Head Thrust. Great name for a band 🤙🏼

@CreativeWarrior-

3 жыл бұрын

Yes SIR! I LOVE wacky band names!!!

@25jasoncburger

3 жыл бұрын

And Shake n Bake can be the name of the first album

@arthurmead5341

3 жыл бұрын

Or a sex move

@pulsiui4003

3 жыл бұрын

@@arthurmead5341 I used to do the head thrust back in my pre e.d. days.

@je-2024_1

3 жыл бұрын

\m/ IIII] ; )"" \m/ IIII] ; )'''' ROCK ON

No such thing as too much lube when you want good “head thrust!” 😂🤣😂🤣😂

@whiterook8483

3 жыл бұрын

I was thinking but not saying.

@gfarrell80

3 жыл бұрын

"Just use the proper amount of lube"

@666BIGBLOCK

2 жыл бұрын

Slow your head thrust. Your parts will last longer.

@murkyturkey5238

2 жыл бұрын

I use a gross amount of oil and never had a problem so far

I timed sipping my coffee with Caleb and Steve. I experienced one of the weirdest feelings in my life ever.

@CalebSavant

3 жыл бұрын

That feeling is known as the smyth effect.

I tend to think for most civilians, they aren’t in dusty environments and rarely clean their guns. Thus tending towards overlubrication will better protect the gun without causing malfunctions. I also find wet guns are easier to clean any grime is suspended in the oil and easily wiped away whereas dry guns seem to have the grime more baked in.

@scabcrawler632

3 жыл бұрын

Rural Iowa is dusty as hell. Gravel roads and big equipment

@shawnr771

3 жыл бұрын

Be careful of putting too much into the barrel. There is a potential although minutely small that it will attract enough dirt to cause a barrel blockage. We were warned about it in the Army. After storage always run a patch through the barrel before firing. Especially after long term storage.

@dontneedtoknow5836

3 жыл бұрын

@@shawnr771 the only lubrication of the barrel should be while cleaning with a wire end. If you even put a drop on your swatch you are doing it wrong. Treat it like a cast iron skillet man.

@shawnr771

3 жыл бұрын

@@dontneedtoknow5836 Correct but some people put oil in the barrel and leave it there. It attracts dirt and grime.

I spent 9 years working a private gun range, nearly every gun I ever opened up was bone dry. Many AR’s had never had the pins out

@ratagris21

3 жыл бұрын

Lazy weapons owners. Maybe they read the old AR manual where it was never meant to be cleaned.

@bansteban135

3 жыл бұрын

@@ratagris21 you CAN not clean it if all it is is carbon. But sand/dirt/mud/dust you should clean. But you SHOULD still lube it.

@HelloImKowaBunga

3 жыл бұрын

this makes me feel better knowing I have fired my ar only once but I have broken it down/cleaned it a dozen times. care for your firearms

@ratagris21

3 жыл бұрын

@@HelloImKowaBunga at least you keep it clean and in working order. Others are too lazy to clean it and care for it. I ran into some who purchased a pistol drive AR only because they like cleaning the DI rifle that had. But didn't want to buy an AK. They wanted an AK in an AR just be lazy. Slackers.

@richardlahan7068

2 жыл бұрын

I clean my guns every time I shoot them. Just a habit that I picked up from my dad.

Maybe do a video to demonstrate what would you guys consider the right amount of lubrication?

@eddiemoney9371

3 жыл бұрын

I was sitting here thinking the exact same thing

@KenneMCL

3 жыл бұрын

They have several videos on their channel do a quick search but here's one kzread.info/dash/bejne/aHmpy7ehgK_PlqQ.html

@voltic7133

3 жыл бұрын

kzread.info/dash/bejne/aHmpy7ehgK_PlqQ.html They made this video that is similar you what you're asking about.

@CalebSavant

3 жыл бұрын

We have plenty of them on the channel

@Portuguese-linguica

3 жыл бұрын

Spit in your hand and rub all over you're rifle . That's always the right amount of lube .

clean after use, lube reasonably , check actions, wipe any excess and she will run all day

@rick-kx7gy

3 жыл бұрын

Okay that takes care of the wife now what about the guns ?.

@gunsandcars3648

3 жыл бұрын

@@rick-kx7gy I just waiting for someone for this...finally.

@iamgermane

3 жыл бұрын

Prone to failure anyhow!

@joncampo1627

3 жыл бұрын

I’ve got 30k through one of my BCM’s and I lube it after every one or two uses but only half ass cleaned it 4 or 5 times. Runs like a champ

@iamgermane

3 жыл бұрын

@@joncampo1627 Troops in Afghanistan had their M-4s fail on them in combat.

The worst I've seen from over lubing is that the operator will wear it when it comes out in a gas driven and bolt velocity mist

@shawnr771

3 жыл бұрын

Hot CLP is always good hitting the eyes and face.

@tacticalbaydotorg7816

3 жыл бұрын

@@shawnr771 oh baby

@shawnr771

3 жыл бұрын

@@tacticalbaydotorg7816 Sick puppy.

If you live on the Oregon or Washington coast, you can't have to much oil. Trying to stop rust living in those areas is a constant battle.

@mattfleming86

3 жыл бұрын

Agreed. I'm on the other coast but have my AR daily on the farm. Rain or shine (or snow or dust) I try not to keep it dripping wet, but a "dry" surface will become a corroded surface in no time. Wipe everything off every week or two. Mop out the chamber (hay is JUST thick enough to potentially block battery) and air hose the fcg and empty upper. Takes minutes and I'm ready for another round. I periodically pop a steel target just as a function check and so far have had zero problems. My ONLY issues are going from unloaded to loaded while on a motorized conveyance. Probably need to pick up a single feed mag block or something similar to plug that hole. Remember to dot lube on optic mount screws, handguard/attachment screws, etc. AR's are amazingly ingress-resistant systems.

@MarkiusFox

3 жыл бұрын

Which is why I would seriously consider a stainless steel firearm for high humidity. Or in the case of an AR, insist on a chrome plated BCG and stainless barrel.

@abandonbelief

3 жыл бұрын

@@MarkiusFox all metal even stainless rusts and pitts though

@mattfleming86

3 жыл бұрын

@@MarkiusFox I'm probably going to try chrome or nitride on my next one (pile o misc. parts right now) but I have to admit that because the action is closed, i've never spotted a single speck of rust inside the reciever. I do love stainless barrels though! I don't own a single CL barrel. I really don't mag dump, so even with my LW rifles i'm a believer in accurate deliberate fire, and accurate is easier with better tubes. When I practice I usually stick to drills with lower round counts per rep. A good double tap or two low one high will deal with almost anything. x3 targets is still under 10 rounds. Give it a good cooldown and run it again. I have plenty of fun and never have had a barrel too hot to touch. I'd like to try a nitride barrel. Seems to he a good middleground.

@Lucas12v

3 жыл бұрын

@@abandonbelief true but it corrodes far less easily. Several companies make rifles with stainless and then ceracoat it black or other colors over the stainless. In my experience, those are very rust resistant. Still, oil is your friend of course.

I've actually seen competition shooters spraying lube into AR15 ejection ports between stages.

@ericsmith5919

3 жыл бұрын

That seems to be a common theme. Guys who 'know a lot about guns' say don't over-lube, guys who run the crap out of their guns drown 'em in the stuff. Who to believe? It's up to you to decide.

@tonydeaton2890

3 жыл бұрын

@@ericsmith5919 I believe the pros. I run my AR's well lubed. Same with 1911's and just about everything I shoot.

@gregz4249

Жыл бұрын

I run lightly lubed as I hunt coyotes in very cold weather, had a buddy once over lubed his bolt and firing pin very sticky in the cold

@whiteyfisk9769

Ай бұрын

​@@gregz4249you just wanna lube the carrier rails on the BCG of an AR. Greasing the rest of it doesn't do a thing in regards to lubing the movement of it. Maybe one drop of oil on the firing pin to keep it anticorrosive.

One thing I’d like to see y’all cover is the types of lubrication available, their uses, and the pros/cons of them. Specifically grease, oil, and clp products. Y’all are super informative as always! Thank you for what y’all do!

It’s not necessarily that it will attract dirt/dust. It’s that the lubrication grabs/holds onto whatever dirt and or carbon that comes into contact with it. That said, the additional lubrication will then coat and “neutralize” the dirt and still maintain a low coefficient of friction. So in effect, the abundance of lubrication is able to overcome a certain amount of dirt due to the shear amount of lubrication.

I have seen new AR shooters at the range having problems, then found out that they were "runnin'' her dry like they do in the 'sandbox'". Well, the US isn't a sandbox. I have fixed their rifles by turning the rifle on its side and dropping in a good squirt of CLP. Voila! It is functioning perfectly! Excess lube will just blow out of the ejection port. But no need to overdo it. Do keep the firing pin and firing pin channel wiped dry with a pipe cleaner.

I just took apart my BCG on my 15 night b4 last and I remembered Caleb's previous video on this subject so I'm good ta go!!! Thanks Caleb and Steve!!! 👍👍

Thanks guys great video just bought a brand new Smith & Wesson ar15.

@PuppetMaster1791

3 жыл бұрын

Solid choices with the M&P15. Not the fanciest rifle on the marked but great overall, especially for its price point. We have ran them in our rental fleet for years and they have held up better than most, including some that cost a few hundred dollars more.

@Jennifer_Prentice

3 жыл бұрын

I had some minor issues with mine but after tearing it down , Facing off the upper and putting all new goodies on its a great gun :). Most of those are very basic and come with the plastic hand guard and stuff. I found it was a good starting point to build a great AR. You can take your time doing the upgrades and the gun is still all together so you can still shoot it while doing upgrades .

@StrideResearch

3 жыл бұрын

Now you need a light and a sling! Check out StreamLight HLX for a light and Vickers tactical sling!!

@abandonbelief

3 жыл бұрын

All I have is a gun vise ordered today ... plans to build my own since waiting lists for parts exercising my patience like Arnold

@animalmother5902

3 жыл бұрын

Get a new handguard for it the factory one has no heat shield

You guys are always such a good watch. One of my favorite channels!

The US Army in the 70s said, "Wet not white" on the bolt and carrier. Not so much on the buffer and internals. Some Drill Sergeants took it to extremes. Geoff Who has been around awhile.

But what if Caleb gets too much lube in his hair? Will that make heads thrust?

@rick-kx7gy

3 жыл бұрын

He's got that covered . The sideburns wick off the excess .

@badmoon7549

3 жыл бұрын

@@rick-kx7gy now that's funny. Caleb is a good guy to put up with so many comments on his hair.

@rick-kx7gy

3 жыл бұрын

@@badmoon7549 he's a big boy and knows he's appreciated . and offers really good info . same with Steve . And Brownells is half of number one with Midway USA .

@annverleedowns311

3 жыл бұрын

Oh I thought it was a plastic taupe like on a Lego person the grandkids play with

@colby7625

3 жыл бұрын

Had to have learned it from an old timer.

My Gov't issued M16A1 which was prone to malfunctions in the upper needed graphite to take up the space between parts keeping the parts from slapping around. I would clean everything normally except the upper which required nothing more than a quick slosh in the cleaning solvent barrel and more graphite added after drying. My consistent 40/40 on the popup range was proof to others how to avoid the notorious jams of the A1. Once the A1 was retired and the uppers were made to order instead of using drop in parts the jam issues went away. I know this was a bit off topic but your awesome video brought it to mind. Have a great day!

Ahhh, that synchronized sip at the end. 👌🏻

So as with so much in firearms and life, moderation in all things.

They talked about “too much head thrust from using too much lube” without even smirking.

@AndyCigars

3 жыл бұрын

Iron wills on these guys...no doubt at all.

Great content! Thank you.

I wanna be put down in the history books as that one guy who dunked an AR-15 in a drum of lube. Problem is I don't own nearly enough lube.

@abandonbelief

3 жыл бұрын

Thats what she said Buahha ha

@Pyreleaf

3 жыл бұрын

Just pick some up at the next family reunion.

@jakegarrett8109

3 жыл бұрын

I thought that was normal procedure (it's a good method for any metal that needs major cleaning, like engine/trans parts and let it soak for a couple days to loosen any rust or grime). I've heard many people did that for storage in 55 gallon oil drums, at least back in the day it was common practice and I've done it with pellet and BB guns that had some surface rust and it helped letting them soak before giving them a good scrubbing and clean up, so it should work the same for real firearms.

@onpsxmember

3 жыл бұрын

It's been done, so jut watch it here on youtube. Larry Vickers did that to prove a point.

lol you guys always bring back fond memories of sitting with my grandpa and talking guns

Probably worth mentioning that excessive lube in the chamber of bolt face can cause dangerous pressure spikes in a tight chamber. Storing an over lubed firearm, loaded and muzzle down is asking for trouble. Lube in the bore isn't a great idea either, unless you absolutely need it to keep corrosion out.

@PetuniaIii-pd1ww

2 жыл бұрын

Never considered that but i can see the point...we run an oily patch and a dry patch usually and I will have to think about this...

@bonjovi2757

7 ай бұрын

Not doubting what you say at all, but I always store my guns muzzle down with wet chambers. Haven't had a problem yet. Maybe I've just been lucky for 10+ years. I don't know.

Just use CLP. In the military, ppl would lube the hell out of the weapons. They wanted to go home after shooting as quickly as possible so they hosed it down. The only warning CATM would give is DON’T use CLP on the gas rings. Oh, and ONE DROP for the firing pin, ONE DROP for the extractor on the head of the bolt after assembly, then wipe it. Other than that, the only thing they said upon inspection was, “wipe off the excess, I don’t want oily hands “, if you cleaned it enough.

Great content.

Info about not oiling the rear of the bolt in the bolt carrier group is very important info I've never heard before. I had no clue it was supposed to be dry behind the orings tbh.

@CaptainCiph3r

3 жыл бұрын

It's not true. It doesn't matter. Lube will work its way in there from the bolt stem. The statement about not oiling the gas rings is an old myth. Any lubricant there will be burned off. It will cause literally no issues. The fear is it will cause the gun to cycle faster or something bullshit like that, but time and again it has been proven that the gun doesn't even need gas rings to run reliably, lube isn't going to hurt them.

Thanks for the info.

Thank you guys! I appreciate the content! Now I know the term “head thrust” 😎

If its not leaking from the pins it needs more. The gun will get rid of what it doesn't need. Gun will run full of sand, won't run dry. The comment on not getting it on the gas rings is wrong. One of the main points that needs lots of lubrication in the bolt is the cam pin path and cam pin itself, lubricant put in this cutout will work its way onto the gas rings. This doesn't hurt anything, it's a myth just like the "if you take out the gas rings your gun will blow up" crap. Just not true, lube will get in there and very quickly burn off. I suggest referring to SOTARs video on lubrication for the BCG. As for attracting dirt, ANY lubrication attracts dirt. What many people have found out running guns in the sandbox, is that if you use enough lube the grit and dirt becomes neutralized by the lubricant. If you don't use enough it binds things up. If you wanna experiment, put a drop of soap on your hand after grabbing a handful of dry sand, rub your hands together. Note how it grinds in your hand and causes friction. Now pour a little more and repeat until the sand is floating around in the soap and your hands glide across each other smoothly. As for firing pins, firing pins should be dry. At the most it should be lubricated by whatever seeps in around the bolt, and should be taken out periodically and wiped clean. Never lubricate the bolt face ALWAYS lubricate the locking lugs Lightly oil the extractor at the rear near the pin Never lubricate the extractor claw. Front gas ring on the bolt stem should be lubed. Rear gas rings don't matter either way, they will get lubed whether you intend it or not. Bolt tail behind the gas rings should be lubed unless you like scraping carbon all the time. Bolt stem should be lubed fairly heavily. Cam pin and the path it rides in is the most violent and overworked part of the entire gun, and should be near packed with lubricant, push the bolt head forward, fill the chamber the pin sits in, push it back, fill the front side of the chamber. Bolt rails are the only thing external on the carrier that needs to be lubed, but general rule is just put a little on your hand and get it all over the front of the carrier from the edge where the bolt protrudes, to the rear where the rails end. Do not lubricate the bolt carrier tail, not because it will hurt something, but because it is a waste of lubricant, that part does not touch anything and does not produce friction worth noting, lube there is just wasted. A drop on the hammer face, a drop into the disconnector and sear, and a drop onto the safety, as well as one drop occasionally into the takedown pins. Remove buffer and spring and essentially dry your hands with it. Whatever lube is left over from the BCG just run it down the spring and buffer. Failing that, just one or two drops to the palm of a gloved hand, massage it in. Not totally necessary but it cuts down on noise and doesn't effect reliability adversely. Following these steps I've gotten guns to run for months on one lubrication, with more than ten thousand rounds in between cleaning of mixed supressor and non suppressed fire on some guns.

Good point you made about lubricating inside the bolt. I'm in Alberta Canada and a couple of days before a cold hunt I spray Remington Action Cleaner in the bolt to clean it out. Brake cleaner would work also. Last thing I want hunting during a cold day is for the parts inside the bolt to freeze and seize. Click and no bang means good meat runs away.

9.5 out of ten both for the content and synchronized coffee sip.

Great video guys. Please do a video on proper lubrication, and be sure to demonstrate where to lube and where NOT to lube the AR-15. Thanks!

@CalebSavant

3 жыл бұрын

We have several! Check out our other playlist.

Thanks guys!

Good video. Have to learn more about head thrust

I have used oil on every gun I have ever owned and will continue to do so. I have NEVER had a problem in 50 years. I use very little grease but many people would say that I over lubricate my firearms. I don't care what others say, I will continue to oil my firearms. I keep my vehicles, boats, guns, and machinery ( and even my Wife ) well lubricated and clean and they ALL have lasted me a lifetime.

There was almost always that one person in the Army that was working range detail and demanded everyone entering the range get a couple squirts of CLP from a spray bottle. Only because someone before them had done it without understanding the consequences. Monkey see, monkey do. Those were always the worst days on the range for malfunctions.

Love these videos. Keep it up!

thank you again

I over lubricated a Marlin Papoose which was my first gun. Not knowing any better, i would spray lubricant into the action which deteriorated the bolt buffer to the point it cracked. Many years later I still have that Papoose with a new buffer and it is clean and dry now. I keep only the lightest film of oil on the side plate assembly, applied with a q-tip, and leave the buffer dry. I have gotten away from aerosol lubricants applied directly to things. A drop of oil on a q-tip or patch. I use aerosol on a rag and use the rag to wipe the outside of receivers and barrels. Less is more.

@BrassCatcher

3 жыл бұрын

Only time i aerosol is when I’ll be blowing off access

I want to know Caleb's secret to such perfect hair

@dbelex

3 жыл бұрын

WD 40

@paolodeep8459

3 жыл бұрын

Just the right amount of lubrication.

@badmoon7549

3 жыл бұрын

The right amount of lube makes heads thrust.

I jumped in at the deep end when I built my first rifle (milled the receiver, installed barrel, etc {didn't just put an upper on}) and to top that off, it was a .308 build. For the first ~300 rounds through it, I had to lube the snot out of it to the point there would be an oil puddle on the bench after shooting a few rounds just get the rifle to cycle reliably. There was never any signs of burrs or abnormal wear and I had an adjustable gas block to ensure I wasn't over/under gassing it. Anyways, after that ~300 or so rounds and what seems liked buckets of lube, the rifle now runs flawlessly with what most would consider a typical amount of lube.

The over lubrication idea has always made me chuckle. A gun is a simplified machine. Some think guns can be over lubricated yet they pour a minimum of a gallon of oil in their vehicles engine for an oil change. Sewing machines are heavily lubricated, some even have oil sumps like an engine does. The point is machines have to be lubricated. I've shot some M16's and M60's in the Army that ran better (read that as reliably) when lubricant was coming out of them as they were being fired. I also enjoyed Larry Vickers engine oil demonstration as it does drive the point home. As for the carbonization of the lubricant just use a very high flash point lubricant. I personally use G96 on all of my AR's for many reasons including that one.

My rules for firearm lubrication are simple. 1) keep lube out of the chamber, bore and also off the ammo and magazines. Getting lube on any of those can cause too high pressures. 2) on AR direct impingement rifles, keep the entire bolt carrier group wet and use one of the modern synthetic CLP lubes that do not burn off during heat...SLIP2000EWL or full synthetic motor oil are good for the bolt carrier group. 3) For the exterior of the rifle use a light oil that does not attract dirt, leaves and grit if I have to get down on the ground...BF CLP. 4) I don't go by what soldiers and Marines claimed worked good as a firearms lube over in the middle east because that's a totally different kind of climate and terrain than where I live in the southeast USA. The middle east is super low humidity and lots of sand and in some areas, fine talcum powder like dust. Where I'm at my climate and terrain are high humidity, rain, hot and humid in the summer and cold and wet in the winter. And there is no sand or fine dust where I live. So individualize your weapons lube for your particular geography and climate.

Slip 2000 EWL, lube and wipe off excess. I've yet to have a lubrication malfunction in any firearm using their products.

@TylerLL2112

3 жыл бұрын

I use EWL 30. Amazing stuff.

There isn’t one video where i don’t learn at least one two things I didn’t expect to learn from the video. There is always so much extra, and vital info that is shared here. This is one of my favorite KZread gun channels over time. Great content as always.

Nothing quite like a foursome of well lubed Browning M2 HB with 10,000 rounds to use up before the range closes. Loved my time teaching Cav Scouts as a reservist.

I know after almost 3k rounds and two squirts of CLP each day at the range. An m16a2 does not malfunction because of this.

You guys may have just solved a mystery I had a few months back. I dialed in the gas settings on my lr308 for a hand load and put the rifle away. Came back about a year later and couldn’t get it to cycle that same load without changing the gas setting. I’m betting I had it running while everything was wet and the lube dried out / ran out overtime causing more friction.

@jasonlopez4855

2 жыл бұрын

My LR-308 bolt will not run dry has to be wet at all times to work. I put a 243win barrel on it even worst the bolt doesn't feeding rounds in or out. Getting better. DPMS keep it wet.👍🏽 I really like my rifle in 234w or 308w

@colsoncustoms8994

2 жыл бұрын

@@jasonlopez4855 wetter is better 👍👍👍

Hey Guys! Thank you for the video! I lucricate my AR rather on the "wet" side. Any too much lube is going to be shaken off after the first few shots anyway. But as you said: The DI system relays on good lubrication. In this subject i have a mith for you: It is i comon fact that you should store your rifle with a small layer of oil in the barral to prevent corrosion. I have heard, that if you are hunter, and the first shot you take counts, you need to de-lube the barrel before shooting, because the oil in the barrel will interact with your accuracy in a bad way. Please cover that :) BR from Austria from the beautiful Alps :) (PS: English is not my first language, but i hope you got the point)

@tightwad

2 жыл бұрын

Your English is better than most Americans

You need a Hi Point sticker on the door of that gun safe !

I am a solid opponent of heavy lubing. Grease has no use in firearms, only light oil such as plain old mineral oil is needed and if you can see drops or running oil trailing, then it is too much. Just put a drop in friction areas and wipe it off. If oil finds its way into the chamber it can defeat the process of brass forming to seal with the chamber, can wreck your gun, and can even hurt you. I have seen people at the range spraying a fine mist out of their AR-15s. That's ridiculous and quite honestly it's dangerous.. I lube my firearms like this, cycle thousands of rounds, and have no issues with wear on my guns whatsoever. And I like it I guess with the silicone flannel rag to protect the exterior.

When all else fails READ THE DIRECTIONS !!!

@looseballs1966

3 жыл бұрын

DIRECTIONS?,,,,, WE DON"T NEED NO STINKING DIECTIONS!!!!!!,,,,LOL.

I was taught "AR-15s like to run wet." It was stated that if it's not spitting a little oil at first, it's not wet enough. I've seen few problems with actual lubrication though. The malfunctions I've seen with these rifles have usually been either a bad round or some other mechanical defect. At any rate, it never hurts to bring an extra rifle or spare parts. Doing classes, there's usually going to be at least one person whose rifle goes down during the day.

Not a big fan of the Rand or the newer CLP. They both work great if you use the firearm frequently. But if you let them sit for a long period.....the rand tuns to a super thick and sticky mess. The newer CLP gets crusty after setting. Old school Rem oil hasnt failed me yet.

Jus a little dab of it / spray does enough to work for a long while of a time. Excellent video. You two are great team together. Always good knowledge of Firearms. Love watching the channel because of You two. Thank You and God bless Y'all and America 🇺🇲➕🇺🇲

I use Lucas Gun Oil for springs and hammer and trigger pivot points, Shooters Choice grease for slide rails, and bolt lugs, and Chip McCormick Trigger Job grease for hammers sears for a long time. Lucas Gun Oil is great on reciprocating parts such AR BCG, because it’s just thick enough to not shed off when the bolt is cycling, and will keep carbon fouling from building up. Shooters Choice grease is good on slide rails again because it won’t shed when a slide is cycling, and bolt lugs for the same reason. Chip McCormick Trigger Job grease on a hammer/sear notch will help smooth and reduce trigger pull. In one of my pistols, it reduces the pull weight by 10 ounces and eliminates the sear creep. But still these lubricants needs to be cleaned off periodically along with any carbon build up and re-lubricated. A well and properly lubricated firearm is a happy firearm.

Remarkable restraint in not reminding any Elmer Fudds out there to not pack lube down your guns bore . Or allow dawn wabbits to shove carrots down them either .

@elmerfudd7674

3 жыл бұрын

ssssshhhhhh be vewy vewy quiet

Correct information

Have 100% had an AR malfunction because of excessive oil that leaked into the firing pin. Gun was clean (pristine) so the issue wasn’t fouling, the oil caused the firing pin to not strike the primer hard enough. Took racking and light striking 4 rounds before it fired normally.

TW 25 B I have been using for decades and all it takes is a very small amount. Used to mix TW25B with alcohol and spray it on feed pawls of belt fed weapons or weapons that might see time underwater. A wonderful product but like any lube never over lube.

T-6 shell rotella 5w40 diesel oil works in all my guns winter and summer and it also works in my classic cars!

Remember at the range when in the Army, sprayed a tad or too much of CLP on bolt group right before qualifications. First shot got sprayed in dominant eye with high pressurize CLP. Blurred vision for remainder of shooting qualification. Didn't do my best shooting that day, just saying. Still wish I could see much less hit a target at 300 yards with iron sights. Y'all have a good day now.

There is always time for lubrication!

@AndyCigars

3 жыл бұрын

Evolution! Great flick! 👍🏻

I Always Use More Lubrication Than Recommend For ALL Of My Guns And I've NEVER Had A Malfunction.

@michaels.9894

3 жыл бұрын

if you've never had a malf then you aren't shooting enough

@ChristianConstitutionalist3192

3 жыл бұрын

If Someone Has A Malfunction Normally It's Because They Don't Take Care Of Their Guns, Or Their Gun Is Just A POS (Like The Sccy CPX-2).

@squidy4082

2 жыл бұрын

@@michaels.9894 you can shoot a BCM dry out of the box and shoot 7k rounds without an malfunction

@michaels.9894

2 жыл бұрын

@@squidy4082 Ammunition related malfunctions are a thing, regardless of how good your rifle is. Train for it. If someone says they’ve never encountered one, it is simply because they haven’t shot enough.

3:16 That's what she said! OMG hahahahaha

Ordered two pistol mags and went to the outdoor range. It was windy and dirty and dust were getting everywhere. I had a couple of miss feeds and thought my gun was malfunctioning. When I went home and cleaned everything I saw that the two new mags had a lot of lube and seized up with all the dirt.

I use a tooth brush put some oil on it and it seems to brush on the right amount.

That "AR-15" could use a retro brn-180 buttstock

@CalebSavant

3 жыл бұрын

I agree.... every dang time you comment about it... I agree totally lol

Rather than taking the gun all apart to lubricate it, drill and tap for grease zerk installation. A few pumps from a grease gun and you're good to go.

Caleb can lubricate a small army of AR's with the "lube" in his hair.

Frog lube gummed up my AR15 causing light primer strikes. Removed the Frog lube and re-lubed with Slip 2000, problem solved.

My wife walked in while you were talking about over lubrication and headed for Rust she thinks I’m watching porn.🤫

This segment wasn’t as “cut and dry” as I expected. Lots of good points. But for those of us that have been shooting for years but are new to ARs, one piece of advice we hear is to “run it wet”. I haven’t had a chance to shoot my new AR yet, and I’m certain I don’t have mine *too* wet but I was thinking maybe it could be wetter. I definitely don’t pack grease in the firing pin/bolt head, but where is the fine line? Normally I’d just go out and shoot to figure it out but with ammo costing as much as it does I’d rather not use all my ammo trouble shooting my new tool. Any pointers, anyone?

@CalebSavant

3 жыл бұрын

Check out our videos on proper lubrication, that should take care of any questions in that regard.

@shawnr771

3 жыл бұрын

I used to wipe M16s with an lightly oiled rag. Just enough to see a sheen. They run just fine. If the rifle has too much hot oil coming out of the ejection port can hit you in the face. Then you will know you got too much.

I've seen a Remington Model 700 seize up in -10F temperatures simply because the owner wiped too heavy of a film of oil on the bolt.

M16A1 was so loaded with CLP it would blast a mist cloud of lub with the first shot. 9-1/2 years and never a single failure. Nothing like a triangle handguard rifle.

Dirty and dry or dirty and wet? I hear it both ways. Lightly oil or heavily oiled doesn't seem to matter until it gets cold, then it is which lube more than quantity. I lightly oil those areas that contact each other. If you lightly oil you may want to add a little oil after you run 200 rounds through. But after cleaning no matter what I lightly oil for storage reasons.

Running guns dry serms to be a "thing" now. Like lubrication somehow causes guns to "lock up" and guys brag about not using a drop of oil to make their guns more reliable. This seems to be especially true among owners of Soviet designed weapons like SKS rifles.

I’m sorry. I know it’s sophomoric, but I giggled @1:20...over lubing causes more head thrust.

The problem with KZread is that too many people have done videos on lubricating your AR-15, and the amount ranges from dripping wet, to borderline dry. In the Corps, we used CLP to clean it and LSA to lube it, and looking at it when finished, they looked wet, but far from dripping lube. I have tried many lubes on mine, and find that minimal lube works just fine. Maybe do a video on the proper lubrication of the AR-15 platform.

I'd also like to add that if you use too much lube or the wrong kind it can start squirting out and making a mess while firing

Steve hope you didn't pay that barber.

It’s not necessarily that it will attract dirt/dust. It’s that the lubrication grabs/holds onto whatever dirt and or carbon that comes into contact with it. That said, the additional lubrication will then coat and “neutralize” the dirt and still maintain a low coefficient of friction. So in effect, the abundance of lubrication is able to overcome a certain amount of dirt due to the shear amount of lubrication.

Sometimes overlubricating gets my bolt jammed in the lugs.

Just two grown men discussing lube.

I've asked this question on your channel more than once. Which lubricant is better petroleum based or silicone based? Petroleum seems to attract more dirt and carbon fowling and is harder to remove while silicone tends to repel dirt and carbon fowling wipes away almost effortlessly. Any thoughts?

First time iv heard not to lube the spot behind the gas rings

I would say yes. Now I'll watch the video.

Love me some head thrust!

dear sirs after storing a lubricated rifle for some time should you run a dry patch through the barrell before using it again

Made the mistake one time of using paper shredder lubricant in the bolt of a 20 guage shotgun. It hummed up the bolt so bad the firing pin stuck. Had to completely stripe the pump completely and clean with carburetor cleaner. Never use sherrder machine oil in your fire arm.

Can you recommend a good way to dry the chamber before shooting? A bore snake don’t do it very well. Some guys says … use toilet paper wrapped around a chamber brush to wipe it out. But I think there will be remain a thin layer of oil in the chamber anyway. And I don’t know if this can be a problem. What do you think?

Knowing this is dumb myth I still stayed for the whole video because I knew I would learn something new and I certainly did

Anyone else catch the Mil-comm reference... I use it on everything.

I used to clean my M16 in the sink at basic training and then lube the shit out of it and it was the only one that never malfunctioned but that was a different situation with an old worn out rifle

I've heard of oil getting inside the ammo and causing it not to fire. I've never actually seen it happen though.

I use bacon grease. Nothing smells quite as good.

It sounds like the potential problems that they describe are not related to over lubrication so much as lubricating areas of the gun which should not be lubricated, such as the chamber and the firing pin channel.