Sliding Screen Door Track Rail Replacement (Complete Guide)
Тәжірибелік нұсқаулар және стиль
Tools:
• Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
• Saw:
* Multi-Tool - amzn.to/32cbrLw
* Handsaw - amzn.to/3uX4tXj
• Philips Screwdriver - amzn.to/3uEshz0
• Flat Head Screwdriver - amzn.to/3uCceS8
• Shop Towels - amzn.to/3taa5wC
• Cleaning bottle (water & soap works great)
• Painters Tape - amzn.to/32cJint
• Sharpie - amzn.to/32gxjpe
• Tape Measurer - amzn.to/3dfW8rE
• Gloves - amzn.to/3t866kr
• Spline Tool - amzn.to/3wUYJPw
• Spline - amzn.to/3wVWVFX
• Razor Blade - amzn.to/3d74l15
This video works on all makes and models of screen doors. Make sure to measure properly before working to ensure it will fit properly.
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #screendoor #trackrail
Пікірлер: 59
Tools: • Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB • Saw: * Multi-Tool - amzn.to/32cbrLw * Handsaw - amzn.to/3uX4tXj • Philips Screwdriver - amzn.to/3uEshz0 • Flat Head Screwdriver - amzn.to/3uCceS8 • Shop Towels - amzn.to/3taa5wC • Cleaning bottle (water & soap works great) • Painters Tape - amzn.to/32cJint • Sharpie - amzn.to/32gxjpe • Tape Measurer - amzn.to/3dfW8rE • Gloves - amzn.to/3t866kr • Spline Tool - amzn.to/3wUYJPw • Spline - amzn.to/3wVWVFX • Razor Blade - amzn.to/3d74l15 This video works on all makes and models of screen doors. Make sure to measure properly before working to ensure it will fit properly. Check out my website at mcfixit.us Disclaimer: Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT. #mcfixit #screendoor #trackrail
@no_I_dont_my_real_name_on_yt
Жыл бұрын
The aluminum rail isn’t available on amazon anymore with that link. Do you know anywhere else it can be bought?
It’s sad you couldn’t find one with an exact fit but you did a good improvisation with the spline! Great instructions all the way though!
@MCFIXIT
3 жыл бұрын
Yes, they do sell some online but at a very very high price. The one I got was great and priced well. Here’s a link: Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
Very clear instructions. Exactly what I’m looking for. Good content!
@MCFIXIT
2 жыл бұрын
Glad you enjoyed it! Thank you for watching and commenting!
Thanks for all the details and being so thorough.
@MCFIXIT
Жыл бұрын
Thank you very much!
Really appreciate for this video. It is very helpful, and I am able to resolve my problem now. Thanks a lot!
@MCFIXIT
10 ай бұрын
You are welcome. Best of luck on your project
That aluminum one should last a lot longer than the plastic one!
@MCFIXIT
3 жыл бұрын
Yes, I agree!
Very helpful!
@MCFIXIT
2 жыл бұрын
Glad it was helpful! Thanks for watching and commenting!
It’s crazy how hard it is to get out when you’re trying, but they fall out like nothing when walked through
@MCFIXIT
2 жыл бұрын
So true... or just fall off the track when opening!
Thanks for sharing .
@MCFIXIT
Жыл бұрын
Thanks for watching!
Great job 0:15
@MCFIXIT
2 ай бұрын
Thanks so much!
Great instructional video...Thank you! Just a heads-up, your link for the Replacement Aluminum Rail/Track is not working.
@MCFIXIT
Ай бұрын
Thanks so much for commenting. That part comes and goes in stock. I have not been able to find a similar one to it. Have you had any luck on finding a comparable replacement part?
What is the purpose for the spline? Is that something that would be needed for each replacement?
@MCFIXIT
Ай бұрын
There is a very small gap that needs to be filled with the new rail. So this is what I placed in that gap for a snug fit
Just here to fit the screen that came out from my balcony door. Followed the step you told but doesn't work I am afraid. Must be the top runners/wheels. Will try again
Great video! Did you replace wheels? If not may replacing wheels would make it smoother.
@MCFIXIT
3 жыл бұрын
No I did not, the wheels were still in good shape. My primary problem was the vinyl track being busted. Wheels might other others if they are very worn or damaged,
Part not available anymore 😢
@MCFIXIT
11 ай бұрын
That’s not good. I’ll have to try to find a replacement. If you find one, be sure to add it to this comment thread
you know if you wrapped the flat head screwdriver w that paper towel like one wrap around d you could get the corners ends better. works for me ; )
@MCFIXIT
Жыл бұрын
Great tip! Thanks for sharing this!!!
@MojoCon2
Жыл бұрын
@@MCFIXIT you are most welcome
I don't have a channel for mine to go into (adding a screen where there currently isn't one). Can you glue the track down (and up...need one for the top too!)?
@MCFIXIT
2 жыл бұрын
You would need to secure the track. You might be able to glue it and clamp it but it would be better if you find a way to screw it in. What is the base & top of the door made out of?
❤❤❤❤❤
@MCFIXIT
8 ай бұрын
Thanks!!!
Seems you can't buy these aluminum rail tracks anymore. Your amazon link is no longer there. Where else can I get one? The Arizona heat destroys the vinyl ones,
@MCFIXIT
18 күн бұрын
Thanks for the heads up. I'll try to pull some old info on where i bought it. Maybe they are still in business but not selling on Amazon any longer
@MCFIXIT
18 күн бұрын
Here's the only info I have on it... Brand: CRL Model: Satin Anodized Aluminum Single Bottom Rail - D601A I was able to pull this from my records.
@MCFIXIT
18 күн бұрын
After a quick search, I found this online: www.dkhardware.com/satin-anodized-aluminum-single-bottom-rail-d601a-product-8744.html?gad_source=1&gclid=CjwKCAjw1K-zBhBIEiwAWeCOF3FQRTZxLM-nj0jYCOIZHxkEur6uF1OFx5WlU5GU9r0Of40W-W6fyxoC3HEQAvD_BwE. I can't guarantee it will be the same, so you might want to call the company and ask questions about it
My vinyl frame is chipped on the very outside part of the runner, like where someone might hit their toe if they were stepping inside, from the outside. Do you have any tips or advice? I can't afford to replace the entire frame and door
@MCFIXIT
Жыл бұрын
Find out the manufacturer and call to see if you can get a replacement part for that. Otherwise it’s not looking good except for replacing it
When i started this project, i expected the vinyl track to cost like $10. Boy was I wrong. I don't understand why they are so expensive. Nice video btw.
@MCFIXIT
Жыл бұрын
Yes, I thought the same thing. That’s why I went with a metal one. It’s still working great! Best of luck on your project!
Is it still sliding well? Any issues going with a metal over vinyl runner?
@MCFIXIT
2 жыл бұрын
Yes it is! No issues, it seems more sturdy actually than the vinyl original part.
Ours is bent at the top track. Does that one come off too or do I need to replace the entire frame?
@MCFIXIT
Жыл бұрын
You will need to look at yours to determine that. Some do and others don’t. It’s less likely than the bottom strip. You should be able to put a pick or screw driver into a slot and pry up (carefully). That should help determine if the upper comes out. Mine does not.
@yogawithcaro6011
Жыл бұрын
@@MCFIXIT I am trying to get the top rail to stay up in the top track. How do I attach my top track to the frame? Thank you!!
Where did you get the replacement part?
@MCFIXIT
3 жыл бұрын
Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB They will call or email you asking for the size you want yours cut. Great customer service. I am not sponsored by the seller.
I bought a new screen door and it is loose at the top and tight at the bottom. Should I add a rail to the top? Wish thier were guides I could screw in at the top
@MCFIXIT
7 ай бұрын
I'd adjust the bottom and top screws to create a tighter fit on the door.
Why do they make those with cheap plastic instead of metal?
@MCFIXIT
3 жыл бұрын
Great question. I'm sure some manufactures make them with better construction that a plastic.
I think this is what is wrong with mine!
@MCFIXIT
3 жыл бұрын
It's a common thing to have happen over time!
That channel is discontinued
@MCFIXIT
Жыл бұрын
That stinks! Mine is still going strong. Let me know if you find another option out there!