9:44 c-c-cheek filter mask? *shudders*

@intelo420

6 жыл бұрын

😂

This mask could've been worse. I've seen an image of one of the prototypes for this mask which had a huge cheek filter on the side instead of the 40mm port.

@Weaponsandstuff93

6 жыл бұрын

Yeah no idea what they were thinking with that.

@tankistsdivana

Жыл бұрын

​@@gasmaskeryоригинальный кремний? Или говно склейка от суси? Большинство кремниев с неоргоса в коллекциях известных газеров снг

I replaced the straps and my inner hood doesn't interfere with my eyes whatsoever. Good ol' soviet consistency

@Weaponsandstuff93

6 жыл бұрын

You might just have it in a different size, I don't know what the difference is between small and large regarding the inner rubber.

This is a mask I recently considered for a Soviet build, so I'm glad I watched this and went with something different.

When I first got my gp7 it was very tight and uncomfortable but for whatever reason it just slips on now. Perhaps it's because I put it on often, and I solved fogging my moving the mask up so that the mask doesn't touch the bridges of the nose...

@Rekonsoepic

2 жыл бұрын

Yo head and face got used to it

I agree, PMK2 somewhat fixed the issue with fogging, since you can aim the intake valve towards the lenses.

@bigturn1051

6 жыл бұрын

Jari Hohtari how so?

@hunivox

Жыл бұрын

@@bigturn1051 we still are waitinf for answers

thanks for doing this review

@Weaponsandstuff93

6 жыл бұрын

No problem.

Has anyone else noticed on the GP-7V the eye lenses have extra seals on the inside? I don't know what they are for but made use of them by putting anti-fog lenses in them and it works brilliantly. But this video definatly highlights the differences between the PMK and GP-7. Boy am I glad I made the right decision.

@Weaponsandstuff93

6 жыл бұрын

The normal GP-7 is awful as well, I can't speak for the V model as I don't have it.

@Uajd-hb1qs

6 жыл бұрын

They must have made improvements because I estimate, endurance wise, the V model is about as comfortable as a GP-5. But I always have to wear a balaclava with the GP-7V so I don't lose any hair to its ever so sticky rubber.

@ottoll9940

2 ай бұрын

Pmk and gp-7 are both made with the seals for antifog glasses.

I’ve seen a pmk gas mask with a exhale valve on the side and the filter port in the bottom is this normal or is it a special pmk

@Weaponsandstuff93

4 жыл бұрын

You can I think but it's also possible to dismantle and reassemble the mask to change where the ports are

Maybe that!/ just my mask but I've got the exact same PMK mask (voice wilther is black tho) and it fits well. I have no problems with vision, but yes, the mask fogs really fast and its really soft. PMK-2 is actually the same thing, but has only iron-ish metal parts and different filter system. Both of PMK's are awful to wear with m88-like helmets (the upper part doesnt fit) and it only works with spetsnaz round helmet with face shield. Both of them doesnt have nose cups either, so buying another PMK is just a waste of money, even for collection. Telling this a person who owns both of them. They look nice, but not good at utility or military use.

@Weaponsandstuff93

6 жыл бұрын

Thanks for the honest info, I think the PPM-88 or GP-9 look much better masks than the PMK series.

@aalik-wy5nf

6 жыл бұрын

If you need info about russian stuff, you can always ask me! :D

I have a GP7 b.,.. wich is simular. I can see the criticism but, i found out that mine is a size 1, wich i normally take a medium size. I dont have a high degree of fogging because more of my nose and mouth are in the cone. If i used a bigger size, i would imagine a bigger gap between my nose and mouth and the mask, making more exhale steam. Idk...maybe people just need a tighter fittng mask with these. Masks with a seperate nose and mouth cone can be larger and more spacious. Just some thoughts on the matter. Thank you

is it possible to to fold the inner rubber annoying flap out to be almost like an extension of the frontal mask

@Weaponsandstuff93

5 жыл бұрын

Not really as it has straps that get in the way.

@vincentp.3573

5 жыл бұрын

ahh okay@@Weaponsandstuff93

Would you recommend the German zodiak suit and would it work with a mask with the filter on the side

@Weaponsandstuff93

6 жыл бұрын

Never used the Zodiac suit but I hear they are really uncomfortable.

@zapbull7012

6 жыл бұрын

Weaponsandstuff93 ok thanks

Mine has a gold color instead of Black around the lenses is it another mask?

@Weaponsandstuff93

6 жыл бұрын

PMK2 maybe, might depend on which factory made it.

Gp-5m,gp-5,PBF (hamster gas mask) and shsm gas mask are good for people who has small head right?

@Weaponsandstuff93

6 жыл бұрын

Yes as long as you get them in small sizes.

@pedoslayer

6 жыл бұрын

Weaponsandstuff93 Thats nice

What is the cheapest side filter gas mask? Thanks.

@Weaponsandstuff93

6 жыл бұрын

Finnish M61 probably.

I bought one of these for Halloween and want to know if the filter is dangerous. If anyone knows, a response would be nice. The marking on it are as such: EO-62-H 26-10-76-130 Б 0066 Thanks!

@Weaponsandstuff93

6 жыл бұрын

I'd assume that's a filter from 1976 so don't use it.

@Tobogganeer

6 жыл бұрын

Ok thanks

@aleksejjovanovic986

2 жыл бұрын

I would not use any Soviet filters. Just buy NATO filters and if they dont fit buy an adapter for the filter. They are cheep, i bought 2 of them from Swedish survival site.

can you make a video about how to clean knives?

@Weaponsandstuff93

6 жыл бұрын

www.wikihow.com/Clean-a-Knife

Pmk 3 is basically a much improved pmk. The inner mask is slightly smaller i believe, it has an oral nasal cup, better fov, dual filter setup however the drinking system is fragile

@Weaponsandstuff93

6 жыл бұрын

Sounds a lot better but yeah seems annoying they couldn't actually fix everything.

@bigturn1051

6 жыл бұрын

Weaponsandstuff93 i was actually going to get one but it was only available in size one and after measuring myself it was too small.

I have a gp7 in my collection and I find it comfortable now because when I got it it was absolutely uncomfortable in the straps are so hard to adjust keep in mind it was the original gp7

@Weaponsandstuff93

6 жыл бұрын

So how did a mask you find uncomfortable suddenly become comfortable?

@redacted3421

6 жыл бұрын

Well it's not as comfortable as I said it still pulls on the hair and it fogs up the lenses all of that but I just made it so I can fit my head better and I'm not saying Oh no wrong and stuff but I thought I'd spread my opinion about it

Good video but I agree the PMK had many downfalls especially the soft face piece.

@Weaponsandstuff93

6 жыл бұрын

Yeah it seems a shame that it was designed to do a lot but ended up being a lot weaker than some of the previous helmet masks.

PMG2 and PMK2，which is better? Price + function + comfort

@mysticcollector8258

3 жыл бұрын

Pmg2

Should I get a m40 or a s10 which is better to buy??

@ashtondion4823

6 жыл бұрын

Foxy 5205foxy4 probably the s10 because there are a lot of them in surplus for about 50-60 usd the m40 are still used by the U.S so there hard to find and expensive

@Weaponsandstuff93

6 жыл бұрын

Depends if you are in America or not, if you are in America the M40 is actually obtainable fairly easily.

@Omega_-cc6pd

6 жыл бұрын

the m40 and s10 are really good mask's it's kind of hard to choose really but i probably go with the s10

You have to pull straps harder so the inner hood doesn't get in your eyes and the sight gets wider.

I have the PMK-2, and I think its fine! But there are some major changes between the 1 and the 2 though

@Weaponsandstuff93

6 жыл бұрын

So yeah they improved it them as I said they probably did, as displayed in the video PMK-1 is pretty awful.

@user-rp3fi5io4k

6 жыл бұрын

Yes it is 😂

First comment and I'm getting a Vietnam out fit from 1968 and need a gas mask what would be a good mask btw good vid

@Weaponsandstuff93

6 жыл бұрын

Your not the first comment. You'd need a M17 or XM28 or maybe even an M9.

@justrandomman2415

6 жыл бұрын

Weaponsandstuff93 why not a m65 or 62 they used that too

@Weaponsandstuff93

6 жыл бұрын

The US didn't.

@sprungdig8027

6 жыл бұрын

Weaponsandstuff93 I bought a gp 5 mask and I was wondering what to do with the filter‚ do I keep it or dispose of it?

@justrandomman2415

6 жыл бұрын

TheRealLemon of asbestos comes out dispose it do a test shake it over a dark surface if white powder or any powder comes out then throw it out

PBF with 40mm well i think that ideas is pretty similar to pmg isnt it?

@Weaponsandstuff93

6 жыл бұрын

The PBF is a better mask inside than the PMG, it has an oral-nasal cup and a better voice diaphragm.

any differences to the 2nd and 3rd Generation PMK?

@Weaponsandstuff93

6 жыл бұрын

There are, I don't have either so I'd advise you to google it.

@ottoll9940

2 ай бұрын

There are many. Pmk-3 glasses don't get foggy and the water system is improved. Glasses are wider also

Was this mask ever used on Chernobyl? i bought one that came from ukraine and the model says it is from 1986 in the bag, besides it came all dirty, i cleaned every mold i had but from what i saw she has a stain on that part of her chin that i don't know the name , sorry for the ignorance. Is she safe to use?

@Weaponsandstuff93

4 жыл бұрын

Not as far as I'm aware, yet I've never owned a single contaminated gas mask either with chemicals or radiation.

Are the pmk1 filters safe

@Weaponsandstuff93

5 жыл бұрын

No

Hey weaponsandstuff93, you should look at the pmk-4 gas mask, its a copy of m40 i think or either a copy of mp5 idk, but its a really cool gas mask. also check out pmk-5 too.

@hauptmannfriedrichkonrad4105

6 жыл бұрын

pmk-4 is one of the best russian mask i ever seen cause it has the nose thingy to stop the lenses from fogging.

@Weaponsandstuff93

6 жыл бұрын

Sadly never seen any Russian mask post PMK for sale at reasonable prices.

@hauptmannfriedrichkonrad4105

6 жыл бұрын

yep ;(

This is probaly unhelpfull, but have you tried wraping the exess rubber around your head?

@Weaponsandstuff93

6 жыл бұрын

As in opening it up? That would mean your face would be too far inside.

@b.t.jevsevar

6 жыл бұрын

Oh I see, it doesen't have any other padding other than the excess rubber. Maybe it was an attempt at creating lighter padding.

What is a tiso system?

@hectorcorona8071

4 жыл бұрын

Anne Dank where the air comes in

@martijnheil8825

4 жыл бұрын

Tissot tubes, invented by a French guy over a century ago. It's two tubes that lead from the inhale valve to the eyepieces, so that a part of the air that is sucked into the mask when you inhale is directed directly at the eyepieces, causing them to defog on each inhalation.

Nice video

@Weaponsandstuff93

6 жыл бұрын

Thanks.

Most of these problems can be easily fixed

@aguy6898

3 жыл бұрын

How so?

I know you probaly dont want to get anymore gas masks right now at this moment but I'd like to suggest one of the next gas masks you buy Could you get the Swedish Type 4 Gas Mask?

@Weaponsandstuff93

6 жыл бұрын

Only if I see it cheap, masks like that tend to deteriorate quickly due to the rubberised canvas design.

@whodis375

6 жыл бұрын

Okay, And how much is cheap?

@Weaponsandstuff93

6 жыл бұрын

Less than £30 or so.

@whodis375

6 жыл бұрын

Okay www.ebay.com/itm/WWII-Sweden-Swedish-gas-mask-Typ-4-Old-vintage-army-military-gas-mask-1939s-new-/262860805384?hash=item3d33b99508:g:yvMAAOSwEW5Zeg2d Theres probaly cheaper ones out there but yeah...

The PMK was originally going to be another cheek filter mask Here's a photo of a prototype: goo.gl/mRjcW6

@Weaponsandstuff93

6 жыл бұрын

As I said in the video, that would have made it even worse.

i fine the pmk is only good for display but for use it's a big nope because it does not have a oral nasal cup and the inner mask is not good at all and the strap's are terrible also the rubber of the mask does not feel good on the face in my opinion the m40 and the fm12 and the s10 are mask's that i would perfer to use

@Weaponsandstuff93

6 жыл бұрын

Yeah or earlier Soviet masks such as the ShMS are much better in terms of practicality.

hey bro, you should watch the movie called 6 days. it takes place in uk and all of the sas are wearing a cool gas mask. im sure you love it

@Weaponsandstuff93

6 жыл бұрын

Ah yes the film about Operation Nimrod, I'll watch that at some point.

Maybe the masks peripheral seal was made for the Slavic face shape so your eyes are in the “wrong” place

@Weaponsandstuff93

6 жыл бұрын

Could well be, but I don't have face shape problems with other Russian masks.

Can you do a pellet or air rifle review

@Weaponsandstuff93

6 жыл бұрын

Already reviewed both my rifles and all the pellets I've used.

@samhuxley7609

6 жыл бұрын

Weaponsandstuff93 okay you have a good reason

I want to get one soooooo bad

@Weaponsandstuff93

6 жыл бұрын

They look cool I guess.

I never actually had any problems with the rubber touching my eyes, maby i have a big head.

@Weaponsandstuff93

6 жыл бұрын

What size is it?

@rufus3549

6 жыл бұрын

it's a size 2 there is also two other things written in the mask bu i think those are just model numbers and info about the mask but i will tell you anyway, there is a russian character with a 67 and a T-87 with some brail on the side, but like i said it's just other info

It looks like the mask on THE DIVISION

@thesearcher8586

6 жыл бұрын

Paul Browne yes the sanitation crew

Do you have any serbian gas mask?

@Weaponsandstuff93

6 жыл бұрын

Yugoslavian M1 and M2 respirator.

@pedoslayer

6 жыл бұрын

Weaponsandstuff93 have you ever done a test or a review on thoses serbian gas mask?

Still getting a pmk-2.

@Weaponsandstuff93

6 жыл бұрын

I doubt it.

@bigturn1051

6 жыл бұрын

Weaponsandstuff93 im only looking for aesthetic so comfort and practicality take a step back

@Weaponsandstuff93

6 жыл бұрын

Ah I thought you were asking me if I was getting one.

How is having a soft mask bad

@aleksejjovanovic986

2 жыл бұрын

Because it moves around a bit more when you have it on you. Only for those that dont know that you have to tighten it up some more. I have no problems with this mask. I have a theory why this mask is soft, because of the Russian cold. I bet harder masks get a beating faster than this one. One more thing why i prefer this mask, it was used in Chernobyl. Cant say that any other mask has that experience on the field. Hahaha

Just got my pmk1 today. They’re supposed to run tight. The looser yours is the more it jiggles and moves. Hate to break it to you but it’s a great mask, you just didn’t shop properly. Or your face is just an odd shape (no offense I just think it could be an issue)

@aleksejjovanovic986

2 жыл бұрын

I got mine today, its a bit of pain in the ass to put it on as i have it tight also so it does not move around. Other than that its a good mask. Now i only have to do some physical activity to test if it fogs too much. Tbh, i had Yugo gasmask and Swedish gasmask and they all got foggy... At least with PMK-1 i got anti-fog stuff with it. :)

Pmk 3 is in fact pretty good and pmk s is also good, pmk 3 and s had pral nasal cup and straps that actually work

@Weaponsandstuff93

5 жыл бұрын

Good to know

@gavina777

5 жыл бұрын

@@Weaponsandstuff93 yeah but i rather have an fm 12

@gavina777

5 жыл бұрын

@@Weaponsandstuff93 the pmk 3 costs like 40£/45£ normally i think it's a bit overpriced

i love it it looks cool works amazing and its soviet

Great video

@Weaponsandstuff93

6 жыл бұрын

Thanks.

Got this for $15 new at a Russian market

@Weaponsandstuff93

5 жыл бұрын

Cool

Well... at least it looks nice

@Weaponsandstuff93

6 жыл бұрын

Sort of.

Pmk haves many minus Drinking system works is bad . Filter place is uncomfortable.

My pmk 2 fits me perfectly, but I'm mostly slavic so ??? As for quality I avoid GP7 and pmk 1 as the 2, and 3s were made once the Russian federation was established, not at the end of the Soviet union

its foging up xD

@Weaponsandstuff93

5 жыл бұрын

Because it's a bad mask lol

PMK-3 seems to be a lot better

@Weaponsandstuff93

6 жыл бұрын

Probably is.