Thank you for the video ..saved me a trip to the mechanic and saved me $$$$..too. It worked 100% on my 225 ocean runner...took the old ones to NAPA and found me alternatives.... Keep the usefully videos flowing...regards and God bless....

To get motor to move where you need it to in "emergency", I believe you can swap the solenoids to get the motor to trim up or down (assuming 1 of your 2 solenoids is good).

Thank you. I have an Evinrude 175 and this vid fixed my problem!!

It just happened to me today I guess thanks to you I don't have to pay a mechanic

Thanks for this video. I have a old 125 tracker by mercury and this was my fix! You saved me some money with this quick $20 part swap and now I have trim again!

@cwulfoutdoors318

2 жыл бұрын

Very cool, happy it worked for ya!

@paulriendeau1971

Жыл бұрын

Where did you get the solenoid? I have the same problem

@b1riot

Жыл бұрын

@@paulriendeau1971 a local boat shop that handled Mercs

Thanks I’m going to give this a try

Thank you 125 Murc same thing happened to me

Happening to my 225 vindicator. Go up to far it won’t come back down besides relief valve. Think fluid is low for now. But thinking to do your trick anyways

Hello! I have problems too with my downtrim...the uptrim works good,down doesn't nd when I push down I can't here any click apart from the click from the button...it could be the same problem u had? Thank u nd greetings from Romania, Europe!!!

@cwulfoutdoors318

2 жыл бұрын

Thanks and I wish you much luck. Could be a few things, starting from the simplest first. Relay, relay harness, wiring, or trim motor.

@florintancu9352

2 жыл бұрын

@@cwulfoutdoors318 thank u for responding me so fast...I would say it s a relay coz it s working good uptrimming...I will try tomorrow nd I will let here a respons for the others which have the same issue!!! Stay blessed!!!

@cwulfoutdoors318

2 жыл бұрын

You too, and thanks for contributing to the discussion

@angelpopoca4038

11 ай бұрын

I can hear my tilt motor wend I push up or down but it won’t move

My trim goes up and down from the throttle but only goes up from the motor. Any idea as to why it won’t go down from the motor?

@MG956_

Ай бұрын

Mine is the other way around? Motor trim works up and down but throttle trim only works up? Any ideas?

When I press the trim button all I hear is it clicking in the rely did yours click

@cwulfoutdoors318

2 жыл бұрын

Yes that’s exactly what it was doing

Mine doesn’t work on the throttle

I don't have any working trim the motor doesn't buzz at all the trim is dead what may it be I'm new boat guy? Hope you can comment give me an idea on what it might b

@cwulfoutdoors318

2 жыл бұрын

Easy fix might be a bad connection to the battery, or a switch. If theirs two switches then it’s not that. Could possibly be the power trim motor.

@randylee6823

2 жыл бұрын

Tk you cwulf

@richshadwell5561

2 жыл бұрын

Thats not a solinoid, its a Relay

@cwulfoutdoors318

2 жыл бұрын

@@richshadwell5561 yeah that’s what the guy told me it was a solenoid but after researching it I found out it was a relay. Link is in the description. Thanks for the reply.

@richshadwell5561

2 жыл бұрын

@@cwulfoutdoors318 I switched the relays around and it does the same thing so evidently its not a relay !

How do you test them?

@cwulfoutdoors318

Жыл бұрын

I just troubleshoot them by swapping them with one that I know works and the switch works as well. Also will use both the switch on my controller and the one on the outboard itself. Mainly just trial and error but I’m sure there’s probably other ways that more electronically inclined people know.

Mine is doing the opposite....goes down but not up

@cwulfoutdoors318

Жыл бұрын

Try swapping them out

Both mine are “clicking” but won’t raise or lower

@cwulfoutdoors318

Жыл бұрын

Might be a wiring issue and not a relay issue

Well thanks dude.

hey bud, my downtrim isnt working, but uptrim is, evinrude 50hp. working fine up until i hit a sandbar & found i have corroded wires that have been replaced. Still no downtilt but have uptilt. kindve stumped. Still possible relay?

@cwulfoutdoors318

2 жыл бұрын

Hello and thanks for the question. You can test if it’s a relay by swapping them and seeing if the down trim is working and the up is not. If still the same outcome it might be the harness. I have a video after this one where I replaced that part. Good luck, hope it works.

@kwaks1979

Жыл бұрын

Same issue with same motor