If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. Fixing boats/Jet ski PlayList: kzread.info/head/PLjCXOz8TSkZlae2qY97uVVTm3JdBOUoRS&si=0QF9J0YNrNOKii3a ************ 1. Quicksilver Trim Limit and Sender switch kit: amzn.to/45GOIXb 2. Quicksilver Hydraulic Trim fluid: amzn.to/46Qq1Y5 3. Quicksilver anode Kit (888755Q04): amzn.to/3uIJ89d 4. Quicksilver grease gun: amzn.to/3uOFgDG 5. Alpha one gen 1 Trim Rams: amzn.to/3GwSt6C 6. Trim Ram Hydraulic Hoses: amzn.to/4a9rf3x amzn.to/486qVAE 7. Trim Ram plastic caps: amzn.to/3NlBV5b 8. Extreme Grease: amzn.to/46TgwY4 9. Outdrive anode bolt plug (19-47579): amzn.to/3NcHKSq *********** 1. Replace Mercruiser 3.0L Ignition Coil 2. Replace Mercruiser 3.0L Distributor Cap and Rotor 3. Replace Mercruiser 3.0L Spark Plugs and Wires 4. How to Air-Bleed your hydraulic Trim Rams and Hoses/lines kzread.info/dash/bejne/mZqLlcaQo7aym6g.html 5. Replace Mercruiser outdrive hydraulic Trim Solenoid kzread.info/dash/bejne/l5aJpbl-dtqdiNI.html 6. Replace Trim Limit and Sender Switches kzread.info/dash/bejne/qJ5-ptCmeqa0fJc.html 7. How to install outdrive to boat kzread.info/dash/bejne/epuBtamig8yocZc.html 8. How to replace Trim Rams and Hoses kzread.info/dash/bejne/oJ-XqLulZcWyZ8Y.html 9. Replace Anode kit kzread.info/dash/bejne/o62T08WlgJbghbQ.html 10. Replace outdrive bellows/shift cable (PART 1) kzread.info/dash/bejne/gJeDxLaIibvagbA.html 11. Outdrive upper unit rebuild (PART 1) kzread.info/dash/bejne/m2uitKyJkrW_gKw.html 12. Outdrive Lower unit rebuild (PART 1) kzread.info/dash/bejne/l5yIo5Z7gquapJs.html 13. How to replace outdrive Anode Kit kzread.info/dash/bejne/o62T08WlgJbghbQ.html 14. How to grease your outdrive grease fittings kzread.info/dash/bejne/aaVl1aSuYLfZgNo.html 👍😎

Honestly, this is a great video. thank you for taking the time to make this. It was beyond helpful for my issue.

@DIYwithMichaelBorders

Ай бұрын

Thank you, no joke. We very much appreciate the feedback. 😁👍🧰

Very good

@DIYwithMichaelBorders

6 ай бұрын

Hey thank you. Let us know if you have any questions. Looking forward to 2024, many more helpful boat and jet ski videos to come. 👍

When I try to go up or down I hear a clicking sound, and if I'm continuing trying to go up or down then it works, but it does it all the time. Do you think are the solenoids?

@DIYwithMichaelBorders

Ай бұрын

Good morning ☕️ great to hear from you again. Any update? How old is battery? It may be low battery voltage or weak battery. Below is a video showing our experience with this. kzread.info/dash/bejne/oGuG2MahqMy5ops.htmlsi=79B_9T7_94h3I7UI If battery is good and new, next likely cause is solenoids. Keep us posted.

Hi Mike, great video, thanks! I have done everything you have suggested but the motor still wont trim up. Trailer mode works fine. I dont know what else to try - any suggestions?

@DIYwithMichaelBorders

3 ай бұрын

Good morning ☕️ we appreciate you reaching out to us. Let’s get this figured out. Is your battery fully charged?

@tyewood3718

3 ай бұрын

@@DIYwithMichaelBorders as far as I know yes.

@DIYwithMichaelBorders

3 ай бұрын

@@tyewood3718 Thanks for the follow up. A weak battery will cause this. Do you hear clicking? Awhile back, we were so certain that our battery was strong enough to operate the electrical load of the hydraulic system…however we realized our battery was a dud. Check out our video link below, we talk more about this. kzread.info/dash/bejne/oGuG2MahqMy5ops.htmlsi=cEMkyxIwJLmDXrUa Keep us posted. 👍

@tyewood3718

3 ай бұрын

@@DIYwithMichaelBorders thanks Mike I’ll do that. No clicking. The trailoring switch works which is also what’s confusing me. I’ll get back to you though.

@DIYwithMichaelBorders

3 ай бұрын

@@tyewood3718 😎👍🧰

Mine will go down but not up? What’s the issue there?

@DIYwithMichaelBorders

Ай бұрын

Good morning ☕️ We can hopefully help. Sounds like you will need to replace your Hydraulic Trim Solenoid’s. Below is a link to our video showing this DIY project. kzread.info/dash/bejne/l5aJpbl-dtqdiNI.htmlsi=IFtnxwYIidfxiLlX Let’s start there, please keep us posted.

Hi Mike, Ive tried everything, and the motor still wont trim up. The green and blue wires when used on their own work fine. Inside the power lever the purple wire associated with the trim limit switch is connected to the "up" toggle switch on the power lever but doesnt seem to have any current running to it when I have checked the connections with a multi-meter. (Trim limiter is brand new and has been installed correctly - I think anyway.) The green wire is connected to the down and the blue is connected to the trailering switch. (which both work as normal) The strange thing is that everything was working perfectly a few months ago and then this problem just pooped up. Even with the motor running, supplying good charge to the battery it still wont trim up. I havent used the boat out on the water for some time, so im really at a loss. Any help would be great, thanks.

@DIYwithMichaelBorders

22 күн бұрын

@@tyewood3718 Good morning, any update? Is it working intermittently or is it completely not working? If it’s trimming intermittently…both up and down…it’s likely your Trim Solenoids. Have you noticed any hydraulic leaks anywhere along Trim system?

@quantumtechcrypto7080

22 күн бұрын

Check continuity of wires and all switches too. Mine were switched and limits. I bypassed wired directly and used my ears to know when limited.

@tyewood3718

22 күн бұрын

@@DIYwithMichaelBorders blue and green wires to trim up and down work perfectly. Purple wire connected to up trim button doesn’t seem to have power going to it. Checked all wires and they seem to be correct. New trim sender and limit switches installed. Battery good. 🤷🏼

@DIYwithMichaelBorders

19 күн бұрын

@@quantumtechcrypto7080 Thanks for the follow up.

@DIYwithMichaelBorders

17 күн бұрын

@@tyewood3718 Any update? We talked about it this morning and are leaning toward faulty Trim Solenoids…🤔