Hi how much fumes goes out of this i dont really have a room seperate for a 3d printer so i would like to view options is the fully inclosed space helpful with them?
@enderozata9438 Жыл бұрын
Hello, I'm having a problem. A device with the feature of restarting when the electricity goes out, my tray goes down and when we start it from the same place again, the tray stays down, the device works in vain, how can we solve this?
@re.custom6698 Жыл бұрын
I bought this printer and had to redo a lot of things kzread.info/dash/bejne/oqR82aiMn9y_ftI.html
@chrisfuesler2488 Жыл бұрын
Did that glass bed leave that much of a texture on the parts?
@layoa4275 Жыл бұрын
part 2 its 2022 now boss we need you
@olo2000pm Жыл бұрын
Does the printer have eeprom unlocked?
@adisusanto2766 Жыл бұрын
Mainframe partial metal or pure plastic?
@hasstv9393 Жыл бұрын
The sound quality is too bad
@piechotam2 жыл бұрын
can you share your setting for ABS? I bough CR-ABS but the print is ok as long as it is solid. As soon, as there are gaps it starts to be very "hairy" ;-) Thanks a lot in advance!
@Kotaztrafee Жыл бұрын
Also would like to see the settings.
@bravefastrabbit7702 жыл бұрын
Hey man, thank you for making this vid, as there really aren't any other good ones out there... But it's kinda sad to see you never got around to making the 'next video', is everything alright man?
@stefffpv2 жыл бұрын
Hello is it a problem from printing carbon ore some of the other and then go back to PLA? you have not a problem with clogs ?
@imextradeco.66892 жыл бұрын
This model can be replaced heat bed?
@TimoFeick2 жыл бұрын
You should explain in the video why you did not use the original printbed. I can clearly see you printed on a coated PEI bed. Do not talk about no warping if you don't use the original printbed. 👎
@jansony26702 жыл бұрын
Hey thanks for your comment 🤗 I've used different printbeds and options. As you can clearly see it in the video. A coated PEI bed is offcours my favorite choice. But i also printed all these materials on the stock glas bed with glue,blue tape and Kapton tape. The result is the same , no warping. This video is a quick printer review not a helpguide or tutorial on how to get the best results. So no need to get salty 😋
@simonclaus49372 жыл бұрын
Wann kommt Part 2? 😉
@SweetchuckIPAD22 жыл бұрын
more videos pls!!!!!
@antonsteeghs46232 жыл бұрын
Will part 2 ever release??
@Flaretech.in_2 жыл бұрын
Please tell me which one do you think is better Adventurer 3 or creality cr 200b
@cricketinfo82742 жыл бұрын
wow
@cricketinfo82742 жыл бұрын
Nice
@cricketinfo82742 жыл бұрын
super
@A_K722 жыл бұрын
Yo, great video. Cant wait to see your upgrades for this machine.
@TechnoWit3D2 жыл бұрын
what is body case / frame made of ? metal ?
@jordaanelectronics2 жыл бұрын
How do you change the e-steps ? It is not in the menu. Can you change that ? I want to change the feeder to a better one.
@sergiovogtschmidt81982 жыл бұрын
Hi, great video. I have a question: What is the sotware that you use for control the printer? Do you think that the Matter Control software is useul for this printer? Thanks!
@duongucmanh28572 жыл бұрын
bạn dùng cách gì để tản ánh sáng vậy,cảm ơn bạn
@Th3Yapp2 жыл бұрын
i want a second part
@victoryoung95902 жыл бұрын
would love to see upgrades video
@jansony26702 жыл бұрын
Hey i will release the upgrade video soon 👍
@epicmeeple56352 жыл бұрын
@@jansony2670 do you know the largest size print bed this can be upgraded to?
@iricasper93152 жыл бұрын
Son parçayı prusa da basmış,tabla izinden belli çakal ya😁
@hungtranduy9032 жыл бұрын
can you give me the file?
@CamelActiveTeam3 жыл бұрын
Where is the second part?
@esbenbuckingrasmussen3 жыл бұрын
Great video. I’m in the market for a plug’n play printer and comparing this to the Flashforge Adventurer 3. This has a bigger built size and the range of materials is good.
@cecil52 жыл бұрын
What did you buy in the end?
@josejuanelche3 жыл бұрын
Where are part 2? Are you died?
@abhishekkumar-vy2sl3 жыл бұрын
can we attach laser module with creality CR200B
@kuntakinte33653 жыл бұрын
Will be part2?
@boss402183 жыл бұрын
Thank you for that review! Can you tell me where I can find the model of the oversized nozzle and vase mode layers?
@b.santiago59393 жыл бұрын
you miss one component in www.thingiverse.com/thing:4353656, the P2_BOTTOM END HIGH, because with the P2_TOP HIGH can´t fit with the P2_BOTTOM HIGH or the P2X_BOTTOM HIGH, at the end of the nanoleaf lamp
@danielg99273 жыл бұрын
How noisy is the printer?
@Nickk888SA3 жыл бұрын
Good work but, that's not how the original works bro... Why don't you make it plug and play? Take some LED pins and mount them on the sides, on one side a female connector and on the other 2 sides male connectors, then also mount some cheap small magnets so it will hold it together. When done, you can just plug the panels on other panels like the original one.
@simeonbodurov3 жыл бұрын
What happened with the 5015 fan ? Did it worked ?
@cai8763 жыл бұрын
High, great video. Especially like how you did example prints in many materials. When are you going to release your upgrades video? Could you also please make some Autodesk Kickstarter test pieces to show us. Thanks
@die.dunkel.camper3 жыл бұрын
Wann kommen die nächsten Videos? ;-)
@osaretin83843 жыл бұрын
Hello Mr Sony! Thanks for the wonderful review of the various materials. I am looking to get a printer exclusively for my ABS material prints. Do you build with supports for ABS and does Overhangs work when printing with abs and not using supports.
@augie60293 жыл бұрын
we need part 2 :D
@GraphicdesignforFree3 жыл бұрын
Great video, thanks!
@badhabbit843 жыл бұрын
Would I be able to print on this printer with wood and metal filaments ?
@jansony26703 жыл бұрын
Yes if you change the noozle you will be able to print wood and metal infused filaments 👍
@badhabbit843 жыл бұрын
@@jansony2670 Which nozzle will be the best in this case ?
@Jaden-up3bg3 жыл бұрын
@@badhabbit84 hardened steel, brass wears away in a matter of hours
@poshsincebirth8983 жыл бұрын
i need part 2 :(
@Haverr13 жыл бұрын
When the part 2 is coming out? I wanna do it!
@pravyadav52643 жыл бұрын
you did great , Waiting for part 2
@mdksmiffy3 жыл бұрын
these are without doubt the best LED wall lights i have come across. Thank you for the Thingiverse link, i will be trying to do your work justice in the near future.
@xd98josue2 жыл бұрын
I don't see the link, can you please pass it on to me
Пікірлер
Do you recall what speed you ran on the ASA?
Hi how much fumes goes out of this i dont really have a room seperate for a 3d printer so i would like to view options is the fully inclosed space helpful with them?
Hello, I'm having a problem. A device with the feature of restarting when the electricity goes out, my tray goes down and when we start it from the same place again, the tray stays down, the device works in vain, how can we solve this?
I bought this printer and had to redo a lot of things kzread.info/dash/bejne/oqR82aiMn9y_ftI.html
Did that glass bed leave that much of a texture on the parts?
part 2 its 2022 now boss we need you
Does the printer have eeprom unlocked?
Mainframe partial metal or pure plastic?
The sound quality is too bad
can you share your setting for ABS? I bough CR-ABS but the print is ok as long as it is solid. As soon, as there are gaps it starts to be very "hairy" ;-) Thanks a lot in advance!
Also would like to see the settings.
Hey man, thank you for making this vid, as there really aren't any other good ones out there... But it's kinda sad to see you never got around to making the 'next video', is everything alright man?
Hello is it a problem from printing carbon ore some of the other and then go back to PLA? you have not a problem with clogs ?
This model can be replaced heat bed?
You should explain in the video why you did not use the original printbed. I can clearly see you printed on a coated PEI bed. Do not talk about no warping if you don't use the original printbed. 👎
Hey thanks for your comment 🤗 I've used different printbeds and options. As you can clearly see it in the video. A coated PEI bed is offcours my favorite choice. But i also printed all these materials on the stock glas bed with glue,blue tape and Kapton tape. The result is the same , no warping. This video is a quick printer review not a helpguide or tutorial on how to get the best results. So no need to get salty 😋
Wann kommt Part 2? 😉
more videos pls!!!!!
Will part 2 ever release??
Please tell me which one do you think is better Adventurer 3 or creality cr 200b
wow
Nice
super
Yo, great video. Cant wait to see your upgrades for this machine.
what is body case / frame made of ? metal ?
How do you change the e-steps ? It is not in the menu. Can you change that ? I want to change the feeder to a better one.
Hi, great video. I have a question: What is the sotware that you use for control the printer? Do you think that the Matter Control software is useul for this printer? Thanks!
bạn dùng cách gì để tản ánh sáng vậy,cảm ơn bạn
i want a second part
would love to see upgrades video
Hey i will release the upgrade video soon 👍
@@jansony2670 do you know the largest size print bed this can be upgraded to?
Son parçayı prusa da basmış,tabla izinden belli çakal ya😁
can you give me the file?
Where is the second part?
Great video. I’m in the market for a plug’n play printer and comparing this to the Flashforge Adventurer 3. This has a bigger built size and the range of materials is good.
What did you buy in the end?
Where are part 2? Are you died?
can we attach laser module with creality CR200B
Will be part2?
Thank you for that review! Can you tell me where I can find the model of the oversized nozzle and vase mode layers?
you miss one component in www.thingiverse.com/thing:4353656, the P2_BOTTOM END HIGH, because with the P2_TOP HIGH can´t fit with the P2_BOTTOM HIGH or the P2X_BOTTOM HIGH, at the end of the nanoleaf lamp
How noisy is the printer?
Good work but, that's not how the original works bro... Why don't you make it plug and play? Take some LED pins and mount them on the sides, on one side a female connector and on the other 2 sides male connectors, then also mount some cheap small magnets so it will hold it together. When done, you can just plug the panels on other panels like the original one.
What happened with the 5015 fan ? Did it worked ?
High, great video. Especially like how you did example prints in many materials. When are you going to release your upgrades video? Could you also please make some Autodesk Kickstarter test pieces to show us. Thanks
Wann kommen die nächsten Videos? ;-)
Hello Mr Sony! Thanks for the wonderful review of the various materials. I am looking to get a printer exclusively for my ABS material prints. Do you build with supports for ABS and does Overhangs work when printing with abs and not using supports.
we need part 2 :D
Great video, thanks!
Would I be able to print on this printer with wood and metal filaments ?
Yes if you change the noozle you will be able to print wood and metal infused filaments 👍
@@jansony2670 Which nozzle will be the best in this case ?
@@badhabbit84 hardened steel, brass wears away in a matter of hours
i need part 2 :(
When the part 2 is coming out? I wanna do it!
you did great , Waiting for part 2
these are without doubt the best LED wall lights i have come across. Thank you for the Thingiverse link, i will be trying to do your work justice in the near future.
I don't see the link, can you please pass it on to me