Hey just wanted to say thanks for putting this video together, looking for a bit of a hobby project whilst in lockdown. Think I'll give this a go.

nice nice.. gonna be making now..

Amazing

will you be able to make a video and showing us how to make that power commander unit for Led's? that will be amazing thanks in advance

@smartroadbiker

3 жыл бұрын

That was only a test unit, I have been documenting the build of a new controller kzread.info/dash/bejne/fn6uq9hyg8K7mqg.html is the first video, tomorrow i have a video that will show the circuit and PCB I am designing that could be worth a watch ;)

@ionutz89ful

3 жыл бұрын

@@smartroadbiker it will be great if you'll make it and put some links for us to buy, I did watch that video, for me being such a noob, I didn't got much from it, it is one part where you fast forward, lost it all hahaha, I did really enjoy the previous one with the panels, and till now I was thinking I just want light in it, when I've seen your one, I decided... I want the same as you 🤣

@smartroadbiker

3 жыл бұрын

Glad you at least enjoyed the video! I have had to order 5 of the PCBs so will have extras that I might put up for sale, probably only at cost. Although it would be on the understanding that they are very much the prototypes, so may be errors and problems with them!

@ionutz89ful

3 жыл бұрын

@@smartroadbiker ok, I will try that, sell me one unit ready done, do you have Instagram or any social media so we can chat?

What type of filament did you use for the translucent parts? I have white and regular (natural) white pla but it still gives a yellow shine.

@smartroadbiker

3 жыл бұрын

Thanks for watching! I used a white "silk" PLA. Unfortunately it isn't sold anymore so can't provide a link 😔 I have tried a few different filaments before I stumbled on that one.

@TheJacklwilliams

2 жыл бұрын

Transparent petg works really well as a diffuser.

What is the wall count for the diffusers? And did the diffuser not get blocked by the wirings?

@smartroadbiker

3 жыл бұрын

2 walls and no, it takes a little work to get the wiring to not show a shadow (as I mention in the video :)). Worse case, use some hot glue to secure the wires out of the way.

what filament did you use that does not melt for the soldering ?

Great work.. i woukd like to ask if the diffuser that you used is a 3d printed or an acrylic plastic?

what is the name of the filament using for the white part? thanks

@smartroadbiker

2 жыл бұрын

Unfortunately it isn't sold anymore. It was a white silk PLA though. It had a slight translucent look to it.

I'm really interested in that vise you pulled out. Do you happen to know the thing number for it?

@smartroadbiker

3 жыл бұрын

It has been one of the best 3D printed tools I have found! This is the link to it: www.thingiverse.com/thing:2064269

@jon7804

3 жыл бұрын

@@smartroadbiker thanks!

đèn được ốp lên bởi tấm gì vậy anh

Hello your project is perfect, what you use to to cover led panels

@smartroadbiker

3 жыл бұрын

It's the 3D lens included with the model, the filament is a Silk PLA, but it isn't available anymore 😢

@tomasbartonicek17

3 жыл бұрын

@@smartroadbiker im from czech republic and this filament is in stock i buy one thanks

Hi, initial layer height?

@smartroadbiker

2 жыл бұрын

0.2mm, I think it is the default in prusa slicer 😀

can you take a video about wled settings and upload for esp8266

@smartroadbiker

2 жыл бұрын

Sure can, I can have a look at it over the weekend.

Would’ve been easy to wire up before you stuck led into 3D print housing module ??

@smartroadbiker

3 жыл бұрын

Probably yes! But I also wanted to keep the wires as short as possible and make sure the strips were in the right place as well.

Laurynas Mažeika Have you sanded the surface of nanoleaf diffuser?

@Shin2

2 жыл бұрын

Same question

@smartroadbiker

2 жыл бұрын

Hi Laurynas, no I haven't sanded the surface. I am using a the textured build surface with my Prusa Mk3S though. That said it the diffusion is just from the model being thin enough and that the filament I used is slightly translucent.

The lights you are using look different than Akyelle's. Do you have a link?

@smartroadbiker

3 жыл бұрын

Mine are 60LED/m WS2812 strips. Can't remember where I got them from (brought ages ago and were left sitting in a draw waiting for a project!) but these *look* similar: www.amazon.co.uk/WS2812-Stripe-integrated-WS2811-controller/dp/B00H3IX1NK/ref=sr_1_5?dchild=1&keywords=ws2812+60&qid=1615194512&sr=8-5

@UUnngghh

3 жыл бұрын

@@smartroadbiker Great, thanks! Do you think doing strips of 5 or 6 LEDs would have given better coverage into the corners? and what about 12 volts? would that possibly help with the dimming last panel?

@smartroadbiker

3 жыл бұрын

Sorry just saw your questions! I did think I could have extended the number of leds to 6 per strip, which would increase brightness in the corners. That would come at a higher power consumption though, which is why I stuck to 4. 12v would reduce the effect of the voltage drop meaning more consistent brightness. Although since this video I don't seem to notice the dimming as much, so not sure what is going on!

@UUnngghh

3 жыл бұрын

@@smartroadbiker ok, good to know. I've never worked with electronics this my gaff of blowing out one strip in my attempt to doing a full length, double strip fixture. My next attempt will be following your guide. I may push it to 5 or 6 LEDs and use a 12v power. I'll likely be back to probe your brain!

@smartroadbiker

3 жыл бұрын

Make sure the strip you are using is a 12V strip. If it is a 5V strip applying 12V will kill it!

what are your print settings for white parts, mine are too translucents and i see leds. thanks

@derekwaley411

3 жыл бұрын

same ..

@smartroadbiker

3 жыл бұрын

I am working on a video today about this 😀 Hopefully should be live tomorrow!

Как же бесит что у меня нет триде принтера, все руками надо делать