I would have dropped the Silver out of solution to make Silver Chloride with HCL. Because Silver is a carrier of Pt and Pd. By using the Copper sheet. Silver, Palladium and Platinum would all dropped out of the solution. So, add HCL to make Silver Chloride and then test the remaining solution with Stannous Chloride for Pt and Pd. You don't have to.. On if you want to..
@storieefoto2 жыл бұрын
Wouldn't it be better to use electrolysis for silver plated?
@ogbullion
2 жыл бұрын
Probably. But this scrap was realy thin and dissolved fast, I have a lot of silver plated cuttlery, in the future I make a video about reverse electroplating.
@mareecathie2476
2 жыл бұрын
I must admit, I would love to see a video of current best practice for reverse electroplating silver plate. The videos I have seen are pretty messy. I can get tons of silver plate so a reasonably quick, effective method would be good to see.
@reprocessors
Жыл бұрын
@@ogbullionhave u made any such video yet on reverse electro plating
@ilmarzeiger7292 жыл бұрын
👍🤗👍
@motolance49192 жыл бұрын
Is it okay to rinse the powder with tap water instead? Will it cause the powder to become impure and turn dark in colour?
@ogbullion
2 жыл бұрын
It's okay to rinse with tap water, not going to contaminate the silver but if you have residual silver nitrate its gonna create some silver chloride.
@motolance4919
2 жыл бұрын
@@ogbullion with that, can I use anti-chlorine into tap water instead?
@ogbullion
2 жыл бұрын
@@motolance4919 I don't know. Distilled water cheap.
@vincentrousseau81942 жыл бұрын
Hello friend good vidéo but be careful for safety. Do not forget that the supports towards breakage sooner or later uses a stainless steel pan. Sreetips méthode ?
@frantiseklaluch66052 жыл бұрын
Szia, nice pure silver just under 3 000 HUF, hardly worth chemicals, material, effort and time... well it is a hobby, just to get "own" silver... Percieved value is higher for sure... :-)
@aminullah.s9059 ай бұрын
Tembaga lapis perak tetapi Itu material dari barang bekas apa? Tidak jelas
Пікірлер: 22
Nice one
Nice 👍
You re silver is wheighted silver Réel good job
👍👍👍
I would have dropped the Silver out of solution to make Silver Chloride with HCL. Because Silver is a carrier of Pt and Pd. By using the Copper sheet. Silver, Palladium and Platinum would all dropped out of the solution. So, add HCL to make Silver Chloride and then test the remaining solution with Stannous Chloride for Pt and Pd. You don't have to.. On if you want to..
Wouldn't it be better to use electrolysis for silver plated?
@ogbullion
2 жыл бұрын
Probably. But this scrap was realy thin and dissolved fast, I have a lot of silver plated cuttlery, in the future I make a video about reverse electroplating.
@mareecathie2476
2 жыл бұрын
I must admit, I would love to see a video of current best practice for reverse electroplating silver plate. The videos I have seen are pretty messy. I can get tons of silver plate so a reasonably quick, effective method would be good to see.
@reprocessors
Жыл бұрын
@@ogbullionhave u made any such video yet on reverse electro plating
👍🤗👍
Is it okay to rinse the powder with tap water instead? Will it cause the powder to become impure and turn dark in colour?
@ogbullion
2 жыл бұрын
It's okay to rinse with tap water, not going to contaminate the silver but if you have residual silver nitrate its gonna create some silver chloride.
@motolance4919
2 жыл бұрын
@@ogbullion with that, can I use anti-chlorine into tap water instead?
@ogbullion
2 жыл бұрын
@@motolance4919 I don't know. Distilled water cheap.
Hello friend good vidéo but be careful for safety. Do not forget that the supports towards breakage sooner or later uses a stainless steel pan. Sreetips méthode ?
Szia, nice pure silver just under 3 000 HUF, hardly worth chemicals, material, effort and time... well it is a hobby, just to get "own" silver... Percieved value is higher for sure... :-)
Tembaga lapis perak tetapi Itu material dari barang bekas apa? Tidak jelas
1 kg silver plated spoon Distilled water. ML...??? Nitric acid. ML....???
@ogbullion
2 жыл бұрын
Not recommend this method for spoons. For spoons and other cuttlery the reverse electroplating the best choice.
@musiclover8309
2 жыл бұрын
OK bro
Batarya