask the mechanic about your concerns with the cooler but there are many Eaton's out there without a cooler. Now about swapping the transmission. More than likely your mechanic is trying to save you some money. If you have $3500 of parts damage then your looking at a huge repair bill, possibly more than double the cost of parts. With that kind of damage your talking a total rebuild and that takes time and time equals money at shop rate. I hope this helps. Thanks for watching

@mustang4928

2 жыл бұрын

@@Offroadfarm1 Thanks for your reply 👍

Can't really find a video where it's been mounted back on the truck . You have any ?

@Offroadfarm1

2 жыл бұрын

Sorry I don't have any videos of installing truck transmissions. We only work on carry outs. Thanks for watching!

@mamaafrika3689

2 жыл бұрын

@@Offroadfarm1 I am a truck mechanic..and out method of mounting transmission here (Nigeria) is very complex.. 4 people work minimum. But my USA base supervisor always boast how only him sue to mount transmission by himself back in the USA. So am just curious to know how it's done over there in the USA..

@Offroadfarm1

2 жыл бұрын

My father in law was a truck mechanic for over 40 years. He pulled, repaired, and re-installed thousands of transmissions by himself. He did finally hire a helper for about the last 10 years or so he was in business. He also used to mount clutches by hand, by himself. Your supervisor is telling the truth, it's done by one person here in the USA all the time.

@mamaafrika3689

2 жыл бұрын

@@Offroadfarm1 of course I know it's possible.with the right equipment down here we are kinda working locally and lack advance equipment...like I said earlier, am just curious to know how it's been done over there.. Am also aspiring to migrate to USA or Canada soon. So am trying to get an insight ..thanks for reply

Where can I get gaskets?

@Offroadfarm1

2 жыл бұрын

Which gaskets do you need? You can try fleet pride. Thanks for watching

@RubenRamirez-wt4vg

Жыл бұрын

I needed the top, pto cover , front and rear, I got them from pro gear out of Florida, thanks for your fast response

No New Bearings? It's already apart.

@Offroadfarm1

Жыл бұрын

The customer didn't want the added expense. The oil that we drained out didn't have a lot of metal in it, so we just washed everything up really well and put it back together. Bearings in these transmission can be pricey and cost can add up quickly. Thanks for watching!

Yeah backyard mechanics don't pay much attention to things when disassembling, they just like throwing things around instead of lodging them down lol

@Offroadfarm1

2 жыл бұрын

Thanks for watching