SONYX NEO PIXEL LED LAMP (Full 3D Printed Lamp) CR10sPro Nanoleaf Replica PRO
MR.SONYX NEO PIXEL LED LAMP 🤩
No soldering or wiring is necessary. everything is connected to a bluetooth controller and controlled by
mobile app.
(Because of the corona virus, my plan for this project was completely destroyed.
Due to delivery delays, I was too late with printing. now unfortunately i have already started with my new job and further training at the same time.So I don't have much time to make videos at the moment)
I WILL EXPLAIN EVERYTHING IN DETAIL IN ---- [PART02] ---- OF THE TUTORIAL 😁
Thank you for your feedback and support!
The parts were printed on my creality CR10sPro in about 150h and it took about 2.5kg of Sakata3D filament. I used a 0.6mm nozzle to speed up the print time.
PART LIST
❤ # Creality3D Cr10sPro ❤
❤ # Sakata 3D Filaments PLA 850 Natural ❤
sakata3d.com/gb/pla-850/22-pl...
❤ # Sakata 3D Filaments PLA 850 White ❤
sakata3d.com/gb/pla-850/24-pl...
WS2812B LED Stripes 5m - 60/1m
a.aliexpress.com/_dU2N4Bz
LED Pixel Bluetooth Controller DC5-12V 3Pin
a.aliexpress.com/_dTbtMmx
LED Signal 1 to 2 splitter 3pin
White Matte Spray Paint (for GLAS)
www.amazon.de/dp/B07PN64S14/r...
5V DC POWER SUPPLY
de.aliexpress.com/item/327948...
www.thingiverse.com/thing:435...
Пікірлер: 193
Goooosh id like to see part 2 now! Ur a master!
super
you did great , Waiting for part 2
Wonderful work my friend. One of the best DIY Nanoleaf projects I have seen. Waiting for Part 2!!! when are you planning to have it released?
these are without doubt the best LED wall lights i have come across. Thank you for the Thingiverse link, i will be trying to do your work justice in the near future.
@xd98josue
2 жыл бұрын
I don't see the link, can you please pass it on to me
wow
This was really helpful!
good job. i like it
Nice
Thank you very much. Very inspiring from Indonesia, really like your work :)))))))
Hey excellent work! Thanks for the stl by the way :) Do you think it is possible to avoid printing glass part by using acrylic sheets? In this case, is there any particular thickness to chose, in order to fit the other STL parts?
You are the boss, it’s awesome!!! I’m gonna star printing so when you upload part 2 i will have the parts to follow along.
When the part 2 is coming out? I wanna do it!
What print settings (infill density, infill pattern, print speed) do you use for the clear parts (DIFUSOR HIGH and GLAS HIGH)?
@jansony2670
3 жыл бұрын
They need to be solid. For the GLAS you take Lines or ZigZag. Change top/bottom line direction to [180,90] im cura I will explain more in part 2 in my christmas holiday's (in about 2 weeks)
@cahittaskn5922
3 жыл бұрын
@@jansony2670 Hi, thanks for the great job, still waiting the part 2 or more detail.
How long is this led? It’s not 1 meter is it? That’s too small
we need part 2 :D
What is the purpose of the spray paint? Your notes imply you painted the GLAS plates? I considered painting the frames a matte white, but didnt think I would need to paint the plates.
Love it mate. When is the next video coming ?
Je viens de finir la mienne. Je me suis permis de modifier quelques trucs mais ton post sur thingiverse m'a été d'une graaande aide ! Merci à toi !!
@jansony2670
3 жыл бұрын
De rien mec 😁👍
Monsieur, this is the most perfect DIY one i have seen. Thanks for the sharing and the inspiration! I love the internet for content like this :)
@jansony2670
3 жыл бұрын
Thank you, appreciate it 🍀😁👍
Your Dyi is the best I’ve seen you really put some time to defuse the led lights and it shows! Badass build brother !
how many segments and how many pixels per segment did you use?
Could I modify your design so I can make different patterns or add a way like the nano leafs since it seams the ending looks a bit darker I assume from lack of power at the end so I wanted to add a way to power inject power from the beginning and end also where’s the vid at?
@1101jcking
3 жыл бұрын
I have yet to research this topic, but intend to get individually addressable LEDs to ensure this is possible later down the line. I have already started the pieces for it so I'll let you know how it goes.
Hallo kann mir einer sagen ob die abdeck platten gedruckt sind und wenn ja mit welchen Filament
@jansony2670
3 жыл бұрын
Ja die sind gedruckt und von hinten mit einer dünen schicht weissem farbspray besprüht worden. Filament ist Natural Transparent. (der Difusor wurde auch mit dem gedruckt.)
bạn dùng cách gì để tản ánh sáng vậy,cảm ơn bạn
Part 2 pleaseeeeee !!!
How big are the holes for the LED-Stripes?
Was hatten die dreiecke für eine maße?
Whats Up brow, Im from mexico, im so proud about this project, its so fu***ng amazing, and im thinking on buy a 3d printer... How did u make the front? with whiteFilament? natural filament? wich one bro?? I really like this video man, this is better than the original hahaha
Looks cool Dude, I am also a member of the Group too, I will look you up.
wie hast du die 2 led streifen verbunden?
@jansony2670
3 жыл бұрын
Mit einem Splitter. Denn den ich verwendet habe gibt es nicht mehr zu kaufen. Musst mal schauen was du bei euch so kriegst. So sollte der aussehen: www.digitec.ch/en/s1/product/phanteks-3-pin-digital-y-splitter-rgb-400mm-modding-illumination-10393780?gclid=Cj0KCQiAtqL-BRC0ARIsAF4K3WGeLaTzpHFXy1eRWQUhTwZnvGnqIodxGuQqamzZDryDer_3rGpWhYUaAqAsEALw_wcB&gclsrc=aw.ds
Are the faceplates 3D printed? Or are they acrylic? If printed how did you hide the layer lines so well?
@matthewdore8111
3 жыл бұрын
I am wondering the same thing.
@aisukurimu9341
3 жыл бұрын
It was 3D printed. Look at the lowest link in the description. The front panel is in the files. There are tutorials about how you can smooth out 3D prints.
Im waiting for Part 2 👌😜😅
@thorstensteidel9973
4 жыл бұрын
No Problem, im printing since 5 days all parts.... Nearly 50% ist done 😅🙄.
@FlorianGareis
4 жыл бұрын
@@jansony2670 Still no part 2?
@cncstudio5800
4 жыл бұрын
Waiting for part 2
@AwesomeCubing
4 жыл бұрын
I am printing this out for myself right now!! I hope that part two comes out soon. But there is no rush because I get that the Pandemic has made it hard to do a lot of things. :)
@masterchris6939
3 жыл бұрын
Part 2🇿🇦
salut a toi super diy mais comment cela ce fait qu'il y ai deux fois les meme a chaque fois dans le fichier
@jansony2670
3 жыл бұрын
Salut mec, je ne comprend pas la question 😊english?
Hallo ich habe der komplete stl datei auf 90% reduziert und mit Anycubic I3 gedruckt das projeckt ist pefeckt ..habe nur eine frage antsat Y spliter kahn ich der led strip auch Löten oder ? danke tolles projeckt
These function better then the one you can buy at high cost . Well done 👍
Hi, which LED strip would you recommend? (aliexpress, ebay, amazon, ..) The one in the label is not available. ☺️ Its great!
@jansony2670
3 жыл бұрын
Hey make shure to use WS2812 LED stripes. www.amazon.co.uk/dp/B088BPGMXB?pd_rd_i=B088BPGMXB&pd_rd_w=zWWC2&pf_rd_p=011646eb-9e9b-4015-898f-4e475f8c352f&pd_rd_wg=NFjhb&pf_rd_r=3W970067GVCJ2R86KFHX&pd_rd_r=2e2a28e8-502b-44a1-9dfe-b12994826d88
@krystofdolezal2065
3 жыл бұрын
@@jansony2670 thank you! 👍😊
How is the installaton on the wall ?
Hi, really interesting project ... so the body of the triangles is made with white PLA and the top flat "cover" is made of clear pla? thanks
@groundpounder3396
3 жыл бұрын
Yes 👍 the clear pla is spray painted with a thin layer of white
@darrylportelli
3 жыл бұрын
@@groundpounder3396 only the flat top part (part named GLAS) printed in clear? The others are all printed in white? Thanks !!!
@groundpounder3396
3 жыл бұрын
@@darrylportelli the DIFUSOR part is also Clear.
@darrylportelli
3 жыл бұрын
@@groundpounder3396 cheers mate ... might start working on this project as it looks super awesome .. might have a couple of questions along the way :) thanks !!!!
@groundpounder3396
3 жыл бұрын
@@darrylportelli thank you ☺️👍
any one plz help me .. new to 3d printing .. which parts to print for the build i am not able to understand , there a many similar parts .. need to know . which parts are need to complete one leaf # of parts etc and can i scale it down a bit ?
@jansony2670
3 жыл бұрын
Hey Farukh Scaling down is not possible. The difusor will not fit anymore if you scale it. The full part list and build plan you can see at 04:12 in the video Thank yoi 😁
@MrDevilwing
3 жыл бұрын
@@jansony2670 how about i scale every thing down proportional. Top , bottom and the diffuser
Can you make a hexagon shape nanoleaf??
Did you twisted the led strips at the routing diagram? I'm confused at p2x links, thanks and amazing job dude
@jansony2670
3 жыл бұрын
Yes correct 👍 thank you 😊
Nice Video! I build the lamp too, i buy now all parts and beginn to print! thanks!
BRO YOU ARE LITERALLY GOD
An extra layer of diffusion and a white back plate would make these better than nano leaf.
Wow I thought ur account password got lost or something, but this project was worth the wait love the look. do you think transparent Petg will work I didn’t have any natural pla and I can’t find a perfect one. And I’m trying to print more Petg since it’s stronger and easier on my machine
@jansony2670
3 жыл бұрын
Hey mate 😋 yea i know it is a shame 🙈 yes petg works also for the GLAS and DIFUSOR
@SlippySkip
3 жыл бұрын
@@jansony2670 awesome. Do you think 144 per meter leds would look more defused compared to 60 per meter leds? Also how much did this all cost?
@jansony2670
3 жыл бұрын
@@SlippySkip you need to much power for 144 Leds/m (ampere) and most controllers only allow up to 500 - 1000 LEDs to be controlled with. So better go for the 60 Led/m 😊👍
@SlippySkip
3 жыл бұрын
@@jansony2670 alright thanks 👍
You sir are a boss, gonna make this for my gaming room :)
@holewijn
4 жыл бұрын
@Mr. SONY3DPRINT is it possible to add a mic so it goes on music?
@jansony2670
4 жыл бұрын
Yes it is posible to run the music from your phone and from your phone microphone 😁👍
@jansony2670
4 жыл бұрын
and if you have bluetooth on your Pc/Laptop you can play music from them 👍
@holewijn
4 жыл бұрын
@@jansony2670 that's awesome so blth it is tough my desktop
what adapter do you use for those 14 led lights? is 5v 10a enough?
how much power supply you use?!?!?!
Very good résults ! I have two question You have two alimentation for the all build ? You thinks we Can have juste one ? You buy special strip led or the basic one ?
@jansony2670
4 жыл бұрын
Hello , what do you mean by alimentation? 1x Power Supply + 1x Controller
@sentex54
4 жыл бұрын
@@jansony2670 you weld the two 5m strip on one controler? You use basic strip for the build ?
@jansony2670
4 жыл бұрын
@@sentex54 no welding or soldering ❗ used a 3 pin connector splitter 👍 on one side is connection to Bluetooth controller and on the other side are 2x LED stripe 3pin cable connector 😀
@sentex54
4 жыл бұрын
@@jansony2670 thanks. Can't wait to see part 2 😮
@jansony2670
4 жыл бұрын
@@sentex54 a.aliexpress.com/_dXJ1oLv No problem 😀👍
Would love a part 2!
i need part 2 :(
i need part 2 pleaseeee
Gibts eine Möglichkeit das ganze zu erweitern? Kann man weitere Stripes einfach verbinden?
@jansony2670
3 жыл бұрын
Ja natürlich, aber dann nur mit löten
@stefanmi7800
3 жыл бұрын
@@jansony2670 wie sieht es aus mit Part 2 ???
i want a second part
This is really cool but the tutorial feels incomplete. How are you controlling the LED's? Are you using addressable strips or just regular strips? Is there other parts I am missing?
@jansony2670
4 жыл бұрын
Hey thx for your comment 👍 this is part 1, i will release part 2 soon. The corona virus destroyed time planing for this project. And now i have to much work and almost no time for making videos. I just released part 1 of the tutorial so you can already start with printing the parts 😊 and part 2 will come in 1-2 weeks. Tomorrow full part list and instructions in the description 😁
will a second part come?
Bro can I make these at home
@jansony2670
3 жыл бұрын
Yes offcours 👍
Brauche ich 2x 5m LED Stripe oder reicht 1x 5m für alles?
@jansony2670
3 жыл бұрын
Genau 👍 die werden dann am anfang mit einem splitter verbunden ☺️
@andyfischer7277
3 жыл бұрын
@@jansony2670 2x 5m LED or 1x 5m LED. 10m LED or 5m LED?
@jansony2670
3 жыл бұрын
@@andyfischer7277 2x 5meter
@andyfischer7277
3 жыл бұрын
@@jansony2670 thx
For some reason I feel like eating a croissant now ;-)
What's the spec's on the power supply?
@jansony2670
4 жыл бұрын
5 Volt and 10 Ampere
Part 2 bro.. 😀
@jansony2670
3 жыл бұрын
It is coming on Christmas Holiday 😊 sorry for the long waiting
Awesome project dude, now what is the difference between P2 Bottom High and P2X Bottom Hight?. Also P2 Top end High won't fit on P2 Bottom Hight.
@jansony2670
3 жыл бұрын
Hey the differents are some tiny lashes on the corners where the LED strip crosses each other. 👍 P2X is for Crossing led parts and P2 for the normal ones (see the routing and printing diagramm in the video)
@Uplink64
3 жыл бұрын
@@jansony2670 Thanks Dude!
I really need help my 3d printer has troubles printing out triangles lol. It doesn’t stick when makin the angles
@jansony2670
3 жыл бұрын
Did u try to use a brim?
@HempThief
3 жыл бұрын
No.. what’s that?
Are you happy with the CR-10S Pro I’m in the market for my 1st 3D printer
@jansony2670
3 жыл бұрын
Awesome machine 👍 i recommend to buy the CR 10sPro V2. Printing almost 24/7 for more than a year now 💪
Waiting for part 2, please
when is coming part 2? :p im w8 for sart print
The frontral plate and white or natural pla? Thank you for your work.
Where is the second part?
Will part 2 ever release??
Best cliffhanger ever 😄👍 still no part 2 hahaha
@jansony2670
3 жыл бұрын
I know you will not believe it...but part 2 is coming soon ☺️😋
Question are you using Arduino
@jansony2670
4 жыл бұрын
No 😁 Smartphone Bluetooth app 👍
Imma try this now I bought a 3d printer ! . Anyone that is going to try this keep in mind he used natural pla for the front sheet panel and inner defuser, The rest base and spacers are white pla
We're waiting part 2 🙂
part 2 its 2022 now boss we need you
Wow! How’d you do those patterns with an LED light strip?
can u please provide me the 3d print file of nano leaf panel
@jansony2670
3 жыл бұрын
Hey you can find all the files here 👍 www.thingiverse.com/thing:4353656
Will be part2?
Good work but, that's not how the original works bro... Why don't you make it plug and play? Take some LED pins and mount them on the sides, on one side a female connector and on the other 2 sides male connectors, then also mount some cheap small magnets so it will hold it together. When done, you can just plug the panels on other panels like the original one.
Maan. I need part 2 so badly. When will you be releasing the it? Cant wait. Instant sub from me :)
@jansony2670
3 жыл бұрын
1 week ☺️👍
where is part 2?
Any idea on when part 2 will be out? Is COVID delaying it?
@jansony2670
3 жыл бұрын
Part two will be released on Christmas Holiday 😊
@rodrigocovas
3 жыл бұрын
@@jansony2670 We are all waiting !!!! is Christmas 2021??? Lol just kiding, but still waiting.
Kommt part 2 noch diese jahr 😂 Brauche dringend Infos zur Verkabelung
@jansony2670
3 жыл бұрын
Na dieses jahr ist ja leider schon fast vorbei 😂😂😂 Spass bei seite, hab die meisten aufnahmen schon im kasten. Muss am wochenede noch alles schneiden und dan lad ich es voraussichtlich am sonntag oder montag hoch 😊 sorry für die lange wartezeit
@felixreiser6745
3 жыл бұрын
@@jansony2670 danke für die schnelle Antwort kanns kaum abwarten freu mich auf den zweiten Teil frohes neues
A quand la partie 2?
can you give me the file?
that lamp looks great! any chance of getting second part?
@jansony2670
3 жыл бұрын
Yes Soon ☺️😅
@wtozafignja
3 жыл бұрын
@@jansony2670 That's good news. Thank you sir :)
Wenn du alle kosten zusammen rechnest auf wieviel kommst du da ? :D überlege mir auch einen 3d drucker zu kaufen, da ich eine Nanoleafsucht habe 🤣
@jansony2670
3 жыл бұрын
Materialkosten für 14panels liegen um die 120.- Euro. Der drucker kostet um 400.- Euro 😝
@Schmooker
3 жыл бұрын
Danke für die antwort :) ich finde deine sogar besser als die originalen :D
@jansony2670
3 жыл бұрын
@@Schmooker vielen dank, mir war vorallem wichtig das man die einzelnen LEDs nicht sieht. Was ja beim Original nicht wirklich gelungen ist ☺️😜
@Schmooker
3 жыл бұрын
Verlaufst du deine zufällig ? xD
@jansony2670
3 жыл бұрын
@@Schmooker zurzeit noch nicht 😂 😊 werde in 6 monaten ein neues projekt veröffentlichen, vieleicht verkauf ich sie ja dann aus platzmangel 🙃
Any hint what kind of signal splitter he was using?
@jansony2670
3 жыл бұрын
Sorry guys, part two is coming in christmas holiday 😊
Hi, would you sell me the material to assemble it in my house. ????
I was thinking of doing the one with the Arduino and soldering but seeing this, I think I've changed my mind. LED Signal 1 to 2 splitter 3pin - I can only find 4 pin options. I assume this will still work assuming you connect it to the right ports? What app did you use for the color combinations? And where's part 2? :) Just saw your update in the description. Sorry to hear about the problems. Possible APP mystery solved, at least for Android, This app looks like it should work play.google.com/store/apps/details?id=com.spled.pzse I get my lights and adapter, ordered this one. According to the app it should work. www.amazon.ca/ALITOVE-Controller-Control-DC12V-24V-Addressable/dp/B07SG394ND
@icaras12x87
3 жыл бұрын
Thank you so much for putting this out. It helped out a newbie like me !
Dachte part 2 kommt Montag
@dwi2k
3 жыл бұрын
warte auch schon ungeduldig :D
Wann kommt Part 2? 😉
hi bro can u plz reply ... i really like your design .. have some questions .. is the diffuser also printed .. can i use any other diffuser material .. and there are different body designs which oe to use .. plz explain
@jansony2670
3 жыл бұрын
Hey Farrukh the difusor is printed and spray painted with a thin coat of white. You can also use other milky glas materials. At the moment there is only the big orbs pattern. I will be adding more as soon as i can 😊👍
Where can I buy that kind of LED strip?
@jansony2670
4 жыл бұрын
Hey link is in video description 👍
Any news on Part 2 Yet
@jansony2670
3 жыл бұрын
Will upload on christmas Holiday 👍
@sonnenspeedyoffical2830
3 жыл бұрын
What is the maximum of downscaling, because i only have an anycubic i 3 mega
@jansony2670
3 жыл бұрын
@@sonnenspeedyoffical2830 unfortunately downscaling is not possible. The parts will not fit togheter anymore.
I was not getting a good 3D printed nano leaf diy ....and found your video
hey sonyx freue mich auf das part 2 video. Kleine Anregung, eventuell könntest du dich hier inspirieren oder zumindest im video ansprechen, wie man eine alexa integration einbauen kann bzw die ganzen weiteren features wie musik steuerung übern pc usw. man braucht wohl dazu nur den wemos bzw ein ESP8266 mit der software, wie hier beschrieben www.thingiverse.com/thing:3354082 würde mich über ne antwort freuen ob die nanoleafs mit dem wemos und deiner lötfrei technik funktionieren oder ob man auf die steck verbindung zwingend angewiesen ist, wenn man den wemos benutzt. Verstehe leider noch nicht so die Magie dahinter, wie der controller weiß wo ein leaf anfängt und wo einer aufhört.
@jansony2670
3 жыл бұрын
Hey, du kannst jeden WS2812 LED controller anschliessen den du möchtest. Sofern er genügend power für 2x 5meter LEDs hat. Kannst musiksteureung über fix fertige w-lan/Bluetooth controller laufen lassen die auch Alexa unterstützen. Oder über ein DMX interface am PC. Damit die effekte auf den einzelnen panels funktionieren braucht es ein bisschen Mathematik. Und die richtigen einstellungen. Werde ich in den winterferien im part 2 video erklären 👍
For a send I saw 1.76M subs.....YOU THE LIT BRO 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
when are gonna release part 2
hello good video could you tell me how much each triangle measures